Created
January 4, 2015 15:42
-
-
Save vishnubob/8ff5510d877fcb603d4d to your computer and use it in GitHub Desktop.
Shapeoko GRBL Settings
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| $0=40.020 (x, step/mm) | |
| $1=40.020 (y, step/mm) | |
| $2=320.000 (z, step/mm) | |
| $3=30 (step pulse, usec) | |
| $4=500.000 (default feed, mm/min) | |
| $5=500.000 (default seek, mm/min) | |
| $6=224 (step port invert mask, int:11100000) | |
| $7=255 (step idle delay, msec) | |
| $8=25.000 (acceleration, mm/sec^2) | |
| $9=0.050 (junction deviation, mm) | |
| $10=0.100 (arc, mm/segment) | |
| $11=25 (n-arc correction, int) | |
| $12=3 (n-decimals, int) | |
| $13=0 (report inches, bool) | |
| $14=1 (auto start, bool) | |
| $15=0 (invert step enable, bool) | |
| $16=0 (hard limits, bool) | |
| $17=0 (homing cycle, bool) | |
| $18=0 (homing dir invert mask, int:00000000) | |
| $19=25.000 (homing feed, mm/min) | |
| $20=250.000 (homing seek, mm/min) | |
| $21=100 (homing debounce, msec) | |
| $22=1.000 (homing pull-off, mm) | |
| ok |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
bonjour, j'aimerai des renseignements sur les paramètres Homing, Grand merci