Installing garmin express in linux with wine

garmin-express-wine.md

First we start by creating a wineprefix and installing our prerequisites from terminal:

WINEARCH=win32 WINEPREFIX=/home/$USER/GarminExpress winetricks dotnet452 vcrun2010 corefonts

WINEARCH=win32 WINEPREFIX=/home/$USER/GarminExpress winetricks win7

Note: You will be prompted during the setup for .NET installation just hit next and finish. Also, I like to seperate win7 after the prerequisites are setup to make sure the wineprefix runs in Windows 7 mode.

With that out of the way we need to download and install our GarminExpress.exe Setup executable. I downloaded mine from https://www.garmin.com/en-US/software/express

Run the GarminExpress.exe file in our wine prefix

WINEPREFIX=/home/$USER/GarminExpress wine explorer /desktop=garmin,1366x768 /home/$USER/Downloads/GarminExpress.exe

Note: If you downloaded the GarminExpress.exe to another location replace it above

Modify your shortcut to be the following command

WINEPREFIX=/home/$USER/GarminExpress wine explorer /desktop=garmin,1366x768 ‘/home/$USER/GarminExpress/drive_c/Program Files/Garmin/Express/express.exe’

Upon Launch you should see this screen which should recognize your Garmin device

Hello again.

I found a solution. The following alteration to the commands resolved the issue:

WINEARCH=win32 WINEPREFIX=/home/$USER/GarminExpress winetricks dotnet472 vcrun2010 corefonts d3dcompiler_47
WINEARCH=win32 WINEPREFIX=/home/$USER/GarminExpress winetricks win7
WINEPREFIX=/home/$USER/GarminExpress wine explorer /desktop=garmin,1366x768 /home/$USER/Downloads/GarminExpress.exe

Thanks! I was able to run GarminExpress this way, however it can't connect to my Zumo XT connected by USB while PC sees it and can browse files on it. Zumo XT in file browsing mode and displays GarminExpress logo. Any ideas? Something still missed? Install something or give wine some rights?

I have the same issue than @akontsevich, with the same steps, I am able to mount a D and E drive for the internal and SD storage of the Garmin NAVIGON I have but GarminExpress is not able to detect the device.

For those trying to get Garmin Express to work just to update the OS, note that even if you do, you'll need to create an account in order to connect the device. And their account creation blocks VPN's (at least mine). No way that I can see to update the OS otherwise.

Bought my Epix Pro Gen 2 new and it arrived on version 14 (version 19 is out now). I also can't get MTP to connect. Sorry, Garmin. Not good enough.