Intel e1000e fix - Proxmox

fix.md

Fix Intel e1000e error

Please note - you may want to validate whether the options used affect your setup.

Create a new service file.

nano /etc/systemd/system/disable-offloading.service

Paste the required information/command in the newly created service file - please change eth0 to your desired adapter.

[Unit]
Description=Disable NIC offloading
After=network.target

[Service]
Type=oneshot
ExecStart=/sbin/ethtool -K eth0 gso off gro off tso off tx off rx off rxvlan off txvlan off sg off
RemainAfterExit=true

[Install]
WantedBy=multi-user.target

Load the new service file and enable on reboot.

systemctl daemon-reexec && systemctl daemon-reload && systemctl enable disable-offloading.service

Thank you for this fix ... my NUC seems to have stabilised :-) I have created a PR for a Helper Script - community-scripts/ProxmoxVED#310

Hopefully this is accepted and will help others.

Thank you again, for the fix!

@rcastley Very interested in this helper script. I see in your link that the PR was accepted, where can I find the script link to try it in my environment?

@crypt0rr I tried your script, and the verification command, but I got a failure response. I wonder what I did wrong?

× disable-offloading.service - Disable NIC offloading
     Loaded: loaded (/etc/systemd/system/disable-offloading.service; enabled; preset: enabled)
     Active: failed (Result: exit-code) since Wed 2025-05-21 10:39:11 EDT; 3min 0s ago
    Process: 781 ExecStart=/sbin/ethtool -K eth0 gso off gro off tso off tx off rx off rxvlan off txvlan off sg off (code=exited, status=92)
   Main PID: 781 (code=exited, status=92)
        CPU: 1ms

Starting disable-offloading.service - Disable NIC offloading...
netlink error: no device matches name (offset 24)
netlink error: No such device
disable-offloading.service: Main process exited, code=exited, status=92/n/a
disable-offloading.service: Failed with result 'exit-code'.
Failed to start disable-offloading.service - Disable NIC offloading.

You probably need to edit the eth0 for the identity of your specific network card - in my case it was eno2

Indeed that was it. I haven't done something like this before so I had to search how to do this. For anyone who might be in a similar position, I used ip -a and found eno1 in the list.

@profucius

@rcastley Very interested in this helper script. I see in your link that the PR was accepted, where can I find the script link to try it in my environment?

The source for my PR is available here - https://raw.githubusercontent.com/rcastley/ProxmoxVED/refs/heads/main/tools/pve/nic-offloading-fix.sh

So you could run the following from your PVE shell:

bash -c "$(curl https://raw.githubusercontent.com/rcastley/ProxmoxVED/refs/heads/main/tools/pve/nic-offloading-fix.sh)"

@profucius

@rcastley Very interested in this helper script. I see in your link that the PR was accepted, where can I find the script link to try it in my environment?

The source for my PR is available here - https://raw.githubusercontent.com/rcastley/ProxmoxVED/refs/heads/main/tools/pve/nic-offloading-fix.sh

So you could run the following from your PVE shell:

bash -c "$(curl https://raw.githubusercontent.com/rcastley/ProxmoxVED/refs/heads/main/tools/pve/nic-offloading-fix.sh)"

Thank you so much for creating this, I ran your command and it worked perfectly.

Just confirming that this script worked perfectly for me too!

Thank you @profucius and @chrismaddahl ... just waiting for community-scripts to approve and merge 👍

Hallo Zusammen bei mir funktioniert der Skript leider nicht was läuft hier falsch bitte um hilfe bin neuling DANKE

@Dietmarjas The script has been accepted and merged into dev, so is now available here:

https://community-scripts.github.io/ProxmoxVED/scripts?id=nic-offloading-fix

Update: The helper script is now in the official repo :-)

https://community-scripts.github.io/ProxmoxVE/scripts?id=nic-offloading-fix