Andrii Miroshnychenko zentavr

These scripts allow you to have a wireguard connection in your initrd. Make sure you have wireguard installed on your system and a busybox which supports ip, nslookup. If it does not work, change the copy_exec line for busybox in the hook and replace it with a better one. It reads /etc/wireguard/initramdisk.conf and expects at least one comment specifying all ip addresses like so: # Address = 1.2.3.4/12. Tested on Ubuntu 19.10.

Map a virtual serial port on the guest(ttyS0) to a pseudo terminal(pty) on the host This has to be added to /etc/pve/qemu-server/VMID.conf:

args: -device isa-serial,chardev=myChardevice,id=s -chardev pty,id=myChardevice

After starting the VM check you will see a message:

char device redirected to /dev/pts/7 (label myChardevice)

Inside the guest, you should see now the serial port:

	global computerIsInUse, resetTime

	on run
	set computerIsInUse to true
	set resetTime to (do shell script "date +%s") as integer
	end run

	on idle
	set idleTime to (do shell script "ioreg -c IOHIDSystem \| awk '/HIDIdleTime/ {print $NF; exit}'") as integer
	if idleTime is greater than 7.4E+10 then

	---

	### For details see https://github.com/ansible/ansible/issues/22579


	### BEFORE

	---
	- name: Check freezer containers
	become: true

	#!/bin/sh
	# Script to be placed in /etc/initramfs-tools/hooks/ipv6

	PREREQ=""

	prereqs()
	{
	echo "$PREREQ"
	}

	# /etc/systemd/system/[email protected] by gatopeich

	#########
	# HowTo #
	#########
	#
	# - Copy this file to /etc/systemd/system/[email protected]
	#
	# - adduser --system --shell /bin/bash --home /opt/mcpe --group minecraft
	#

	SELECT table,
	formatReadableSize(sum(bytes)) as size,
	min(min_date) as min_date,
	max(max_date) as max_date
	FROM system.parts
	WHERE active
	GROUP BY table

	# install notes for ubuntu 14.04 / odroid xu4
	sudo apt-get install libgmp3-dev
	# dont apt-get StrongSwan! (its really old)
	wget https://download.strongswan.org/strongswan-5.5.1.tar.bz2
	tar xvfj strongswan-5.5.1.tar.bz2
	cd strongswan-5.5.1
	sudo ./configure --prefix=/usr --sysconfdir=/etc --enable-python-eggs --enable-python-eggs-install --enable-vici
	sudo make
	sudo make install

	#!/bin/bash
	#
	# Simple Main Logic Board (MLB) Serial Generator Script by TheRacerMaster
	# Based off the work of Hanger1, AGuyWhoIsBored & Alien:X
	# NOTE: This is a simple script that doesn't do any checking of other SMBIOS values. It needs valid SMBIOS data which includes the following:
	# - Valid SmUUID value in Clover config.plist under SMBIOS (generated using uuidgen)
	# - ROM value set to UseMacAddr0 in Clover config.plist (uses MAC address of your first NIC as ROM value)
	# - Properly formatted serial number (doesn't have to be a real one, just formatted properly) in Clover config.plist under SMBIOS
	# - Don't use a generic serial number (such as Clover's default)! It needs to be at least semi-unique.
	# - Try using a generated serial number that isn't real (but formatted correctly) from Clover Configurator, Chameleon Wizard, etc.