mbed_app.json for HelloMbedStepper - defines IN1, IN2, IN3, IN4 for different boards

mbed_app.json

{
    "macros": [ 
        "NDEBUG=1"
    ],
    "config": {
        "pin1_name": {
            "help": "Pin1 for stepper motor controller",
            "macro_name": "IN1",
            "required": true
        },
        "pin2_name": {
            "help": "Pin2 for stepper motor controller",
            "macro_name": "IN2",
            "required": true
        },
        "pin3_name": {
            "help": "Pin3 for stepper motor controller",
            "macro_name": "IN3",
            "required": true
        },
        "pin4_name": {
            "help": "Pin4 for stepper motor controller",
            "macro_name": "IN4",
            "required": true
        }
    },
    "target_overrides": {
        "LPC1768": {
            "pin1_name": "p12",
            "pin2_name": "p13",
            "pin3_name": "p15",
            "pin4_name": "p16",
            "target.features_remove": ["LWIP"],
            "target.device_has_remove": ["ERROR_PATTERN", "LOCALFILESYSTEM", "SEMIHOST", "STDIO_MESSAGES"]
        },
        "NUCLEO_F024K6": {
            "pin1_name": "D9",
            "pin2_name": "D10",
            "pin3_name": "D11",
            "pin4_name": "D12"
        },
        "RBLAB_BLENANO": {
            "pin1_name": "D2",
            "pin2_name": "D1",
            "pin3_name": "D0",
            "pin4_name": "D3"
        }
    }
}