Disable WAN Interface on CARP Backup

10-wancarp

#!/usr/local/bin/php
<?php

require_once("config.inc");
require_once("interfaces.inc");
require_once("util.inc");

$subsystem = !empty($argv[1]) ? $argv[1] : '';
$type = !empty($argv[2]) ? $argv[2] : '';

if ($type != 'MASTER' && $type != 'BACKUP') {
    log_error("Carp '$type' event unknown from source '{$subsystem}'");
    exit(1);
}

if (!strstr($subsystem, '@')) {
    log_error("Carp '$type' event triggered from wrong source '{$subsystem}'");
    exit(1);
}

$ifkey = 'wan';

if ($type === "MASTER") {
    log_error("enable interface '$ifkey' due CARP event '$type'");
    $config['interfaces'][$ifkey]['enable'] = '1';
    write_config("enable interface '$ifkey' due CARP event '$type'", false);
    interface_configure(false, $ifkey, false, false);
} else {
    log_error("disable interface '$ifkey' due CARP event '$type'");
    unset($config['interfaces'][$ifkey]['enable']);
    write_config("disable interface '$ifkey' due CARP event '$type'", false);
    interface_configure(false, $ifkey, false, false);
}

Has anyone tried this on 25.x yet? Either I'm being very dumb or there's a bug where additional scripts in /usr/local/etc/rc.syshook.d/carp/ are not executed. If I move the code to 20-openvpn it works. If I copy all the code from 20-openvpn into 10-wancarp it does not execute. Permissions should be correct

Am I missing something obvious?

I'm also seeing the same issue on 25.1.8_1, did you ever find a solution?

Has anyone tried this on 25.x yet? Either I'm being very dumb or there's a bug where additional scripts in /usr/local/etc/rc.syshook.d/carp/ are not executed. If I move the code to 20-openvpn it works. If I copy all the code from 20-openvpn into 10-wancarp it does not execute. Permissions should be correct

Am I missing something obvious?

I'm also seeing the same issue on 25.1.8_1, did you ever find a solution?

Got this fixed. The #! has to be the first line in the script and I had a comment above it

Has anyone tried this on 25.x yet? Either I'm being very dumb or there's a bug where additional scripts in /usr/local/etc/rc.syshook.d/carp/ are not executed. If I move the code to 20-openvpn it works. If I copy all the code from 20-openvpn into 10-wancarp it does not execute. Permissions should be correct

Am I missing something obvious?

I'm also seeing the same issue on 25.1.8_1, did you ever find a solution?

Got this fixed. The #! has to be the first line in the script and I had a comment above it

Glad you were able to fix it. My problem was some encoding issue uploading through scp. Once I created and edited the files directly on the router things worked as expected.

I was vibing this. havent tried it yet

#!/usr/local/bin/php
<?php
/*
 * OPNsense HA Failover Script for Single Static WAN IP
 *
 * Manages a single static WAN IP in a High Availability cluster,
 * ensuring the backup node retains internet access via the master and
 * that stateful connections fail over cleanly.
 *
 * v2.1 - 2025-07-15
 * - Integrated user feedback for robust multi-VIP support.
 * - Added lock file to prevent race conditions.
 * - Replaced raw exec() with mwexecf() for security.
 * - Replaced manual route manipulation with system_default_route() for robustness.
 * - Added state killing on BACKUP event for seamless failover.
 * - Implemented verbose, configurable logging.
 * - Added error handling and cleanup routines.
 */

// #################### CONFIGURATION ####################
// The logical interface name for your WAN (e.g., 'wan').
$ifkey = 'wan';
// The CARP VIP on your LAN for gateway redirection.
$lan_vip_v4 = '10.0.1.1';
$lan_vip_v6 = '2006::1';
// Set to 'true' for detailed logging in System -> Log Files -> General.
$verbose_logging = true;
// Path for the lock file to prevent concurrent execution.
$lock_file = '/tmp/wan_failover.lock';
// #######################################################

// Required OPNsense libraries
require_once("config.inc");
require_once("interfaces.inc");
require_once("util.inc");
require_once("system.inc");

// --- Helper Functions ---

/**
 * Custom logger for this script.
 * @param string $message The message to log.
 */
function log_failover($message)
{
    global $verbose_logging;
    if ($verbose_logging) {
        log_msg("WAN Failover: ". $message, LOG_NOTICE);
    }
}

// --- Main Execution ---

// Ensure the lock file is removed on script exit
register_shutdown_function(function () use ($lock_file) {
    if (file_exists($lock_file)) {
        unlink($lock_file);
    }
});

// Prevent concurrent execution
$lock_handle = fopen($lock_file, 'w');
if ($lock_handle === false ||!flock($lock_handle, LOCK_EX | LOCK_NB)) {
    log_msg("WAN Failover: Script is already running. Exiting to prevent race condition.", LOG_WARNING);
    exit(1);
}

// Read CARP event arguments
$subsystem =!empty($argv[1])? $argv[1] : '';
$type =!empty($argv[2])? $argv[2] : '';

// Exit if the event type isn't one we care about.
if (!in_array($type,)) {
    log_failover("Ignoring event type '{$type}' on '{$subsystem}'.");
    exit(0);
}

// Exit if the event source isn't a CARP VIP
if (!strstr($subsystem, '@')) {
    log_msg("WAN Failover: Script triggered from non-CARP source '{$subsystem}'. Ignoring.", LOG_WARNING);
    exit(1);
}

global $config;

if ($type === "MASTER") {
    /**********************
     * BECOME MASTER NODE *
     **********************/
    log_msg("WAN Failover: CARP MASTER event on {$subsystem}. Enabling WAN interface.", LOG_NOTICE);

    // Set WAN interface to be enabled with its static IP config
    log_failover("Setting interface '{$ifkey}' to enabled and ipaddr 'static'.");
    $config['interfaces'][$ifkey]['enable'] = true;
    $config['interfaces'][$ifkey]['ipaddr'] = 'static';
    write_config("WAN Failover: Set {$ifkey} to enabled (MASTER)", false);

    // Apply the interface configuration. This brings the interface up, assigns the static IP,
    // and triggers a routing recalculation to set the default gateway to the ISP.
    log_failover("Applying interface configuration for '{$ifkey}'.");
    interface_configure(false, $ifkey, true, false);

    // Explicitly reconfigure routing to ensure a clean state.
    log_failover("Triggering system routing configuration.");
    system_routing_configure();

} else { // Handles "BACKUP" state
    /**********************
     * BECOME BACKUP NODE *
     **********************/
    log_msg("WAN Failover: CARP BACKUP event on {$subsystem}. Disabling WAN IP and rerouting traffic.", LOG_NOTICE);

    // This is the critical step for seamless failover. Kill all firewall states
    // that are associated with traffic going through the WAN interface. This forces
    // clients to re-establish their connections through the new master.
    log_failover("Killing states on interface '{$ifkey}' to ensure clean failover.");
    mwexecf('/sbin/pfctl -i %s -F states', [$ifkey]);

    // Set WAN IPv4 to "none" to release the static IP but keep the interface link up.
    log_failover("Setting interface '{$ifkey}' ipaddr to 'none'.");
    $config['interfaces'][$ifkey]['ipaddr'] = 'none';
    unset($config['interfaces'][$ifkey]['enable']);
    write_config("WAN Failover: Set {$ifkey} IP to none (BACKUP)", false);

    // Apply the interface configuration without a full reload to avoid routing conflicts.
    log_failover("Applying light interface configuration for '{$ifkey}'.");
    interface_configure(false, $ifkey, false, false);

    // Find the real LAN interface to use for the gateway by searching all VIPs.
    $lan_if = null;
    foreach ($config['virtualip']['vip'] as $vip) {
        if (isset($vip['subnet']) && $vip['subnet'] == $lan_vip_v4) {
            $lan_if = $vip['interface'];
            break;
        }
    }

    if ($lan_if) {
        $real_lan_if = get_real_interface($lan_if);
        log_failover("Rerouting default gateways through LAN VIPs on interface '{$real_lan_if}'.");

        // Reroute IPv4 default gateway
        $gw_v4 = ['gateway' => $lan_vip_v4, 'if' => $real_lan_if];
        system_default_route($gw_v4,);

        // Reroute IPv6 default gateway
        $gw_v6 = ['gateway' => $lan_vip_v6, 'if' => $real_lan_if];
        system_default_route($gw_v6,);
    } else {
        log_msg("WAN Failover: Could not find LAN interface for VIP {$lan_vip_v4}. Cannot set backup gateway.", LOG_ERR);
    }
}

log_failover("Script finished for event '{$type}'.");
exit(0);
?>

Deployment and Verification
The following steps should be performed on both nodes of the HA cluster:

• Placement: Place the refactored script, named 10-wan-failover.php, in the directory /usr/local/etc/rc.syshook.d/carp/.
• Configuration: Edit the script's configuration section to match your environment's WAN interface key ($ifkey) and LAN CARP VIP addresses ($lan_vip_v4, $lan_vip_v6).
• Permissions: Set the execute permission on the script file: chmod +x /usr/local/etc/rc.syshook.d/carp/10-wan-failover.php.

To test the failover functionality:

• Navigate to Interfaces -> Virtual IPs -> Status on the current MASTER node.
• Click the "Enter Persistent CARP Maintenance Mode" button. This will force the node into a permanent BACKUP state and trigger a failover.
• Observe the system logs (System -> Log Files -> General) on the BACKUP node. You should see log entries from the "WAN Failover" script indicating the transition to MASTER.
• On the new MASTER node, verify the routing table using the shell command netstat -rn. The default route should now point out the physical WAN interface to your ISP's gateway.
• On the old MASTER node (now in maintenance mode), verify its routing table. The default route should now point to your LAN CARP VIP.
• From a client machine on the LAN, test outbound connectivity (e.g., browse a website, run a continuous ping). The transition should be nearly seamless, though new connections may have a brief delay.
• To test failback, click "Leave Persistent CARP Maintenance Mode" on the original MASTER node. The system should revert to its original state.