Sublime Text 3: Default Preferences JSON

sublime-text-3_default-preferences.json

// Place your settings in the file "Packages/User/Preferences.sublime-settings",
// which overrides the settings in here.
//
// Settings may also be placed in syntax-specific setting files, for
// example, in Packages/User/Python.sublime-settings for python files.
{
	// Sets the colors used within the text area.
	// The value "auto" will switch between the "light_color_scheme" and
	// "dark_color_scheme" based on the operating system appearance.
	"color_scheme": "auto",

	// Controls the "color_scheme" when set to "auto"
	"light_color_scheme": "Packages/Materialize/schemes/Material Primer Light.tmTheme",
	"dark_color_scheme": "Packages/Materialize/schemes/Material Spaceblack Oceanic.tmTheme",

	// Note that the font_face and font_size are overridden in the platform
	// specific settings file, for example, "Preferences (Linux).sublime-settings".
	// Because of this, setting them here will have no effect: you must set them
	// in your User File Preferences.
	"font_face": "Fira Code Retina",
	"font_size": 12,

	// Valid options on all platforms are:
	//  - "no_bold": Disables bold text
	//  - "no_italic": Disables italic text
	// Antialiasing options:
	//  - "no_antialias": Disables antialiasing
	//  - "gray_antialias": Uses grayscale antialiasing instead of subpixel
	// Ligature options:
	//  - "no_liga": Disables standard ligatures (OpenType liga feature)
	//  - "no_clig": Disables contextual ligatures (OpenType clig feature)
	//  - "no_calt": Disables contextual alternatives (OpenType calt feature)
	//  - "dlig": Enables discretionary ligatures (OpenType dlig feature)
	//  - "ss01": Enables OpenType stylistic set 1. Can enable sets 1 to 10
	//        by changing the last two digits.
	// Windows-only options:
	//  - "directwrite": (default) Use DirectWrite for font rendering
	//  - "gdi": Use GDI for font rendering
	//  - "dwrite_cleartype_classic": Only applicable to "directwrite" mode,
	//        should render fonts similar to traditional GDI
	//  - "dwrite_cleartype_natural": Only applicable to "directwrite" mode,
	//        should render fonts similar to ClearType "natural quality" GDI
	//  - "subpixel_antialias": Force ClearType antialiasing when disabled
	//        at system level
	// Mac-only options:
	//  - "no_round": Don't round glyph widths for monospace fonts when
	//        "font_size" is small.
	"font_options": [
		"directwrite",
		"dwrite_cleartype_natural",
		"subpixel_antialias"
	],
	// Font options for theme text. Valid options are the same as
	// "font_options", except "no_bold" and "no_italic" are not supported
	"theme_font_options": [
		"directwrite",
		"subpixel_antialias"
	],

	// Characters that are considered to separate words
	"word_separators": "./\\()\"'-:,.;<>~!@#$%^&*|+=[]{}`~?",

	// Characters that are considered to separate sub-words
	"sub_word_separators": "_",

	// Set to false to prevent line numbers being drawn in the gutter
	"line_numbers": true,

	// Set to false to hide the gutter altogether
	"gutter": true,

	// Spacing between the gutter and the text
	"margin": 4,

	// Fold buttons are the triangles shown in the gutter to fold regions of text
	"fold_buttons": true,

	// Hides the fold buttons unless the mouse is over the gutter
	"fade_fold_buttons": true,

	// Indicate modified lines in the gutter
	// - true: Enables modified line indicators on all files
	// - "auto": Enables modified line indicators on tracked files within Git
	// - false: Disables modified line indicators
	"mini_diff": true,

	// Columns in which to display vertical rulers. You can also pair the column
	// with a ruler style (See "ruler_style"), eg: [[80, "solid"]]
	"rulers": [
		80, 160, 320
	],

	// Controls how ruler lines are drawn
	// - "dotted": Drawn as a dotted line
	// - "stippled": Drawn as a stippled line
	// - "solid": Drawn as a solid line
	"ruler_style": "dotted",

	// Set to true to turn spell checking on by default
	"spell_check": false,

	// The number of spaces a tab is considered equal to
	"tab_size": 4,

	// Set to true to insert spaces when tab is pressed
	"translate_tabs_to_spaces": true,

	// If translate_tabs_to_spaces is true, use_tab_stops will make tab and
	// backspace and delete insert/delete up to the next tabstop
	"use_tab_stops": true,

	// Set to false to disable detection of tabs vs. spaces on load
	"detect_indentation": true,

	// Calculates indentation automatically when pressing enter
	"auto_indent": true,

	// Makes auto indent a little smarter, e.g., by indenting the next line
	// after an if statement in C. Requires auto_indent to be enabled.
	"smart_indent": true,

	// Adds whitespace up to the first open bracket when indenting. Requires
	// auto_indent to be enabled.
	"indent_to_bracket": false,

	// Trims white space added by auto_indent when moving the caret off the
	// line.
	"trim_automatic_white_space": true,

	// Disables horizontal scrolling if enabled.
	// May be set to true, false, or "auto", where it will be disabled for
	// source code, and otherwise enabled.
	"word_wrap": "auto",

	// Set to a value other than 0 to force wrapping at that column rather than
	// the window width. See "wrap_width_style" for extra options.
	"wrap_width": 0,

	// Controls how the "wrap_width" setting is applied. The following options
	// are available:
	// - "constant": Always wrap at exactly the wrap width.
	// - "min": Wrap at the wrap width or less if there is less space available.
	"wrap_width_style": "constant",

	// Set to false to prevent word wrapped lines from being indented to the same
	// level
	"indent_subsequent_lines": true,

	// Draws text centered in the window rather than left aligned
	"draw_centered": false,

	// Controls auto pairing of quotes, brackets etc
	"auto_match_enabled": true,

	// Automatically close HTML and XML tags when </ is entered.
	"auto_close_tags": true,

	// Word list to use for spell checking. May also be a list of dictionaries.
	"dictionary": "Packages/Language - English/en_US.dic",

	// Sets which scopes are checked for spelling errors
	"spelling_selector": "markup.raw, source string.quoted - punctuation - meta.preprocessor.include, source comment - source comment.block.preprocessor, -(source, constant, keyword, storage, support, variable, markup.underline.link, meta.tag)",

	// Set to true to draw a border around the visible rectangle on the minimap.
	// The color of the border will be determined by the "minimap_border" key
	// in the color scheme
	"draw_minimap_border": false,

	// Always visualise the viewport on the minimap, as opposed to only
	// showing it on mouse over
	"always_show_minimap_viewport": false,

	// Whether the minimap should scroll horizontally to match the viewport.
	"minimap_horizontal_scrolling": false,

	// If enabled, will highlight any line with a caret
	"highlight_line": false,

	// If enabled, will highlight the gutter for any line with a caret
	"highlight_gutter": true,

	// If enabled, will highlight the line number in the gutter for any line
	// with a caret depending on the color scheme
	"highlight_line_number": true,

	// Valid values are "smooth", "phase", "blink" and "solid". Previous
	// versions of Sublime Text used "smooth" by default.
	"caret_style": "phase",

	// These settings control the size of the caret
	"caret_extra_top": 4,
	"caret_extra_bottom": 1,
	"caret_extra_width": 1,

	// When enabled, the caret will be drawn as a rectangle, using the width
	// of the current character
	"block_caret": false,

	// Set to false to disable underlining the brackets surrounding the caret
	"match_brackets": true,

	// Set to false if you'd rather only highlight the brackets when the caret is
	// next to one
	"match_brackets_content": true,

	// Set to false to not highlight square brackets. This only takes effect if
	// match_brackets is true
	"match_brackets_square": true,

	// Set to false to not highlight curly brackets. This only takes effect if
	// match_brackets is true
	"match_brackets_braces": true,

	// Set to false to not highlight angle brackets. This only takes effect if
	// match_brackets is true
	"match_brackets_angle": false,

	// Enable visualization of the matching tag in HTML and XML
	"match_tags": true,

	// Highlights other occurrences of the currently selected text
	"match_selection": true,

	// Additional spacing at the top of each line, in pixels
	"line_padding_top": 4,

	// Additional spacing at the bottom of each line, in pixels
	"line_padding_bottom": 4,

	// Set to false to disable scrolling past the end of the buffer.
	// On Mac, this value is overridden in the platform specific settings, so
	// you'll need to place this line in your user settings to override it.
	//
	// This setting may also be set to a number between 0.0 and 1.0 to specify
	// how much scrolling past the end of the buffer should be allowed. 0.5
	// scrolls halfway and 0.0 is the same as false.
	"scroll_past_end": true,

	// Set the number of context lines to show when scrolling to reveal. This
	// affects all selection changes, like selection dragging, page-up/page-down
	// and moving the caret.
	"scroll_context_lines": 3,

	// This controls what happens when pressing up or down when on the first
	// or last line.
	// On Mac, this value is overridden in the platform specific settings, so
	// you'll need to place this line in your user settings to override it.
	"move_to_limit_on_up_down": true,

	// Controls when white space is drawn. Any of the following options may be
	// combined:
	// - "selection": Draw white space under the current selection.
	// - "leading": Draw any white space between the beginning of a line and the
	//              first character.
	// - "enclosed": Draw white space enclosed by other characters.
	// - "trailing": Draw white space following the last character on a line.
	// - "isolated": Draw white space on lines containing no other characters.
	// - "all": All of the above, ie. always draw white space.
	//
	// These options may be further refined by appending any of the following
	// separated by an underscore:
	// - "none": Don't draw this kind of white space.
	// - "tabs": Only draw tabs here.
	// - "spaces": Only draw spaces here.
	// - "mixed": Only draw white space that does not match the indentation
	//            style. For example if "translate_tabs_to_spaces" is true only
	//            draw tabs.
	// - "mixed_tabs": Like "mixed" but only draw tabs.
	// - "mixed_spaces": Like "mixed" but only draw spaces.
	// - "all": Draw both tabs and spaces. This is the default.
	//
	// Note that options are applied in sequence. So a later option may override
	// an earlier one.
	//
	// Examples:
	// - ["selection", "trailing", "isolated"]:
	//     Draw white space at the end of any lines and under the selection.
	//
	// - ["all_tabs", "selection"]:
	//     Draw tabs anywhere and any white space under the selection.
	//
	// - ["all_mixed"]:
	//     Draw any white space that does not match the indentation style.
	//
	// - ["leading_mixed", "isolated_mixed"]:
	//     Draw any indentation that does not match the indentation style.
	//
	// - ["selection_mixed_tabs"]:
	//     Draw only tabs under the selection and only if the indentation style
	//     is spaces.
	//
	// - ["all_tabs", "selection"]:
	//     Draw all tabs and any white space under the selection.
	//
	// - ["all", "selection_none"]:
	//     Inverse of the default. Draw white space everywhere except under the
	//     selection.
	"draw_white_space": [
		"selection",
		"trailing",
		"isolated"
	],

	// Controls how non-ascii white space is drawn.
	// - "none": Draw unicode white space verbatim, eg. hiding zero-width
	//           spaces.
	// - "punctuation": Draw codepoints of unicode white space defined as
	//                  punctuation. This includes NBSP, but excludes the CJK
	//                  Ideographic Space.
	// - "all": Draw codepoints of all non-ascii space characters.
	"draw_unicode_white_space": "punctuation",

	// Controls whether unicode bidi characters are drawn as codepoints.
	"draw_unicode_bidi": true,

	// Control characters (or white space if enabled) can be drawn as either hex
	// or using their abbreviation:
	// - "hex": Draw characters using their hex encoding, ie. <0xA0>
	// - "names": Draw characters using their abbreviation, ie. <NBSP>
	"control_character_style": "hex",

	// Controls what type of columns selection description ("Line X, Column Y"
	// in the status bar) uses:
	// - "virtual": Count virtual columns. Tabs count as their width in spaces.
	// - "real": Count real columns. Tabs count as one column.
	"selection_description_column_type": "virtual",

	// Set to false to turn off the indentation guides.
	// The color and width of the indent guides may be customized by editing
	// the corresponding .tmTheme file, and specifying the colors "guide",
	// "activeGuide" and "stackGuide"
	"draw_indent_guides": true,

	// Controls how the indent guides are drawn. Options may be combined, with
	// valid options being:
	//  - "draw_normal" - will draw plain indent guides for every indentation
	//    group
	//  - "draw_active" - will draw indent guides for the group
	//    containing the caret in a different color
	//  - "draw_active_single" - will draw the right-most indent guide in the
	//    group containing the caret in a different color
	//  - "solid" - can be combined with any of the draw_* options to draw
	//    solid instead of stippled lines
	"indent_guide_options": [
		"draw_normal",
		"draw_active"
	],

	// Controls where trailing white space is removed on save.
	// - "none": Do not remove any trailing white space on save.
	// - "all": Remove all trailing white space on save.
	// - "not_on_caret": Only remove white space that won't affect the caret.
	//                   When used in conjunction with "save_on_focus_lost" and
	//                   certain desktop environments that frequently make the
	//                   application lose focus this avoids the caret jumping
	//                   around a lot.
	"trim_trailing_white_space_on_save": "all",

	// Only trim white space on save for the parts of a file that have been
	// modified by you. If there is trailing white space in other parts of the
	// file they are left alone.
	"trim_only_modified_white_space": false,

	// Set to true to ensure the last line of the file ends in a newline
	// character when saving
	"ensure_newline_at_eof_on_save": true,

	// Set to true to automatically save files when switching to a different file
	// or application
	"save_on_focus_lost": false,

	// The encoding to use when the encoding can't be determined automatically.
	// ASCII, UTF-8 and UTF-16 encodings will be automatically detected.
	"fallback_encoding": "Western (Windows 1252)",

	// Encoding used when saving new files, and files opened with an undefined
	// encoding (e.g., plain ascii files). If a file is opened with a specific
	// encoding (either detected or given explicitly), this setting will be
	// ignored, and the file will be saved with the encoding it was opened
	// with.
	"default_encoding": "UTF-8",

	// Files containing null bytes are opened as hexadecimal by default
	"enable_hexadecimal_encoding": true,

	// Determines what character(s) are used to terminate each line in new files.
	// Valid values are 'system' (whatever the OS uses), 'windows' (CRLF) and
	// 'unix' (LF only).
	"default_line_ending": "unix",

	// When enabled, hovering over a word will show a popup listing all
	// possible locations for the definition symbol. Requires index_files.
	"show_definitions": true,

	// When enabled, pressing tab will insert the best matching completion.
	// When disabled, tab will only trigger snippets or insert a tab.
	// Shift+tab can be used to insert an explicit tab when tab_completion is
	// enabled.
	"tab_completion": true,

	// Enable auto complete to be triggered automatically when typing.
	"auto_complete": true,

	// The maximum file size where auto complete will be automatically triggered.
	"auto_complete_size_limit": 134217728, // 128MiB

	// The delay, in ms, before the auto complete window is shown after typing
	"auto_complete_delay": 50,

	// Controls what scopes auto complete will be triggered in
	"auto_complete_selector": "meta.tag, source - comment - string.quoted.double.block - string.quoted.single.block - string.unquoted.heredoc",

	// Additional situations to trigger auto complete
	"auto_complete_triggers":
	[
		{"selector": "text.html, text.xml", "characters": "<",},
		{"selector": "punctuation.accessor", "rhs_empty": true,},
	],

	// By default, auto complete will commit the current completion on enter.
	// This setting can be used to make it complete on tab instead.
	// Completing on tab is generally a superior option, as it removes
	// ambiguity between committing the completion and inserting a newline.
	"auto_complete_commit_on_tab": false,

	// Controls if auto complete is shown when snippet fields are active.
	// Only relevant if auto_complete_commit_on_tab is true.
	"auto_complete_with_fields": false,

	// Controls what happens when pressing the up key while the first item in
	// the auto complete window is selected: if false, the window is hidden,
	// otherwise the last item in the window is selected. Likewise for the
	// down key when the last item is selected.
	"auto_complete_cycle": true,

	// Auto complete will used indexed data to provide completions from other
	// files when this is enabled
	"auto_complete_use_index": true,

	// If previously-selected completions should be automatically selected
	"auto_complete_use_history": true,

	// Controls how the auto complete results are reordered when typing:
	// - "none" will fully reorder the results according to how well the
	//   completion matches the typed text.
	// - "some" will partially reorder the results, taking into account how
	//   well the completion matches whats typed, and likelihood of the
	//   completion.
	// - "strict" will never reorder the results.
	"auto_complete_preserve_order": "some",

	// Add trailing symbols (e.g., '.', '()') if the auto complete engine
	// thinks they're likely enough
	"auto_complete_trailing_symbols": true,

	// Add a space after completions if the auto complete engine thinks
	// they're likely enough
	"auto_complete_trailing_spaces": true,

	// Snippets will not be included in the auto complete when this is
	// false. They can still be triggered by typing their tab trigger in, and
	// pressing tab when auto complete is not showing.
	"auto_complete_include_snippets": true,

	// When this is set to false, snippets won't be present in the auto
	// complete dialog when typing, instead they'll only be shown in the auto
	// complete dialog when it's explicitly triggered
	"auto_complete_include_snippets_when_typing": true,

	// Syntax will not be detected for files larger than this size. This makes
	// loading large files significantly faster. Set to 0 to always perform
	// syntax detection. The default is 16MiB.
	"syntax_detection_size_limit": 268435456, // 256MiB

	// A list of wildcard patterns specifying which snippet files to ignore.
	// For example, to ignore all the default C++ snippets, set this to
	// ["C++/*"]
	"ignored_snippets": [],

	// These settings hide various parts of the UI automatically when typing.
	// Moving the mouse will show them again.
	"auto_hide_menu": false,
	"auto_hide_tabs": false,
	"auto_hide_status_bar": false,

	// Related to auto_hide_tabs, if this is enabled, tabs will be momentarily
	// displayed when switching files. Tabs will automatically hidden upon
	// resuming typing or after a fixed amount of time.
	"reveal_tabs_with_timeout": false,

	// When false, disables alt-tapping revealing the menu when hidden on Linux
	// and Windows. Does not affect auto hiding or toggling the menu through
	// the command palette.
	"reveal_menu": true,

	// If true, when typing the mouse pointer/cursor will be hidden. Moving the
	// pointer will unhide it. This setting has no effect on macOS.
	"hide_pointer_while_typing": true,

	// By default, shift+tab will only unindent if the selection spans
	// multiple lines. When pressing shift+tab at other times, it'll insert a
	// tab character - this allows tabs to be inserted when tab_completion is
	// enabled. Set this to true to make shift+tab always unindent, instead of
	// inserting tabs.
	"shift_tab_unindent": true,

	// If true, the copy and cut commands will operate on the current line
	// when the selection is empty, rather than doing nothing.
	"copy_with_empty_selection": true,

	// If true, the selected text will be copied into the find panel when it's
	// shown.
	// On Mac, this value is overridden in the platform specific settings.
	"find_selected_text": true,

	// When auto_find_in_selection is enabled, the "Find in Selection" flag will
	// be enabled automatically when multiple lines of text are selected.
	// "find_only" or "replace_only" may also be used to only enable this
	// behavior for the find or replace panel respectively.
	"auto_find_in_selection": false,

	// This determines whether the find panel is closed when the "Find All"
	// or "Replace All" buttons are pressed. Note this does not change the
	// keybinding behavior.
	"close_find_after_find_all": true,
	"close_find_after_replace_all": true,

	// Whether to highlight find results in the scrollbar
	"highlight_find_results_in_scrollbar": true,

	// The maximum number of find results to show in the scroll bar. If this
	// number is exceeded no results will be shown. Use 0 to remove this limit.
	"find_scroll_highlights_limit": 0, // Default: 8192

	// The maximum file size that the "Highlight matches" option is used for.
	// Highlighting all matches requires searching the whole file while typing
	// the search query which can quickly get slow. Use 0 to remove this limit.
	"find_highlight_matches_max_size": 134217728, // 128MiB

	// Same as "find_highlight_matches_max_size" but used when regex is enabled.
	"find_regex_highlight_matches_max_size": 67108864, // 64MiB

	// The maximum output size for find-in-files. Prevents searches with a large
	// number of results from using too much memory. Use 0 to remove this limit.
	"find_in_files_max_result_size": 268435456, // 256MiB

	// Files over this size will be skipped. This prevents searches from using
	// up all available memory when large files are present. Note that on
	// computers with many cores more than one file will be loaded at once. Use
	// 0 to remove this limit.
	"find_in_files_max_file_size": 1073741824, // 1024MiB

	// When drag_text is enabled, clicking on selected text will begin a
	// drag-drop operation.
	"drag_text": false,

	// Take focus when a file is dragged and dropped onto Sublime Text. On
	// Windows this value is overidden to true in the platform specific
	// settings.
	"focus_on_file_drop": false,

	//
	// User Interface Settings
	//

	// The theme controls the look of Sublime Text's UI (buttons, tabs, scroll
	// bars, etc)
	// The value "auto" will switch between the "light_theme" and "dark_theme"
	// based on the operating system appearance.
	"theme": "Adaptive.sublime-theme",

	// Controls the "theme" when to "auto"
	"light_theme": "Default.sublime-theme",
	"dark_theme": "Default Dark.sublime-theme",

	// Adaptive theme only: controls if a custom or default title bar is used.
	// Note that on Windows, the hamburger menu is used whenever this is
	// enabled and the adaptive theme is in use.
	"themed_title_bar": true,

	// Controls the style of file tabs for the Default, Default Dark, and
	// Adaptive themes.
	// Options: "rounded", "square"
	//   The value "angled" provides the tab style from Sublime Text 3, but is
	//   only compatible with the Default and Adaptive themes, and will not
	//   support new features like inactive pane dimming.
	"file_tab_style": "rounded",

	// If inactive sheets should have their background slightly modified to
	// make input focus more obvious.
	"inactive_sheet_dimming": true,

	// Set to 0 to disable smooth scrolling. Set to a value between 0 and 1 to
	// scroll slower, or set to larger than 1 to scroll faster
	"scroll_speed": 1.5,

	// Controls sidebar animation when expanding or collapsing folders
	"tree_animation_enabled": true,

	// Controls animation throughout the application
	"animation_enabled": true,

	// Makes tabs with modified files more visible
	"highlight_modified_tabs": true,

	// Hides the tab close button when false
	"show_tab_close_buttons": true,

	// Determines which side the close button is on
	"show_tab_close_buttons_on_left": false,

	// Show folders in the sidebar in bold
	"bold_folder_labels": true,

	// Draw divider lines between sections of the UI when using the Adaptive theme
	"adaptive_dividers": false,

	// Draw shadows under popup windows
	"popup_shadows": true,

	// Mac only. Controls use of macOS tabs in 10.12 and newer. Each native tab
	// contains an entire project, thus allowing multiple projects in a single
	// window. Valid values are "system", "preferred" and "disabled".
	"native_tabs": "system",

	// Whether new tabs should favor opening after the current tab or at the end
	// of the list of tabs.
	"open_tabs_after_current": true,

	// Valid values are "system", "enabled" and "disabled"
	"overlay_scroll_bars": "enabled",

	// Allows tabs to scroll left and right, instead of simply shrinking
	"enable_tab_scrolling": true,

	// Hides the buttons for scrolling tabs left/right, requiring use of a
	// trackpad or mouse scroll wheel
	"hide_tab_scrolling_buttons": false,

	// Hides the new tab button
	"hide_new_tab_button": false,

	// Display the toggle sidebar button in the status bar
	"show_sidebar_button": true,

	// Display the git status in the status bar, requires the show_git_status
	// setting to be enabled
	"show_git_status_in_status_bar": true,

	// Display file encoding in the status bar
	"show_encoding": true,

	// Display line endings in the status bar
	"show_line_endings": true,

	// Display indentation in the status bar
	"show_indentation": true,

	// Display syntax in the status bar
	"show_syntax": true,

	// Show Line, Column in the status bar in full length, compact or completely
	// hidden. Valid values are "enabled", "compact" and "disabled"
	"show_line_column": "enabled",

	// Display misspelled words in the status bar
	"show_spelling_errors": true,

	// Magnifies the entire user interface. Sublime Text must be restarted for
	// this to take effect. 1.0 is normal scale, 0.0 allows for auto-detection
	// based on text scale with older Linux configurations that don't fully
	// support GTK display scaling.
	"ui_scale": 0.0,

	// Enables hardware accelerated rendering. This moves rendering to your GPU,
	// allowing for faster rendering at higher resolutions. Changing this
	// setting requires an application restart to take effect.
	// - "none": Performs CPU rendering.
	// - "opengl": Uses OpenGL for rendering. Minimum required version is 4.1
	//
	// On Mac, this value is overridden in the platform specific settings.
	"hardware_acceleration": "opengl",

	//
	// Application Behavior Settings
	//

	// Exiting the application with hot_exit enabled will cause it to close
	// immediately without prompting. Unsaved modifications and open files will
	// be preserved and restored when next starting.
	//
	// Hot exit has different modes to choose from:
	// - "always": Always perform a hot exit when the application exits. This
	//             includes when the last window is closed on relevant
	//             platforms.
	// - "only_on_quit": Only perform a hot exit when the application is asked
	//                   to exit, not when the last window is closed. This
	//                   setting is only used on Windows and Linux.
	// - "disabled": Disable hot exit.
	"hot_exit": "always",

	// Closing projects with hot_exit_projects enabled will cause it to close
	// immediately without prompting. Unsaved modifications and open files will
	// be preserved in the workspace file and restored when reopened.
	"hot_exit_projects": true,

	// remember_full_screen will allow Sublime Text to start in full screen
	// mode if it was exited in full screen mode. When set to false, Sublime
	// Text will never start in full screen mode.
	"remember_full_screen": false,

	// remember_workspace makes Sublime Text remember what workspace each window
	// was in last. When set to false the OS left to determine which workspace
	// a window is opened in. This doesn't work with Wayland.
	"remember_workspace": true,

	// remember_layout makes Sublime Text start with the same layout it closed
	// with. Only applies when hot_exit is disabled.
	"remember_layout": false,

	// Whether the system's native recent files/folders list should be updated
	// by Sublime Text.
	"update_system_recent_files": true,

	// Mac only. If the user's default shell should be invoked to obtain the
	// user's customized environment variables. May be a boolean, or a string
	// of the path the shell to invoke. Sublime Text must be restarted for this
	// to take effect.
	"shell_environment": true,

	// Whether to reload a file if it has changed on disk.
	"reload_file_on_change": true,

	// Always prompt before reloading a file, even if the file hasn't been
	// modified. If a file has unsaved changes, a prompt will always be shown.
	// Will only show if "reload_file_on_change" is true.
	"always_prompt_for_file_reload": false,

	// When reopening Sublime Text close saved files that have been deleted from
	// the filesystem (Unsaved files will not be closed). If this setting is
	// false no files will be closed, instead they will be restored as empty
	// files.
	//
	// This is useful when working from an unstable networked file system where
	// tabs would be lost if the connection wasn't active.
	"close_deleted_files": false,

	// When files are opened from a file explorer or from the command line, this
	// controls whether a new window is created or not.
	// - "never": Never open a new window unless no window is open.
	// - "always": Always open files in a new window.
	// - "finder_only": (macOS only) Only open files in a new window when
	//                  opening them from finder or dragging onto the dock icon.
	//
	// On Mac, this value is overridden in the platform specific settings.
	"open_files_in_new_window": "never",

	// Mac only: This controls if an empty window is created at startup or not.
	"create_window_at_startup": true,

	// Mac only: Show recent files on the Touch Bar.
	"show_navigation_bar": true,

	// Mac only: Use global find clipboard.
	"use_find_clipboard": true,

	// Set to true to close windows as soon as the last file is closed, unless
	// there's a folder open within the window.
	// On Mac, this value is overridden in the platform specific settings, so
	// you'll need to place this line in your user settings to override it.
	"close_windows_when_empty": false,

	// Show the full path to files in the title bar. On Mac, this value is
	// overridden in the platform specific settings, with a default value of
	// false.
	"show_full_path": true,

	// Show the relative path to files in the title bar. This overrides
	// show_full_path for files that are listed in the sidebar, however
	// show_full_path is still used for other files.
	"show_rel_path": false,

	// Show "project - file" or "file - project" in the title bar.
	"show_project_first": false,

	// Shows the Build Results panel when building. If set to false, the Build
	// Results can be shown via the Tools/Build Results menu.
	"show_panel_on_build": true,

	// Shows build errors just under the line on which they occur.
	"show_errors_inline": true,

	// Shows git repository information next to files in sidebar and in
	// the status bar. Sublime Text has to be restarted for this to take
	// effect.
	"show_git_status": true,

	// Enables showing git status for a git repository in the user's home
	// directory. This is disabled by default since it is typically accidental
	// and can cause heavy CPU usage related to file system watches.
	"allow_git_home_dir": false,

	// This setting determines whether tracked Git files should be diffed
	// against the index or HEAD.
	// Valid values are "index" or "head"
	"git_diff_target": "index",

	// The path to the Sublime Merge executable. This should only be set if
	// Sublime Merge is not installed in a standard location, such as when
	// using a portable install. Set to 'null' to hide Sublime Merge
	// integrations.
	"sublime_merge_path": "",

	// Preview file contents when clicking on a file in the sidebar. Double
	// clicking or editing the preview will open the file and assign it a tab.
	// - true: Always preview on click, including right click
	// - false: Never preview
	// - "only_left": Only preview on left click, right click will change the
	//                selection but not preview the file.
	"preview_on_click": true,

	// Controls the behavior when clicking on a single file in the sidebar
	// that's already open.
	// - true: If the file is already open in any group it will be selected.
	// - false: Only if the file is open in the focused group will it be
	//          selected, otherwise a new view into the file is opened.
	"select_across_groups": true,

	// Controls the maximum number of lines kept in the console's history. Note
	// a large limit will increase memory usage. Use 0 to remove any limit.
	"console_max_history_lines": 10000,

	// folder_exclude_patterns and file_exclude_patterns control which files are
	// listed in folders on the sidebar. These can also be set on a per-
	// project basis.
	"folder_exclude_patterns": [".svn", ".git", ".hg", "CVS", ".Trash", ".Trash-*"],
	"file_exclude_patterns": ["*.pyc", "*.pyo", "*.exe", "*.dll", "*.obj","*.o", "*.a", "*.lib", "*.so", "*.dylib", "*.ncb", "*.sdf", "*.suo", "*.pdb", "*.idb", ".DS_Store", ".directory", "desktop.ini", "*.class", "*.psd", "*.db", "*.sublime-workspace"],
	// These files will still show up in the sidebar, but won't be included in
	// Goto Anything or Find in Files
	"binary_file_patterns": ["*.jpg", "*.jpeg", "*.png", "*.gif", "*.ttf", "*.tga", "*.dds", "*.ico", "*.eot", "*.pdf", "*.swf", "*.jar", "*.zip"],

	// File indexing parses all files in the sidebar, and builds an index of
	// their symbols. This is required for Goto Definition to work.
	"index_files": true,

	// Set the number threads to use for indexing. A value of 0 will make
	// Sublime Text guess based on the number of cores. Use the index_files
	// setting to disable all workers. This requires a restart to take effect.
	"index_workers": 0,

	// Sets whether the indexer should exclude files ignored by git.
	"index_exclude_gitignore": true,

	// Whether unknown file extensions should be checked for indexing or skipped
	// entirely. If a file extension is not being recognised we suggest
	// setting/changing the default syntax for that extension instead of turning
	// this setting off.
	"index_skip_unknown_extensions": true,

	// index_exclude_patterns indicate which files won't be indexed.
	"index_exclude_patterns": ["*.log"],

	// Determines whether Goto Anything should exclude files ignored by git.
	"goto_anything_exclude_gitignore": false,

	// When Vintage, the vi emulation package, is enabled
	// (see ignored_packages, below), this setting controls if files are opened
	// in command mode or insert mode by default
	"vintage_start_in_command_mode": false,

	// Yank commands can place the text in either an internal register, or in
	// the system clipboard.
	"vintage_use_clipboard": false,

	// By default Vintage will interpret all ctrl+<key> key bindings as
	// regular Sublime Text key bindings. Set this to true to make ctrl keys
	// act as they do in vim, instead (e.g., ctrl+f to move forward a page).
	"vintage_ctrl_keys": false,

	// relative_line_numbers will draw each line number as the distance from
	// the current line. Useful in conjunction with Vintage.
	"relative_line_numbers": false,

	// List any packages to ignore here. When removing entries from this list,
	// a restart may be required if the package contains plugins.
	"ignored_packages": ["Vintage",
	],
}