kalaspuffar

How to setup wireguard tunnel

Installation on both machines

echo 'deb http://ftp.debian.org/debian buster-backports main' | sudo tee /etc/apt/sources.list.d/buster-backports.list
sudo apt update
sudo apt install wireguard

ernierasta

#!/bin/bash
# Sway WM screen + audio recorder
# original author: Aaron D. Fields
# blog post: https://blog.spirotot.com/2017/08/21/a-dirty-hack-to-enable-acceptable-sway-wm-screen-recording/
# currently error 503 :-(
#
# Updated version: ernierasta
# Repo: https://gist.github.com/ernierasta
# 
# Changelog:

est31

Trying to deploy WPA3 on my home network

Introduction

Recently, news broke about a new possible offline attack on WPA2 using PMKID. To summarize the attack, WPA2 protected APs can end up broadcasting PMKID values which can then be used to offline-brute-force the password.

These PMKID values are computed this way:

PMKID = HMAC-SHA1-128(PMK, "PMK Name" | MAC_AP | MAC_STA)

cryzed

Disclaimer: Please follow this guide being aware of the fact that I'm not an expert regarding the things outlined below, however I made my best attempt. A few people in IRC confirmed it worked for them and the results looked acceptable.

Attention: After following all the steps run gdk-pixbuf-query-loaders --update-cache as root, this prevents various gdk-related bugs that have been reported in the last few hours. Symptoms are varied, and for Cinnamon the DE fails to start entirely while for XFCE the icon theme seemingly can't be changed anymore etc.

Check the gist's comments for any further tips and instructions, especially if you are running into problems!

Screenshots

Results after following the guide as of 11.01.2017 13:08:

floam

function fish_mode_prompt --description 'Displays the current mode'
                        # Do nothing if not in vi mode
                        if test "$fish_key_bindings" = "fish_vi_key_bindings"
                            switch $fish_bind_mode
                                case default
                                    set_color --bold red
                                    echo 🅽
                                case insert
                                    set_color --bold green
                                    echo 🅸

mattiaslundberg

# Install ARCH Linux with encrypted file-system and UEFI
# The official installation guide (https://wiki.archlinux.org/index.php/Installation_Guide) contains a more verbose description.

# Download the archiso image from https://www.archlinux.org/
# Copy to a usb-drive
dd if=archlinux.img of=/dev/sdX bs=16M && sync # on linux

# Boot from the usb. If the usb fails to boot, make sure that secure boot is disabled in the BIOS configuration.

# Set swedish keymap