Created
March 15, 2020 04:51
-
-
Save patocarr/64a072fa0e1b4028ca87c415e282a816 to your computer and use it in GitHub Desktop.
Fedora 30, 31, 32 boot logs and AMDGPU/DRM driver
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Fedora 31 booting with last Fedora 30 kernel. Fedora 30 with same kernel didn't have acceleration. | |
| AMD GTX 5500 XT Graphics card loads fine, acceleration enabled, using amdgpu driver. | |
| Linux version 5.5.6-100.fc30.x86_64 ([email protected]) (gcc version 9.2.1 20190827 (Red Hat 9.2.1-1) (GCC)) #1 SMP Mon Feb 24 23:06:08 UTC 2020 | |
| Command line: BOOT_IMAGE=(hd5,gpt2)/vmlinuz-5.5.6-100.fc30.x86_64 root=UUID=9361e6c3-623e-42ff-8cd2-41be5b02d8c9 ro resume=UUID=b601758a-19c6-4dc7-ac67-ead9cacc7921 rhgb quiet | |
| x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' | |
| x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' | |
| x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' | |
| x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' | |
| x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' | |
| x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 | |
| x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 | |
| x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 | |
| x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. | |
| BIOS-provided physical RAM map: | |
| BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable | |
| BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved | |
| BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable | |
| BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved | |
| BIOS-e820: [mem 0x0000000000100000-0x000000007f9cdfff] usable | |
| BIOS-e820: [mem 0x000000007f9ce000-0x000000007f9cefff] ACPI NVS | |
| BIOS-e820: [mem 0x000000007f9cf000-0x000000007f9cffff] reserved | |
| BIOS-e820: [mem 0x000000007f9d0000-0x000000008c655fff] usable | |
| BIOS-e820: [mem 0x000000008c656000-0x000000008df11fff] reserved | |
| BIOS-e820: [mem 0x000000008df12000-0x000000008df6bfff] ACPI data | |
| BIOS-e820: [mem 0x000000008df6c000-0x000000008e35dfff] ACPI NVS | |
| BIOS-e820: [mem 0x000000008e35e000-0x000000008f7a1fff] reserved | |
| BIOS-e820: [mem 0x000000008f7a2000-0x000000008f7fffff] usable | |
| BIOS-e820: [mem 0x000000008f800000-0x000000008fffffff] reserved | |
| BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved | |
| BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved | |
| BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved | |
| BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved | |
| BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved | |
| BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved | |
| BIOS-e820: [mem 0x0000000100000000-0x000000106effffff] usable | |
| NX (Execute Disable) protection: active | |
| e820: update [mem 0x7d1f7018-0x7d20fa57] usable ==> usable | |
| e820: update [mem 0x7d1f7018-0x7d20fa57] usable ==> usable | |
| e820: update [mem 0x7d1e6018-0x7d1f6e57] usable ==> usable | |
| e820: update [mem 0x7d1e6018-0x7d1f6e57] usable ==> usable | |
| extended physical RAM map: | |
| reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable | |
| reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved | |
| reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable | |
| reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved | |
| reserve setup_data: [mem 0x0000000000100000-0x000000007d1e6017] usable | |
| reserve setup_data: [mem 0x000000007d1e6018-0x000000007d1f6e57] usable | |
| reserve setup_data: [mem 0x000000007d1f6e58-0x000000007d1f7017] usable | |
| reserve setup_data: [mem 0x000000007d1f7018-0x000000007d20fa57] usable | |
| reserve setup_data: [mem 0x000000007d20fa58-0x000000007f9cdfff] usable | |
| reserve setup_data: [mem 0x000000007f9ce000-0x000000007f9cefff] ACPI NVS | |
| reserve setup_data: [mem 0x000000007f9cf000-0x000000007f9cffff] reserved | |
| reserve setup_data: [mem 0x000000007f9d0000-0x000000008c655fff] usable | |
| reserve setup_data: [mem 0x000000008c656000-0x000000008df11fff] reserved | |
| reserve setup_data: [mem 0x000000008df12000-0x000000008df6bfff] ACPI data | |
| reserve setup_data: [mem 0x000000008df6c000-0x000000008e35dfff] ACPI NVS | |
| reserve setup_data: [mem 0x000000008e35e000-0x000000008f7a1fff] reserved | |
| reserve setup_data: [mem 0x000000008f7a2000-0x000000008f7fffff] usable | |
| reserve setup_data: [mem 0x000000008f800000-0x000000008fffffff] reserved | |
| reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved | |
| reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved | |
| reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved | |
| reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved | |
| reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved | |
| reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved | |
| reserve setup_data: [mem 0x0000000100000000-0x000000106effffff] usable | |
| efi: EFI v2.60 by American Megatrends | |
| efi: ACPI 2.0=0x8df35000 ACPI=0x8df35000 SMBIOS=0x8f635000 SMBIOS 3.0=0x8f634000 MPS=0xfcb20 ESRT=0x87d5bf18 MEMATTR=0x87b7f018 | |
| secureboot: Secure boot disabled | |
| SMBIOS 3.0.0 present. | |
| DMI: System manufacturer System Product Name/TUF Z370-PRO GAMING, BIOS 0215 09/05/2017 | |
| tsc: Detected 3700.000 MHz processor | |
| tsc: Detected 3699.850 MHz TSC | |
| e820: update [mem 0x00000000-0x00000fff] usable ==> reserved | |
| e820: remove [mem 0x000a0000-0x000fffff] usable | |
| last_pfn = 0x106f000 max_arch_pfn = 0x400000000 | |
| MTRR default type: write-back | |
| MTRR fixed ranges enabled: | |
| 00000-9FFFF write-back | |
| A0000-BFFFF uncachable | |
| C0000-FFFFF write-protect | |
| MTRR variable ranges enabled: | |
| 0 base 00C0000000 mask 7FC0000000 uncachable | |
| 1 base 00A0000000 mask 7FE0000000 uncachable | |
| 2 base 0090000000 mask 7FF0000000 uncachable | |
| 3 disabled | |
| 4 disabled | |
| 5 disabled | |
| 6 disabled | |
| 7 disabled | |
| 8 disabled | |
| 9 disabled | |
| x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT | |
| last_pfn = 0x8f800 max_arch_pfn = 0x400000000 | |
| found SMP MP-table at [mem 0x000fce00-0x000fce0f] | |
| esrt: Reserving ESRT space from 0x0000000087d5bf18 to 0x0000000087d5bf50. | |
| e820: update [mem 0x87d5b000-0x87d5bfff] usable ==> reserved | |
| Using GB pages for direct mapping | |
| BRK [0xa7f601000, 0xa7f601fff] PGTABLE | |
| BRK [0xa7f602000, 0xa7f602fff] PGTABLE | |
| BRK [0xa7f603000, 0xa7f603fff] PGTABLE | |
| BRK [0xa7f604000, 0xa7f604fff] PGTABLE | |
| BRK [0xa7f605000, 0xa7f605fff] PGTABLE | |
| BRK [0xa7f606000, 0xa7f606fff] PGTABLE | |
| BRK [0xa7f607000, 0xa7f607fff] PGTABLE | |
| BRK [0xa7f608000, 0xa7f608fff] PGTABLE | |
| BRK [0xa7f609000, 0xa7f609fff] PGTABLE | |
| BRK [0xa7f60a000, 0xa7f60afff] PGTABLE | |
| secureboot: Secure boot disabled | |
| RAMDISK: [mem 0x7d210000-0x7f09afff] | |
| ACPI: Early table checksum verification disabled | |
| ACPI: RSDP 0x000000008DF35000 000024 (v02 ALASKA) | |
| ACPI: XSDT 0x000000008DF350A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: FACP 0x000000008DF5F348 000114 (v06 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: DSDT 0x000000008DF35210 02A132 (v02 ALASKA A M I 01072009 INTL 20160422) | |
| ACPI: FACS 0x000000008E35DF00 000040 | |
| ACPI: APIC 0x000000008DF5F460 0000F4 (v03 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: FPDT 0x000000008DF5F558 000044 (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: FIDT 0x000000008DF5F5A0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: WSMT 0x000000008DF6AFA0 000028 (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: MCFG 0x000000008DF5F698 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) | |
| ACPI: SSDT 0x000000008DF5F6D8 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF5FA80 003156 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF62BD8 002611 (v02 PegSsd PegSsdt 00001000 INTL 20160422) | |
| ACPI: HPET 0x000000008DF651F0 000038 (v01 INTEL KBL 00000001 MSFT 0000005F) | |
| ACPI: SSDT 0x000000008DF65228 000B13 (v02 INTEL xh_rvp08 00000000 INTL 20160422) | |
| ACPI: UEFI 0x000000008DF65D40 000042 (v01 ALASKA A M I 00000002 01000013) | |
| ACPI: SSDT 0x000000008DF65D88 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) | |
| ACPI: LPIT 0x000000008DF67538 000094 (v01 INTEL KBL 00000000 MSFT 0000005F) | |
| ACPI: SSDT 0x000000008DF675D0 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF67718 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF679B8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF6A9C0 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422) | |
| ACPI: DBGP 0x000000008DF6AED8 000034 (v01 INTEL 00000002 MSFT 0000005F) | |
| ACPI: DBG2 0x000000008DF6AF10 000054 (v00 INTEL 00000002 MSFT 0000005F) | |
| ACPI: BGRT 0x000000008DF6AF68 000038 (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: Local APIC address 0xfee00000 | |
| No NUMA configuration found | |
| Faking a node at [mem 0x0000000000000000-0x000000106effffff] | |
| NODE_DATA(0) allocated [mem 0x106efd5000-0x106effffff] | |
| Zone ranges: | |
| DMA [mem 0x0000000000001000-0x0000000000ffffff] | |
| DMA32 [mem 0x0000000001000000-0x00000000ffffffff] | |
| Normal [mem 0x0000000100000000-0x000000106effffff] | |
| Device empty | |
| Movable zone start for each node | |
| Early memory node ranges | |
| node 0: [mem 0x0000000000001000-0x0000000000057fff] | |
| node 0: [mem 0x0000000000059000-0x000000000009efff] | |
| node 0: [mem 0x0000000000100000-0x000000007f9cdfff] | |
| node 0: [mem 0x000000007f9d0000-0x000000008c655fff] | |
| node 0: [mem 0x000000008f7a2000-0x000000008f7fffff] | |
| node 0: [mem 0x0000000100000000-0x000000106effffff] | |
| Zeroed struct page in unavailable ranges: 18865 pages | |
| Initmem setup node 0 [mem 0x0000000000001000-0x000000106effffff] | |
| On node 0 totalpages: 16758351 | |
| DMA zone: 64 pages used for memmap | |
| DMA zone: 26 pages reserved | |
| DMA zone: 3997 pages, LIFO batch:0 | |
| DMA32 zone: 8923 pages used for memmap | |
| DMA32 zone: 571058 pages, LIFO batch:63 | |
| Normal zone: 252864 pages used for memmap | |
| Normal zone: 16183296 pages, LIFO batch:63 | |
| ACPI: PM-Timer IO Port: 0x1808 | |
| ACPI: Local APIC address 0xfee00000 | |
| ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) | |
| IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) | |
| ACPI: IRQ0 used by override. | |
| ACPI: IRQ9 used by override. | |
| Using ACPI (MADT) for SMP configuration information | |
| ACPI: HPET id: 0x8086a201 base: 0xfed00000 | |
| e820: update [mem 0x88d8b000-0x88f3bfff] usable ==> reserved | |
| smpboot: Allowing 12 CPUs, 0 hotplug CPUs | |
| PM: Registered nosave memory: [mem 0x00000000-0x00000fff] | |
| PM: Registered nosave memory: [mem 0x00058000-0x00058fff] | |
| PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] | |
| PM: Registered nosave memory: [mem 0x7d1e6000-0x7d1e6fff] | |
| PM: Registered nosave memory: [mem 0x7d1f6000-0x7d1f6fff] | |
| PM: Registered nosave memory: [mem 0x7d1f7000-0x7d1f7fff] | |
| PM: Registered nosave memory: [mem 0x7d20f000-0x7d20ffff] | |
| PM: Registered nosave memory: [mem 0x7f9ce000-0x7f9cefff] | |
| PM: Registered nosave memory: [mem 0x7f9cf000-0x7f9cffff] | |
| PM: Registered nosave memory: [mem 0x87d5b000-0x87d5bfff] | |
| PM: Registered nosave memory: [mem 0x88d8b000-0x88f3bfff] | |
| PM: Registered nosave memory: [mem 0x8c656000-0x8df11fff] | |
| PM: Registered nosave memory: [mem 0x8df12000-0x8df6bfff] | |
| PM: Registered nosave memory: [mem 0x8df6c000-0x8e35dfff] | |
| PM: Registered nosave memory: [mem 0x8e35e000-0x8f7a1fff] | |
| PM: Registered nosave memory: [mem 0x8f800000-0x8fffffff] | |
| PM: Registered nosave memory: [mem 0x90000000-0xdfffffff] | |
| PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] | |
| PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] | |
| PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] | |
| PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] | |
| PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] | |
| PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] | |
| PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] | |
| PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff] | |
| PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] | |
| PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] | |
| PM: Registered nosave memory: [mem 0xff000000-0xffffffff] | |
| [mem 0x90000000-0xdfffffff] available for PCI devices | |
| Booting paravirtualized kernel on bare hardware | |
| clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns | |
| setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1 | |
| percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 | |
| pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152 | |
| pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- | |
| Built 1 zonelists, mobility grouping on. Total pages: 16496474 | |
| Policy zone: Normal | |
| Kernel command line: BOOT_IMAGE=(hd5,gpt2)/vmlinuz-5.5.6-100.fc30.x86_64 root=UUID=9361e6c3-623e-42ff-8cd2-41be5b02d8c9 ro resume=UUID=b601758a-19c6-4dc7-ac67-ead9cacc7921 rhgb quiet | |
| Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) | |
| Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) | |
| mem auto-init: stack:off, heap alloc:off, heap free:off | |
| Memory: 65669540K/67033404K available (14339K kernel code, 2297K rwdata, 4976K rodata, 2560K init, 5236K bss, 1363864K reserved, 0K cma-reserved) | |
| SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 | |
| Kernel/User page tables isolation: enabled | |
| ftrace: allocating 41451 entries in 162 pages | |
| ftrace: allocated 162 pages with 3 groups | |
| rcu: Hierarchical RCU implementation. | |
| rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12. | |
| Tasks RCU enabled. | |
| rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. | |
| rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 | |
| NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16 | |
| random: crng done (trusting CPU's manufacturer) | |
| Console: colour dummy device 80x25 | |
| printk: console [tty0] enabled | |
| ACPI: Core revision 20191018 | |
| clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns | |
| APIC: Switch to symmetric I/O mode setup | |
| x2apic: IRQ remapping doesn't support X2APIC mode | |
| Switched APIC routing to physical flat. | |
| ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 | |
| clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns | |
| Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=3699850) | |
| pid_max: default: 32768 minimum: 301 | |
| LSM: Security Framework initializing | |
| Yama: becoming mindful. | |
| SELinux: Initializing. | |
| *** VALIDATE SELinux *** | |
| Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| *** VALIDATE tmpfs *** | |
| *** VALIDATE proc *** | |
| *** VALIDATE cgroup1 *** | |
| *** VALIDATE cgroup2 *** | |
| mce: CPU0: Thermal monitoring enabled (TM1) | |
| process: using mwait in idle threads | |
| Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 | |
| Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 | |
| Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization | |
| Spectre V2 : Mitigation: Full generic retpoline | |
| Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch | |
| Speculative Store Bypass: Vulnerable | |
| TAA: Vulnerable: Clear CPU buffers attempted, no microcode | |
| MDS: Vulnerable: Clear CPU buffers attempted, no microcode | |
| Freeing SMP alternatives memory: 36K | |
| TSC deadline timer enabled | |
| smpboot: CPU0: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xa) | |
| Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. | |
| ... version: 4 | |
| ... bit width: 48 | |
| ... generic registers: 4 | |
| ... value mask: 0000ffffffffffff | |
| ... max period: 00007fffffffffff | |
| ... fixed-purpose events: 3 | |
| ... event mask: 000000070000000f | |
| rcu: Hierarchical SRCU implementation. | |
| NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. | |
| smp: Bringing up secondary CPUs ... | |
| x86: Booting SMP configuration: | |
| .... node #0, CPUs: #1 #2 #3 #4 #5 #6 | |
| MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. | |
| TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. | |
| #7 #8 #9 #10 #11 | |
| smp: Brought up 1 node, 12 CPUs | |
| smpboot: Max logical packages: 1 | |
| smpboot: Total of 12 processors activated (88796.40 BogoMIPS) | |
| devtmpfs: initialized | |
| x86/mm: Memory block size: 128MB | |
| PM: Registering ACPI NVS region [mem 0x7f9ce000-0x7f9cefff] (4096 bytes) | |
| PM: Registering ACPI NVS region [mem 0x8df6c000-0x8e35dfff] (4136960 bytes) | |
| clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns | |
| futex hash table entries: 4096 (order: 6, 262144 bytes, linear) | |
| pinctrl core: initialized pinctrl subsystem | |
| PM: RTC time: 02:48:34, date: 2020-03-15 | |
| thermal_sys: Registered thermal governor 'fair_share' | |
| thermal_sys: Registered thermal governor 'bang_bang' | |
| thermal_sys: Registered thermal governor 'step_wise' | |
| thermal_sys: Registered thermal governor 'user_space' | |
| NET: Registered protocol family 16 | |
| audit: initializing netlink subsys (disabled) | |
| audit: type=2000 audit(1584240514.028:1): state=initialized audit_enabled=0 res=1 | |
| cpuidle: using governor menu | |
| KVM setup pv remote TLB flush | |
| ACPI FADT declares the system doesn't support PCIe ASPM, so disable it | |
| ACPI: bus type PCI registered | |
| acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 | |
| PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) | |
| PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 | |
| PCI: Using configuration type 1 for base access | |
| ENERGY_PERF_BIAS: Set to 'normal', was 'performance' | |
| HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages | |
| HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages | |
| cryptd: max_cpu_qlen set to 1000 | |
| alg: No test for 842 (842-generic) | |
| alg: No test for 842 (842-scomp) | |
| ACPI: Added _OSI(Module Device) | |
| ACPI: Added _OSI(Processor Device) | |
| ACPI: Added _OSI(3.0 _SCP Extensions) | |
| ACPI: Added _OSI(Processor Aggregator Device) | |
| ACPI: Added _OSI(Linux-Dell-Video) | |
| ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) | |
| ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) | |
| ACPI: 10 ACPI AML tables successfully acquired and loaded | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9BA327FD2000 00077A (v02 PmRef Cpu0Ist 00003000 INTL 20160422) | |
| ACPI: \_PR_.PR00: _OSC native thermal LVT Acked | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9BA32732B400 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9BA32781A9C0 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9BA32783C000 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9BA3271A5000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9BA32767C000 000317 (v02 PmRef ApHwp 00003000 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9BA32767E800 00030A (v02 PmRef ApCst 00003000 INTL 20160422) | |
| ACPI: Interpreter enabled | |
| ACPI: (supports S0 S3 S4 S5) | |
| ACPI: Using IOAPIC for interrupt routing | |
| PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug | |
| ACPI: Enabled 9 GPEs in block 00 to 7F | |
| ACPI: Power Resource [PG00] (on) | |
| ACPI: Power Resource [PG01] (on) | |
| ACPI: Power Resource [PG02] (on) | |
| ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) | |
| acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] | |
| acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] | |
| acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] | |
| acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration | |
| PCI host bridge to bus 0000:00 | |
| pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] | |
| pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] | |
| pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] | |
| pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] | |
| pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] | |
| pci_bus 0000:00: root bus resource [bus 00-fe] | |
| pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000 | |
| pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 | |
| pci 0000:00:01.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330 | |
| pci 0000:00:14.0: reg 0x10: [mem 0xdff30000-0xdff3ffff 64bit] | |
| pci 0000:00:14.0: PME# supported from D3hot D3cold | |
| pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000 | |
| pci 0000:00:16.0: reg 0x10: [mem 0xdff4d000-0xdff4dfff 64bit] | |
| pci 0000:00:16.0: PME# supported from D3hot | |
| pci 0000:00:17.0: [8086:a282] type 00 class 0x010601 | |
| pci 0000:00:17.0: reg 0x10: [mem 0xdff48000-0xdff49fff] | |
| pci 0000:00:17.0: reg 0x14: [mem 0xdff4c000-0xdff4c0ff] | |
| pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057] | |
| pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043] | |
| pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f] | |
| pci 0000:00:17.0: reg 0x24: [mem 0xdff4b000-0xdff4b7ff] | |
| pci 0000:00:17.0: PME# supported from D3hot | |
| pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400 | |
| pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400 | |
| pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400 | |
| pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400 | |
| pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400 | |
| pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1f.0: [8086:a2c9] type 00 class 0x060100 | |
| pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000 | |
| pci 0000:00:1f.2: reg 0x10: [mem 0xdff44000-0xdff47fff] | |
| pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300 | |
| pci 0000:00:1f.3: reg 0x10: [mem 0xdff40000-0xdff43fff 64bit] | |
| pci 0000:00:1f.3: reg 0x20: [mem 0xdff20000-0xdff2ffff 64bit] | |
| pci 0000:00:1f.3: PME# supported from D3hot D3cold | |
| pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500 | |
| pci 0000:00:1f.4: reg 0x10: [mem 0xdff4a000-0xdff4a0ff 64bit] | |
| pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f] | |
| pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000 | |
| pci 0000:00:1f.6: reg 0x10: [mem 0xdff00000-0xdff1ffff] | |
| pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold | |
| pci 0000:01:00.0: [1002:1478] type 01 class 0x060400 | |
| pci 0000:01:00.0: reg 0x10: [mem 0xdfc00000-0xdfc03fff] | |
| pci 0000:01:00.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 126.024 Gb/s with 16 GT/s x8 link) | |
| pci 0000:00:01.0: PCI bridge to [bus 01-03] | |
| pci 0000:00:01.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfcfffff] | |
| pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:02:00.0: [1002:1479] type 01 class 0x060400 | |
| pci 0000:02:00.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:01:00.0: PCI bridge to [bus 02-03] | |
| pci 0000:01:00.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:01:00.0: bridge window [mem 0xdfb00000-0xdfbfffff] | |
| pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:03:00.0: [1002:7340] type 00 class 0x030000 | |
| pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] | |
| pci 0000:03:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] | |
| pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe0ff] | |
| pci 0000:03:00.0: reg 0x24: [mem 0xdfb00000-0xdfb7ffff] | |
| pci 0000:03:00.0: reg 0x30: [mem 0xdfb80000-0xdfb9ffff pref] | |
| pci 0000:03:00.0: BAR 0: assigned to efifb | |
| pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold | |
| pci 0000:03:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16 GT/s x16 link) | |
| pci 0000:03:00.1: [1002:ab38] type 00 class 0x040300 | |
| pci 0000:03:00.1: reg 0x10: [mem 0xdfba0000-0xdfba3fff] | |
| pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold | |
| pci 0000:02:00.0: PCI bridge to [bus 03] | |
| pci 0000:02:00.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:02:00.0: bridge window [mem 0xdfb00000-0xdfbfffff] | |
| pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:00:1b.0: PCI bridge to [bus 04] | |
| pci 0000:05:00.0: [144d:a804] type 00 class 0x010802 | |
| pci 0000:05:00.0: reg 0x10: [mem 0xdfe00000-0xdfe03fff 64bit] | |
| pci 0000:00:1b.4: PCI bridge to [bus 05] | |
| pci 0000:00:1b.4: bridge window [mem 0xdfe00000-0xdfefffff] | |
| pci 0000:00:1c.0: PCI bridge to [bus 06] | |
| pci 0000:07:00.0: [1b21:2142] type 00 class 0x0c0330 | |
| pci 0000:07:00.0: reg 0x10: [mem 0xdfd00000-0xdfd07fff 64bit] | |
| pci 0000:07:00.0: enabling Extended Tags | |
| pci 0000:07:00.0: PME# supported from D0 | |
| pci 0000:00:1c.4: PCI bridge to [bus 07] | |
| pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff] | |
| pci 0000:00:1d.0: PCI bridge to [bus 08] | |
| ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| iommu: Default domain type: Translated | |
| pci 0000:03:00.0: vgaarb: setting as boot VGA device | |
| pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none | |
| pci 0000:03:00.0: vgaarb: bridge control possible | |
| vgaarb: loaded | |
| SCSI subsystem initialized | |
| libata version 3.00 loaded. | |
| ACPI: bus type USB registered | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| pps_core: LinuxPPS API ver. 1 registered | |
| pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| PTP clock support registered | |
| EDAC MC: Ver: 3.0.0 | |
| Registered efivars operations | |
| PCI: Using ACPI for IRQ routing | |
| PCI: pci_cache_line_size set to 64 bytes | |
| e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] | |
| e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] | |
| e820: reserve RAM buffer [mem 0x7d1e6018-0x7fffffff] | |
| e820: reserve RAM buffer [mem 0x7d1f7018-0x7fffffff] | |
| e820: reserve RAM buffer [mem 0x7f9ce000-0x7fffffff] | |
| e820: reserve RAM buffer [mem 0x87d5b000-0x87ffffff] | |
| e820: reserve RAM buffer [mem 0x88d8b000-0x8bffffff] | |
| e820: reserve RAM buffer [mem 0x8c656000-0x8fffffff] | |
| e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff] | |
| e820: reserve RAM buffer [mem 0x106f000000-0x106fffffff] | |
| NetLabel: Initializing | |
| NetLabel: domain hash size = 128 | |
| NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
| NetLabel: unlabeled traffic allowed by default | |
| hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 | |
| hpet0: 8 comparators, 64-bit 24.000000 MHz counter | |
| clocksource: Switched to clocksource tsc-early | |
| *** VALIDATE bpf *** | |
| VFS: Disk quotas dquot_6.6.0 | |
| VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| *** VALIDATE ramfs *** | |
| *** VALIDATE hugetlbfs *** | |
| pnp: PnP ACPI init | |
| system 00:00: [io 0x0290-0x029f] has been reserved | |
| system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp 00:01: [dma 0 disabled] | |
| pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) | |
| system 00:02: [io 0x0680-0x069f] has been reserved | |
| system 00:02: [io 0xffff] has been reserved | |
| system 00:02: [io 0xffff] has been reserved | |
| system 00:02: [io 0xffff] has been reserved | |
| system 00:02: [io 0x1800-0x18fe] has been reserved | |
| system 00:02: [io 0x164e-0x164f] has been reserved | |
| system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| system 00:03: [io 0x0800-0x087f] has been reserved | |
| system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) | |
| system 00:05: [io 0x1854-0x1857] has been reserved | |
| system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) | |
| system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved | |
| system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved | |
| system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved | |
| system 00:06: [mem 0xe0000000-0xefffffff] has been reserved | |
| system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved | |
| system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved | |
| system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved | |
| system 00:06: [mem 0xff000000-0xffffffff] has been reserved | |
| system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved | |
| system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved | |
| system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved | |
| system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved | |
| system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved | |
| system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved | |
| system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved | |
| system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved | |
| system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved | |
| system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved | |
| system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved | |
| system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved | |
| system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| system 00:08: [io 0xff00-0xfffe] has been reserved | |
| system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved | |
| system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved | |
| system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved | |
| system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp: PnP ACPI: found 10 devices | |
| clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns | |
| pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 | |
| pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 | |
| pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 | |
| pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000 | |
| pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000 | |
| pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000 | |
| pci 0000:00:1b.0: BAR 14: assigned [mem 0x90000000-0x901fffff] | |
| pci 0000:00:1b.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref] | |
| pci 0000:00:1d.0: BAR 14: assigned [mem 0x90400000-0x905fffff] | |
| pci 0000:00:1d.0: BAR 15: assigned [mem 0x90600000-0x907fffff 64bit pref] | |
| pci 0000:00:1b.0: BAR 13: assigned [io 0x2000-0x2fff] | |
| pci 0000:00:1d.0: BAR 13: assigned [io 0x3000-0x3fff] | |
| pci 0000:02:00.0: PCI bridge to [bus 03] | |
| pci 0000:02:00.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:02:00.0: bridge window [mem 0xdfb00000-0xdfbfffff] | |
| pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:01:00.0: PCI bridge to [bus 02-03] | |
| pci 0000:01:00.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:01:00.0: bridge window [mem 0xdfb00000-0xdfbfffff] | |
| pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:00:01.0: PCI bridge to [bus 01-03] | |
| pci 0000:00:01.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfcfffff] | |
| pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:00:1b.0: PCI bridge to [bus 04] | |
| pci 0000:00:1b.0: bridge window [io 0x2000-0x2fff] | |
| pci 0000:00:1b.0: bridge window [mem 0x90000000-0x901fffff] | |
| pci 0000:00:1b.0: bridge window [mem 0x90200000-0x903fffff 64bit pref] | |
| pci 0000:00:1b.4: PCI bridge to [bus 05] | |
| pci 0000:00:1b.4: bridge window [mem 0xdfe00000-0xdfefffff] | |
| pci 0000:00:1c.0: PCI bridge to [bus 06] | |
| pci 0000:00:1c.4: PCI bridge to [bus 07] | |
| pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff] | |
| pci 0000:00:1d.0: PCI bridge to [bus 08] | |
| pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] | |
| pci 0000:00:1d.0: bridge window [mem 0x90400000-0x905fffff] | |
| pci 0000:00:1d.0: bridge window [mem 0x90600000-0x907fffff 64bit pref] | |
| pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] | |
| pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] | |
| pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] | |
| pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window] | |
| pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] | |
| pci_bus 0000:01: resource 0 [io 0xe000-0xefff] | |
| pci_bus 0000:01: resource 1 [mem 0xdfb00000-0xdfcfffff] | |
| pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci_bus 0000:02: resource 0 [io 0xe000-0xefff] | |
| pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfbfffff] | |
| pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci_bus 0000:03: resource 0 [io 0xe000-0xefff] | |
| pci_bus 0000:03: resource 1 [mem 0xdfb00000-0xdfbfffff] | |
| pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] | |
| pci_bus 0000:04: resource 1 [mem 0x90000000-0x901fffff] | |
| pci_bus 0000:04: resource 2 [mem 0x90200000-0x903fffff 64bit pref] | |
| pci_bus 0000:05: resource 1 [mem 0xdfe00000-0xdfefffff] | |
| pci_bus 0000:07: resource 1 [mem 0xdfd00000-0xdfdfffff] | |
| pci_bus 0000:08: resource 0 [io 0x3000-0x3fff] | |
| pci_bus 0000:08: resource 1 [mem 0x90400000-0x905fffff] | |
| pci_bus 0000:08: resource 2 [mem 0x90600000-0x907fffff 64bit pref] | |
| NET: Registered protocol family 2 | |
| tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear) | |
| TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) | |
| TCP: Hash tables configured (established 524288 bind 65536) | |
| UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
| UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
| NET: Registered protocol family 1 | |
| NET: Registered protocol family 44 | |
| pci 0000:03:00.0: disabling ATS | |
| pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] | |
| pci 0000:03:00.1: D0 power state depends on 0000:03:00.0 | |
| PCI: CLS 64 bytes, default 64 | |
| Trying to unpack rootfs image as initramfs... | |
| Freeing initrd memory: 31276K | |
| PCI-DMA: Using software bounce buffering for IO (SWIOTLB) | |
| software IO TLB: mapped [mem 0x83b7f000-0x87b7f000] (64MB) | |
| Initialise system trusted keyrings | |
| Key type blacklist registered | |
| workingset: timestamp_bits=36 max_order=24 bucket_order=0 | |
| zbud: loaded | |
| Platform Keyring initialized | |
| NET: Registered protocol family 38 | |
| Key type asymmetric registered | |
| Asymmetric key parser 'x509' registered | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) | |
| io scheduler mq-deadline registered | |
| io scheduler kyber registered | |
| io scheduler bfq registered | |
| atomic64_test: passed for x86-64 platform with CX8 and with SSE | |
| pcieport 0000:00:1b.4: AER: enabled with IRQ 122 | |
| pcieport 0000:00:1c.4: AER: enabled with IRQ 124 | |
| shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 | |
| efifb: probing for efifb | |
| efifb: Ignoring BGRT: unexpected or invalid BMP data | |
| efifb: framebuffer at 0xc0000000, using 3072k, total 3072k | |
| efifb: mode is 1024x768x32, linelength=4096, pages=1 | |
| efifb: scrolling: redraw | |
| efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 | |
| fbcon: Deferring console take-over | |
| fb0: EFI VGA frame buffer device | |
| intel_idle: MWAIT substates: 0x11142120 | |
| intel_idle: v0.4.1 model 0x9E | |
| intel_idle: lapic_timer_reliable_states 0xffffffff | |
| input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 | |
| ACPI: Sleep Button [SLPB] | |
| input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 | |
| ACPI: Power Button [PWRB] | |
| input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 | |
| ACPI: Power Button [PWRF] | |
| Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled | |
| 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A | |
| Non-volatile memory driver v1.3 | |
| Linux agpgart interface v0.103 | |
| ahci 0000:00:17.0: version 3.0 | |
| ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode | |
| ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst | |
| scsi host0: ahci | |
| scsi host1: ahci | |
| scsi host2: ahci | |
| scsi host3: ahci | |
| scsi host4: ahci | |
| scsi host5: ahci | |
| ata1: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b100 irq 128 | |
| ata2: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b180 irq 128 | |
| ata3: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b200 irq 128 | |
| ata4: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b280 irq 128 | |
| ata5: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b300 irq 128 | |
| ata6: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b380 irq 128 | |
| libphy: Fixed MDIO Bus: probed | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ehci-pci: EHCI PCI platform driver | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| ohci-pci: OHCI PCI platform driver | |
| uhci_hcd: USB Universal Host Controller Interface driver | |
| xhci_hcd 0000:00:14.0: xHCI Host Controller | |
| xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 | |
| xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 | |
| xhci_hcd 0000:00:14.0: cache line size of 64 is not supported | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: xHCI Host Controller | |
| usb usb1: Manufacturer: Linux 5.5.6-100.fc30.x86_64 xhci-hcd | |
| usb usb1: SerialNumber: 0000:00:14.0 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 16 ports detected | |
| xhci_hcd 0000:00:14.0: xHCI Host Controller | |
| xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 | |
| xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: xHCI Host Controller | |
| usb usb2: Manufacturer: Linux 5.5.6-100.fc30.x86_64 xhci-hcd | |
| usb usb2: SerialNumber: 0000:00:14.0 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 10 ports detected | |
| xhci_hcd 0000:07:00.0: xHCI Host Controller | |
| xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3 | |
| pcieport 0000:00:1c.4: AER: Corrected error received: 0000:00:1c.4 | |
| pcieport 0000:00:1c.4: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) | |
| pcieport 0000:00:1c.4: AER: device [8086:a294] error status/mask=00000001/00002000 | |
| pcieport 0000:00:1c.4: AER: [ 0] RxErr | |
| xhci_hcd 0000:07:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010 | |
| usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 | |
| usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb3: Product: xHCI Host Controller | |
| usb usb3: Manufacturer: Linux 5.5.6-100.fc30.x86_64 xhci-hcd | |
| usb usb3: SerialNumber: 0000:07:00.0 | |
| hub 3-0:1.0: USB hub found | |
| hub 3-0:1.0: 2 ports detected | |
| xhci_hcd 0000:07:00.0: xHCI Host Controller | |
| xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4 | |
| xhci_hcd 0000:07:00.0: Host supports USB 3.1 Enhanced SuperSpeed | |
| usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. | |
| usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05 | |
| usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb4: Product: xHCI Host Controller | |
| usb usb4: Manufacturer: Linux 5.5.6-100.fc30.x86_64 xhci-hcd | |
| usb usb4: SerialNumber: 0000:07:00.0 | |
| hub 4-0:1.0: USB hub found | |
| hub 4-0:1.0: 2 ports detected | |
| usbcore: registered new interface driver usbserial_generic | |
| usbserial: USB Serial support registered for generic | |
| i8042: PNP: No PS/2 controller found. | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc_cmos 00:04: RTC can wake from S4 | |
| rtc_cmos 00:04: registered as rtc0 | |
| rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs | |
| device-mapper: uevent: version 1.0.3 | |
| device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected] | |
| intel_pstate: Intel P-state driver initializing | |
| intel_pstate: Disabling energy efficiency optimization | |
| intel_pstate: HWP enabled | |
| hid: raw HID events driver (C) Jiri Kosina | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:07 [mem 0xfdb00000-0xfdffffff] | |
| caller pmc_core_probe+0x7d/0x2d2 mapping multiple BARs | |
| intel_pmc_core INT33A1:00: initialized | |
| drop_monitor: Initializing network drop monitor service | |
| Initializing XFRM netlink socket | |
| NET: Registered protocol family 10 | |
| Segment Routing with IPv6 | |
| mip6: Mobile IPv6 | |
| NET: Registered protocol family 17 | |
| RAS: Correctable Errors collector initialized. | |
| microcode: sig=0x906ea, pf=0x2, revision=0x6e | |
| microcode: Microcode Update Driver: v2.2. | |
| IPI shorthand broadcast: enabled | |
| AVX2 version of gcm_enc/dec engaged. | |
| AES CTR mode by8 optimization enabled | |
| sched_clock: Marking stable (1082456823, 3328849)->(1089535914, -3750242) | |
| registered taskstats version 1 | |
| Loading compiled-in X.509 certificates | |
| Loaded X.509 cert 'Fedora kernel signing key: ebae795e6b9f89f5e7fb3ef59422167c37f8f2f5' | |
| zswap: loaded using pool lzo/zbud | |
| Key type ._fscrypt registered | |
| Key type .fscrypt registered | |
| Key type big_key registered | |
| Key type encrypted registered | |
| integrity: Loading X.509 certificate: UEFI:db | |
| integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' | |
| integrity: Loading X.509 certificate: UEFI:db | |
| integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' | |
| integrity: Loading X.509 certificate: UEFI:db | |
| integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' | |
| integrity: Loading X.509 certificate: UEFI:db | |
| integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' | |
| integrity: Loading X.509 certificate: UEFI:db | |
| integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' | |
| ima: No TPM chip found, activating TPM-bypass! | |
| ima: Allocated hash algorithm: sha256 | |
| ima: No architecture policies found | |
| PM: Magic number: 12:105:814 | |
| PM: hash matches drivers/base/power/main.c:713 | |
| rtc_cmos 00:04: setting system clock to 2020-03-15T02:48:35 UTC (1584240515) | |
| ata5: SATA link down (SStatus 4 SControl 300) | |
| ata6: SATA link down (SStatus 4 SControl 300) | |
| ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
| ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) | |
| ata3: SATA link down (SStatus 4 SControl 300) | |
| ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) | |
| ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata2.00: supports DRM functions and may not be fully accessible | |
| ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata2.00: ATA-11: Samsung SSD 860 QVO 2TB, RVQ01B6Q, max UDMA/133 | |
| ata2.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA | |
| ata4.00: ATAPI: HP DVD Writer 1260t, BH21, max UDMA/100 | |
| ata1.00: ATA-8: Hitachi HDS721064CLA332, JPGOA3GC, max UDMA/133 | |
| ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 32), AA | |
| ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata4.00: configured for UDMA/100 | |
| ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata1.00: configured for UDMA/133 | |
| ata2.00: supports DRM functions and may not be fully accessible | |
| scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72106 A3GC PQ: 0 ANSI: 5 | |
| usb 1-1: new full-speed USB device number 2 using xhci_hcd | |
| sd 0:0:0:0: Attached scsi generic sg0 type 0 | |
| sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) | |
| sd 0:0:0:0: [sda] Write Protect is off | |
| sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
| sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
| ata2.00: configured for UDMA/133 | |
| scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 | |
| sd 1:0:0:0: Attached scsi generic sg1 type 0 | |
| ata2.00: Enabling discard_zeroes_data | |
| sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) | |
| sd 1:0:0:0: [sdb] Write Protect is off | |
| sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 | |
| sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
| ata2.00: Enabling discard_zeroes_data | |
| ata2.00: Enabling discard_zeroes_data | |
| sd 1:0:0:0: [sdb] supports TCG Opal | |
| sd 1:0:0:0: [sdb] Attached SCSI disk | |
| scsi 3:0:0:0: CD-ROM HP DVD Writer 1260t BH21 PQ: 0 ANSI: 5 | |
| sda: sda1 sda2 sda3 | |
| sd 0:0:0:0: [sda] Attached SCSI disk | |
| sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray | |
| cdrom: Uniform CD-ROM driver Revision: 3.20 | |
| sr 3:0:0:0: Attached scsi CD-ROM sr0 | |
| sr 3:0:0:0: Attached scsi generic sg2 type 5 | |
| Freeing unused decrypted memory: 2040K | |
| Freeing unused kernel image (initmem) memory: 2560K | |
| Write protecting the kernel read-only data: 22528k | |
| Freeing unused kernel image (text/rodata gap) memory: 2044K | |
| Freeing unused kernel image (rodata/data gap) memory: 1168K | |
| x86/mm: Checked W+X mappings: passed, no W+X pages found. | |
| rodata_test: all tests were successful | |
| x86/mm: Checking user space page tables | |
| x86/mm: Checked W+X mappings: passed, no W+X pages found. | |
| Run /init as init process | |
| usb 1-1: New USB device found, idVendor=046d, idProduct=c537, bcdDevice=34.00 | |
| usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
| usb 1-1: Product: USB Receiver | |
| usb 1-1: Manufacturer: Logitech | |
| input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C537.0001/input/input3 | |
| hid-generic 0003:046D:C537.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0 | |
| systemd[1]: systemd v241-14.git18dd3fb.fc30 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid) | |
| input: Logitech USB Receiver Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C537.0002/input/input4 | |
| systemd[1]: Detected architecture x86-64. | |
| systemd[1]: Running in initial RAM disk. | |
| systemd[1]: Set hostname to <storm>. | |
| input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C537.0002/input/input5 | |
| input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C537.0002/input/input6 | |
| input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C537.0002/input/input9 | |
| hid-generic 0003:046D:C537.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input1 | |
| systemd[1]: Listening on Journal Socket. | |
| systemd[1]: Reached target Swap. | |
| systemd[1]: Listening on udev Control Socket. | |
| systemd[1]: Listening on Journal Socket (/dev/log). | |
| systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice. | |
| systemd[1]: Listening on udev Kernel Socket. | |
| fuse: init (API version 7.31) | |
| *** VALIDATE fuse *** | |
| *** VALIDATE fuse *** | |
| fbcon: Taking over console | |
| Console: switching to colour frame buffer device 128x48 | |
| usb 1-2: new high-speed USB device number 3 using xhci_hcd | |
| audit: type=1130 audit(1584240516.132:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584240516.188:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| usb 1-2: New USB device found, idVendor=046d, idProduct=081b, bcdDevice= 0.12 | |
| usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 | |
| usb 1-2: SerialNumber: 080F2E80 | |
| audit: type=1130 audit(1584240516.253:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584240516.267:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| nvme nvme0: pci function 0000:05:00.0 | |
| e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k | |
| e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode | |
| AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <[email protected]> | |
| AMD-Vi: AMD IOMMUv2 functionality not available on this system | |
| tsc: Refined TSC clocksource calibration: 3695.999 MHz | |
| clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d2284b57, max_idle_ns: 881590451434 ns | |
| usb 1-3: new high-speed USB device number 4 using xhci_hcd | |
| clocksource: Switched to clocksource tsc | |
| usb 1-3: New USB device found, idVendor=03f0, idProduct=7511, bcdDevice= 1.00 | |
| usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 1-3: Product: Photosmart C4700 series | |
| usb 1-3: Manufacturer: HP | |
| usb 1-3: SerialNumber: CN98CHB1M505CN | |
| usb 1-4: new low-speed USB device number 5 using xhci_hcd | |
| e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock | |
| nvme nvme0: 7/0/0 default/read/poll queues | |
| [drm] amdgpu kernel modesetting enabled. | |
| CRAT table not found | |
| Virtual CRAT table created for CPU | |
| Parsing CRAT table with 1 nodes | |
| Creating topology SYSFS entries | |
| Topology: Add CPU node | |
| Finished initializing topology | |
| checking generic (c0000000 300000) vs hw (c0000000 10000000) | |
| fb0: switching to amdgpudrmfb from EFI VGA | |
| Console: switching to colour dummy device 80x25 | |
| amdgpu 0000:03:00.0: vgaarb: deactivate vga console | |
| [drm] initializing kernel modesetting (NAVI14 0x1002:0x7340 0x1682:0x5501 0xC5). | |
| [drm] register mmio base: 0xDFB00000 | |
| [drm] register mmio size: 524288 | |
| nvme0n1: p1 p2 p3 p4 p5 | |
| [drm] set register base offset for ATHUB | |
| [drm] set register base offset for CLKA | |
| [drm] set register base offset for CLKA | |
| [drm] set register base offset for CLKA | |
| [drm] set register base offset for CLKA | |
| [drm] set register base offset for CLKA | |
| [drm] set register base offset for DF | |
| [drm] set register base offset for DMU | |
| [drm] set register base offset for GC | |
| [drm] set register base offset for HDP | |
| [drm] set register base offset for MMHUB | |
| [drm] set register base offset for MP0 | |
| [drm] set register base offset for MP1 | |
| [drm] set register base offset for NBIF | |
| [drm] set register base offset for NBIF | |
| [drm] set register base offset for OSSSYS | |
| [drm] set register base offset for SDMA0 | |
| [drm] set register base offset for SDMA1 | |
| [drm] set register base offset for SMUIO | |
| [drm] set register base offset for THM | |
| [drm] set register base offset for UVD | |
| [drm] add ip block number 0 <nv_common> | |
| [drm] add ip block number 1 <gmc_v10_0> | |
| [drm] add ip block number 2 <navi10_ih> | |
| [drm] add ip block number 3 <psp> | |
| [drm] add ip block number 4 <smu> | |
| [drm] add ip block number 5 <dm> | |
| [drm] add ip block number 6 <gfx_v10_0> | |
| [drm] add ip block number 7 <sdma_v5_0> | |
| [drm] add ip block number 8 <vcn_v2_0> | |
| amdgpu 0000:03:00.0: No more image in the PCI ROM | |
| ATOM BIOS: 113-55X86SSD2-X02 | |
| [drm] VCN decode is enabled in VM mode | |
| [drm] VCN encode is enabled in VM mode | |
| [drm] VCN jpeg decode is enabled in VM mode | |
| [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit | |
| amdgpu 0000:03:00.0: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used) | |
| amdgpu 0000:03:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF | |
| [drm] Detected VRAM RAM=8176M, BAR=256M | |
| [drm] RAM width 128bits GDDR6 | |
| [TTM] Zone kernel: Available graphics memory: 32892286 KiB | |
| [TTM] Zone dma32: Available graphics memory: 2097152 KiB | |
| [TTM] Initializing pool allocator | |
| [TTM] Initializing DMA pool allocator | |
| [drm] amdgpu: 8176M of VRAM memory ready | |
| [drm] amdgpu: 8176M of GTT memory ready. | |
| [drm] GART: num cpu pages 131072, num gpu pages 131072 | |
| [drm] PCIE GART of 512M enabled (table at 0x0000008000300000). | |
| [drm] use_doorbell being set to: [true] | |
| [drm] use_doorbell being set to: [true] | |
| [drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 13 | |
| [drm] PSP loading VCN firmware | |
| e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) b0:6e:bf:cd:9f:19 | |
| e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection | |
| e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF | |
| usb 1-4: New USB device found, idVendor=046a, idProduct=0048, bcdDevice= 0.26 | |
| usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 1-4: Product: Das Keyboard | |
| input: Das Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046A:0048.0003/input/input10 | |
| hid-generic 0003:046A:0048.0003: input,hidraw2: USB HID v1.11 Keyboard [Das Keyboard] on usb-0000:00:14.0-4/input0 | |
| usb 1-9: new full-speed USB device number 6 using xhci_hcd | |
| e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 | |
| PM: Image not found (code -22) | |
| audit: type=1130 audit(1584240516.952:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-disk-by\x2duuid-b601758a\x2d19c6\x2d4dc7\x2dac67\x2dead9cacc7921 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584240516.952:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-disk-by\x2duuid-b601758a\x2d19c6\x2d4dc7\x2dac67\x2dead9cacc7921 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584240516.956:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| usb 1-9: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 | |
| usb 1-9: New USB device strings: Mfr=0, Product=2, SerialNumber=0 | |
| usb 1-9: Product: CSR8510 A10 | |
| usb 1-10: new high-speed USB device number 7 using xhci_hcd | |
| [drm] reserve 0xa00000 from 0x81fe400000 for PSP TMR | |
| amdgpu: [powerplay] use vbios provided pptable | |
| amdgpu: [powerplay] smu driver if version = 0x00000034, smu fw if version = 0x00000036, smu fw version = 0x00351a00 (53.26.0) | |
| amdgpu: [powerplay] SMU driver if version not matched | |
| amdgpu: [powerplay] SMU is initialized successfully! | |
| [drm] Display Core initialized with v3.2.56! | |
| [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [drm] Driver supports precise vblank timestamp query. | |
| [drm] kiq ring mec 2 pipe 1 q 0 | |
| [drm] ring test on 10 succeeded in 58 usecs | |
| [drm] ring test on 10 succeeded in 19 usecs | |
| [drm] gfx 0 ring me 0 pipe 0 q 0 | |
| [drm] ring test on 0 succeeded in 15 usecs | |
| [drm] gfx 1 ring me 0 pipe 1 q 0 | |
| [drm] ring test on 1 succeeded in 2 usecs | |
| [drm] compute ring 0 mec 1 pipe 0 q 0 | |
| [drm] ring test on 2 succeeded in 4 usecs | |
| [drm] compute ring 1 mec 1 pipe 1 q 0 | |
| [drm] ring test on 3 succeeded in 2 usecs | |
| [drm] compute ring 2 mec 1 pipe 2 q 0 | |
| [drm] ring test on 4 succeeded in 2 usecs | |
| [drm] compute ring 3 mec 1 pipe 3 q 0 | |
| [drm] ring test on 5 succeeded in 2 usecs | |
| [drm] compute ring 4 mec 1 pipe 0 q 1 | |
| [drm] ring test on 6 succeeded in 2 usecs | |
| [drm] compute ring 5 mec 1 pipe 1 q 1 | |
| [drm] ring test on 7 succeeded in 2 usecs | |
| [drm] compute ring 6 mec 1 pipe 2 q 1 | |
| [drm] ring test on 8 succeeded in 2 usecs | |
| [drm] compute ring 7 mec 1 pipe 3 q 1 | |
| [drm] ring test on 9 succeeded in 2 usecs | |
| [drm] ring test on 11 succeeded in 6 usecs | |
| [drm] ring test on 12 succeeded in 6 usecs | |
| [drm] VCN decode and encode initialized successfully(under DPG Mode). | |
| kfd kfd: Allocated 3969056 bytes on gart | |
| Virtual CRAT table created for GPU | |
| Parsing CRAT table with 1 nodes | |
| Creating topology SYSFS entries | |
| Topology: Add dGPU node [0x7340:0x1002] | |
| kfd kfd: added device 1002:7340 | |
| [drm] fb mappable at 0xC04C9000 | |
| [drm] vram apper at 0xC0000000 | |
| [drm] size 14745600 | |
| [drm] fb depth is 24 | |
| [drm] pitch is 10240 | |
| fbcon: amdgpudrmfb (fb0) is primary device | |
| Console: switching to colour frame buffer device 320x90 | |
| amdgpu 0000:03:00.0: fb0: amdgpudrmfb frame buffer device | |
| amdgpu 0000:03:00.0: ring 0(gfx_0.0.0) uses VM inv eng 4 on hub 0 | |
| amdgpu 0000:03:00.0: ring 1(gfx_0.1.0) uses VM inv eng 5 on hub 0 | |
| amdgpu 0000:03:00.0: ring 2(comp_1.0.0) uses VM inv eng 6 on hub 0 | |
| amdgpu 0000:03:00.0: ring 3(comp_1.1.0) uses VM inv eng 7 on hub 0 | |
| amdgpu 0000:03:00.0: ring 4(comp_1.2.0) uses VM inv eng 8 on hub 0 | |
| amdgpu 0000:03:00.0: ring 5(comp_1.3.0) uses VM inv eng 9 on hub 0 | |
| amdgpu 0000:03:00.0: ring 6(comp_1.0.1) uses VM inv eng 10 on hub 0 | |
| amdgpu 0000:03:00.0: ring 7(comp_1.1.1) uses VM inv eng 11 on hub 0 | |
| amdgpu 0000:03:00.0: ring 8(comp_1.2.1) uses VM inv eng 12 on hub 0 | |
| amdgpu 0000:03:00.0: ring 9(comp_1.3.1) uses VM inv eng 13 on hub 0 | |
| amdgpu 0000:03:00.0: ring 10(kiq_2.1.0) uses VM inv eng 14 on hub 0 | |
| amdgpu 0000:03:00.0: ring 11(sdma0) uses VM inv eng 15 on hub 0 | |
| amdgpu 0000:03:00.0: ring 12(sdma1) uses VM inv eng 16 on hub 0 | |
| amdgpu 0000:03:00.0: ring 13(vcn_dec) uses VM inv eng 4 on hub 1 | |
| amdgpu 0000:03:00.0: ring 14(vcn_enc0) uses VM inv eng 5 on hub 1 | |
| amdgpu 0000:03:00.0: ring 15(vcn_enc1) uses VM inv eng 6 on hub 1 | |
| amdgpu 0000:03:00.0: ring 16(vcn_jpeg) uses VM inv eng 7 on hub 1 | |
| [drm] Initialized amdgpu 3.36.0 20150101 for 0000:03:00.0 on minor 0 | |
| [drm] ib test on ring 0 succeeded | |
| [drm] ib test on ring 1 succeeded | |
| [drm] ib test on ring 2 succeeded | |
| [drm] ib test on ring 3 succeeded | |
| [drm] ib test on ring 4 succeeded | |
| [drm] ib test on ring 5 succeeded | |
| [drm] ib test on ring 6 succeeded | |
| [drm] ib test on ring 7 succeeded | |
| [drm] ib test on ring 8 succeeded | |
| [drm] ib test on ring 9 succeeded | |
| [drm] ib test on ring 10 succeeded | |
| [drm] ib test on ring 11 succeeded | |
| [drm] ib test on ring 12 succeeded | |
| audit: type=1701 audit(1584240518.140:9): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=kernel pid=492 comm="plymouthd" exe="/usr/sbin/plymouthd" sig=11 res=1 | |
| audit: type=1131 audit(1584240518.167:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed' | |
| usb 1-10: device descriptor read/8, error -110 | |
| usb 1-10: New USB device found, idVendor=154b, idProduct=00ee, bcdDevice= 1.00 | |
| usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 1-10: Product: USB 2.0 FD | |
| usb 1-10: Manufacturer: PNY | |
| usb 1-10: SerialNumber: 9000971DA32A3922 | |
| usb-storage 1-3:1.3: USB Mass Storage device detected | |
| scsi host6: usb-storage 1-3:1.3 | |
| usb-storage 1-10:1.0: USB Mass Storage device detected | |
| scsi host7: usb-storage 1-10:1.0 | |
| usbcore: registered new interface driver usb-storage | |
| usbcore: registered new interface driver uas | |
| audit: type=1130 audit(1584240522.569:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584240522.599:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null) | |
| audit: type=1130 audit(1584240522.717:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584240522.717:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584240522.846:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584240522.873:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584240522.879:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584240522.883:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584240522.887:19): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584240522.888:20): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| systemd-journald[351]: Received SIGTERM from PID 1 (systemd). | |
| printk: systemd: 25 output lines suppressed due to ratelimiting | |
| SELinux: Permission watch in class filesystem not defined in policy. | |
| SELinux: Permission watch in class file not defined in policy. | |
| SELinux: Permission watch_mount in class file not defined in policy. | |
| SELinux: Permission watch_sb in class file not defined in policy. | |
| SELinux: Permission watch_with_perm in class file not defined in policy. | |
| SELinux: Permission watch_reads in class file not defined in policy. | |
| SELinux: Permission watch in class dir not defined in policy. | |
| SELinux: Permission watch_mount in class dir not defined in policy. | |
| SELinux: Permission watch_sb in class dir not defined in policy. | |
| SELinux: Permission watch_with_perm in class dir not defined in policy. | |
| SELinux: Permission watch_reads in class dir not defined in policy. | |
| SELinux: Permission watch in class lnk_file not defined in policy. | |
| SELinux: Permission watch_mount in class lnk_file not defined in policy. | |
| SELinux: Permission watch_sb in class lnk_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class lnk_file not defined in policy. | |
| SELinux: Permission watch_reads in class lnk_file not defined in policy. | |
| SELinux: Permission watch in class chr_file not defined in policy. | |
| SELinux: Permission watch_mount in class chr_file not defined in policy. | |
| SELinux: Permission watch_sb in class chr_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class chr_file not defined in policy. | |
| SELinux: Permission watch_reads in class chr_file not defined in policy. | |
| SELinux: Permission watch in class blk_file not defined in policy. | |
| SELinux: Permission watch_mount in class blk_file not defined in policy. | |
| SELinux: Permission watch_sb in class blk_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class blk_file not defined in policy. | |
| SELinux: Permission watch_reads in class blk_file not defined in policy. | |
| SELinux: Permission watch in class sock_file not defined in policy. | |
| SELinux: Permission watch_mount in class sock_file not defined in policy. | |
| SELinux: Permission watch_sb in class sock_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class sock_file not defined in policy. | |
| SELinux: Permission watch_reads in class sock_file not defined in policy. | |
| SELinux: Permission watch in class fifo_file not defined in policy. | |
| SELinux: Permission watch_mount in class fifo_file not defined in policy. | |
| SELinux: Permission watch_sb in class fifo_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class fifo_file not defined in policy. | |
| SELinux: Permission watch_reads in class fifo_file not defined in policy. | |
| SELinux: Class perf_event not defined in policy. | |
| SELinux: the above unknown classes and permissions will be allowed | |
| SELinux: policy capability network_peer_controls=1 | |
| SELinux: policy capability open_perms=1 | |
| SELinux: policy capability extended_socket_class=1 | |
| SELinux: policy capability always_check_network=0 | |
| SELinux: policy capability cgroup_seclabel=1 | |
| SELinux: policy capability nnp_nosuid_transition=1 | |
| systemd[1]: Successfully loaded SELinux policy in 363.756ms. | |
| systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 28.792ms. | |
| systemd[1]: systemd v243.7-1.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) | |
| systemd[1]: Detected architecture x86-64. | |
| systemd[1]: Set hostname to <storm>. | |
| scsi 6:0:0:0: Direct-Access HP Photosmart C4700 1.00 PQ: 0 ANSI: 5 | |
| sd 6:0:0:0: Attached scsi generic sg3 type 0 | |
| sd 6:0:0:0: [sdc] Attached SCSI removable disk | |
| systemd[1]: /usr/lib/systemd/system/iscsid.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsid.pid → /run/iscsid.pid; please update the unit file accordingly. | |
| systemd[1]: /usr/lib/systemd/system/iscsiuio.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly. | |
| systemd[1]: /usr/lib/systemd/system/libvirtd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-admin-sock → /run/libvirt/libvirt-admin-sock; please update the unit file accordingly. | |
| systemd[1]: /usr/lib/systemd/system/libvirtd-ro.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock-ro → /run/libvirt/libvirt-sock-ro; please update the unit file accordingly. | |
| systemd[1]: /usr/lib/systemd/system/libvirtd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock → /run/libvirt/libvirt-sock; please update the unit file accordingly. | |
| systemd[1]: /usr/lib/systemd/system/virtlockd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly. | |
| systemd[1]: /usr/lib/systemd/system/virtlockd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-admin-sock → /run/libvirt/virtlockd-admin-sock; please update the unit file accordingly. | |
| vboxdrv: loading out-of-tree module taints kernel. | |
| vboxdrv: module verification failed: signature and/or required key missing - tainting kernel | |
| EXT4-fs (nvme0n1p4): re-mounted. Opts: (null) | |
| vboxdrv: Found 12 processor cores | |
| Adding 33012732k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:33012732k SSFS | |
| vboxdrv: TSC mode is Invariant, tentative frequency 3695983991 Hz | |
| vboxdrv: Successfully loaded version 6.1.4_RPMFusion (interface 0x002d0001) | |
| VBoxNetFlt: Successfully started. | |
| VBoxNetAdp: Successfully started. | |
| systemd-journald[668]: Received client request to flush runtime journal. | |
| EDAC ie31200: No ECC support | |
| mei_me 0000:00:16.0: enabling device (0000 -> 0002) | |
| mc: Linux media interface: v0.10 | |
| i801_smbus 0000:00:1f.4: SPD Write Disable is set | |
| i801_smbus 0000:00:1f.4: SMBus using PCI interrupt | |
| input: PC Speaker as /devices/platform/pcspkr/input/input11 | |
| asus_wmi: ASUS WMI generic driver loaded | |
| videodev: Linux video capture interface: v2.00 | |
| asus_wmi: Initialization: 0x0 | |
| asus_wmi: BIOS WMI version: 0.9 | |
| asus_wmi: SFUN value: 0x0 | |
| eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS | |
| input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12 | |
| RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer | |
| RAPL PMU: hw unit of domain pp0-core 2^-14 Joules | |
| RAPL PMU: hw unit of domain package 2^-14 Joules | |
| RAPL PMU: hw unit of domain dram 2^-14 Joules | |
| Bluetooth: Core ver 2.22 | |
| NET: Registered protocol family 31 | |
| Bluetooth: HCI device and connection manager initialized | |
| Bluetooth: HCI socket layer initialized | |
| Bluetooth: L2CAP socket layer initialized | |
| Bluetooth: SCO socket layer initialized | |
| uvcvideo: Found UVC 1.00 device <unnamed> (046d:081b) | |
| snd_hda_intel 0000:03:00.1: Force to non-snoop mode | |
| uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Extension 6 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Extension 7 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Extension 3 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized! | |
| input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input13 | |
| usbcore: registered new interface driver uvcvideo | |
| USB Video Class driver (1.1.1) | |
| usbcore: registered new interface driver btusb | |
| snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) | |
| input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input14 | |
| input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input15 | |
| input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input16 | |
| input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input17 | |
| input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input18 | |
| input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card1/input19 | |
| snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line | |
| snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) | |
| snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) | |
| snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 | |
| snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x0 | |
| snd_hda_codec_realtek hdaudioC0D0: inputs: | |
| snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 | |
| snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 | |
| snd_hda_codec_realtek hdaudioC0D0: Line=0x1a | |
| input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 | |
| input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 | |
| input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 | |
| input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23 | |
| input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24 | |
| input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25 | |
| input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26 | |
| WARNING! power/level is deprecated; use power/control instead | |
| iTCO_vendor_support: vendor-support=0 | |
| usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7511 | |
| usbcore: registered new interface driver usblp | |
| iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 | |
| iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) | |
| iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) | |
| intel_rapl_common: Found RAPL domain package | |
| intel_rapl_common: Found RAPL domain core | |
| intel_rapl_common: Found RAPL domain dram | |
| scsi 7:0:0:0: Direct-Access PNY USB 2.0 FD PMAP PQ: 0 ANSI: 6 | |
| sd 7:0:0:0: Attached scsi generic sg4 type 0 | |
| sd 7:0:0:0: [sdd] 60628992 512-byte logical blocks: (31.0 GB/28.9 GiB) | |
| sd 7:0:0:0: [sdd] Write Protect is off | |
| sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00 | |
| sd 7:0:0:0: [sdd] No Caching mode page found | |
| sd 7:0:0:0: [sdd] Assuming drive cache: write through | |
| sdd: sdd1 sdd2 sdd3 | |
| sd 7:0:0:0: [sdd] Attached SCSI removable disk | |
| usb 1-2: set resolution quirk: cval->res = 384 | |
| usbcore: registered new interface driver snd-usb-audio | |
| ata2.00: Enabling discard_zeroes_data | |
| EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) | |
| EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null) | |
| EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null) | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
| Bluetooth: BNEP filters: protocol multicast | |
| Bluetooth: BNEP socket layer initialized | |
| usblp0: removed | |
| usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7511 | |
| e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx | |
| IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready | |
| FS-Cache: Loaded | |
| Key type dns_resolver registered | |
| FS-Cache: Netfs 'cifs' registered for caching | |
| Key type cifs.spnego registered | |
| Key type cifs.idmap registered | |
| CIFS: Attempting to mount //192.168.1.150/patocarr | |
| No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount. | |
| bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. | |
| tun: Universal TUN/TAP device driver, 1.6 | |
| virbr0: port 1(virbr0-nic) entered blocking state | |
| virbr0: port 1(virbr0-nic) entered disabled state | |
| device virbr0-nic entered promiscuous mode | |
| virbr0: port 1(virbr0-nic) entered blocking state | |
| virbr0: port 1(virbr0-nic) entered listening state | |
| virbr0: port 1(virbr0-nic) entered disabled state | |
| Bluetooth: RFCOMM TTY layer initialized | |
| Bluetooth: RFCOMM socket layer initialized | |
| Bluetooth: RFCOMM ver 1.11 | |
| usb 1-2: reset high-speed USB device number 3 using xhci_hcd | |
| L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details. | |
| rfkill: input handler disabled | |
| rfkill: input handler enabled | |
| ISO 9660 Extensions: Microsoft Joliet Level 3 | |
| ISO 9660 Extensions: Microsoft Joliet Level 3 | |
| ISO 9660 Extensions: RRIP_1991A | |
| rfkill: input handler disabled | |
| CIFS VFS: Autodisabling the use of server inode numbers on \\192.168.1.150\patocarr. | |
| CIFS VFS: The server doesn't seem to support them properly or the files might be on different servers (DFS). | |
| CIFS VFS: Hardlinks will not be recognized on this mount. Consider mounting with the "noserverino" option to silence this message. |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Fedora 31 booting the latest kernel | |
| AMD GTX 5500 XT Graphics card not detected, loads fallback framebuffer (1024x768), no drm or amdgpu loaded. | |
| Linux version 5.5.8-200.fc31.x86_64 ([email protected]) (gcc version 9.2.1 20190827 (Red Hat 9.2.1-1) (GCC)) #1 SMP Thu Mar 5 21:28:03 UTC 2020 | |
| Command line: BOOT_IMAGE=(hd5,gpt2)/vmlinuz-5.5.8-200.fc31.x86_64 root=UUID=9361e6c3-623e-42ff-8cd2-41be5b02d8c9 ro resume=UUID=b601758a-19c6-4dc7-ac67-ead9cacc7921 rhgb quiet | |
| x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' | |
| x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' | |
| x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' | |
| x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' | |
| x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' | |
| x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 | |
| x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 | |
| x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 | |
| x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. | |
| BIOS-provided physical RAM map: | |
| BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable | |
| BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved | |
| BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable | |
| BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved | |
| BIOS-e820: [mem 0x0000000000100000-0x000000007f9cdfff] usable | |
| BIOS-e820: [mem 0x000000007f9ce000-0x000000007f9cefff] ACPI NVS | |
| BIOS-e820: [mem 0x000000007f9cf000-0x000000007f9cffff] reserved | |
| BIOS-e820: [mem 0x000000007f9d0000-0x000000008c655fff] usable | |
| BIOS-e820: [mem 0x000000008c656000-0x000000008df11fff] reserved | |
| BIOS-e820: [mem 0x000000008df12000-0x000000008df6bfff] ACPI data | |
| BIOS-e820: [mem 0x000000008df6c000-0x000000008e35dfff] ACPI NVS | |
| BIOS-e820: [mem 0x000000008e35e000-0x000000008f7a1fff] reserved | |
| BIOS-e820: [mem 0x000000008f7a2000-0x000000008f7fffff] usable | |
| BIOS-e820: [mem 0x000000008f800000-0x000000008fffffff] reserved | |
| BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved | |
| BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved | |
| BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved | |
| BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved | |
| BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved | |
| BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved | |
| BIOS-e820: [mem 0x0000000100000000-0x000000106effffff] usable | |
| NX (Execute Disable) protection: active | |
| e820: update [mem 0x7cd86018-0x7cd9ea57] usable ==> usable | |
| e820: update [mem 0x7cd86018-0x7cd9ea57] usable ==> usable | |
| e820: update [mem 0x7cd75018-0x7cd85e57] usable ==> usable | |
| e820: update [mem 0x7cd75018-0x7cd85e57] usable ==> usable | |
| extended physical RAM map: | |
| reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable | |
| reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved | |
| reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable | |
| reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved | |
| reserve setup_data: [mem 0x0000000000100000-0x000000007cd75017] usable | |
| reserve setup_data: [mem 0x000000007cd75018-0x000000007cd85e57] usable | |
| reserve setup_data: [mem 0x000000007cd85e58-0x000000007cd86017] usable | |
| reserve setup_data: [mem 0x000000007cd86018-0x000000007cd9ea57] usable | |
| reserve setup_data: [mem 0x000000007cd9ea58-0x000000007f9cdfff] usable | |
| reserve setup_data: [mem 0x000000007f9ce000-0x000000007f9cefff] ACPI NVS | |
| reserve setup_data: [mem 0x000000007f9cf000-0x000000007f9cffff] reserved | |
| reserve setup_data: [mem 0x000000007f9d0000-0x000000008c655fff] usable | |
| reserve setup_data: [mem 0x000000008c656000-0x000000008df11fff] reserved | |
| reserve setup_data: [mem 0x000000008df12000-0x000000008df6bfff] ACPI data | |
| reserve setup_data: [mem 0x000000008df6c000-0x000000008e35dfff] ACPI NVS | |
| reserve setup_data: [mem 0x000000008e35e000-0x000000008f7a1fff] reserved | |
| reserve setup_data: [mem 0x000000008f7a2000-0x000000008f7fffff] usable | |
| reserve setup_data: [mem 0x000000008f800000-0x000000008fffffff] reserved | |
| reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved | |
| reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved | |
| reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved | |
| reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved | |
| reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved | |
| reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved | |
| reserve setup_data: [mem 0x0000000100000000-0x000000106effffff] usable | |
| efi: EFI v2.60 by American Megatrends | |
| efi: ACPI 2.0=0x8df35000 ACPI=0x8df35000 SMBIOS=0x8f635000 SMBIOS 3.0=0x8f634000 MPS=0xfcb20 ESRT=0x87d5bf18 MEMATTR=0x87b7f018 | |
| secureboot: Secure boot disabled | |
| SMBIOS 3.0.0 present. | |
| DMI: System manufacturer System Product Name/TUF Z370-PRO GAMING, BIOS 0215 09/05/2017 | |
| tsc: Detected 3700.000 MHz processor | |
| tsc: Detected 3699.850 MHz TSC | |
| e820: update [mem 0x00000000-0x00000fff] usable ==> reserved | |
| e820: remove [mem 0x000a0000-0x000fffff] usable | |
| last_pfn = 0x106f000 max_arch_pfn = 0x400000000 | |
| MTRR default type: write-back | |
| MTRR fixed ranges enabled: | |
| 00000-9FFFF write-back | |
| A0000-BFFFF uncachable | |
| C0000-FFFFF write-protect | |
| MTRR variable ranges enabled: | |
| 0 base 00C0000000 mask 7FC0000000 uncachable | |
| 1 base 00A0000000 mask 7FE0000000 uncachable | |
| 2 base 0090000000 mask 7FF0000000 uncachable | |
| 3 disabled | |
| 4 disabled | |
| 5 disabled | |
| 6 disabled | |
| 7 disabled | |
| 8 disabled | |
| 9 disabled | |
| x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT | |
| last_pfn = 0x8f800 max_arch_pfn = 0x400000000 | |
| found SMP MP-table at [mem 0x000fce00-0x000fce0f] | |
| esrt: Reserving ESRT space from 0x0000000087d5bf18 to 0x0000000087d5bf50. | |
| e820: update [mem 0x87d5b000-0x87d5bfff] usable ==> reserved | |
| Using GB pages for direct mapping | |
| BRK [0x43b601000, 0x43b601fff] PGTABLE | |
| BRK [0x43b602000, 0x43b602fff] PGTABLE | |
| BRK [0x43b603000, 0x43b603fff] PGTABLE | |
| BRK [0x43b604000, 0x43b604fff] PGTABLE | |
| BRK [0x43b605000, 0x43b605fff] PGTABLE | |
| BRK [0x43b606000, 0x43b606fff] PGTABLE | |
| BRK [0x43b607000, 0x43b607fff] PGTABLE | |
| BRK [0x43b608000, 0x43b608fff] PGTABLE | |
| BRK [0x43b609000, 0x43b609fff] PGTABLE | |
| BRK [0x43b60a000, 0x43b60afff] PGTABLE | |
| secureboot: Secure boot disabled | |
| RAMDISK: [mem 0x7cd9f000-0x7f09afff] | |
| ACPI: Early table checksum verification disabled | |
| ACPI: RSDP 0x000000008DF35000 000024 (v02 ALASKA) | |
| ACPI: XSDT 0x000000008DF350A8 0000CC (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: FACP 0x000000008DF5F348 000114 (v06 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: DSDT 0x000000008DF35210 02A132 (v02 ALASKA A M I 01072009 INTL 20160422) | |
| ACPI: FACS 0x000000008E35DF00 000040 | |
| ACPI: APIC 0x000000008DF5F460 0000F4 (v03 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: FPDT 0x000000008DF5F558 000044 (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: FIDT 0x000000008DF5F5A0 00009C (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: WSMT 0x000000008DF6AFA0 000028 (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: MCFG 0x000000008DF5F698 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) | |
| ACPI: SSDT 0x000000008DF5F6D8 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF5FA80 003156 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF62BD8 002611 (v02 PegSsd PegSsdt 00001000 INTL 20160422) | |
| ACPI: HPET 0x000000008DF651F0 000038 (v01 INTEL KBL 00000001 MSFT 0000005F) | |
| ACPI: SSDT 0x000000008DF65228 000B13 (v02 INTEL xh_rvp08 00000000 INTL 20160422) | |
| ACPI: UEFI 0x000000008DF65D40 000042 (v01 ALASKA A M I 00000002 01000013) | |
| ACPI: SSDT 0x000000008DF65D88 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) | |
| ACPI: LPIT 0x000000008DF67538 000094 (v01 INTEL KBL 00000000 MSFT 0000005F) | |
| ACPI: SSDT 0x000000008DF675D0 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF67718 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF679B8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF6A9C0 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422) | |
| ACPI: DBGP 0x000000008DF6AED8 000034 (v01 INTEL 00000002 MSFT 0000005F) | |
| ACPI: DBG2 0x000000008DF6AF10 000054 (v00 INTEL 00000002 MSFT 0000005F) | |
| ACPI: BGRT 0x000000008DF6AF68 000038 (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: Local APIC address 0xfee00000 | |
| No NUMA configuration found | |
| Faking a node at [mem 0x0000000000000000-0x000000106effffff] | |
| NODE_DATA(0) allocated [mem 0x106efd5000-0x106effffff] | |
| Zone ranges: | |
| DMA [mem 0x0000000000001000-0x0000000000ffffff] | |
| DMA32 [mem 0x0000000001000000-0x00000000ffffffff] | |
| Normal [mem 0x0000000100000000-0x000000106effffff] | |
| Device empty | |
| Movable zone start for each node | |
| Early memory node ranges | |
| node 0: [mem 0x0000000000001000-0x0000000000057fff] | |
| node 0: [mem 0x0000000000059000-0x000000000009efff] | |
| node 0: [mem 0x0000000000100000-0x000000007f9cdfff] | |
| node 0: [mem 0x000000007f9d0000-0x000000008c655fff] | |
| node 0: [mem 0x000000008f7a2000-0x000000008f7fffff] | |
| node 0: [mem 0x0000000100000000-0x000000106effffff] | |
| Zeroed struct page in unavailable ranges: 18865 pages | |
| Initmem setup node 0 [mem 0x0000000000001000-0x000000106effffff] | |
| On node 0 totalpages: 16758351 | |
| DMA zone: 64 pages used for memmap | |
| DMA zone: 26 pages reserved | |
| DMA zone: 3997 pages, LIFO batch:0 | |
| DMA32 zone: 8923 pages used for memmap | |
| DMA32 zone: 571058 pages, LIFO batch:63 | |
| Normal zone: 252864 pages used for memmap | |
| Normal zone: 16183296 pages, LIFO batch:63 | |
| ACPI: PM-Timer IO Port: 0x1808 | |
| ACPI: Local APIC address 0xfee00000 | |
| ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) | |
| IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) | |
| ACPI: IRQ0 used by override. | |
| ACPI: IRQ9 used by override. | |
| Using ACPI (MADT) for SMP configuration information | |
| ACPI: HPET id: 0x8086a201 base: 0xfed00000 | |
| e820: update [mem 0x88d8b000-0x88f3bfff] usable ==> reserved | |
| smpboot: Allowing 12 CPUs, 0 hotplug CPUs | |
| PM: Registered nosave memory: [mem 0x00000000-0x00000fff] | |
| PM: Registered nosave memory: [mem 0x00058000-0x00058fff] | |
| PM: Registered nosave memory: [mem 0x0009f000-0x000fffff] | |
| PM: Registered nosave memory: [mem 0x7cd75000-0x7cd75fff] | |
| PM: Registered nosave memory: [mem 0x7cd85000-0x7cd85fff] | |
| PM: Registered nosave memory: [mem 0x7cd86000-0x7cd86fff] | |
| PM: Registered nosave memory: [mem 0x7cd9e000-0x7cd9efff] | |
| PM: Registered nosave memory: [mem 0x7f9ce000-0x7f9cefff] | |
| PM: Registered nosave memory: [mem 0x7f9cf000-0x7f9cffff] | |
| PM: Registered nosave memory: [mem 0x87d5b000-0x87d5bfff] | |
| PM: Registered nosave memory: [mem 0x88d8b000-0x88f3bfff] | |
| PM: Registered nosave memory: [mem 0x8c656000-0x8df11fff] | |
| PM: Registered nosave memory: [mem 0x8df12000-0x8df6bfff] | |
| PM: Registered nosave memory: [mem 0x8df6c000-0x8e35dfff] | |
| PM: Registered nosave memory: [mem 0x8e35e000-0x8f7a1fff] | |
| PM: Registered nosave memory: [mem 0x8f800000-0x8fffffff] | |
| PM: Registered nosave memory: [mem 0x90000000-0xdfffffff] | |
| PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] | |
| PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff] | |
| PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff] | |
| PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff] | |
| PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] | |
| PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff] | |
| PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] | |
| PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff] | |
| PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] | |
| PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff] | |
| PM: Registered nosave memory: [mem 0xff000000-0xffffffff] | |
| [mem 0x90000000-0xdfffffff] available for PCI devices | |
| Booting paravirtualized kernel on bare hardware | |
| clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns | |
| setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1 | |
| percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 | |
| pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152 | |
| pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- | |
| Built 1 zonelists, mobility grouping on. Total pages: 16496474 | |
| Policy zone: Normal | |
| Kernel command line: BOOT_IMAGE=(hd5,gpt2)/vmlinuz-5.5.8-200.fc31.x86_64 root=UUID=9361e6c3-623e-42ff-8cd2-41be5b02d8c9 ro resume=UUID=b601758a-19c6-4dc7-ac67-ead9cacc7921 rhgb quiet | |
| Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) | |
| Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) | |
| mem auto-init: stack:off, heap alloc:off, heap free:off | |
| Memory: 65664992K/67033404K available (14339K kernel code, 2297K rwdata, 4976K rodata, 2556K init, 4156K bss, 1368412K reserved, 0K cma-reserved) | |
| SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 | |
| Kernel/User page tables isolation: enabled | |
| ftrace: allocating 41462 entries in 162 pages | |
| ftrace: allocated 162 pages with 3 groups | |
| rcu: Hierarchical RCU implementation. | |
| rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12. | |
| Tasks RCU enabled. | |
| rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. | |
| rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 | |
| NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16 | |
| random: crng done (trusting CPU's manufacturer) | |
| Console: colour dummy device 80x25 | |
| printk: console [tty0] enabled | |
| ACPI: Core revision 20191018 | |
| clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns | |
| APIC: Switch to symmetric I/O mode setup | |
| x2apic: IRQ remapping doesn't support X2APIC mode | |
| Switched APIC routing to physical flat. | |
| ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 | |
| clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns | |
| Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=3699850) | |
| pid_max: default: 32768 minimum: 301 | |
| LSM: Security Framework initializing | |
| Yama: becoming mindful. | |
| SELinux: Initializing. | |
| *** VALIDATE SELinux *** | |
| Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| *** VALIDATE tmpfs *** | |
| *** VALIDATE proc *** | |
| *** VALIDATE cgroup1 *** | |
| *** VALIDATE cgroup2 *** | |
| mce: CPU0: Thermal monitoring enabled (TM1) | |
| process: using mwait in idle threads | |
| Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 | |
| Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 | |
| Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization | |
| Spectre V2 : Mitigation: Full generic retpoline | |
| Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch | |
| Speculative Store Bypass: Vulnerable | |
| TAA: Vulnerable: Clear CPU buffers attempted, no microcode | |
| MDS: Vulnerable: Clear CPU buffers attempted, no microcode | |
| Freeing SMP alternatives memory: 36K | |
| TSC deadline timer enabled | |
| smpboot: CPU0: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xa) | |
| Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. | |
| ... version: 4 | |
| ... bit width: 48 | |
| ... generic registers: 4 | |
| ... value mask: 0000ffffffffffff | |
| ... max period: 00007fffffffffff | |
| ... fixed-purpose events: 3 | |
| ... event mask: 000000070000000f | |
| rcu: Hierarchical SRCU implementation. | |
| NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. | |
| smp: Bringing up secondary CPUs ... | |
| x86: Booting SMP configuration: | |
| .... node #0, CPUs: #1 #2 #3 #4 #5 #6 | |
| MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. | |
| TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. | |
| #7 #8 #9 #10 #11 | |
| smp: Brought up 1 node, 12 CPUs | |
| smpboot: Max logical packages: 1 | |
| smpboot: Total of 12 processors activated (88796.40 BogoMIPS) | |
| devtmpfs: initialized | |
| x86/mm: Memory block size: 128MB | |
| PM: Registering ACPI NVS region [mem 0x7f9ce000-0x7f9cefff] (4096 bytes) | |
| PM: Registering ACPI NVS region [mem 0x8df6c000-0x8e35dfff] (4136960 bytes) | |
| clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns | |
| futex hash table entries: 4096 (order: 6, 262144 bytes, linear) | |
| pinctrl core: initialized pinctrl subsystem | |
| PM: RTC time: 03:14:49, date: 2020-03-15 | |
| thermal_sys: Registered thermal governor 'fair_share' | |
| thermal_sys: Registered thermal governor 'bang_bang' | |
| thermal_sys: Registered thermal governor 'step_wise' | |
| thermal_sys: Registered thermal governor 'user_space' | |
| NET: Registered protocol family 16 | |
| audit: initializing netlink subsys (disabled) | |
| audit: type=2000 audit(1584242089.028:1): state=initialized audit_enabled=0 res=1 | |
| cpuidle: using governor menu | |
| KVM setup pv remote TLB flush | |
| ACPI FADT declares the system doesn't support PCIe ASPM, so disable it | |
| ACPI: bus type PCI registered | |
| acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 | |
| PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) | |
| PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 | |
| PCI: Using configuration type 1 for base access | |
| ENERGY_PERF_BIAS: Set to 'normal', was 'performance' | |
| HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages | |
| HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages | |
| cryptd: max_cpu_qlen set to 1000 | |
| alg: No test for 842 (842-generic) | |
| alg: No test for 842 (842-scomp) | |
| ACPI: Added _OSI(Module Device) | |
| ACPI: Added _OSI(Processor Device) | |
| ACPI: Added _OSI(3.0 _SCP Extensions) | |
| ACPI: Added _OSI(Processor Aggregator Device) | |
| ACPI: Added _OSI(Linux-Dell-Video) | |
| ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) | |
| ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) | |
| ACPI: 10 ACPI AML tables successfully acquired and loaded | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9911A7FD1000 00077A (v02 PmRef Cpu0Ist 00003000 INTL 20160422) | |
| ACPI: \_PR_.PR00: _OSC native thermal LVT Acked | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9911A767F800 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9911A7FFD540 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9911A7FD4800 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9911A710E000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9911A767F400 000317 (v02 PmRef ApHwp 00003000 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF9911A7678800 00030A (v02 PmRef ApCst 00003000 INTL 20160422) | |
| ACPI: Interpreter enabled | |
| ACPI: (supports S0 S3 S4 S5) | |
| ACPI: Using IOAPIC for interrupt routing | |
| PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug | |
| ACPI: Enabled 9 GPEs in block 00 to 7F | |
| ACPI: Power Resource [PG00] (on) | |
| ACPI: Power Resource [PG01] (on) | |
| ACPI: Power Resource [PG02] (on) | |
| ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) | |
| acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] | |
| acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] | |
| acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] | |
| acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration | |
| PCI host bridge to bus 0000:00 | |
| pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] | |
| pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] | |
| pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] | |
| pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] | |
| pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] | |
| pci_bus 0000:00: root bus resource [bus 00-fe] | |
| pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000 | |
| pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 | |
| pci 0000:00:01.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330 | |
| pci 0000:00:14.0: reg 0x10: [mem 0xdff30000-0xdff3ffff 64bit] | |
| pci 0000:00:14.0: PME# supported from D3hot D3cold | |
| pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000 | |
| pci 0000:00:16.0: reg 0x10: [mem 0xdff4d000-0xdff4dfff 64bit] | |
| pci 0000:00:16.0: PME# supported from D3hot | |
| pci 0000:00:17.0: [8086:a282] type 00 class 0x010601 | |
| pci 0000:00:17.0: reg 0x10: [mem 0xdff48000-0xdff49fff] | |
| pci 0000:00:17.0: reg 0x14: [mem 0xdff4c000-0xdff4c0ff] | |
| pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057] | |
| pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043] | |
| pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f] | |
| pci 0000:00:17.0: reg 0x24: [mem 0xdff4b000-0xdff4b7ff] | |
| pci 0000:00:17.0: PME# supported from D3hot | |
| pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400 | |
| pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400 | |
| pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400 | |
| pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400 | |
| pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400 | |
| pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1f.0: [8086:a2c9] type 00 class 0x060100 | |
| pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000 | |
| pci 0000:00:1f.2: reg 0x10: [mem 0xdff44000-0xdff47fff] | |
| pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300 | |
| pci 0000:00:1f.3: reg 0x10: [mem 0xdff40000-0xdff43fff 64bit] | |
| pci 0000:00:1f.3: reg 0x20: [mem 0xdff20000-0xdff2ffff 64bit] | |
| pci 0000:00:1f.3: PME# supported from D3hot D3cold | |
| pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500 | |
| pci 0000:00:1f.4: reg 0x10: [mem 0xdff4a000-0xdff4a0ff 64bit] | |
| pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f] | |
| pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000 | |
| pci 0000:00:1f.6: reg 0x10: [mem 0xdff00000-0xdff1ffff] | |
| pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold | |
| pci 0000:01:00.0: [1002:1478] type 01 class 0x060400 | |
| pci 0000:01:00.0: reg 0x10: [mem 0xdfc00000-0xdfc03fff] | |
| pci 0000:01:00.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 126.024 Gb/s with 16 GT/s x8 link) | |
| pci 0000:00:01.0: PCI bridge to [bus 01-03] | |
| pci 0000:00:01.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfcfffff] | |
| pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:02:00.0: [1002:1479] type 01 class 0x060400 | |
| pci 0000:02:00.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:01:00.0: PCI bridge to [bus 02-03] | |
| pci 0000:01:00.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:01:00.0: bridge window [mem 0xdfb00000-0xdfbfffff] | |
| pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:03:00.0: [1002:7340] type 00 class 0x030000 | |
| pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] | |
| pci 0000:03:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] | |
| pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe0ff] | |
| pci 0000:03:00.0: reg 0x24: [mem 0xdfb00000-0xdfb7ffff] | |
| pci 0000:03:00.0: reg 0x30: [mem 0xdfb80000-0xdfb9ffff pref] | |
| pci 0000:03:00.0: BAR 0: assigned to efifb | |
| pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold | |
| pci 0000:03:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16 GT/s x16 link) | |
| pci 0000:03:00.1: [1002:ab38] type 00 class 0x040300 | |
| pci 0000:03:00.1: reg 0x10: [mem 0xdfba0000-0xdfba3fff] | |
| pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold | |
| pci 0000:02:00.0: PCI bridge to [bus 03] | |
| pci 0000:02:00.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:02:00.0: bridge window [mem 0xdfb00000-0xdfbfffff] | |
| pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:00:1b.0: PCI bridge to [bus 04] | |
| pci 0000:05:00.0: [144d:a804] type 00 class 0x010802 | |
| pci 0000:05:00.0: reg 0x10: [mem 0xdfe00000-0xdfe03fff 64bit] | |
| pci 0000:00:1b.4: PCI bridge to [bus 05] | |
| pci 0000:00:1b.4: bridge window [mem 0xdfe00000-0xdfefffff] | |
| pci 0000:00:1c.0: PCI bridge to [bus 06] | |
| pci 0000:07:00.0: [1b21:2142] type 00 class 0x0c0330 | |
| pci 0000:07:00.0: reg 0x10: [mem 0xdfd00000-0xdfd07fff 64bit] | |
| pci 0000:07:00.0: enabling Extended Tags | |
| pci 0000:07:00.0: PME# supported from D0 | |
| pci 0000:00:1c.4: PCI bridge to [bus 07] | |
| pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff] | |
| pci 0000:00:1d.0: PCI bridge to [bus 08] | |
| ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| iommu: Default domain type: Translated | |
| pci 0000:03:00.0: vgaarb: setting as boot VGA device | |
| pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none | |
| pci 0000:03:00.0: vgaarb: bridge control possible | |
| vgaarb: loaded | |
| SCSI subsystem initialized | |
| libata version 3.00 loaded. | |
| ACPI: bus type USB registered | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| pps_core: LinuxPPS API ver. 1 registered | |
| pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| PTP clock support registered | |
| EDAC MC: Ver: 3.0.0 | |
| Registered efivars operations | |
| PCI: Using ACPI for IRQ routing | |
| PCI: pci_cache_line_size set to 64 bytes | |
| e820: reserve RAM buffer [mem 0x00058000-0x0005ffff] | |
| e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff] | |
| e820: reserve RAM buffer [mem 0x7cd75018-0x7fffffff] | |
| e820: reserve RAM buffer [mem 0x7cd86018-0x7fffffff] | |
| e820: reserve RAM buffer [mem 0x7f9ce000-0x7fffffff] | |
| e820: reserve RAM buffer [mem 0x87d5b000-0x87ffffff] | |
| e820: reserve RAM buffer [mem 0x88d8b000-0x8bffffff] | |
| e820: reserve RAM buffer [mem 0x8c656000-0x8fffffff] | |
| e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff] | |
| e820: reserve RAM buffer [mem 0x106f000000-0x106fffffff] | |
| NetLabel: Initializing | |
| NetLabel: domain hash size = 128 | |
| NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
| NetLabel: unlabeled traffic allowed by default | |
| hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 | |
| hpet0: 8 comparators, 64-bit 24.000000 MHz counter | |
| clocksource: Switched to clocksource tsc-early | |
| *** VALIDATE bpf *** | |
| VFS: Disk quotas dquot_6.6.0 | |
| VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| *** VALIDATE ramfs *** | |
| *** VALIDATE hugetlbfs *** | |
| pnp: PnP ACPI init | |
| system 00:00: [io 0x0290-0x029f] has been reserved | |
| system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp 00:01: [dma 0 disabled] | |
| pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) | |
| system 00:02: [io 0x0680-0x069f] has been reserved | |
| system 00:02: [io 0xffff] has been reserved | |
| system 00:02: [io 0xffff] has been reserved | |
| system 00:02: [io 0xffff] has been reserved | |
| system 00:02: [io 0x1800-0x18fe] has been reserved | |
| system 00:02: [io 0x164e-0x164f] has been reserved | |
| system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| system 00:03: [io 0x0800-0x087f] has been reserved | |
| system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) | |
| system 00:05: [io 0x1854-0x1857] has been reserved | |
| system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) | |
| system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved | |
| system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved | |
| system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved | |
| system 00:06: [mem 0xe0000000-0xefffffff] has been reserved | |
| system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved | |
| system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved | |
| system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved | |
| system 00:06: [mem 0xff000000-0xffffffff] has been reserved | |
| system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved | |
| system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved | |
| system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved | |
| system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved | |
| system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved | |
| system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved | |
| system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved | |
| system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved | |
| system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved | |
| system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved | |
| system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved | |
| system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved | |
| system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| system 00:08: [io 0xff00-0xfffe] has been reserved | |
| system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved | |
| system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved | |
| system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved | |
| system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp: PnP ACPI: found 10 devices | |
| clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns | |
| pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 | |
| pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 | |
| pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 | |
| pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000 | |
| pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000 | |
| pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000 | |
| pci 0000:00:1b.0: BAR 14: assigned [mem 0x90000000-0x901fffff] | |
| pci 0000:00:1b.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref] | |
| pci 0000:00:1d.0: BAR 14: assigned [mem 0x90400000-0x905fffff] | |
| pci 0000:00:1d.0: BAR 15: assigned [mem 0x90600000-0x907fffff 64bit pref] | |
| pci 0000:00:1b.0: BAR 13: assigned [io 0x2000-0x2fff] | |
| pci 0000:00:1d.0: BAR 13: assigned [io 0x3000-0x3fff] | |
| pci 0000:02:00.0: PCI bridge to [bus 03] | |
| pci 0000:02:00.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:02:00.0: bridge window [mem 0xdfb00000-0xdfbfffff] | |
| pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:01:00.0: PCI bridge to [bus 02-03] | |
| pci 0000:01:00.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:01:00.0: bridge window [mem 0xdfb00000-0xdfbfffff] | |
| pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:00:01.0: PCI bridge to [bus 01-03] | |
| pci 0000:00:01.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfcfffff] | |
| pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:00:1b.0: PCI bridge to [bus 04] | |
| pci 0000:00:1b.0: bridge window [io 0x2000-0x2fff] | |
| pci 0000:00:1b.0: bridge window [mem 0x90000000-0x901fffff] | |
| pci 0000:00:1b.0: bridge window [mem 0x90200000-0x903fffff 64bit pref] | |
| pci 0000:00:1b.4: PCI bridge to [bus 05] | |
| pci 0000:00:1b.4: bridge window [mem 0xdfe00000-0xdfefffff] | |
| pci 0000:00:1c.0: PCI bridge to [bus 06] | |
| pci 0000:00:1c.4: PCI bridge to [bus 07] | |
| pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff] | |
| pci 0000:00:1d.0: PCI bridge to [bus 08] | |
| pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] | |
| pci 0000:00:1d.0: bridge window [mem 0x90400000-0x905fffff] | |
| pci 0000:00:1d.0: bridge window [mem 0x90600000-0x907fffff 64bit pref] | |
| pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] | |
| pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] | |
| pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] | |
| pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window] | |
| pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] | |
| pci_bus 0000:01: resource 0 [io 0xe000-0xefff] | |
| pci_bus 0000:01: resource 1 [mem 0xdfb00000-0xdfcfffff] | |
| pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci_bus 0000:02: resource 0 [io 0xe000-0xefff] | |
| pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfbfffff] | |
| pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci_bus 0000:03: resource 0 [io 0xe000-0xefff] | |
| pci_bus 0000:03: resource 1 [mem 0xdfb00000-0xdfbfffff] | |
| pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] | |
| pci_bus 0000:04: resource 1 [mem 0x90000000-0x901fffff] | |
| pci_bus 0000:04: resource 2 [mem 0x90200000-0x903fffff 64bit pref] | |
| pci_bus 0000:05: resource 1 [mem 0xdfe00000-0xdfefffff] | |
| pci_bus 0000:07: resource 1 [mem 0xdfd00000-0xdfdfffff] | |
| pci_bus 0000:08: resource 0 [io 0x3000-0x3fff] | |
| pci_bus 0000:08: resource 1 [mem 0x90400000-0x905fffff] | |
| pci_bus 0000:08: resource 2 [mem 0x90600000-0x907fffff 64bit pref] | |
| NET: Registered protocol family 2 | |
| tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear) | |
| TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) | |
| TCP: Hash tables configured (established 524288 bind 65536) | |
| UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
| UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
| NET: Registered protocol family 1 | |
| NET: Registered protocol family 44 | |
| pci 0000:03:00.0: disabling ATS | |
| pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] | |
| pci 0000:03:00.1: D0 power state depends on 0000:03:00.0 | |
| PCI: CLS 64 bytes, default 64 | |
| Trying to unpack rootfs image as initramfs... | |
| Freeing initrd memory: 35824K | |
| PCI-DMA: Using software bounce buffering for IO (SWIOTLB) | |
| software IO TLB: mapped [mem 0x83b7f000-0x87b7f000] (64MB) | |
| Initialise system trusted keyrings | |
| Key type blacklist registered | |
| workingset: timestamp_bits=36 max_order=24 bucket_order=0 | |
| zbud: loaded | |
| Platform Keyring initialized | |
| NET: Registered protocol family 38 | |
| Key type asymmetric registered | |
| Asymmetric key parser 'x509' registered | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) | |
| io scheduler mq-deadline registered | |
| io scheduler kyber registered | |
| io scheduler bfq registered | |
| atomic64_test: passed for x86-64 platform with CX8 and with SSE | |
| pcieport 0000:00:1b.4: AER: enabled with IRQ 122 | |
| pcieport 0000:00:1c.4: AER: enabled with IRQ 124 | |
| shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 | |
| efifb: probing for efifb | |
| efifb: Ignoring BGRT: unexpected or invalid BMP data | |
| efifb: framebuffer at 0xc0000000, using 3072k, total 3072k | |
| efifb: mode is 1024x768x32, linelength=4096, pages=1 | |
| efifb: scrolling: redraw | |
| efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 | |
| fbcon: Deferring console take-over | |
| fb0: EFI VGA frame buffer device | |
| intel_idle: MWAIT substates: 0x11142120 | |
| intel_idle: v0.4.1 model 0x9E | |
| intel_idle: lapic_timer_reliable_states 0xffffffff | |
| input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 | |
| ACPI: Sleep Button [SLPB] | |
| input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 | |
| ACPI: Power Button [PWRB] | |
| input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 | |
| ACPI: Power Button [PWRF] | |
| Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled | |
| 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A | |
| Non-volatile memory driver v1.3 | |
| Linux agpgart interface v0.103 | |
| ahci 0000:00:17.0: version 3.0 | |
| ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode | |
| ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst | |
| scsi host0: ahci | |
| scsi host1: ahci | |
| scsi host2: ahci | |
| scsi host3: ahci | |
| scsi host4: ahci | |
| scsi host5: ahci | |
| ata1: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b100 irq 128 | |
| ata2: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b180 irq 128 | |
| ata3: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b200 irq 128 | |
| ata4: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b280 irq 128 | |
| ata5: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b300 irq 128 | |
| ata6: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b380 irq 128 | |
| libphy: Fixed MDIO Bus: probed | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ehci-pci: EHCI PCI platform driver | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| ohci-pci: OHCI PCI platform driver | |
| uhci_hcd: USB Universal Host Controller Interface driver | |
| xhci_hcd 0000:00:14.0: xHCI Host Controller | |
| xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 | |
| xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 | |
| xhci_hcd 0000:00:14.0: cache line size of 64 is not supported | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: xHCI Host Controller | |
| usb usb1: Manufacturer: Linux 5.5.8-200.fc31.x86_64 xhci-hcd | |
| usb usb1: SerialNumber: 0000:00:14.0 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 16 ports detected | |
| xhci_hcd 0000:00:14.0: xHCI Host Controller | |
| xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 | |
| xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: xHCI Host Controller | |
| usb usb2: Manufacturer: Linux 5.5.8-200.fc31.x86_64 xhci-hcd | |
| usb usb2: SerialNumber: 0000:00:14.0 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 10 ports detected | |
| xhci_hcd 0000:07:00.0: xHCI Host Controller | |
| xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3 | |
| pcieport 0000:00:1c.4: AER: Corrected error received: 0000:00:1c.4 | |
| pcieport 0000:00:1c.4: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) | |
| pcieport 0000:00:1c.4: AER: device [8086:a294] error status/mask=00000001/00002000 | |
| pcieport 0000:00:1c.4: AER: [ 0] RxErr | |
| xhci_hcd 0000:07:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010 | |
| usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.05 | |
| usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb3: Product: xHCI Host Controller | |
| usb usb3: Manufacturer: Linux 5.5.8-200.fc31.x86_64 xhci-hcd | |
| usb usb3: SerialNumber: 0000:07:00.0 | |
| hub 3-0:1.0: USB hub found | |
| hub 3-0:1.0: 2 ports detected | |
| xhci_hcd 0000:07:00.0: xHCI Host Controller | |
| xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4 | |
| xhci_hcd 0000:07:00.0: Host supports USB 3.1 Enhanced SuperSpeed | |
| usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. | |
| usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.05 | |
| usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb4: Product: xHCI Host Controller | |
| usb usb4: Manufacturer: Linux 5.5.8-200.fc31.x86_64 xhci-hcd | |
| usb usb4: SerialNumber: 0000:07:00.0 | |
| hub 4-0:1.0: USB hub found | |
| hub 4-0:1.0: 2 ports detected | |
| usbcore: registered new interface driver usbserial_generic | |
| usbserial: USB Serial support registered for generic | |
| i8042: PNP: No PS/2 controller found. | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc_cmos 00:04: RTC can wake from S4 | |
| rtc_cmos 00:04: registered as rtc0 | |
| rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs | |
| device-mapper: uevent: version 1.0.3 | |
| device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: [email protected] | |
| intel_pstate: Intel P-state driver initializing | |
| intel_pstate: Disabling energy efficiency optimization | |
| intel_pstate: HWP enabled | |
| hid: raw HID events driver (C) Jiri Kosina | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:07 [mem 0xfdb00000-0xfdffffff] | |
| caller pmc_core_probe+0x7d/0x2d2 mapping multiple BARs | |
| intel_pmc_core INT33A1:00: initialized | |
| drop_monitor: Initializing network drop monitor service | |
| Initializing XFRM netlink socket | |
| NET: Registered protocol family 10 | |
| Segment Routing with IPv6 | |
| mip6: Mobile IPv6 | |
| NET: Registered protocol family 17 | |
| RAS: Correctable Errors collector initialized. | |
| microcode: sig=0x906ea, pf=0x2, revision=0x6e | |
| microcode: Microcode Update Driver: v2.2. | |
| IPI shorthand broadcast: enabled | |
| AVX2 version of gcm_enc/dec engaged. | |
| AES CTR mode by8 optimization enabled | |
| sched_clock: Marking stable (1132823498, 3306031)->(1139336295, -3206766) | |
| registered taskstats version 1 | |
| Loading compiled-in X.509 certificates | |
| Loaded X.509 cert 'Fedora kernel signing key: 73cfea3ecca7edc96e12dee9efb34993dcdf4baa' | |
| zswap: loaded using pool lzo/zbud | |
| Key type ._fscrypt registered | |
| Key type .fscrypt registered | |
| Key type big_key registered | |
| Key type encrypted registered | |
| integrity: Loading X.509 certificate: UEFI:db | |
| integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key Certificate: da83b990422ebc8c441f8d8b039a65a2' | |
| integrity: Loading X.509 certificate: UEFI:db | |
| integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key Certificate: b8e581e4df77a5bb4282d5ccfc00c071' | |
| integrity: Loading X.509 certificate: UEFI:db | |
| integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4' | |
| integrity: Loading X.509 certificate: UEFI:db | |
| integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 2011: a92902398e16c49778cd90f99e4f9ae17c55af53' | |
| integrity: Loading X.509 certificate: UEFI:db | |
| integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate Authority: ad91990bc22ab1f517048c23b6655a268e345a63' | |
| ima: No TPM chip found, activating TPM-bypass! | |
| ima: Allocated hash algorithm: sha256 | |
| ima: No architecture policies found | |
| PM: Magic number: 12:590:209 | |
| acpi device:60: hash matches | |
| rtc_cmos 00:04: setting system clock to 2020-03-15T03:14:50 UTC (1584242090) | |
| ata5: SATA link down (SStatus 4 SControl 300) | |
| ata6: SATA link down (SStatus 4 SControl 300) | |
| ata3: SATA link down (SStatus 4 SControl 300) | |
| ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) | |
| ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
| ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) | |
| ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata2.00: supports DRM functions and may not be fully accessible | |
| ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata4.00: ATAPI: HP DVD Writer 1260t, BH21, max UDMA/100 | |
| ata2.00: ATA-11: Samsung SSD 860 QVO 2TB, RVQ01B6Q, max UDMA/133 | |
| ata2.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA | |
| ata1.00: ATA-8: Hitachi HDS721064CLA332, JPGOA3GC, max UDMA/133 | |
| ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 32), AA | |
| ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata4.00: configured for UDMA/100 | |
| usb 1-1: new full-speed USB device number 2 using xhci_hcd | |
| ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata1.00: configured for UDMA/133 | |
| ata2.00: supports DRM functions and may not be fully accessible | |
| scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72106 A3GC PQ: 0 ANSI: 5 | |
| sd 0:0:0:0: Attached scsi generic sg0 type 0 | |
| sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) | |
| sd 0:0:0:0: [sda] Write Protect is off | |
| sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
| sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
| ata2.00: configured for UDMA/133 | |
| scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 | |
| ata2.00: Enabling discard_zeroes_data | |
| sd 1:0:0:0: Attached scsi generic sg1 type 0 | |
| sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) | |
| sd 1:0:0:0: [sdb] Write Protect is off | |
| sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 | |
| sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
| ata2.00: Enabling discard_zeroes_data | |
| scsi 3:0:0:0: CD-ROM HP DVD Writer 1260t BH21 PQ: 0 ANSI: 5 | |
| ata2.00: Enabling discard_zeroes_data | |
| sd 1:0:0:0: [sdb] supports TCG Opal | |
| sd 1:0:0:0: [sdb] Attached SCSI disk | |
| sda: sda1 sda2 sda3 | |
| sd 0:0:0:0: [sda] Attached SCSI disk | |
| sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray | |
| cdrom: Uniform CD-ROM driver Revision: 3.20 | |
| sr 3:0:0:0: Attached scsi CD-ROM sr0 | |
| sr 3:0:0:0: Attached scsi generic sg2 type 5 | |
| Freeing unused decrypted memory: 2040K | |
| Freeing unused kernel image (initmem) memory: 2556K | |
| Write protecting the kernel read-only data: 22528k | |
| Freeing unused kernel image (text/rodata gap) memory: 2044K | |
| Freeing unused kernel image (rodata/data gap) memory: 1168K | |
| x86/mm: Checked W+X mappings: passed, no W+X pages found. | |
| rodata_test: all tests were successful | |
| x86/mm: Checking user space page tables | |
| x86/mm: Checked W+X mappings: passed, no W+X pages found. | |
| Run /init as init process | |
| usb 1-1: New USB device found, idVendor=046d, idProduct=c537, bcdDevice=34.00 | |
| usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
| usb 1-1: Product: USB Receiver | |
| usb 1-1: Manufacturer: Logitech | |
| input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C537.0001/input/input3 | |
| hid-generic 0003:046D:C537.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0 | |
| systemd[1]: systemd v243.7-1.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) | |
| input: Logitech USB Receiver Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C537.0002/input/input4 | |
| systemd[1]: Detected architecture x86-64. | |
| systemd[1]: Running in initial RAM disk. | |
| systemd[1]: Set hostname to <storm>. | |
| input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C537.0002/input/input5 | |
| input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C537.0002/input/input6 | |
| input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C537.0002/input/input9 | |
| hid-generic 0003:046D:C537.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input1 | |
| systemd[1]: Created slice system-systemd\x2dhibernate\x2dresume.slice. | |
| systemd[1]: Reached target Slices. | |
| systemd[1]: Reached target Swap. | |
| systemd[1]: Reached target Timers. | |
| systemd[1]: Listening on Journal Audit Socket. | |
| systemd[1]: Listening on Journal Socket (/dev/log). | |
| fuse: init (API version 7.31) | |
| *** VALIDATE fuse *** | |
| *** VALIDATE fuse *** | |
| usb 1-2: new high-speed USB device number 3 using xhci_hcd | |
| audit: type=1130 audit(1584242091.112:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584242091.164:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584242091.230:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| usb 1-2: New USB device found, idVendor=046d, idProduct=081b, bcdDevice= 0.12 | |
| usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 | |
| usb 1-2: SerialNumber: 080F2E80 | |
| audit: type=1130 audit(1584242091.244:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=plymouth-start comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k | |
| e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode | |
| nvme nvme0: pci function 0000:05:00.0 | |
| usb 1-3: new high-speed USB device number 4 using xhci_hcd | |
| usb 1-3: New USB device found, idVendor=03f0, idProduct=7511, bcdDevice= 1.00 | |
| usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 1-3: Product: Photosmart C4700 series | |
| usb 1-3: Manufacturer: HP | |
| usb 1-3: SerialNumber: CN98CHB1M505CN | |
| tsc: Refined TSC clocksource calibration: 3695.999 MHz | |
| clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d2284b57, max_idle_ns: 881590451434 ns | |
| clocksource: Switched to clocksource tsc | |
| usb 1-4: new low-speed USB device number 5 using xhci_hcd | |
| e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock | |
| nvme nvme0: 7/0/0 default/read/poll queues | |
| nvme0n1: p1 p2 p3 p4 p5 | |
| e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) b0:6e:bf:cd:9f:19 | |
| e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection | |
| e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF | |
| e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 | |
| PM: Image not found (code -22) | |
| audit: type=1130 audit(1584242091.554:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-disk-by\x2duuid-b601758a\x2d19c6\x2d4dc7\x2dac67\x2dead9cacc7921 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584242091.554:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-hibernate-resume@dev-disk-by\x2duuid-b601758a\x2d19c6\x2d4dc7\x2dac67\x2dead9cacc7921 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584242091.564:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| usb 1-4: New USB device found, idVendor=046a, idProduct=0048, bcdDevice= 0.26 | |
| usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 1-4: Product: Das Keyboard | |
| input: Das Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046A:0048.0003/input/input10 | |
| hid-generic 0003:046A:0048.0003: input,hidraw2: USB HID v1.11 Keyboard [Das Keyboard] on usb-0000:00:14.0-4/input0 | |
| usb 1-9: new full-speed USB device number 6 using xhci_hcd | |
| usb 1-9: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 | |
| usb 1-9: New USB device strings: Mfr=0, Product=2, SerialNumber=0 | |
| usb 1-9: Product: CSR8510 A10 | |
| usb 1-10: new high-speed USB device number 7 using xhci_hcd | |
| usb 1-10: device descriptor read/8, error -110 | |
| usb 1-10: New USB device found, idVendor=154b, idProduct=00ee, bcdDevice= 1.00 | |
| usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 1-10: Product: USB 2.0 FD | |
| usb 1-10: Manufacturer: PNY | |
| usb 1-10: SerialNumber: 9000971DA32A3922 | |
| usb-storage 1-3:1.3: USB Mass Storage device detected | |
| scsi host6: usb-storage 1-3:1.3 | |
| usb-storage 1-10:1.0: USB Mass Storage device detected | |
| scsi host7: usb-storage 1-10:1.0 | |
| usbcore: registered new interface driver usb-storage | |
| usbcore: registered new interface driver uas | |
| audit: type=1130 audit(1584242097.520:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584242097.539:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| EXT4-fs (nvme0n1p4): mounted filesystem with ordered data mode. Opts: (null) | |
| audit: type=1130 audit(1584242097.629:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584242097.629:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=initrd-parse-etc comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584242097.649:13): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584242097.654:14): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-pivot comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584242097.655:15): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584242097.656:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584242097.656:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584242097.656:18): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| systemd-journald[348]: Received SIGTERM from PID 1 (systemd). | |
| printk: systemd: 23 output lines suppressed due to ratelimiting | |
| SELinux: Permission watch in class filesystem not defined in policy. | |
| SELinux: Permission watch in class file not defined in policy. | |
| SELinux: Permission watch_mount in class file not defined in policy. | |
| SELinux: Permission watch_sb in class file not defined in policy. | |
| SELinux: Permission watch_with_perm in class file not defined in policy. | |
| SELinux: Permission watch_reads in class file not defined in policy. | |
| SELinux: Permission watch in class dir not defined in policy. | |
| SELinux: Permission watch_mount in class dir not defined in policy. | |
| SELinux: Permission watch_sb in class dir not defined in policy. | |
| SELinux: Permission watch_with_perm in class dir not defined in policy. | |
| SELinux: Permission watch_reads in class dir not defined in policy. | |
| SELinux: Permission watch in class lnk_file not defined in policy. | |
| SELinux: Permission watch_mount in class lnk_file not defined in policy. | |
| SELinux: Permission watch_sb in class lnk_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class lnk_file not defined in policy. | |
| SELinux: Permission watch_reads in class lnk_file not defined in policy. | |
| SELinux: Permission watch in class chr_file not defined in policy. | |
| SELinux: Permission watch_mount in class chr_file not defined in policy. | |
| SELinux: Permission watch_sb in class chr_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class chr_file not defined in policy. | |
| SELinux: Permission watch_reads in class chr_file not defined in policy. | |
| SELinux: Permission watch in class blk_file not defined in policy. | |
| SELinux: Permission watch_mount in class blk_file not defined in policy. | |
| SELinux: Permission watch_sb in class blk_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class blk_file not defined in policy. | |
| SELinux: Permission watch_reads in class blk_file not defined in policy. | |
| SELinux: Permission watch in class sock_file not defined in policy. | |
| SELinux: Permission watch_mount in class sock_file not defined in policy. | |
| SELinux: Permission watch_sb in class sock_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class sock_file not defined in policy. | |
| SELinux: Permission watch_reads in class sock_file not defined in policy. | |
| SELinux: Permission watch in class fifo_file not defined in policy. | |
| SELinux: Permission watch_mount in class fifo_file not defined in policy. | |
| SELinux: Permission watch_sb in class fifo_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class fifo_file not defined in policy. | |
| SELinux: Permission watch_reads in class fifo_file not defined in policy. | |
| SELinux: Class perf_event not defined in policy. | |
| SELinux: the above unknown classes and permissions will be allowed | |
| SELinux: policy capability network_peer_controls=1 | |
| SELinux: policy capability open_perms=1 | |
| SELinux: policy capability extended_socket_class=1 | |
| SELinux: policy capability always_check_network=0 | |
| SELinux: policy capability cgroup_seclabel=1 | |
| SELinux: policy capability nnp_nosuid_transition=1 | |
| systemd[1]: Successfully loaded SELinux policy in 364.859ms. | |
| systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 23.461ms. | |
| systemd[1]: systemd v243.7-1.fc31 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) | |
| systemd[1]: Detected architecture x86-64. | |
| systemd[1]: Set hostname to <storm>. | |
| systemd[1]: /usr/lib/systemd/system/iscsid.service:11: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsid.pid → /run/iscsid.pid; please update the unit file accordingly. | |
| systemd[1]: /usr/lib/systemd/system/iscsiuio.service:13: PIDFile= references a path below legacy directory /var/run/, updating /var/run/iscsiuio.pid → /run/iscsiuio.pid; please update the unit file accordingly. | |
| systemd[1]: /usr/lib/systemd/system/libvirtd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-admin-sock → /run/libvirt/libvirt-admin-sock; please update the unit file accordingly. | |
| systemd[1]: /usr/lib/systemd/system/libvirtd-ro.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock-ro → /run/libvirt/libvirt-sock-ro; please update the unit file accordingly. | |
| systemd[1]: /usr/lib/systemd/system/libvirtd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/libvirt-sock → /run/libvirt/libvirt-sock; please update the unit file accordingly. | |
| systemd[1]: /usr/lib/systemd/system/virtlockd.socket:6: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-sock → /run/libvirt/virtlockd-sock; please update the unit file accordingly. | |
| systemd[1]: /usr/lib/systemd/system/virtlockd-admin.socket:8: ListenStream= references a path below legacy directory /var/run/, updating /var/run/libvirt/virtlockd-admin-sock → /run/libvirt/virtlockd-admin-sock; please update the unit file accordingly. | |
| vboxdrv: loading out-of-tree module taints kernel. | |
| vboxdrv: module verification failed: signature and/or required key missing - tainting kernel | |
| EXT4-fs (nvme0n1p4): re-mounted. Opts: (null) | |
| vboxdrv: Found 12 processor cores | |
| Adding 33012732k swap on /dev/nvme0n1p3. Priority:-2 extents:1 across:33012732k SSFS | |
| vboxdrv: TSC mode is Invariant, tentative frequency 3695998450 Hz | |
| vboxdrv: Successfully loaded version 6.1.4_RPMFusion (interface 0x002d0001) | |
| VBoxNetFlt: Successfully started. | |
| VBoxNetAdp: Successfully started. | |
| scsi 6:0:0:0: Direct-Access HP Photosmart C4700 1.00 PQ: 0 ANSI: 5 | |
| sd 6:0:0:0: Attached scsi generic sg3 type 0 | |
| sd 6:0:0:0: [sdc] Attached SCSI removable disk | |
| systemd-journald[605]: Received client request to flush runtime journal. | |
| EDAC ie31200: No ECC support | |
| mei_me 0000:00:16.0: enabling device (0000 -> 0002) | |
| i801_smbus 0000:00:1f.4: SPD Write Disable is set | |
| i801_smbus 0000:00:1f.4: SMBus using PCI interrupt | |
| mc: Linux media interface: v0.10 | |
| input: PC Speaker as /devices/platform/pcspkr/input/input11 | |
| asus_wmi: ASUS WMI generic driver loaded | |
| asus_wmi: Initialization: 0x0 | |
| asus_wmi: BIOS WMI version: 0.9 | |
| asus_wmi: SFUN value: 0x0 | |
| eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS | |
| input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12 | |
| videodev: Linux video capture interface: v2.00 | |
| RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer | |
| RAPL PMU: hw unit of domain pp0-core 2^-14 Joules | |
| RAPL PMU: hw unit of domain package 2^-14 Joules | |
| RAPL PMU: hw unit of domain dram 2^-14 Joules | |
| Bluetooth: Core ver 2.22 | |
| NET: Registered protocol family 31 | |
| Bluetooth: HCI device and connection manager initialized | |
| Bluetooth: HCI socket layer initialized | |
| Bluetooth: L2CAP socket layer initialized | |
| Bluetooth: SCO socket layer initialized | |
| snd_hda_intel 0000:03:00.1: Force to non-snoop mode | |
| usbcore: registered new interface driver btusb | |
| input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input13 | |
| input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input14 | |
| input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input15 | |
| input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input16 | |
| input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input17 | |
| input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input18 | |
| snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line | |
| snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) | |
| snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) | |
| snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 | |
| snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 | |
| snd_hda_codec_realtek hdaudioC1D0: inputs: | |
| snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 | |
| snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 | |
| snd_hda_codec_realtek hdaudioC1D0: Line=0x1a | |
| input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input19 | |
| input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input20 | |
| input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card1/input21 | |
| input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card1/input22 | |
| input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card1/input23 | |
| input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card1/input24 | |
| input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card1/input25 | |
| iTCO_vendor_support: vendor-support=0 | |
| iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 | |
| iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) | |
| iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) | |
| WARNING! power/level is deprecated; use power/control instead | |
| usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7511 | |
| usbcore: registered new interface driver usblp | |
| intel_rapl_common: Found RAPL domain package | |
| intel_rapl_common: Found RAPL domain core | |
| intel_rapl_common: Found RAPL domain dram | |
| scsi 7:0:0:0: Direct-Access PNY USB 2.0 FD PMAP PQ: 0 ANSI: 6 | |
| sd 7:0:0:0: Attached scsi generic sg4 type 0 | |
| sd 7:0:0:0: [sdd] 60628992 512-byte logical blocks: (31.0 GB/28.9 GiB) | |
| sd 7:0:0:0: [sdd] Write Protect is off | |
| sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00 | |
| sd 7:0:0:0: [sdd] No Caching mode page found | |
| sd 7:0:0:0: [sdd] Assuming drive cache: write through | |
| sdd: sdd1 sdd2 sdd3 | |
| sd 7:0:0:0: [sdd] Attached SCSI removable disk | |
| usb 1-2: set resolution quirk: cval->res = 384 | |
| usbcore: registered new interface driver snd-usb-audio | |
| uvcvideo: Found UVC 1.00 device <unnamed> (046d:081b) | |
| uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Extension 6 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Extension 7 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Extension 3 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized! | |
| input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input26 | |
| usbcore: registered new interface driver uvcvideo | |
| USB Video Class driver (1.1.1) | |
| ata2.00: Enabling discard_zeroes_data | |
| EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null) | |
| EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null) | |
| EXT4-fs (sdb): mounted filesystem with ordered data mode. Opts: (null) | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
| Bluetooth: BNEP filters: protocol multicast | |
| Bluetooth: BNEP socket layer initialized | |
| usblp0: removed | |
| usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7511 | |
| e1000e: enp0s31f6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx | |
| IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready | |
| FS-Cache: Loaded | |
| Key type dns_resolver registered | |
| FS-Cache: Netfs 'cifs' registered for caching | |
| Key type cifs.spnego registered | |
| Key type cifs.idmap registered | |
| CIFS: Attempting to mount //192.168.1.150/patocarr | |
| No dialect specified on mount. Default has changed to a more secure dialect, SMB2.1 or later (e.g. SMB3), from CIFS (SMB1). To use the less secure SMB1 dialect to access old servers which do not support SMB3 (or SMB2.1) specify vers=1.0 on mount. | |
| bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. | |
| tun: Universal TUN/TAP device driver, 1.6 | |
| virbr0: port 1(virbr0-nic) entered blocking state | |
| virbr0: port 1(virbr0-nic) entered disabled state | |
| device virbr0-nic entered promiscuous mode | |
| virbr0: port 1(virbr0-nic) entered blocking state | |
| virbr0: port 1(virbr0-nic) entered listening state | |
| virbr0: port 1(virbr0-nic) entered disabled state | |
| Bluetooth: RFCOMM TTY layer initialized | |
| Bluetooth: RFCOMM socket layer initialized | |
| Bluetooth: RFCOMM ver 1.11 | |
| L1TF CPU bug present and SMT on, data leak possible. See CVE-2018-3646 and https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/l1tf.html for details. | |
| fbcon: Taking over console | |
| Console: switching to colour frame buffer device 128x48 | |
| usb 1-2: reset high-speed USB device number 3 using xhci_hcd | |
| rfkill: input handler disabled | |
| rfkill: input handler enabled | |
| ISO 9660 Extensions: Microsoft Joliet Level 3 | |
| ISO 9660 Extensions: Microsoft Joliet Level 3 | |
| ISO 9660 Extensions: RRIP_1991A | |
| rfkill: input handler disabled |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Fedora 32 Live Workstation booting the latest kernel | |
| AMD GTX 5500 XT Graphics card loads fine, acceleration enabled, using amdgpu driver with firmware error message. | |
| Linux version 5.6.0-0.rc5.git0.2.fc32.x86_64 ([email protected]) (gcc version 10.0.1 20200216 (Red Hat 10.0.1-0.8) (GCC)) #1 SMP Tue Mar 10 19:09:42 UTC 2020 | |
| Command line: BOOT_IMAGE=vmlinuz initrd=initrd.img root=live:CDLABEL=Fedora-WS-Live-32-20200314-n-0 rd.live.image quiet | |
| x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' | |
| x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' | |
| x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' | |
| x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' | |
| x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' | |
| x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 | |
| x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 | |
| x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 | |
| x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format. | |
| BIOS-provided physical RAM map: | |
| BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable | |
| BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved | |
| BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved | |
| BIOS-e820: [mem 0x0000000000100000-0x000000007f9cdfff] usable | |
| BIOS-e820: [mem 0x000000007f9ce000-0x000000007f9cefff] ACPI NVS | |
| BIOS-e820: [mem 0x000000007f9cf000-0x000000007f9cffff] reserved | |
| BIOS-e820: [mem 0x000000007f9d0000-0x000000008c655fff] usable | |
| BIOS-e820: [mem 0x000000008c656000-0x000000008df11fff] reserved | |
| BIOS-e820: [mem 0x000000008df12000-0x000000008df6bfff] ACPI data | |
| BIOS-e820: [mem 0x000000008df6c000-0x000000008e35dfff] ACPI NVS | |
| BIOS-e820: [mem 0x000000008e35e000-0x000000008f7a1fff] reserved | |
| BIOS-e820: [mem 0x000000008f7a2000-0x000000008f7fffff] usable | |
| BIOS-e820: [mem 0x000000008f800000-0x000000008fffffff] reserved | |
| BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved | |
| BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved | |
| BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved | |
| BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved | |
| BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved | |
| BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved | |
| BIOS-e820: [mem 0x0000000100000000-0x000000106effffff] usable | |
| NX (Execute Disable) protection: active | |
| SMBIOS 3.0.0 present. | |
| DMI: System manufacturer System Product Name/TUF Z370-PRO GAMING, BIOS 0215 09/05/2017 | |
| tsc: Detected 3700.000 MHz processor | |
| tsc: Detected 3699.850 MHz TSC | |
| e820: update [mem 0x00000000-0x00000fff] usable ==> reserved | |
| e820: remove [mem 0x000a0000-0x000fffff] usable | |
| last_pfn = 0x106f000 max_arch_pfn = 0x400000000 | |
| MTRR default type: write-back | |
| MTRR fixed ranges enabled: | |
| 00000-9FFFF write-back | |
| A0000-BFFFF uncachable | |
| C0000-FFFFF write-protect | |
| MTRR variable ranges enabled: | |
| 0 base 00C0000000 mask 7FC0000000 uncachable | |
| 1 base 00A0000000 mask 7FE0000000 uncachable | |
| 2 base 0090000000 mask 7FF0000000 uncachable | |
| 3 disabled | |
| 4 disabled | |
| 5 disabled | |
| 6 disabled | |
| 7 disabled | |
| 8 disabled | |
| 9 disabled | |
| x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT | |
| last_pfn = 0x8f800 max_arch_pfn = 0x400000000 | |
| found SMP MP-table at [mem 0x000fce00-0x000fce0f] | |
| Using GB pages for direct mapping | |
| BRK [0x497801000, 0x497801fff] PGTABLE | |
| BRK [0x497802000, 0x497802fff] PGTABLE | |
| BRK [0x497803000, 0x497803fff] PGTABLE | |
| BRK [0x497804000, 0x497804fff] PGTABLE | |
| BRK [0x497805000, 0x497805fff] PGTABLE | |
| BRK [0x497806000, 0x497806fff] PGTABLE | |
| BRK [0x497807000, 0x497807fff] PGTABLE | |
| BRK [0x497808000, 0x497808fff] PGTABLE | |
| BRK [0x497809000, 0x497809fff] PGTABLE | |
| BRK [0x49780a000, 0x49780afff] PGTABLE | |
| BRK [0x49780b000, 0x49780bfff] PGTABLE | |
| RAMDISK: [mem 0x7c233000-0x7f9cdfff] | |
| ACPI: Early table checksum verification disabled | |
| ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA) | |
| ACPI: XSDT 0x000000008DF350A8 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: FACP 0x000000008DF5F338 000114 (v06 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: DSDT 0x000000008DF35200 02A132 (v02 ALASKA A M I 01072009 INTL 20160422) | |
| ACPI: FACS 0x000000008E35DF00 000040 | |
| ACPI: APIC 0x000000008DF5F450 0000F4 (v03 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: FPDT 0x000000008DF5F548 000044 (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: FIDT 0x000000008DF5F590 00009C (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: WSMT 0x000000008DF6AF58 000028 (v01 ALASKA A M I 01072009 AMI 00010013) | |
| ACPI: MCFG 0x000000008DF5F688 00003C (v01 ALASKA A M I 01072009 MSFT 00000097) | |
| ACPI: SSDT 0x000000008DF5F6C8 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF5FA70 003156 (v02 SaSsdt SaSsdt 00003000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF62BC8 002611 (v02 PegSsd PegSsdt 00001000 INTL 20160422) | |
| ACPI: HPET 0x000000008DF651E0 000038 (v01 INTEL KBL 00000001 MSFT 0000005F) | |
| ACPI: SSDT 0x000000008DF65218 000B13 (v02 INTEL xh_rvp08 00000000 INTL 20160422) | |
| ACPI: UEFI 0x000000008DF65D30 000042 (v01 ALASKA A M I 00000002 01000013) | |
| ACPI: SSDT 0x000000008DF65D78 0017AE (v02 CpuRef CpuSsdt 00003000 INTL 20160422) | |
| ACPI: LPIT 0x000000008DF67528 000094 (v01 INTEL KBL 00000000 MSFT 0000005F) | |
| ACPI: SSDT 0x000000008DF675C0 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF67708 00029F (v02 INTEL sensrhub 00000000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF679A8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422) | |
| ACPI: SSDT 0x000000008DF6A9B0 000517 (v02 INTEL TbtTypeC 00000000 INTL 20160422) | |
| ACPI: DBGP 0x000000008DF6AEC8 000034 (v01 INTEL 00000002 MSFT 0000005F) | |
| ACPI: DBG2 0x000000008DF6AF00 000054 (v00 INTEL 00000002 MSFT 0000005F) | |
| ACPI: Local APIC address 0xfee00000 | |
| No NUMA configuration found | |
| Faking a node at [mem 0x0000000000000000-0x000000106effffff] | |
| NODE_DATA(0) allocated [mem 0x106efd5000-0x106effffff] | |
| Zone ranges: | |
| DMA [mem 0x0000000000001000-0x0000000000ffffff] | |
| DMA32 [mem 0x0000000001000000-0x00000000ffffffff] | |
| Normal [mem 0x0000000100000000-0x000000106effffff] | |
| Device empty | |
| Movable zone start for each node | |
| Early memory node ranges | |
| node 0: [mem 0x0000000000001000-0x000000000009bfff] | |
| node 0: [mem 0x0000000000100000-0x000000007f9cdfff] | |
| node 0: [mem 0x000000007f9d0000-0x000000008c655fff] | |
| node 0: [mem 0x000000008f7a2000-0x000000008f7fffff] | |
| node 0: [mem 0x0000000100000000-0x000000106effffff] | |
| Zeroed struct page in unavailable ranges: 18867 pages | |
| Initmem setup node 0 [mem 0x0000000000001000-0x000000106effffff] | |
| On node 0 totalpages: 16758349 | |
| DMA zone: 64 pages used for memmap | |
| DMA zone: 21 pages reserved | |
| DMA zone: 3995 pages, LIFO batch:0 | |
| DMA32 zone: 8923 pages used for memmap | |
| DMA32 zone: 571058 pages, LIFO batch:63 | |
| Normal zone: 252864 pages used for memmap | |
| Normal zone: 16183296 pages, LIFO batch:63 | |
| ACPI: PM-Timer IO Port: 0x1808 | |
| ACPI: Local APIC address 0xfee00000 | |
| ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) | |
| ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) | |
| IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) | |
| ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) | |
| ACPI: IRQ0 used by override. | |
| ACPI: IRQ9 used by override. | |
| Using ACPI (MADT) for SMP configuration information | |
| ACPI: HPET id: 0x8086a201 base: 0xfed00000 | |
| smpboot: Allowing 12 CPUs, 0 hotplug CPUs | |
| PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] | |
| PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x0009cfff] | |
| PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009ffff] | |
| PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] | |
| PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] | |
| PM: hibernation: Registered nosave memory: [mem 0x7f9ce000-0x7f9cefff] | |
| PM: hibernation: Registered nosave memory: [mem 0x7f9cf000-0x7f9cffff] | |
| PM: hibernation: Registered nosave memory: [mem 0x8c656000-0x8df11fff] | |
| PM: hibernation: Registered nosave memory: [mem 0x8df12000-0x8df6bfff] | |
| PM: hibernation: Registered nosave memory: [mem 0x8df6c000-0x8e35dfff] | |
| PM: hibernation: Registered nosave memory: [mem 0x8e35e000-0x8f7a1fff] | |
| PM: hibernation: Registered nosave memory: [mem 0x8f800000-0x8fffffff] | |
| PM: hibernation: Registered nosave memory: [mem 0x90000000-0xdfffffff] | |
| PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] | |
| PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfdffffff] | |
| PM: hibernation: Registered nosave memory: [mem 0xfe000000-0xfe010fff] | |
| PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xfebfffff] | |
| PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] | |
| PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfecfffff] | |
| PM: hibernation: Registered nosave memory: [mem 0xfed00000-0xfed00fff] | |
| PM: hibernation: Registered nosave memory: [mem 0xfed01000-0xfedfffff] | |
| PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] | |
| PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xfeffffff] | |
| PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff] | |
| [mem 0x90000000-0xdfffffff] available for PCI devices | |
| Booting paravirtualized kernel on bare hardware | |
| clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns | |
| setup_percpu: NR_CPUS:8192 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1 | |
| percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 | |
| pcpu-alloc: s188416 r8192 d28672 u262144 alloc=1*2097152 | |
| pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- | |
| Built 1 zonelists, mobility grouping on. Total pages: 16496477 | |
| Policy zone: Normal | |
| Kernel command line: BOOT_IMAGE=vmlinuz initrd=initrd.img root=live:CDLABEL=Fedora-WS-Live-32-20200314-n-0 rd.live.image quiet | |
| Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear) | |
| Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) | |
| mem auto-init: stack:off, heap alloc:off, heap free:off | |
| Memory: 65719656K/67033396K available (14339K kernel code, 2400K rwdata, 4884K rodata, 2444K init, 6156K bss, 1313740K reserved, 0K cma-reserved) | |
| SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1 | |
| Kernel/User page tables isolation: enabled | |
| ftrace: allocating 40680 entries in 159 pages | |
| ftrace: allocated 159 pages with 6 groups | |
| rcu: Hierarchical RCU implementation. | |
| rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=12. | |
| Tasks RCU enabled. | |
| rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. | |
| rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12 | |
| NR_IRQS: 524544, nr_irqs: 2152, preallocated irqs: 16 | |
| random: crng done (trusting CPU's manufacturer) | |
| Console: colour VGA+ 80x25 | |
| printk: console [tty0] enabled | |
| ACPI: Core revision 20200110 | |
| clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns | |
| APIC: Switch to symmetric I/O mode setup | |
| x2apic: IRQ remapping doesn't support X2APIC mode | |
| Switched APIC routing to physical flat. | |
| ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 | |
| clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa99074b1c, max_idle_ns: 881590506587 ns | |
| Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.70 BogoMIPS (lpj=3699850) | |
| pid_max: default: 32768 minimum: 301 | |
| LSM: Security Framework initializing | |
| Yama: becoming mindful. | |
| SELinux: Initializing. | |
| *** VALIDATE selinux *** | |
| Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| *** VALIDATE tmpfs *** | |
| *** VALIDATE proc *** | |
| *** VALIDATE cgroup *** | |
| *** VALIDATE cgroup2 *** | |
| mce: CPU0: Thermal monitoring enabled (TM1) | |
| process: using mwait in idle threads | |
| Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 | |
| Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 | |
| Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization | |
| Spectre V2 : Mitigation: Full generic retpoline | |
| Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch | |
| Speculative Store Bypass: Vulnerable | |
| TAA: Vulnerable: Clear CPU buffers attempted, no microcode | |
| MDS: Vulnerable: Clear CPU buffers attempted, no microcode | |
| Freeing SMP alternatives memory: 36K | |
| TSC deadline timer enabled | |
| smpboot: CPU0: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xa) | |
| Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. | |
| ... version: 4 | |
| ... bit width: 48 | |
| ... generic registers: 4 | |
| ... value mask: 0000ffffffffffff | |
| ... max period: 00007fffffffffff | |
| ... fixed-purpose events: 3 | |
| ... event mask: 000000070000000f | |
| rcu: Hierarchical SRCU implementation. | |
| NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. | |
| smp: Bringing up secondary CPUs ... | |
| x86: Booting SMP configuration: | |
| .... node #0, CPUs: #1 #2 #3 #4 #5 #6 | |
| MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. | |
| TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. | |
| #7 #8 #9 #10 #11 | |
| smp: Brought up 1 node, 12 CPUs | |
| smpboot: Max logical packages: 1 | |
| smpboot: Total of 12 processors activated (88796.40 BogoMIPS) | |
| devtmpfs: initialized | |
| x86/mm: Memory block size: 128MB | |
| PM: Registering ACPI NVS region [mem 0x7f9ce000-0x7f9cefff] (4096 bytes) | |
| PM: Registering ACPI NVS region [mem 0x8df6c000-0x8e35dfff] (4136960 bytes) | |
| clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns | |
| futex hash table entries: 4096 (order: 6, 262144 bytes, linear) | |
| pinctrl core: initialized pinctrl subsystem | |
| PM: RTC time: 03:38:44, date: 2020-03-15 | |
| thermal_sys: Registered thermal governor 'fair_share' | |
| thermal_sys: Registered thermal governor 'bang_bang' | |
| thermal_sys: Registered thermal governor 'step_wise' | |
| thermal_sys: Registered thermal governor 'user_space' | |
| NET: Registered protocol family 16 | |
| audit: initializing netlink subsys (disabled) | |
| audit: type=2000 audit(1584243524.025:1): state=initialized audit_enabled=0 res=1 | |
| cpuidle: using governor menu | |
| ACPI FADT declares the system doesn't support PCIe ASPM, so disable it | |
| ACPI: bus type PCI registered | |
| acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 | |
| PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) | |
| PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 | |
| PCI: Using configuration type 1 for base access | |
| ENERGY_PERF_BIAS: Set to 'normal', was 'performance' | |
| HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages | |
| HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages | |
| cryptd: max_cpu_qlen set to 1000 | |
| alg: No test for 842 (842-generic) | |
| alg: No test for 842 (842-scomp) | |
| ACPI: Added _OSI(Module Device) | |
| ACPI: Added _OSI(Processor Device) | |
| ACPI: Added _OSI(3.0 _SCP Extensions) | |
| ACPI: Added _OSI(Processor Aggregator Device) | |
| ACPI: Added _OSI(Linux-Dell-Video) | |
| ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) | |
| ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) | |
| ACPI: 10 ACPI AML tables successfully acquired and loaded | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF8F8C27A9A800 00077A (v02 PmRef Cpu0Ist 00003000 INTL 20160422) | |
| ACPI: \_PR_.PR00: _OSC native thermal LVT Acked | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF8F8C2713A000 0003FF (v02 PmRef Cpu0Cst 00003001 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF8F8C27A843C0 0000BA (v02 PmRef Cpu0Hwp 00003000 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF8F8C27A9B000 000628 (v02 PmRef HwpLvt 00003000 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF8F8C27129000 000D14 (v02 PmRef ApIst 00003000 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF8F8C2713C800 000317 (v02 PmRef ApHwp 00003000 INTL 20160422) | |
| ACPI: Dynamic OEM Table Load: | |
| ACPI: SSDT 0xFFFF8F8C27139400 00030A (v02 PmRef ApCst 00003000 INTL 20160422) | |
| ACPI: Interpreter enabled | |
| ACPI: (supports S0 S3 S4 S5) | |
| ACPI: Using IOAPIC for interrupt routing | |
| PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug | |
| ACPI: Enabled 9 GPEs in block 00 to 7F | |
| ACPI: Power Resource [PG00] (on) | |
| ACPI: Power Resource [PG01] (on) | |
| ACPI: Power Resource [PG02] (on) | |
| ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) | |
| acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] | |
| acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME] | |
| acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR] | |
| acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration | |
| PCI host bridge to bus 0000:00 | |
| pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] | |
| pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] | |
| pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] | |
| pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window] | |
| pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] | |
| pci_bus 0000:00: root bus resource [bus 00-fe] | |
| pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000 | |
| pci 0000:00:01.0: [8086:1901] type 01 class 0x060400 | |
| pci 0000:00:01.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330 | |
| pci 0000:00:14.0: reg 0x10: [mem 0xdff30000-0xdff3ffff 64bit] | |
| pci 0000:00:14.0: PME# supported from D3hot D3cold | |
| pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000 | |
| pci 0000:00:16.0: reg 0x10: [mem 0xdff4d000-0xdff4dfff 64bit] | |
| pci 0000:00:16.0: PME# supported from D3hot | |
| pci 0000:00:17.0: [8086:a282] type 00 class 0x010601 | |
| pci 0000:00:17.0: reg 0x10: [mem 0xdff48000-0xdff49fff] | |
| pci 0000:00:17.0: reg 0x14: [mem 0xdff4c000-0xdff4c0ff] | |
| pci 0000:00:17.0: reg 0x18: [io 0xf050-0xf057] | |
| pci 0000:00:17.0: reg 0x1c: [io 0xf040-0xf043] | |
| pci 0000:00:17.0: reg 0x20: [io 0xf020-0xf03f] | |
| pci 0000:00:17.0: reg 0x24: [mem 0xdff4b000-0xdff4b7ff] | |
| pci 0000:00:17.0: PME# supported from D3hot | |
| pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400 | |
| pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1b.4: [8086:a2eb] type 01 class 0x060400 | |
| pci 0000:00:1b.4: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400 | |
| pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400 | |
| pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400 | |
| pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:00:1f.0: [8086:a2c9] type 00 class 0x060100 | |
| pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000 | |
| pci 0000:00:1f.2: reg 0x10: [mem 0xdff44000-0xdff47fff] | |
| pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300 | |
| pci 0000:00:1f.3: reg 0x10: [mem 0xdff40000-0xdff43fff 64bit] | |
| pci 0000:00:1f.3: reg 0x20: [mem 0xdff20000-0xdff2ffff 64bit] | |
| pci 0000:00:1f.3: PME# supported from D3hot D3cold | |
| pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500 | |
| pci 0000:00:1f.4: reg 0x10: [mem 0xdff4a000-0xdff4a0ff 64bit] | |
| pci 0000:00:1f.4: reg 0x20: [io 0xf000-0xf01f] | |
| pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000 | |
| pci 0000:00:1f.6: reg 0x10: [mem 0xdff00000-0xdff1ffff] | |
| pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold | |
| pci 0000:01:00.0: [1002:1478] type 01 class 0x060400 | |
| pci 0000:01:00.0: reg 0x10: [mem 0xdfc00000-0xdfc03fff] | |
| pci 0000:01:00.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:01:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 126.024 Gb/s with 16 GT/s x8 link) | |
| pci 0000:00:01.0: PCI bridge to [bus 01-03] | |
| pci 0000:00:01.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfcfffff] | |
| pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:02:00.0: [1002:1479] type 01 class 0x060400 | |
| pci 0000:02:00.0: PME# supported from D0 D3hot D3cold | |
| pci 0000:01:00.0: PCI bridge to [bus 02-03] | |
| pci 0000:01:00.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:01:00.0: bridge window [mem 0xdfb00000-0xdfbfffff] | |
| pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:03:00.0: [1002:7340] type 00 class 0x030000 | |
| pci 0000:03:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] | |
| pci 0000:03:00.0: reg 0x18: [mem 0xd0000000-0xd01fffff 64bit pref] | |
| pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe0ff] | |
| pci 0000:03:00.0: reg 0x24: [mem 0xdfb00000-0xdfb7ffff] | |
| pci 0000:03:00.0: reg 0x30: [mem 0xdfb80000-0xdfb9ffff pref] | |
| pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold | |
| pci 0000:03:00.0: 63.008 Gb/s available PCIe bandwidth, limited by 8 GT/s x8 link at 0000:00:01.0 (capable of 252.048 Gb/s with 16 GT/s x16 link) | |
| pci 0000:03:00.1: [1002:ab38] type 00 class 0x040300 | |
| pci 0000:03:00.1: reg 0x10: [mem 0xdfba0000-0xdfba3fff] | |
| pci 0000:03:00.1: PME# supported from D1 D2 D3hot D3cold | |
| pci 0000:02:00.0: PCI bridge to [bus 03] | |
| pci 0000:02:00.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:02:00.0: bridge window [mem 0xdfb00000-0xdfbfffff] | |
| pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:00:1b.0: PCI bridge to [bus 04] | |
| pci 0000:05:00.0: [144d:a804] type 00 class 0x010802 | |
| pci 0000:05:00.0: reg 0x10: [mem 0xdfe00000-0xdfe03fff 64bit] | |
| pci 0000:00:1b.4: PCI bridge to [bus 05] | |
| pci 0000:00:1b.4: bridge window [mem 0xdfe00000-0xdfefffff] | |
| pci 0000:00:1c.0: PCI bridge to [bus 06] | |
| pci 0000:07:00.0: [1b21:2142] type 00 class 0x0c0330 | |
| pci 0000:07:00.0: reg 0x10: [mem 0xdfd00000-0xdfd07fff 64bit] | |
| pci 0000:07:00.0: enabling Extended Tags | |
| pci 0000:07:00.0: PME# supported from D0 | |
| pci 0000:00:1c.4: PCI bridge to [bus 07] | |
| pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff] | |
| pci 0000:00:1d.0: PCI bridge to [bus 08] | |
| ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) | |
| iommu: Default domain type: Translated | |
| pci 0000:03:00.0: vgaarb: setting as boot VGA device | |
| pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none | |
| pci 0000:03:00.0: vgaarb: bridge control possible | |
| vgaarb: loaded | |
| SCSI subsystem initialized | |
| libata version 3.00 loaded. | |
| ACPI: bus type USB registered | |
| usbcore: registered new interface driver usbfs | |
| usbcore: registered new interface driver hub | |
| usbcore: registered new device driver usb | |
| pps_core: LinuxPPS API ver. 1 registered | |
| pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]> | |
| PTP clock support registered | |
| EDAC MC: Ver: 3.0.0 | |
| PCI: Using ACPI for IRQ routing | |
| PCI: pci_cache_line_size set to 64 bytes | |
| e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff] | |
| e820: reserve RAM buffer [mem 0x7f9ce000-0x7fffffff] | |
| e820: reserve RAM buffer [mem 0x8c656000-0x8fffffff] | |
| e820: reserve RAM buffer [mem 0x8f800000-0x8fffffff] | |
| e820: reserve RAM buffer [mem 0x106f000000-0x106fffffff] | |
| NetLabel: Initializing | |
| NetLabel: domain hash size = 128 | |
| NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
| NetLabel: unlabeled traffic allowed by default | |
| hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 | |
| hpet0: 8 comparators, 64-bit 24.000000 MHz counter | |
| clocksource: Switched to clocksource tsc-early | |
| *** VALIDATE bpf *** | |
| VFS: Disk quotas dquot_6.6.0 | |
| VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| *** VALIDATE ramfs *** | |
| *** VALIDATE hugetlbfs *** | |
| pnp: PnP ACPI init | |
| system 00:00: [io 0x0290-0x029f] has been reserved | |
| system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp 00:01: [dma 0 disabled] | |
| pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active) | |
| system 00:02: [io 0x0680-0x069f] has been reserved | |
| system 00:02: [io 0xffff] has been reserved | |
| system 00:02: [io 0xffff] has been reserved | |
| system 00:02: [io 0xffff] has been reserved | |
| system 00:02: [io 0x1800-0x18fe] has been reserved | |
| system 00:02: [io 0x164e-0x164f] has been reserved | |
| system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| system 00:03: [io 0x0800-0x087f] has been reserved | |
| system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) | |
| system 00:05: [io 0x1854-0x1857] has been reserved | |
| system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) | |
| system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved | |
| system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved | |
| system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved | |
| system 00:06: [mem 0xe0000000-0xefffffff] has been reserved | |
| system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved | |
| system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved | |
| system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved | |
| system 00:06: [mem 0xff000000-0xffffffff] has been reserved | |
| system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved | |
| system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved | |
| system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved | |
| system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved | |
| system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved | |
| system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved | |
| system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved | |
| system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved | |
| system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved | |
| system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved | |
| system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved | |
| system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved | |
| system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| system 00:08: [io 0xff00-0xfffe] has been reserved | |
| system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved | |
| system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved | |
| system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved | |
| system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) | |
| pnp: PnP ACPI: found 10 devices | |
| clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns | |
| pci 0000:00:1b.0: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000 | |
| pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000 | |
| pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000 | |
| pci 0000:00:1d.0: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000 | |
| pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000 add_align 100000 | |
| pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 08] add_size 200000 add_align 100000 | |
| pci 0000:00:1b.0: BAR 14: assigned [mem 0x90000000-0x901fffff] | |
| pci 0000:00:1b.0: BAR 15: assigned [mem 0x90200000-0x903fffff 64bit pref] | |
| pci 0000:00:1d.0: BAR 14: assigned [mem 0x90400000-0x905fffff] | |
| pci 0000:00:1d.0: BAR 15: assigned [mem 0x90600000-0x907fffff 64bit pref] | |
| pci 0000:00:1b.0: BAR 13: assigned [io 0x2000-0x2fff] | |
| pci 0000:00:1d.0: BAR 13: assigned [io 0x3000-0x3fff] | |
| pci 0000:02:00.0: PCI bridge to [bus 03] | |
| pci 0000:02:00.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:02:00.0: bridge window [mem 0xdfb00000-0xdfbfffff] | |
| pci 0000:02:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:01:00.0: PCI bridge to [bus 02-03] | |
| pci 0000:01:00.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:01:00.0: bridge window [mem 0xdfb00000-0xdfbfffff] | |
| pci 0000:01:00.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:00:01.0: PCI bridge to [bus 01-03] | |
| pci 0000:00:01.0: bridge window [io 0xe000-0xefff] | |
| pci 0000:00:01.0: bridge window [mem 0xdfb00000-0xdfcfffff] | |
| pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci 0000:00:1b.0: PCI bridge to [bus 04] | |
| pci 0000:00:1b.0: bridge window [io 0x2000-0x2fff] | |
| pci 0000:00:1b.0: bridge window [mem 0x90000000-0x901fffff] | |
| pci 0000:00:1b.0: bridge window [mem 0x90200000-0x903fffff 64bit pref] | |
| pci 0000:00:1b.4: PCI bridge to [bus 05] | |
| pci 0000:00:1b.4: bridge window [mem 0xdfe00000-0xdfefffff] | |
| pci 0000:00:1c.0: PCI bridge to [bus 06] | |
| pci 0000:00:1c.4: PCI bridge to [bus 07] | |
| pci 0000:00:1c.4: bridge window [mem 0xdfd00000-0xdfdfffff] | |
| pci 0000:00:1d.0: PCI bridge to [bus 08] | |
| pci 0000:00:1d.0: bridge window [io 0x3000-0x3fff] | |
| pci 0000:00:1d.0: bridge window [mem 0x90400000-0x905fffff] | |
| pci 0000:00:1d.0: bridge window [mem 0x90600000-0x907fffff 64bit pref] | |
| pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] | |
| pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] | |
| pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] | |
| pci_bus 0000:00: resource 7 [mem 0x90000000-0xdfffffff window] | |
| pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window] | |
| pci_bus 0000:01: resource 0 [io 0xe000-0xefff] | |
| pci_bus 0000:01: resource 1 [mem 0xdfb00000-0xdfcfffff] | |
| pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci_bus 0000:02: resource 0 [io 0xe000-0xefff] | |
| pci_bus 0000:02: resource 1 [mem 0xdfb00000-0xdfbfffff] | |
| pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci_bus 0000:03: resource 0 [io 0xe000-0xefff] | |
| pci_bus 0000:03: resource 1 [mem 0xdfb00000-0xdfbfffff] | |
| pci_bus 0000:03: resource 2 [mem 0xc0000000-0xd01fffff 64bit pref] | |
| pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] | |
| pci_bus 0000:04: resource 1 [mem 0x90000000-0x901fffff] | |
| pci_bus 0000:04: resource 2 [mem 0x90200000-0x903fffff 64bit pref] | |
| pci_bus 0000:05: resource 1 [mem 0xdfe00000-0xdfefffff] | |
| pci_bus 0000:07: resource 1 [mem 0xdfd00000-0xdfdfffff] | |
| pci_bus 0000:08: resource 0 [io 0x3000-0x3fff] | |
| pci_bus 0000:08: resource 1 [mem 0x90400000-0x905fffff] | |
| pci_bus 0000:08: resource 2 [mem 0x90600000-0x907fffff 64bit pref] | |
| NET: Registered protocol family 2 | |
| tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear) | |
| TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) | |
| TCP: Hash tables configured (established 524288 bind 65536) | |
| UDP hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
| UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
| NET: Registered protocol family 1 | |
| NET: Registered protocol family 44 | |
| pci 0000:03:00.0: disabling ATS | |
| pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] | |
| pci 0000:03:00.1: D0 power state depends on 0000:03:00.0 | |
| PCI: CLS 64 bytes, default 64 | |
| Trying to unpack rootfs image as initramfs... | |
| Freeing initrd memory: 56940K | |
| PCI-DMA: Using software bounce buffering for IO (SWIOTLB) | |
| software IO TLB: mapped [mem 0x88656000-0x8c656000] (64MB) | |
| Initialise system trusted keyrings | |
| Key type blacklist registered | |
| workingset: timestamp_bits=36 max_order=24 bucket_order=0 | |
| zbud: loaded | |
| Platform Keyring initialized | |
| NET: Registered protocol family 38 | |
| Key type asymmetric registered | |
| Asymmetric key parser 'x509' registered | |
| Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) | |
| io scheduler mq-deadline registered | |
| io scheduler kyber registered | |
| io scheduler bfq registered | |
| atomic64_test: passed for x86-64 platform with CX8 and with SSE | |
| pcieport 0000:00:1b.4: AER: enabled with IRQ 122 | |
| pcieport 0000:00:1c.4: AER: enabled with IRQ 124 | |
| shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 | |
| intel_idle: MWAIT substates: 0x11142120 | |
| intel_idle: v0.4.1 model 0x9E | |
| intel_idle: lapic_timer_reliable_states 0xffffffff | |
| input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 | |
| ACPI: Sleep Button [SLPB] | |
| input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 | |
| ACPI: Power Button [PWRB] | |
| input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 | |
| ACPI: Power Button [PWRF] | |
| Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled | |
| 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A | |
| Non-volatile memory driver v1.3 | |
| Linux agpgart interface v0.103 | |
| ahci 0000:00:17.0: version 3.0 | |
| ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode | |
| ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst | |
| scsi host0: ahci | |
| scsi host1: ahci | |
| scsi host2: ahci | |
| scsi host3: ahci | |
| scsi host4: ahci | |
| scsi host5: ahci | |
| ata1: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b100 irq 128 | |
| ata2: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b180 irq 128 | |
| ata3: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b200 irq 128 | |
| ata4: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b280 irq 128 | |
| ata5: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b300 irq 128 | |
| ata6: SATA max UDMA/133 abar m2048@0xdff4b000 port 0xdff4b380 irq 128 | |
| libphy: Fixed MDIO Bus: probed | |
| ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| ehci-pci: EHCI PCI platform driver | |
| ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver | |
| ohci-pci: OHCI PCI platform driver | |
| uhci_hcd: USB Universal Host Controller Interface driver | |
| xhci_hcd 0000:00:14.0: xHCI Host Controller | |
| xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 | |
| xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 | |
| xhci_hcd 0000:00:14.0: cache line size of 64 is not supported | |
| usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06 | |
| usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb1: Product: xHCI Host Controller | |
| usb usb1: Manufacturer: Linux 5.6.0-0.rc5.git0.2.fc32.x86_64 xhci-hcd | |
| usb usb1: SerialNumber: 0000:00:14.0 | |
| hub 1-0:1.0: USB hub found | |
| hub 1-0:1.0: 16 ports detected | |
| xhci_hcd 0000:00:14.0: xHCI Host Controller | |
| xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 | |
| xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed | |
| usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06 | |
| usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb2: Product: xHCI Host Controller | |
| usb usb2: Manufacturer: Linux 5.6.0-0.rc5.git0.2.fc32.x86_64 xhci-hcd | |
| usb usb2: SerialNumber: 0000:00:14.0 | |
| hub 2-0:1.0: USB hub found | |
| hub 2-0:1.0: 10 ports detected | |
| xhci_hcd 0000:07:00.0: xHCI Host Controller | |
| xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3 | |
| pcieport 0000:00:1c.4: AER: Corrected error received: 0000:00:1c.4 | |
| pcieport 0000:00:1c.4: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID) | |
| pcieport 0000:00:1c.4: AER: device [8086:a294] error status/mask=00000001/00002000 | |
| pcieport 0000:00:1c.4: AER: [ 0] RxErr | |
| xhci_hcd 0000:07:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010 | |
| usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06 | |
| usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb3: Product: xHCI Host Controller | |
| usb usb3: Manufacturer: Linux 5.6.0-0.rc5.git0.2.fc32.x86_64 xhci-hcd | |
| usb usb3: SerialNumber: 0000:07:00.0 | |
| hub 3-0:1.0: USB hub found | |
| hub 3-0:1.0: 2 ports detected | |
| xhci_hcd 0000:07:00.0: xHCI Host Controller | |
| xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4 | |
| xhci_hcd 0000:07:00.0: Host supports USB 3.1 Enhanced SuperSpeed | |
| usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. | |
| usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06 | |
| usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
| usb usb4: Product: xHCI Host Controller | |
| usb usb4: Manufacturer: Linux 5.6.0-0.rc5.git0.2.fc32.x86_64 xhci-hcd | |
| usb usb4: SerialNumber: 0000:07:00.0 | |
| hub 4-0:1.0: USB hub found | |
| hub 4-0:1.0: 2 ports detected | |
| usbcore: registered new interface driver usbserial_generic | |
| usbserial: USB Serial support registered for generic | |
| i8042: PNP: No PS/2 controller found. | |
| mousedev: PS/2 mouse device common for all mice | |
| rtc_cmos 00:04: RTC can wake from S4 | |
| rtc_cmos 00:04: registered as rtc0 | |
| rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs | |
| device-mapper: uevent: version 1.0.3 | |
| device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: [email protected] | |
| intel_pstate: Intel P-state driver initializing | |
| intel_pstate: Disabling energy efficiency optimization | |
| intel_pstate: HWP enabled | |
| hid: raw HID events driver (C) Jiri Kosina | |
| usbcore: registered new interface driver usbhid | |
| usbhid: USB HID core driver | |
| resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:07 [mem 0xfdb00000-0xfdffffff] | |
| caller pmc_core_probe+0x6d/0x2c0 mapping multiple BARs | |
| intel_pmc_core INT33A1:00: initialized | |
| drop_monitor: Initializing network drop monitor service | |
| Initializing XFRM netlink socket | |
| NET: Registered protocol family 10 | |
| Segment Routing with IPv6 | |
| mip6: Mobile IPv6 | |
| NET: Registered protocol family 17 | |
| RAS: Correctable Errors collector initialized. | |
| microcode: sig=0x906ea, pf=0x2, revision=0x6e | |
| microcode: Microcode Update Driver: v2.2. | |
| IPI shorthand broadcast: enabled | |
| AVX2 version of gcm_enc/dec engaged. | |
| AES CTR mode by8 optimization enabled | |
| sched_clock: Marking stable (3369496826, 5668160)->(3379673207, -4508221) | |
| registered taskstats version 1 | |
| Loading compiled-in X.509 certificates | |
| Loaded X.509 cert 'Fedora kernel signing key: 6261d58eb9a96e25b7d1ad8ac9faa512d892154d' | |
| zswap: loaded using pool lzo/zbud | |
| Key type ._fscrypt registered | |
| Key type .fscrypt registered | |
| Key type fscrypt-provisioning registered | |
| Key type big_key registered | |
| Key type encrypted registered | |
| ima: No TPM chip found, activating TPM-bypass! | |
| ima: Allocated hash algorithm: sha256 | |
| ima: No architecture policies found | |
| PM: Magic number: 12:5:614 | |
| acpi PNP0303:00: hash matches | |
| rtc_cmos 00:04: setting system clock to 2020-03-15T03:38:47 UTC (1584243527) | |
| ata5: SATA link down (SStatus 4 SControl 300) | |
| ata6: SATA link down (SStatus 4 SControl 300) | |
| ata3: SATA link down (SStatus 4 SControl 300) | |
| ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) | |
| ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) | |
| ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata4.00: ATAPI: HP DVD Writer 1260t, BH21, max UDMA/100 | |
| ata1.00: ATA-8: Hitachi HDS721064CLA332, JPGOA3GC, max UDMA/133 | |
| ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 32), AA | |
| ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata4.00: configured for UDMA/100 | |
| ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
| ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata1.00: configured for UDMA/133 | |
| ata2.00: supports DRM functions and may not be fully accessible | |
| scsi 0:0:0:0: Direct-Access ATA Hitachi HDS72106 A3GC PQ: 0 ANSI: 5 | |
| ata2.00: ATA-11: Samsung SSD 860 QVO 2TB, RVQ01B6Q, max UDMA/133 | |
| ata2.00: 3907029168 sectors, multi 1: LBA48 NCQ (depth 32), AA | |
| sd 0:0:0:0: Attached scsi generic sg0 type 0 | |
| sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB) | |
| sd 0:0:0:0: [sda] Write Protect is off | |
| sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 | |
| sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
| ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded | |
| ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out | |
| ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out | |
| ata2.00: supports DRM functions and may not be fully accessible | |
| ata2.00: configured for UDMA/133 | |
| scsi 1:0:0:0: Direct-Access ATA Samsung SSD 860 1B6Q PQ: 0 ANSI: 5 | |
| ata2.00: Enabling discard_zeroes_data | |
| sd 1:0:0:0: Attached scsi generic sg1 type 0 | |
| sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) | |
| sd 1:0:0:0: [sdb] Write Protect is off | |
| sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 | |
| sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
| sda: sda1 sda2 sda3 | |
| ata2.00: Enabling discard_zeroes_data | |
| sd 0:0:0:0: [sda] Attached SCSI disk | |
| ata2.00: Enabling discard_zeroes_data | |
| usb 1-1: new full-speed USB device number 2 using xhci_hcd | |
| sd 1:0:0:0: [sdb] supports TCG Opal | |
| sd 1:0:0:0: [sdb] Attached SCSI disk | |
| scsi 3:0:0:0: CD-ROM HP DVD Writer 1260t BH21 PQ: 0 ANSI: 5 | |
| sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray | |
| cdrom: Uniform CD-ROM driver Revision: 3.20 | |
| sr 3:0:0:0: Attached scsi CD-ROM sr0 | |
| sr 3:0:0:0: Attached scsi generic sg2 type 5 | |
| Freeing unused decrypted memory: 2040K | |
| Freeing unused kernel image (initmem) memory: 2444K | |
| Write protecting the kernel read-only data: 22528k | |
| Freeing unused kernel image (text/rodata gap) memory: 2044K | |
| Freeing unused kernel image (rodata/data gap) memory: 1260K | |
| x86/mm: Checked W+X mappings: passed, no W+X pages found. | |
| rodata_test: all tests were successful | |
| x86/mm: Checking user space page tables | |
| usb 1-1: New USB device found, idVendor=046d, idProduct=c537, bcdDevice=34.00 | |
| usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
| usb 1-1: Product: USB Receiver | |
| usb 1-1: Manufacturer: Logitech | |
| input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:046D:C537.0001/input/input3 | |
| hid-generic 0003:046D:C537.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0 | |
| input: Logitech USB Receiver Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C537.0002/input/input4 | |
| x86/mm: Checked W+X mappings: passed, no W+X pages found. | |
| Run /init as init process | |
| with arguments: | |
| /init | |
| with environment: | |
| HOME=/ | |
| TERM=linux | |
| BOOT_IMAGE=vmlinuz | |
| systemd[1]: systemd v245~rc1-4.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) | |
| systemd[1]: Detected architecture x86-64. | |
| systemd[1]: Running in initial RAM disk. | |
| systemd[1]: No hostname configured. | |
| systemd[1]: Set hostname to <localhost>. | |
| systemd[1]: Initializing machine ID from random generator. | |
| systemd[1]: initrd.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail). | |
| systemd[1]: local-fs.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail). | |
| input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C537.0002/input/input5 | |
| input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C537.0002/input/input6 | |
| input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:046D:C537.0002/input/input9 | |
| systemd[1]: initrd-fs.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail). | |
| systemd[1]: initrd-root-device.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail). | |
| systemd[1]: initrd-root-fs.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail). | |
| hid-generic 0003:046D:C537.0002: input,hiddev96,hidraw1: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-1/input1 | |
| systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| systemd[1]: Reached target Local Encrypted Volumes. | |
| systemd[1]: Reached target Initrd Root Device. | |
| systemd[1]: Reached target Paths. | |
| systemd[1]: Reached target Slices. | |
| systemd[1]: Reached target Swap. | |
| systemd[1]: Reached target Timers. | |
| systemd[1]: Listening on Journal Audit Socket. | |
| systemd[1]: Listening on Journal Socket (/dev/log). | |
| systemd[1]: Listening on Journal Socket. | |
| systemd[1]: Listening on udev Control Socket. | |
| systemd[1]: Listening on udev Kernel Socket. | |
| systemd[1]: Starting Create list of static device nodes for the current kernel... | |
| systemd[1]: Starting Journal Service... | |
| systemd[1]: Starting Load Kernel Modules... | |
| systemd[1]: Starting Setup Virtual Console... | |
| systemd[1]: Started Create list of static device nodes for the current kernel. | |
| systemd[1]: Starting Create Static Device Nodes in /dev... | |
| systemd[1]: Started Create Static Device Nodes in /dev. | |
| systemd[1]: systemd-vconsole-setup.service: Succeeded. | |
| systemd[1]: Started Setup Virtual Console. | |
| systemd[1]: Condition check resulted in dracut ask for additional cmdline parameters being skipped. | |
| systemd[1]: Starting dracut cmdline hook... | |
| fuse: init (API version 7.31) | |
| *** VALIDATE fuseblk *** | |
| *** VALIDATE fuse *** | |
| systemd[1]: Started Load Kernel Modules. | |
| systemd[1]: Starting Apply Kernel Variables... | |
| systemd[1]: Started Apply Kernel Variables. | |
| loop: module loaded | |
| Loading iSCSI transport class v2.0-870. | |
| iscsi: registered transport (tcp) | |
| iscsi: registered transport (qla4xxx) | |
| QLogic iSCSI HBA Driver | |
| libcxgbi:libcxgbi_init_module: Chelsio iSCSI driver library libcxgbi v0.9.1-ko (Apr. 2015) | |
| usb 1-2: new high-speed USB device number 3 using xhci_hcd | |
| Chelsio T3 iSCSI Driver cxgb3i v2.0.1-ko (Apr. 2015) | |
| iscsi: registered transport (cxgb3i) | |
| Chelsio T4-T6 iSCSI Driver cxgb4i v0.9.5-ko (Apr. 2015) | |
| iscsi: registered transport (cxgb4i) | |
| cxgb4i:cxgb4i_init_module: cxgb4i dcb enabled. | |
| cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) | |
| QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014) | |
| iscsi: registered transport (bnx2i) | |
| iscsi: registered transport (be2iscsi) | |
| In beiscsi_module_init, tt=000000006dcff59a | |
| systemd[1]: Started dracut cmdline hook. | |
| systemd[1]: Starting dracut pre-udev hook... | |
| RPC: Registered named UNIX socket transport module. | |
| RPC: Registered udp transport module. | |
| RPC: Registered tcp transport module. | |
| RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| systemd[1]: Started Journal Service. | |
| audit: type=1130 audit(1584243528.087:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584243528.123:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1334 audit(1584243528.123:4): prog-id=6 op=LOAD | |
| audit: type=1334 audit(1584243528.123:5): prog-id=7 op=LOAD | |
| usb 1-2: New USB device found, idVendor=046d, idProduct=081b, bcdDevice= 0.12 | |
| usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=2 | |
| usb 1-2: SerialNumber: 080F2E80 | |
| audit: type=1130 audit(1584243528.289:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584243528.333:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| usb 1-3: new high-speed USB device number 4 using xhci_hcd | |
| tsc: Refined TSC clocksource calibration: 3696.011 MHz | |
| clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d3b76e56, max_idle_ns: 881590545799 ns | |
| clocksource: Switched to clocksource tsc | |
| usb 1-3: New USB device found, idVendor=03f0, idProduct=7511, bcdDevice= 1.00 | |
| usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 1-3: Product: Photosmart C4700 series | |
| usb 1-3: Manufacturer: HP | |
| usb 1-3: SerialNumber: CN98CHB1M505CN | |
| usb-storage 1-3:1.3: USB Mass Storage device detected | |
| scsi host6: usb-storage 1-3:1.3 | |
| usbcore: registered new interface driver usb-storage | |
| usbcore: registered new interface driver uas | |
| audit: type=1130 audit(1584243528.405:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k | |
| e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode | |
| nvme nvme0: pci function 0000:05:00.0 | |
| usb 1-4: new low-speed USB device number 5 using xhci_hcd | |
| usb 1-4: New USB device found, idVendor=046a, idProduct=0048, bcdDevice= 0.26 | |
| usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 | |
| usb 1-4: Product: Das Keyboard | |
| input: Das Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/0003:046A:0048.0003/input/input10 | |
| nvme nvme0: 7/0/0 default/read/poll queues | |
| e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock | |
| hid-generic 0003:046A:0048.0003: input,hidraw2: USB HID v1.11 Keyboard [Das Keyboard] on usb-0000:00:14.0-4/input0 | |
| nvme0n1: p1 p2 p3 p4 p5 | |
| e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) b0:6e:bf:cd:9f:19 | |
| e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection | |
| e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF | |
| e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0 | |
| 8021q: 802.1Q VLAN Support v1.8 | |
| usb 1-9: new full-speed USB device number 6 using xhci_hcd | |
| usb 1-9: New USB device found, idVendor=0a12, idProduct=0001, bcdDevice=88.91 | |
| usb 1-9: New USB device strings: Mfr=0, Product=2, SerialNumber=0 | |
| usb 1-9: Product: CSR8510 A10 | |
| usb 1-10: new high-speed USB device number 7 using xhci_hcd | |
| scsi 6:0:0:0: Direct-Access HP Photosmart C4700 1.00 PQ: 0 ANSI: 5 | |
| sd 6:0:0:0: Attached scsi generic sg3 type 0 | |
| sd 6:0:0:0: [sdc] Attached SCSI removable disk | |
| usb 1-10: device descriptor read/8, error -110 | |
| usb 1-10: New USB device found, idVendor=154b, idProduct=00ee, bcdDevice= 1.00 | |
| usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
| usb 1-10: Product: USB 2.0 FD | |
| usb 1-10: Manufacturer: PNY | |
| usb 1-10: SerialNumber: 9000971DA32A3922 | |
| usb-storage 1-10:1.0: USB Mass Storage device detected | |
| scsi host7: usb-storage 1-10:1.0 | |
| audit: type=1130 audit(1584243534.254:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584243534.258:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=multipathd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| scsi 7:0:0:0: Direct-Access PNY USB 2.0 FD PMAP PQ: 0 ANSI: 6 | |
| sd 7:0:0:0: Attached scsi generic sg4 type 0 | |
| sd 7:0:0:0: [sdd] 60628992 512-byte logical blocks: (31.0 GB/28.9 GiB) | |
| sd 7:0:0:0: [sdd] Write Protect is off | |
| sd 7:0:0:0: [sdd] Mode Sense: 23 00 00 00 | |
| sd 7:0:0:0: [sdd] No Caching mode page found | |
| sd 7:0:0:0: [sdd] Assuming drive cache: write through | |
| sdd: sdd1 sdd2 sdd3 | |
| sd 7:0:0:0: [sdd] Attached SCSI removable disk | |
| e1000e 0000:00:1f.6 enp0s31f6: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx | |
| IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready | |
| squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| ISO 9660 Extensions: Microsoft Joliet Level 3 | |
| ISO 9660 Extensions: RRIP_1991A | |
| audit: type=1130 audit(1584243540.227:11): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584243540.244:12): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-mount comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null) | |
| audit: type=1334 audit(1584243540.292:13): prog-id=7 op=UNLOAD | |
| audit: type=1334 audit(1584243540.292:14): prog-id=6 op=UNLOAD | |
| audit: type=1334 audit(1584243540.292:15): prog-id=5 op=UNLOAD | |
| audit: type=1334 audit(1584243540.292:16): prog-id=4 op=UNLOAD | |
| audit: type=1334 audit(1584243540.292:17): prog-id=3 op=UNLOAD | |
| audit: type=1334 audit(1584243540.397:18): prog-id=8 op=LOAD | |
| audit: type=1334 audit(1584243540.397:19): prog-id=9 op=LOAD | |
| audit: type=1334 audit(1584243540.397:20): prog-id=10 op=LOAD | |
| systemd-journald[381]: Received SIGTERM from PID 1 (systemd). | |
| SELinux: Permission watch in class filesystem not defined in policy. | |
| SELinux: Permission watch in class file not defined in policy. | |
| SELinux: Permission watch_mount in class file not defined in policy. | |
| SELinux: Permission watch_sb in class file not defined in policy. | |
| SELinux: Permission watch_with_perm in class file not defined in policy. | |
| SELinux: Permission watch_reads in class file not defined in policy. | |
| SELinux: Permission watch in class dir not defined in policy. | |
| SELinux: Permission watch_mount in class dir not defined in policy. | |
| SELinux: Permission watch_sb in class dir not defined in policy. | |
| SELinux: Permission watch_with_perm in class dir not defined in policy. | |
| SELinux: Permission watch_reads in class dir not defined in policy. | |
| SELinux: Permission watch in class lnk_file not defined in policy. | |
| SELinux: Permission watch_mount in class lnk_file not defined in policy. | |
| SELinux: Permission watch_sb in class lnk_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class lnk_file not defined in policy. | |
| SELinux: Permission watch_reads in class lnk_file not defined in policy. | |
| SELinux: Permission watch in class chr_file not defined in policy. | |
| SELinux: Permission watch_mount in class chr_file not defined in policy. | |
| SELinux: Permission watch_sb in class chr_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class chr_file not defined in policy. | |
| SELinux: Permission watch_reads in class chr_file not defined in policy. | |
| SELinux: Permission watch in class blk_file not defined in policy. | |
| SELinux: Permission watch_mount in class blk_file not defined in policy. | |
| SELinux: Permission watch_sb in class blk_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class blk_file not defined in policy. | |
| SELinux: Permission watch_reads in class blk_file not defined in policy. | |
| SELinux: Permission watch in class sock_file not defined in policy. | |
| SELinux: Permission watch_mount in class sock_file not defined in policy. | |
| SELinux: Permission watch_sb in class sock_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class sock_file not defined in policy. | |
| SELinux: Permission watch_reads in class sock_file not defined in policy. | |
| SELinux: Permission watch in class fifo_file not defined in policy. | |
| SELinux: Permission watch_mount in class fifo_file not defined in policy. | |
| SELinux: Permission watch_sb in class fifo_file not defined in policy. | |
| SELinux: Permission watch_with_perm in class fifo_file not defined in policy. | |
| SELinux: Permission watch_reads in class fifo_file not defined in policy. | |
| SELinux: Class perf_event not defined in policy. | |
| SELinux: Class lockdown not defined in policy. | |
| SELinux: the above unknown classes and permissions will be allowed | |
| SELinux: policy capability network_peer_controls=1 | |
| SELinux: policy capability open_perms=1 | |
| SELinux: policy capability extended_socket_class=1 | |
| SELinux: policy capability always_check_network=0 | |
| SELinux: policy capability cgroup_seclabel=1 | |
| SELinux: policy capability nnp_nosuid_transition=1 | |
| systemd[1]: Successfully loaded SELinux policy in 467.672ms. | |
| systemd[1]: RTC configured in localtime, applying delta of -240 minutes to system time. | |
| systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 24.409ms. | |
| systemd[1]: systemd v245~rc1-4.fc32 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) | |
| systemd[1]: Detected architecture x86-64. | |
| systemd[1]: Initializing machine ID from random generator. | |
| systemd[1]: initrd-root-fs.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail). | |
| systemd[1]: initrd.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail). | |
| systemd[1]: /usr/lib/systemd/system/sssd.service:12: PIDFile= references a path below legacy directory /var/run/, updating /var/run/sssd.pid → /run/sssd.pid; please update the unit file accordingly. | |
| systemd[1]: initrd-root-device.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail). | |
| systemd[1]: initrd-fs.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail). | |
| systemd[1]: local-fs.target: Requested dependency OnFailure=emergency.target ignored (target units cannot fail). | |
| systemd[1]: /usr/lib/systemd/system/sssd-kcm.socket:7: ListenStream= references a path below legacy directory /var/run/, updating /var/run/.heim_org.h5l.kcm-socket → /run/.heim_org.h5l.kcm-socket; please update the unit file accordingly. | |
| systemd[1]: initrd-switch-root.service: Succeeded. | |
| systemd[1]: Stopped Switch Root. | |
| systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. | |
| systemd[1]: Created slice Virtual Machine and Container Slice. | |
| systemd[1]: Created slice system-getty.slice. | |
| systemd[1]: Created slice system-modprobe.slice. | |
| systemd[1]: Created slice User and Session Slice. | |
| systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
| systemd[1]: Reached target Login Prompts. | |
| systemd[1]: Stopped target Switch Root. | |
| systemd[1]: Stopped target Initrd File Systems. | |
| systemd[1]: Stopped target Initrd Root File System. | |
| systemd[1]: Reached target rpc_pipefs.target. | |
| systemd[1]: Reached target Slices. | |
| systemd[1]: Reached target Swap. | |
| systemd[1]: Listening on Device-mapper event daemon FIFOs. | |
| systemd[1]: Listening on LVM2 poll daemon socket. | |
| systemd[1]: Listening on multipathd control socket. | |
| systemd[1]: Listening on Process Core Dump Socket. | |
| systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| systemd[1]: Listening on udev Control Socket. | |
| systemd[1]: Listening on udev Kernel Socket. | |
| systemd[1]: Listening on User Database Manager Socket. | |
| systemd[1]: Mounting Huge Pages File System... | |
| systemd[1]: Mounting POSIX Message Queue File System... | |
| systemd[1]: Mounting Kernel Debug File System... | |
| systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. | |
| systemd[1]: Mounting Temporary Directory (/tmp)... | |
| systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. | |
| systemd[1]: Starting Create list of static device nodes for the current kernel... | |
| systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... | |
| systemd[1]: Starting Load Kernel Module drm... | |
| systemd[1]: Starting Preprocess NFS configuration convertion... | |
| systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. | |
| systemd[1]: Stopped Journal Service. | |
| systemd[1]: Starting Journal Service... | |
| systemd[1]: Starting Load Kernel Modules... | |
| systemd[1]: Starting Remount Root and Kernel File Systems... | |
| systemd[1]: Starting Repartition Root Disk... | |
| systemd[1]: Starting udev Coldplug all Devices... | |
| systemd[1]: Starting Setup Virtual Console... | |
| systemd[1]: sysroot-var-lib-nfs-rpc_pipefs.mount: Succeeded. | |
| systemd[1]: sysroot.mount: Succeeded. | |
| systemd[1]: Mounted Huge Pages File System. | |
| systemd[1]: Mounted POSIX Message Queue File System. | |
| systemd[1]: Mounted Kernel Debug File System. | |
| systemd[1]: Mounted Temporary Directory (/tmp). | |
| systemd[1]: Started Create list of static device nodes for the current kernel. | |
| systemd[1]: nfs-convert.service: Succeeded. | |
| systemd[1]: Started Preprocess NFS configuration convertion. | |
| systemd[1]: Started Remount Root and Kernel File Systems. | |
| systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped. | |
| systemd[1]: Condition check resulted in First Boot Wizard being skipped. | |
| systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. | |
| systemd[1]: Starting Load/Save Random Seed... | |
| systemd[1]: Condition check resulted in Create System Users being skipped. | |
| systemd[1]: Starting Create Static Device Nodes in /dev... | |
| systemd[1]: [email protected]: Succeeded. | |
| systemd[1]: Started Load Kernel Module drm. | |
| systemd[1]: Started Load Kernel Modules. | |
| systemd[1]: Mounting FUSE Control File System... | |
| systemd[1]: Starting Apply Kernel Variables... | |
| systemd[1]: Mounted FUSE Control File System. | |
| systemd[1]: Started Load/Save Random Seed. | |
| systemd[1]: Started Apply Kernel Variables. | |
| systemd[1]: Started Repartition Root Disk. | |
| systemd[1]: Started Journal Service. | |
| systemd-journald[1042]: Received client request to flush runtime journal. | |
| input: PC Speaker as /devices/platform/pcspkr/input/input11 | |
| EDAC ie31200: No ECC support | |
| i801_smbus 0000:00:1f.4: SPD Write Disable is set | |
| i801_smbus 0000:00:1f.4: SMBus using PCI interrupt | |
| mei_me 0000:00:16.0: enabling device (0000 -> 0002) | |
| asus_wmi: ASUS WMI generic driver loaded | |
| RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer | |
| RAPL PMU: hw unit of domain pp0-core 2^-14 Joules | |
| RAPL PMU: hw unit of domain package 2^-14 Joules | |
| RAPL PMU: hw unit of domain dram 2^-14 Joules | |
| asus_wmi: Initialization: 0x0 | |
| asus_wmi: BIOS WMI version: 0.9 | |
| asus_wmi: SFUN value: 0x0 | |
| eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS | |
| input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input12 | |
| mc: Linux media interface: v0.10 | |
| Bluetooth: Core ver 2.22 | |
| NET: Registered protocol family 31 | |
| Bluetooth: HCI device and connection manager initialized | |
| Bluetooth: HCI socket layer initialized | |
| Bluetooth: L2CAP socket layer initialized | |
| Bluetooth: SCO socket layer initialized | |
| iTCO_vendor_support: vendor-support=0 | |
| AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <[email protected]> | |
| AMD-Vi: AMD IOMMUv2 functionality not available on this system | |
| iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 | |
| iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400) | |
| iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) | |
| videodev: Linux video capture interface: v2.00 | |
| usbcore: registered new interface driver btusb | |
| snd_hda_intel 0000:03:00.1: Force to non-snoop mode | |
| input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input13 | |
| input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input14 | |
| input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input15 | |
| input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input16 | |
| input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input17 | |
| input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:01.0/0000:01:00.0/0000:02:00.0/0000:03:00.1/sound/card2/input18 | |
| snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC887-VD: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line | |
| snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) | |
| snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) | |
| snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 | |
| snd_hda_codec_realtek hdaudioC1D0: dig-out=0x11/0x0 | |
| snd_hda_codec_realtek hdaudioC1D0: inputs: | |
| snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 | |
| snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 | |
| snd_hda_codec_realtek hdaudioC1D0: Line=0x1a | |
| input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input19 | |
| input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card1/input20 | |
| input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card1/input21 | |
| input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card1/input22 | |
| input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card1/input23 | |
| input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card1/input24 | |
| input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card1/input25 | |
| [drm] amdgpu kernel modesetting enabled. | |
| CRAT table not found | |
| Virtual CRAT table created for CPU | |
| Parsing CRAT table with 1 nodes | |
| Creating topology SYSFS entries | |
| Topology: Add CPU node | |
| Finished initializing topology | |
| amdgpu 0000:03:00.0: vgaarb: deactivate vga console | |
| Console: switching to colour dummy device 80x25 | |
| [drm] initializing kernel modesetting (NAVI14 0x1002:0x7340 0x1682:0x5501 0xC5). | |
| [drm] register mmio base: 0xDFB00000 | |
| [drm] register mmio size: 524288 | |
| intel_rapl_common: Found RAPL domain package | |
| intel_rapl_common: Found RAPL domain core | |
| intel_rapl_common: Found RAPL domain dram | |
| [drm] set register base offset for ATHUB | |
| [drm] set register base offset for CLKA | |
| [drm] set register base offset for CLKA | |
| [drm] set register base offset for CLKA | |
| [drm] set register base offset for CLKA | |
| [drm] set register base offset for CLKA | |
| [drm] set register base offset for DF | |
| [drm] set register base offset for DMU | |
| [drm] set register base offset for GC | |
| [drm] set register base offset for HDP | |
| [drm] set register base offset for MMHUB | |
| [drm] set register base offset for MP0 | |
| [drm] set register base offset for MP1 | |
| [drm] set register base offset for NBIF | |
| [drm] set register base offset for NBIF | |
| [drm] set register base offset for OSSSYS | |
| [drm] set register base offset for SDMA0 | |
| [drm] set register base offset for SDMA1 | |
| [drm] set register base offset for SMUIO | |
| [drm] set register base offset for THM | |
| [drm] set register base offset for UVD | |
| [drm] add ip block number 0 <nv_common> | |
| [drm] add ip block number 1 <gmc_v10_0> | |
| [drm] add ip block number 2 <navi10_ih> | |
| [drm] add ip block number 3 <psp> | |
| [drm] add ip block number 4 <smu> | |
| [drm] add ip block number 5 <dm> | |
| [drm] add ip block number 6 <gfx_v10_0> | |
| [drm] add ip block number 7 <sdma_v5_0> | |
| [drm] add ip block number 8 <vcn_v2_0> | |
| [drm] add ip block number 9 <jpeg_v2_0> | |
| amdgpu 0000:03:00.0: No more image in the PCI ROM | |
| ATOM BIOS: 113-55X86SSD2-X02 | |
| [drm] VCN decode is enabled in VM mode | |
| [drm] VCN encode is enabled in VM mode | |
| [drm] JPEG decode is enabled in VM mode | |
| [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit | |
| amdgpu 0000:03:00.0: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used) | |
| amdgpu 0000:03:00.0: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF | |
| [drm] Detected VRAM RAM=8176M, BAR=256M | |
| [drm] RAM width 128bits GDDR6 | |
| [TTM] Zone kernel: Available graphics memory: 32892210 KiB | |
| [TTM] Zone dma32: Available graphics memory: 2097152 KiB | |
| [TTM] Initializing pool allocator | |
| [TTM] Initializing DMA pool allocator | |
| [drm] amdgpu: 8176M of VRAM memory ready | |
| [drm] amdgpu: 8176M of GTT memory ready. | |
| [drm] GART: num cpu pages 131072, num gpu pages 131072 | |
| [drm] PCIE GART of 512M enabled (table at 0x0000008000900000). | |
| amdgpu 0000:03:00.0: Direct firmware load for amdgpu/navi14_ta.bin failed with error -2 | |
| amdgpu 0000:03:00.0: psp v11.0: Failed to load firmware "amdgpu/navi14_ta.bin" | |
| [drm] use_doorbell being set to: [true] | |
| [drm] use_doorbell being set to: [true] | |
| [drm] Found VCN firmware Version ENC: 1.7 DEC: 4 VEP: 0 Revision: 13 | |
| [drm] PSP loading VCN firmware | |
| [drm] reserve 0xa00000 from 0x81fe400000 for PSP TMR | |
| amdgpu: [powerplay] use vbios provided pptable | |
| amdgpu: [powerplay] smu driver if version = 0x00000034, smu fw if version = 0x00000036, smu fw version = 0x00351a00 (53.26.0) | |
| amdgpu: [powerplay] SMU driver if version not matched | |
| amdgpu: [powerplay] SMU is initialized successfully! | |
| [drm] Display Core initialized with v3.2.69! | |
| snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu]) | |
| [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
| [drm] Driver supports precise vblank timestamp query. | |
| [drm] kiq ring mec 2 pipe 1 q 0 | |
| [drm] VCN decode and encode initialized successfully(under DPG Mode). | |
| [drm] JPEG decode initialized successfully. | |
| kfd kfd: Allocated 3969056 bytes on gart | |
| Virtual CRAT table created for GPU | |
| Parsing CRAT table with 1 nodes | |
| Creating topology SYSFS entries | |
| Topology: Add dGPU node [0x7340:0x1002] | |
| kfd kfd: added device 1002:7340 | |
| [drm] fb mappable at 0xC0AC1000 | |
| [drm] vram apper at 0xC0000000 | |
| [drm] size 14745600 | |
| [drm] fb depth is 24 | |
| [drm] pitch is 10240 | |
| fbcon: amdgpudrmfb (fb0) is primary device | |
| Console: switching to colour frame buffer device 320x90 | |
| amdgpu 0000:03:00.0: fb0: amdgpudrmfb frame buffer device | |
| amdgpu 0000:03:00.0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0 | |
| amdgpu 0000:03:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0 | |
| amdgpu 0000:03:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0 | |
| amdgpu 0000:03:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0 | |
| amdgpu 0000:03:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0 | |
| amdgpu 0000:03:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0 | |
| amdgpu 0000:03:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0 | |
| amdgpu 0000:03:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0 | |
| amdgpu 0000:03:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0 | |
| amdgpu 0000:03:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0 | |
| amdgpu 0000:03:00.0: ring sdma0 uses VM inv eng 12 on hub 0 | |
| amdgpu 0000:03:00.0: ring sdma1 uses VM inv eng 13 on hub 0 | |
| amdgpu 0000:03:00.0: ring vcn_dec uses VM inv eng 0 on hub 1 | |
| amdgpu 0000:03:00.0: ring vcn_enc0 uses VM inv eng 1 on hub 1 | |
| amdgpu 0000:03:00.0: ring vcn_enc1 uses VM inv eng 4 on hub 1 | |
| amdgpu 0000:03:00.0: ring jpeg_dec uses VM inv eng 5 on hub 1 | |
| [drm] Initialized amdgpu 3.36.0 20150101 for 0000:03:00.0 on minor 0 | |
| usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7511 | |
| usbcore: registered new interface driver usblp | |
| usb 1-2: set resolution quirk: cval->res = 384 | |
| usbcore: registered new interface driver snd-usb-audio | |
| uvcvideo: Found UVC 1.00 device <unnamed> (046d:081b) | |
| uvcvideo 1-2:1.0: Entity type for entity Extension 4 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Extension 6 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Extension 7 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Processing 2 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Extension 3 was not initialized! | |
| uvcvideo 1-2:1.0: Entity type for entity Camera 1 was not initialized! | |
| input: UVC Camera (046d:081b) as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input26 | |
| usbcore: registered new interface driver uvcvideo | |
| USB Video Class driver (1.1.1) | |
| kauditd_printk_skb: 77 callbacks suppressed | |
| audit: type=1130 audit(1584257946.380:98): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-udev-settle comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584257946.649:99): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584257946.649:100): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dmraid-activation comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584257946.666:101): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=dracut-shutdown comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584257946.666:102): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1131 audit(1584257946.666:103): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=plymouth-read-write comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| audit: type=1130 audit(1584257946.799:104): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| Rounding down aligned max_sectors from 4294967295 to 4294967288 | |
| db_root: cannot open: /etc/target | |
| iscsi: registered transport (iser) | |
| audit: type=1130 audit(1584257946.842:105): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' | |
| RPC: Registered rdma transport module. | |
| RPC: Registered rdma backchannel transport module. | |
| [drm:mod_hdcp_add_display_topology [amdgpu]] *ERROR* Failed to add display topology, DTM TA is not initialized. | |
| Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
| Bluetooth: BNEP filters: protocol multicast | |
| Bluetooth: BNEP socket layer initialized | |
| [drm:mod_hdcp_add_display_topology [amdgpu]] *ERROR* Failed to add display topology, DTM TA is not initialized. | |
| usblp0: removed | |
| usblp 1-3:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x7511 | |
| usb 1-2: reset high-speed USB device number 3 using xhci_hcd | |
| Bluetooth: RFCOMM TTY layer initialized | |
| Bluetooth: RFCOMM socket layer initialized | |
| Bluetooth: RFCOMM ver 1.11 | |
| rfkill: input handler disabled | |
| nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment