Skip to content

Instantly share code, notes, and snippets.

View patahgaming's full-sized avatar

patahgaming

9 followers · 11 following
  • 13:26 (UTC +07:00)
View GitHub Profile
@RZID
RZID / hq-infra-setup.md
Last active May 1, 2026 07:46
Infrastructure setting for 3 PVE Server, kubernetes, networking and failover (network, storage)

HQ Lab Network Architecture & Setup Guide

Hardware: Ruijie RG-NBS3200-48GT4XS · PVE HQ-1/2/3 · OPNSense HA (CARP)

Prime directive: Port 1–36 must never lose internet for more than 5 minutes at any point during setup.

Switch config method: WebUI only (no CLI). All steps reference the Ruijie eWeb Management System GUI. Screenshots have been reviewed — navigation paths match your firmware (ReyeeOS 2.380.x).

Starting assumption: Switch is factory reset before on-site work begins. After factory reset, all ports are flat (same broadcast domain, all in VLAN 1). Port 1–36 already has internet from Mikrotik via port 48 untagged. Internet on port 1–36 is safe throughout Phase 1. Brief disruption (1–2 seconds) only happens during Step 1.2 when port 48 is converted to trunk mode.