| #!/bin/bash | |
| set -x | |
| # This script with documentation is available at: https://gist.github.com/blazewicz/04e666ae1f25387c8b291d81b12c550c | |
| ## 1. install required dependencies with apt | |
| apt update && apt install python3-venv python3-dev libffi-dev libssl-dev | |
| ## 2. create directory for docker-compose's virtualenv | |
| mkdir -p /opt/local/docker-compose |
This allows users to set up a 24h scheduler for each day of the week in a quick and easy way.
It is a customization of Peter Scargill Thermostat Weekend so all credits goes to him.
In the Comment node you can find instructions on how to create more schedulers in the same UI, just need to copy/paste the flow of a single scheduler and find/replace the name of variables listed in the Comment node.
UI Preview
The cc41-a can be kind of hard to use, so I figured I'd make a blog post about it.
So, without further ado, here's a ohnx terribly explains™ post explaining how I got my CC41-a working (because after all, I am the center of the universe):
First off, how do you know if you have a cc41-a?
More details - http://blog.gbaman.info/?p=791
For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i
Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).
The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int
This guide instructs you in how to unbrick an Amazon Kindle Paperwhite. The consequences of following it are your own responsibility. This method (opening the Kindle and using the serial interface) should be a last resort and should only be considered if other methods fail
