What I am using:
Other Refs:
| esphome: | |
| name: linky | |
| # https://esphome.io/components/esp8266.html | |
| esp8266: | |
| board: d1_mini | |
| # https://esphome.io/components/esp32.html | |
| #esp32: | |
| # board: lolin_s2_mini | |
| # variant: esp32s2 | |
| # WiFi Component: https://esphome.io/components/wifi.html | |
| wifi: | |
| ssid: !secret esphome_wifi_ssid | |
| password: !secret esphome_wifi_password | |
| manual_ip: | |
| static_ip: 192.168.125.84 | |
| gateway: 192.168.125.1 | |
| subnet: 255.255.255.0 | |
| dns1: 192.168.125.1 | |
| ap: | |
| ssid: Linky | |
| password: !secret esphome_wifi_password | |
| # OTA Update Component: https://esphome.io/components/ota.html | |
| ota: | |
| password: !secret esphome_ota_password | |
| # Logger Component: https://esphome.io/components/logger.html | |
| logger: | |
| baud_rate: 0 # disable logging via UART, help to avoid numerous crash with ESP_LOGD | |
| hardware_uart : UART1 | |
| level: info | |
| esp8266_store_log_strings_in_flash: false | |
| # Native API Component: https://esphome.io/components/api.html | |
| api: | |
| encryption: | |
| key: imB+N0VsxE6Ape4RhsxuyDLjCkeDIHl0GNyj1Gm3ylU= | |
| # Captive Portal: https://esphome.io/components/captive_portal.html | |
| captive_portal: | |
| # Web Server: https://esphome.io/components/web_server.html | |
| web_server: | |
| local: true | |
| port: 80 | |
| auth: | |
| username: !secret esphome_web_server_username | |
| password: !secret esphome_web_server_password | |
| # Time: https://esphome.io/components/time.html | |
| time: | |
| - platform: homeassistant | |
| timezone: "Europe/Paris" | |
| id: homeassistant_time | |
| # Status Binary Sensor: https://esphome.io/components/binary_sensor/status.html | |
| binary_sensor: | |
| - platform: status | |
| name: "Linky Status" | |
| # Restart Button: https://esphome.io/components/button/restart.html | |
| button: | |
| - platform: restart | |
| name: "Linky Restart" | |
| # https://esphome.io/custom/uart.html | |
| uart: | |
| id: uart_bus | |
| rx_pin: GPIO3 | |
| baud_rate: 9600 # 9600 == mode standard, 1200 == mode historique | |
| parity: EVEN | |
| data_bits: 7 | |
| stop_bits: 1 | |
| # https://esphome.io/components/sensor/teleinfo.html | |
| teleinfo: | |
| update_interval: 5s | |
| historical_mode: false # false == mode standard, true == mode historique | |
| # https://esphome.io/components/sensor/index.html | |
| sensor: | |
| # WiFi | |
| - platform: wifi_signal | |
| name: "Linky WiFi Signal" | |
| unit_of_measurement: dB | |
| device_class: signal_strength | |
| accuracy_decimals: 0 | |
| update_interval: 60s | |
| # Uptime | |
| - platform: uptime | |
| name: "Linky Uptime" | |
| unit_of_measurement: s | |
| device_class: duration | |
| accuracy_decimals: 0 | |
| update_interval: 60s | |
| #-------------- | |
| # MODE STANDARD | |
| #-------------- | |
| # Énergie active soutirée totale | |
| - platform: teleinfo | |
| tag_name: "EAST" | |
| name: "Linky Energie Soutirée" | |
| unit_of_measurement: kWh | |
| device_class: energy | |
| state_class: total_increasing | |
| accuracy_decimals: 3 | |
| filters: | |
| - multiply: 0.001 | |
| # Energie active soutirée Fournisseur, index 01 | |
| - platform: teleinfo | |
| tag_name: "EASF01" | |
| name: "Linky Energie Soutirée Tempo Bleu HC" | |
| unit_of_measurement: kWh | |
| device_class: energy | |
| state_class: total_increasing | |
| accuracy_decimals: 3 | |
| filters: | |
| - multiply: 0.001 | |
| # Energie active soutirée Fournisseur, index 02 | |
| - platform: teleinfo | |
| tag_name: "EASF02" | |
| name: "Linky Energie Soutirée Tempo Bleu HP" | |
| unit_of_measurement: kWh | |
| device_class: energy | |
| state_class: total_increasing | |
| accuracy_decimals: 3 | |
| filters: | |
| - multiply: 0.001 | |
| # Energie active soutirée Fournisseur, index 03 | |
| - platform: teleinfo | |
| tag_name: "EASF03" | |
| name: "Linky Energie Soutirée Tempo Blanc HC" | |
| unit_of_measurement: kWh | |
| device_class: energy | |
| state_class: total_increasing | |
| accuracy_decimals: 3 | |
| filters: | |
| - multiply: 0.001 | |
| # Energie active soutirée Fournisseur, index 04 | |
| - platform: teleinfo | |
| tag_name: "EASF04" | |
| name: "Linky Energie Soutirée Tempo Blanc HP" | |
| unit_of_measurement: kWh | |
| device_class: energy | |
| state_class: total_increasing | |
| accuracy_decimals: 3 | |
| filters: | |
| - multiply: 0.001 | |
| # Energie active soutirée Fournisseur, index 05 | |
| - platform: teleinfo | |
| tag_name: "EASF05" | |
| name: "Linky Energie Soutirée Tempo Rouge HC" | |
| unit_of_measurement: kWh | |
| device_class: energy | |
| state_class: total_increasing | |
| accuracy_decimals: 3 | |
| filters: | |
| - multiply: 0.001 | |
| # Energie active soutirée Fournisseur, index 06 | |
| - platform: teleinfo | |
| tag_name: "EASF06" | |
| name: "Linky Energie Soutirée Tempo Rouge HP" | |
| unit_of_measurement: kWh | |
| device_class: energy | |
| state_class: total_increasing | |
| accuracy_decimals: 3 | |
| filters: | |
| - multiply: 0.001 | |
| # # Energie active soutirée Fournisseur, index 07 | |
| # - platform: teleinfo | |
| # tag_name: "EASF07" | |
| # name: "Linky Energie Soutirée F07" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # # Energie active soutirée Fournisseur, index 08 | |
| # - platform: teleinfo | |
| # tag_name: "EASF08" | |
| # name: "Linky Energie Soutirée F08" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # # Energie active soutirée Fournisseur, index 09 | |
| # - platform: teleinfo | |
| # tag_name: "EASF09" | |
| # name: "Linky Energie Soutirée F09" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # # Energie active soutirée Fournisseur, index 10 | |
| # - platform: teleinfo | |
| # tag_name: "EASF10" | |
| # name: "Linky Energie Soutirée F10" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # # Energie active soutirée Distributeur, index 01 | |
| # - platform: teleinfo | |
| # tag_name: "EASD01" | |
| # name: "Linky Energie Soutirée D01" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # # Energie active soutirée Distributeur, index 02 | |
| # - platform: teleinfo | |
| # tag_name: "EASD02" | |
| # name: "Linky Energie Soutirée D02" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # # Energie active soutirée Distributeur, index 03 | |
| # - platform: teleinfo | |
| # tag_name: "EASD03" | |
| # name: "Linky Energie Soutirée D03" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # # Energie active soutirée Distributeur, index 04 | |
| # - platform: teleinfo | |
| # tag_name: "EASD04" | |
| # name: "Linky Energie Soutirée D04" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # Courant Efficace, phase 1 | |
| - platform: teleinfo | |
| tag_name: "IRMS1" | |
| name: "Linky Courant Efficace" | |
| unit_of_measurement: A | |
| device_class: current | |
| state_class: measurement | |
| # Tension Efficace, phase 1 | |
| - platform: teleinfo | |
| tag_name: "URMS1" | |
| name: "Linky Tension Efficace" | |
| unit_of_measurement: V | |
| device_class: voltage | |
| state_class: measurement | |
| # Puissance app. de référence | |
| # - platform: teleinfo | |
| # tag_name: "PREF" | |
| # name: "Linky Puissance Apparente Référence" | |
| # state_class: measurement | |
| # device_class: apparent_power | |
| # unit_of_measurement: VA | |
| # filters: | |
| # - multiply: 1000 | |
| # Puissance app. de coupure | |
| - platform: teleinfo | |
| tag_name: "PCOUP" | |
| name: "Linky Puissance Apparente Coupure" | |
| state_class: measurement | |
| device_class: apparent_power | |
| unit_of_measurement: VA | |
| filters: | |
| - multiply: 1000 | |
| # Puissance app. Instantanée Soutirée | |
| - platform: teleinfo | |
| tag_name: "SINSTS" | |
| name: "Linky Puissance Apparente Instantanée Soutirée" | |
| unit_of_measurement: VA | |
| state_class: measurement | |
| device_class: apparent_power | |
| # Puissance app. max. soutirée | |
| # - platform: teleinfo | |
| # tag_name: "SMAXSN" | |
| # name: "Linky Puissance Apparente Maximale Soutirée" | |
| # unit_of_measurement: VA | |
| # state_class: measurement | |
| # device_class: apparent_power | |
| # Point n de la courbe de charge active soutirée | |
| - platform: teleinfo | |
| tag_name: "CCASN" | |
| name: "Linky Puissance Active Soutirée" | |
| unit_of_measurement: W | |
| state_class: measurement | |
| device_class: power | |
| # Point n-1 de la courbe de charge active soutirée | |
| - platform: teleinfo | |
| tag_name: "CCASN-1" | |
| name: "Linky Puissance Active Soutirée N-1" | |
| unit_of_measurement: W | |
| state_class: measurement | |
| device_class: power | |
| # Tension Moyenne, phase 1 | |
| # - platform: teleinfo | |
| # tag_name: "UMOY1" | |
| # name: "Linky Tension Moyenne" | |
| # unit_of_measurement: V | |
| # device_class: voltage | |
| # state_class: measurement | |
| #------------------------- | |
| # MODE STANDARD - TRIPHASÉ | |
| #------------------------- | |
| # # Courant Efficace, phase 2 | |
| # - platform: teleinfo | |
| # tag_name: "IRMS2" | |
| # name: "Linky Courant Efficace Phase 2" | |
| # unit_of_measurement: A | |
| # device_class: current | |
| # state_class: measurement | |
| # # Courant Efficace, phase 3 | |
| # - platform: teleinfo | |
| # tag_name: "IRMS3" | |
| # name: "Linky Courant Efficace Phase 3" | |
| # unit_of_measurement: A | |
| # device_class: current | |
| # state_class: measurement | |
| # # Tension Efficace, phase 2 | |
| # - platform: teleinfo | |
| # tag_name: "URMS2" | |
| # name: "Linky Tension Efficace Phase 2" | |
| # unit_of_measurement: V | |
| # device_class: voltage | |
| # state_class: measurement | |
| # # Tension Efficace, phase 3 | |
| # - platform: teleinfo | |
| # tag_name: "URMS3" | |
| # name: "Linky Tension Efficace Phase 3" | |
| # unit_of_measurement: V | |
| # device_class: voltage | |
| # state_class: measurement | |
| # # Puissance app. Instantanée Soutirée, phase 1 | |
| # - platform: teleinfo | |
| # tag_name: "SINSTS1" | |
| # name: "Linky Puissance Apparente Instantanée Soutirée Phase 1" | |
| # unit_of_measurement: VA | |
| # state_class: measurement | |
| # device_class: apparent_power | |
| # # Puissance app. Instantanée Soutirée, phase 2 | |
| # - platform: teleinfo | |
| # tag_name: "SINSTS2" | |
| # name: "Linky Puissance Apparente Instantanée Soutirée Phase 2" | |
| # unit_of_measurement: VA | |
| # state_class: measurement | |
| # device_class: apparent_power | |
| # # Puissance app. Instantanée Soutirée, phase 3 | |
| # - platform: teleinfo | |
| # tag_name: "SINSTS3" | |
| # name: "Linky Puissance Apparente Instantanée Soutirée Phase 3" | |
| # unit_of_measurement: VA | |
| # state_class: measurement | |
| # device_class: apparent_power | |
| # # Puissance app. max. Soutirée, phase 1 | |
| # - platform: teleinfo | |
| # tag_name: "SMAXSN1" | |
| # name: "Linky Puissance Apparente Maximale Soutirée Phase 1" | |
| # unit_of_measurement: VA | |
| # state_class: measurement | |
| # device_class: apparent_power | |
| # # Puissance app. max. Soutirée, phase 2 | |
| # - platform: teleinfo | |
| # tag_name: "SMAXSN2" | |
| # name: "Linky Puissance Apparente Maximale Soutirée Phase 2" | |
| # unit_of_measurement: VA | |
| # state_class: measurement | |
| # device_class: apparent_power | |
| # # Puissance app. max. Soutirée, phase 3 | |
| # - platform: teleinfo | |
| # tag_name: "SMAXSN3" | |
| # name: "Linky Puissance Apparente Maximale Soutirée Phase 3" | |
| # unit_of_measurement: VA | |
| # state_class: measurement | |
| # device_class: apparent_power | |
| # # Tension Moyenne, phase 2 | |
| # - platform: teleinfo | |
| # tag_name: "UMOY2" | |
| # name: "Linky Tension Moyenne Phase 2" | |
| # unit_of_measurement: V | |
| # device_class: voltage | |
| # state_class: measurement | |
| # # Tension Moyenne, phase 3 | |
| # - platform: teleinfo | |
| # tag_name: "UMOY3" | |
| # name: "Linky Tension Moyenne Phase 3" | |
| # unit_of_measurement: V | |
| # device_class: voltage | |
| # state_class: measurement | |
| #---------------------------- | |
| # MODE STANDARD - PRODUCTEURS | |
| #---------------------------- | |
| # # Energie active injectée totale | |
| # - platform: teleinfo | |
| # tag_name: "EAIT" | |
| # name: "Linky Energie Injectée" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # # Puissance app. Instantanée Injectée | |
| # - platform: teleinfo | |
| # tag_name: "SINSTI" | |
| # name: "Linky Puissance Apparente Instantanée Injectée" | |
| # unit_of_measurement: VA | |
| # state_class: measurement | |
| # device_class: apparent_power | |
| # # Puissance app. Maximale Injectée | |
| # - platform: teleinfo | |
| # tag_name: "SMAXIN" | |
| # name: "Linky Puissance Apparente Maximale Injectée" | |
| # unit_of_measurement: VA | |
| # state_class: measurement | |
| # device_class: apparent_power | |
| # # Point n de la courbe de charge active injectée | |
| # - platform: teleinfo | |
| # tag_name: "CCAIN" | |
| # name: "Linky Puissance Active Injectée" | |
| # unit_of_measurement: W | |
| # state_class: measurement | |
| # device_class: power | |
| # # Point n-1 de la courbe de charge active injectée | |
| # - platform: teleinfo | |
| # tag_name: "CCAIN-1" | |
| # name: "Linky Puissance Active Injectée N-1" | |
| # unit_of_measurement: W | |
| # state_class: measurement | |
| # device_class: power | |
| #---------------- | |
| # MODE HISTORIQUE | |
| #---------------- | |
| # # Intensité souscrite | |
| # - platform: teleinfo | |
| # tag_name: "ISOUSC" | |
| # name: "Linky Intensité souscrite" | |
| # unit_of_measurement: A | |
| # device_class: current | |
| # state_class: measurement | |
| # # Index option Base | |
| # - platform: teleinfo | |
| # tag_name: "BASE" | |
| # name: "Linky Index Base" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # # Index option HP/HC | |
| # - platform: teleinfo | |
| # tag_name: "HCHC" | |
| # name: "Linky Index HC" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # - platform: teleinfo | |
| # tag_name: "HCHP" | |
| # name: "Linky Index HP" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # # Index option EJP | |
| # - platform: teleinfo | |
| # tag_name: "EJPHN" | |
| # name: "Linky Index EJP Normal" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # - platform: teleinfo | |
| # tag_name: "EJPHPM" | |
| # name: "Linky Index EJP Pointe" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # # Index option Tempo | |
| # - platform: teleinfo | |
| # tag_name: "BBRHCJB" | |
| # name: "Linky Index Tempo Bleu HC" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # - platform: teleinfo | |
| # tag_name: "BBRHPJB" | |
| # name: "Linky Index Tempo Bleu HP" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # - platform: teleinfo | |
| # tag_name: "BBRHCJW" | |
| # name: "Linky Index Tempo Blanc HC" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # - platform: teleinfo | |
| # tag_name: "BBRHPJW" | |
| # name: "Linky Index Tempo Blanc HP" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # - platform: teleinfo | |
| # tag_name: "BBRHCJR" | |
| # name: "Linky Index Tempo Rouge HC" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # - platform: teleinfo | |
| # tag_name: "BBRHPJR" | |
| # name: "Linky Index Tempo Rouge HP" | |
| # unit_of_measurement: kWh | |
| # device_class: energy | |
| # state_class: total_increasing | |
| # accuracy_decimals: 3 | |
| # filters: | |
| # - multiply: 0.001 | |
| # # Intensité Instantanée (monophasé) | |
| # - platform: teleinfo | |
| # tag_name: "IINST" | |
| # name: "Linky Intensité Instantanée" | |
| # unit_of_measurement: A | |
| # device_class: current | |
| # state_class: measurement | |
| # # Avertissement de Dépassement De Puissance Souscrite | |
| # - platform: teleinfo | |
| # tag_name: "ADPS" | |
| # name: "Linky Intensité Instantanée Dépassement" | |
| # unit_of_measurement: A | |
| # device_class: current | |
| # state_class: measurement | |
| # # Intensité maximale appelée (monophasé) | |
| # - platform: teleinfo | |
| # tag_name: "IMAX" | |
| # name: "Linky Intensité Maximale" | |
| # unit_of_measurement: A | |
| # device_class: current | |
| # state_class: measurement | |
| # # Puissance apparente | |
| # - platform: teleinfo | |
| # tag_name: "PAPP" | |
| # name: "Linky Puissance Apparente" | |
| # unit_of_measurement: VA | |
| # state_class: measurement | |
| # device_class: apparent_power | |
| #--------------------------- | |
| # MODE HISTORIQUE - TRIPHASÉ | |
| #--------------------------- | |
| # # Intensité Instantanée, phase 1 | |
| # - platform: teleinfo | |
| # tag_name: "IINST1" | |
| # name: "Linky Intensité Instantanée Phase 1" | |
| # unit_of_measurement: A | |
| # device_class: current | |
| # state_class: measurement | |
| # # Intensité Instantanée, phase 2 | |
| # - platform: teleinfo | |
| # tag_name: "IINST2" | |
| # name: "Linky Intensité Instantanée Phase 2" | |
| # unit_of_measurement: A | |
| # device_class: current | |
| # state_class: measurement | |
| # # Intensité Instantanée, phase 3 | |
| # - platform: teleinfo | |
| # tag_name: "IINST3" | |
| # name: "Linky Intensité Instantanée Phase 3" | |
| # unit_of_measurement: A | |
| # device_class: current | |
| # state_class: measurement | |
| # # Intensité maximale appelée, phase 1 | |
| # - platform: teleinfo | |
| # tag_name: "IMAX1" | |
| # name: "Linky Intensité Maximale Phase 1" | |
| # unit_of_measurement: A | |
| # device_class: current | |
| # state_class: measurement | |
| # # Intensité maximale appelée, phase 2 | |
| # - platform: teleinfo | |
| # tag_name: "IMAX2" | |
| # name: "Linky Intensité Maximale Phase 2" | |
| # unit_of_measurement: A | |
| # device_class: current | |
| # state_class: measurement | |
| # # Intensité maximale appelée, phase 3 | |
| # - platform: teleinfo | |
| # tag_name: "IMAX3" | |
| # name: "Linky Intensité Maximale Phase 3" | |
| # unit_of_measurement: A | |
| # device_class: current | |
| # state_class: measurement | |
| # # Puissance maximale atteinte | |
| # - platform: teleinfo | |
| # tag_name: "PMAX" | |
| # name: "Linky Puissance Maximale" | |
| # unit_of_measurement: W | |
| # state_class: measurement | |
| # device_class: power | |
| # https://esphome.io/components/text_sensor/index.html | |
| text_sensor: | |
| - platform: wifi_info | |
| ip_address: | |
| name: Linky IP Address | |
| mac_address: | |
| name: Linky Wifi Mac Address | |
| ssid: | |
| name: Linky Wifi SSID | |
| bssid: | |
| name: Linky Wifi BSSID | |
| #-------------- | |
| # MODE STANDARD | |
| #-------------- | |
| # # Adresse Secondaire du Compteur | |
| # - platform: teleinfo | |
| # tag_name: "ADSC" | |
| # name: "Linky Adresse Secondaire" | |
| # Nom du calendrier tarifaire fournisseur | |
| - platform: teleinfo | |
| tag_name: "NGTF" | |
| name: "Linky Calendrier Tarifaire" | |
| icon: mdi:information | |
| # Libellé tarif fournisseur en cours | |
| - platform: teleinfo | |
| tag_name: "LTARF" | |
| name: "Linky Tarif Actuel" | |
| icon: mdi:information | |
| # Registre de Statuts | |
| # - platform: teleinfo | |
| # tag_name: "STGE" | |
| # name: "Linky Registre de Statuts" | |
| # icon: mdi:information | |
| # # Message court | |
| # - platform: teleinfo | |
| # tag_name: "MSG1" | |
| # name: "Linky Message court" | |
| # # Message Ultra court | |
| # - platform: teleinfo | |
| # tag_name: "MSG2" | |
| # name: "Linky Message Ultra court" | |
| # # PRM | |
| # - platform: teleinfo | |
| # tag_name: "PRM" | |
| # name: "Linky PRM" | |
| # # Relais | |
| # - platform: teleinfo | |
| # tag_name: "RELAIS" | |
| # name: "Linky Relais" | |
| #---------------- | |
| # MODE HISTORIQUE | |
| #---------------- | |
| # # Adresse du compteur | |
| # - platform: teleinfo | |
| # tag_name: "ADCO" | |
| # name: "Linky Adresse" | |
| # # Option tarifaire choisie | |
| # - platform: teleinfo | |
| # tag_name: "OPTARIF" | |
| # name: "Linky Option Tarifaire" | |
| # # Préavis Début EJP (30 min) | |
| # - platform: teleinfo | |
| # tag_name: "PEJP" | |
| # name: "Linky Préavis EJP" | |
| # # Période Tarifaire en cours | |
| # - platform: teleinfo | |
| # tag_name: "PTEC" | |
| # name: "Linky Période Tarifaire" | |
| # # Couleur du lendemain | |
| # - platform: teleinfo | |
| # tag_name: "DEMAIN" | |
| # name: "Linky Couleur Demain" | |
| # # Horaire Heures Pleines Heures Creuses | |
| # - platform: teleinfo | |
| # tag_name: "HHPHC" | |
| # name: "Linky Horaire HP/HC" | |
| # # Mot d'état du compteur | |
| # - platform: teleinfo | |
| # tag_name: "MOTDETAT" | |
| # name: "Linky Mot d'état" | |
| # # Présence des potentiels | |
| # - platform: teleinfo | |
| # tag_name: "PPOT" | |
| # name: "Linky Présence Potentiels" |
Après avoir réfléchi, je ne comprends pas le solution CT. Ils ne font que mesurer le courant par phase, et c'est un information déjà livré par le Linky, non?
A mon avis, on ne peut pas faire une bonne calcule de Puissance active à partir des trois U et I dans un installation triphasé que dans le cas ou les charges ("load") sont balancés entre les phases - ce qui est rarement le cas dans un installation privé.
Cela va uniquement fonctionner bien dans un installation monophasé.
Ou je me trompe?
@ArnieO :
Il y a donc un autre gamme de compteur pour des installations avec production solaire?
C'est le même, mais Enedis active par CPL à distance une option pour le faire changer de mode afin qu'il compte l'injection et l'expose. Seuls les personnes ayant une production solaire dédiés à la revente totale (donc non en auto-consommaton) ont accès au mode producteur du Linky.
Ils ne font que mesurer le courant par phase, et c'est un information déjà livré par le Linky, non?
IRMS1 est dispo en modo, et IRMS1,2,3 en tri. Mais c'est une indication, pas une mesure. Regarde le graphe que ça donne. Ce sont des paliers d'intensité pris à des longs intervalles:
Ça fait des années que des pros s'y collent ;-) La seule solution pour mesurer la puissance active et PF, c'est le tore comme un Shelly EM. Et un PZEM en plus ne mesurerait que dans un sens (la consommation), mais pas les deux. Un JSY peut faire les deux, ou un truc custom.
Du coup les solutions sont de coupler la solution avec une pince ou alors de faire une solution basée sur un capteur à effet de Hall comme ce que fait une solution commericale.
Ça fait des années que des pros s'y collent ;-)
Je te crois!
Regarde le graphe que ça donne.
Effectivement, c'est vraiment décevant - et pas utile du tout quand le résolution est 1A.
Le Linky ne cesse pas de surprendre de façon négatif.
Il y a une multitude de bons compteurs sur le marché - et Enedis a choisi ça.
Comme tu dis...
Merci de tes précisions, mais cela est vraiment surprenant.
Oui, on est actuellement sur un ESP32-S2 (car pas besoin de BLE).
Si les solutions commerciales en France affichent Watts en prenant le chiffre VA, le seul avantage est que le puissance est toujours sur estimé (Puss App >= Puiss Act). Et le paramètre EAST donne au moins le bon chiffre pour les kWh.
L'idée de livrer avec un PZEM / tore de mesure ne me plais pas du tout. Il faut être compétent pour bricoler la-dedans (potentiellement risqué).
Tu dis que le Linky ne donne pas les puissances injectées sur le réseau (qui aussi est surprenant). Il y a donc un autre gamme de compteur pour des installations avec production solaire?
Tous les compteurs qu'on supporte avec notre solution donnent le production (puissance et énergie) dans des paramètres séparés. Le plus souvent comme un chiffre "net" (export/"injectée" ou import/"soutirée" est toujours zero), mais certains gammes de compteurs triphasés peuvent indiquer les deux puissances au même temps, si il y a injection sur une phase et soutirage sur un autre phase.
Encore merci beaucoup: vos informations sont importants pour notre évaluation!