Skip to content

Instantly share code, notes, and snippets.

@lucasssvaz

lucasssvaz/README.md

Last active May 2, 2025 16:11
Show Gist options
  • Save lucasssvaz/bd105988aaf72ec291ecf94ecc2c692d to your computer and use it in GitHub Desktop.
Save lucasssvaz/bd105988aaf72ec291ecf94ecc2c692d to your computer and use it in GitHub Desktop.
Download ZIP
ESP32 BLE Mesh Arduino Example
Raw
README.md

BLE Mesh Example

These are modified files to be able to compile the ble_mesh.ino example. Note that a compilation error will still occur as the libraries need to be recompiled with these configs.

This is based on the ESP-IDF Example

Raw
ble_mesh.ino
#include "esp_bt.h"
#include "esp_bt_main.h"
#include "esp_bt_device.h"
#include "esp_ble_mesh_defs.h"
#include "esp_ble_mesh_common_api.h"
#include "esp_ble_mesh_networking_api.h"
#include "esp_ble_mesh_provisioning_api.h"
#include "esp_ble_mesh_config_model_api.h"
#include "esp_ble_mesh_generic_model_api.h"
#include "esp_ble_mesh_local_data_operation_api.h"
#define CID_ESP 0x02E5
#define LED_R GPIO_NUM_25
#define LED_G GPIO_NUM_26
#define LED_B GPIO_NUM_27
#define LED_ON 1
#define LED_OFF 0
struct _led_state {
uint8_t current;
uint8_t previous;
uint8_t pin;
char *name;
};
struct _led_state led_state[3] = {
{ LED_OFF, LED_OFF, LED_R, "red" },
{ LED_OFF, LED_OFF, LED_G, "green" },
{ LED_OFF, LED_OFF, LED_B, "blue" },
};
static uint8_t dev_uuid[16] = { 0xdd, 0xdd };
static esp_ble_mesh_cfg_srv_t config_server = {
.net_transmit = ESP_BLE_MESH_TRANSMIT(2, 20),
.relay = ESP_BLE_MESH_RELAY_DISABLED,
.relay_retransmit = ESP_BLE_MESH_TRANSMIT(2, 20),
.beacon = ESP_BLE_MESH_BEACON_ENABLED,
#if defined(CONFIG_BLE_MESH_GATT_PROXY_SERVER)
.gatt_proxy = ESP_BLE_MESH_GATT_PROXY_ENABLED,
#else
.gatt_proxy = ESP_BLE_MESH_GATT_PROXY_NOT_SUPPORTED,
#endif
#if defined(CONFIG_BLE_MESH_FRIEND)
.friend_state = ESP_BLE_MESH_FRIEND_ENABLED,
#else
.friend_state = ESP_BLE_MESH_FRIEND_NOT_SUPPORTED,
#endif
.default_ttl = 7,
};
ESP_BLE_MESH_MODEL_PUB_DEFINE(onoff_pub_0, 2 + 3, ROLE_NODE);
static esp_ble_mesh_gen_onoff_srv_t onoff_server_0 = {
.rsp_ctrl = {
.get_auto_rsp = ESP_BLE_MESH_SERVER_AUTO_RSP,
.set_auto_rsp = ESP_BLE_MESH_SERVER_AUTO_RSP,
}
};
ESP_BLE_MESH_MODEL_PUB_DEFINE(onoff_pub_1, 2 + 3, ROLE_NODE);
static esp_ble_mesh_gen_onoff_srv_t onoff_server_1 = {
.rsp_ctrl = {
.get_auto_rsp = ESP_BLE_MESH_SERVER_RSP_BY_APP,
.set_auto_rsp = ESP_BLE_MESH_SERVER_RSP_BY_APP,
}
};
ESP_BLE_MESH_MODEL_PUB_DEFINE(onoff_pub_2, 2 + 3, ROLE_NODE);
static esp_ble_mesh_gen_onoff_srv_t onoff_server_2 = {
.rsp_ctrl = {
.get_auto_rsp = ESP_BLE_MESH_SERVER_AUTO_RSP,
.set_auto_rsp = ESP_BLE_MESH_SERVER_RSP_BY_APP,
}
};
static esp_ble_mesh_model_t root_models[] = {
ESP_BLE_MESH_MODEL_CFG_SRV(&config_server),
ESP_BLE_MESH_MODEL_GEN_ONOFF_SRV(&onoff_pub_0, &onoff_server_0),
};
static esp_ble_mesh_model_t extend_model_0[] = {
ESP_BLE_MESH_MODEL_GEN_ONOFF_SRV(&onoff_pub_1, &onoff_server_1),
};
static esp_ble_mesh_model_t extend_model_1[] = {
ESP_BLE_MESH_MODEL_GEN_ONOFF_SRV(&onoff_pub_2, &onoff_server_2),
};
static esp_ble_mesh_elem_t elements[] = {
ESP_BLE_MESH_ELEMENT(0, root_models, ESP_BLE_MESH_MODEL_NONE),
ESP_BLE_MESH_ELEMENT(0, extend_model_0, ESP_BLE_MESH_MODEL_NONE),
ESP_BLE_MESH_ELEMENT(0, extend_model_1, ESP_BLE_MESH_MODEL_NONE),
};
static esp_ble_mesh_comp_t composition = {
.cid = CID_ESP,
.element_count = ARRAY_SIZE(elements),
.elements = elements,
};
/* Disable OOB security for SILabs Android app */
static esp_ble_mesh_prov_t provision = {
.uuid = dev_uuid,
#if 0
.output_size = 4,
.output_actions = ESP_BLE_MESH_DISPLAY_NUMBER,
.input_actions = ESP_BLE_MESH_PUSH,
.input_size = 4,
#else
.output_size = 0,
.output_actions = 0,
#endif
};
void ble_mesh_get_dev_uuid(uint8_t *dev_uuid)
{
if (dev_uuid == NULL) {
printf("%s, Invalid device uuid\n", __func__);
return;
}
/* Copy device address to the device uuid with offset equals to 2 here.
* The first two bytes is used for matching device uuid by Provisioner.
* And using device address here is to avoid using the same device uuid
* by different unprovisioned devices.
*/
memcpy(dev_uuid + 2, esp_bt_dev_get_address(), BD_ADDR_LEN);
}
esp_err_t bluetooth_init(void)
{
esp_err_t ret;
ESP_ERROR_CHECK(esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT));
esp_bt_controller_config_t bt_cfg = BT_CONTROLLER_INIT_CONFIG_DEFAULT();
ret = esp_bt_controller_init(&bt_cfg);
if (ret) {
printf("%s initialize controller failed\n", __func__);
return ret;
}
ret = esp_bt_controller_enable(ESP_BT_MODE_BLE);
if (ret) {
printf("%s enable controller failed\n", __func__);
return ret;
}
ret = esp_bluedroid_init();
if (ret) {
printf("%s init bluetooth failed\n", __func__);
return ret;
}
ret = esp_bluedroid_enable();
if (ret) {
printf("%s enable bluetooth failed\n", __func__);
return ret;
}
return ret;
}
void board_led_operation(uint8_t pin, uint8_t onoff)
{
for (int i = 0; i < 3; i++) {
if (led_state[i].pin != pin) {
continue;
}
if (onoff == led_state[i].previous) {
printf("led %s is already %s\n",
led_state[i].name, (onoff ? "on" : "off"));
return;
}
digitalWrite(pin, onoff);
led_state[i].previous = onoff;
return;
}
printf("LED is not found!\n");
}
static void board_led_init(void)
{
for (int i = 0; i < 3; i++) {
pinMode(led_state[i].pin, OUTPUT);
digitalWrite(led_state[i].pin, LED_OFF);
led_state[i].previous = LED_OFF;
}
}
static void prov_complete(uint16_t net_idx, uint16_t addr, uint8_t flags, uint32_t iv_index)
{
printf("net_idx: 0x%04x, addr: 0x%04x\n", net_idx, addr);
printf("flags: 0x%02x, iv_index: 0x%08\n" PRIx32, flags, iv_index);
board_led_operation(LED_G, LED_OFF);
}
static void example_change_led_state(esp_ble_mesh_model_t *model,
esp_ble_mesh_msg_ctx_t *ctx, uint8_t onoff)
{
uint16_t primary_addr = esp_ble_mesh_get_primary_element_address();
uint8_t elem_count = esp_ble_mesh_get_element_count();
struct _led_state *led = NULL;
uint8_t i;
if (ESP_BLE_MESH_ADDR_IS_UNICAST(ctx->recv_dst)) {
for (i = 0; i < elem_count; i++) {
if (ctx->recv_dst == (primary_addr + i)) {
led = &led_state[i];
board_led_operation(led->pin, onoff);
}
}
} else if (ESP_BLE_MESH_ADDR_IS_GROUP(ctx->recv_dst)) {
if (esp_ble_mesh_is_model_subscribed_to_group(model, ctx->recv_dst)) {
led = &led_state[model->element->element_addr - primary_addr];
board_led_operation(led->pin, onoff);
}
} else if (ctx->recv_dst == 0xFFFF) {
led = &led_state[model->element->element_addr - primary_addr];
board_led_operation(led->pin, onoff);
}
}
static void example_handle_gen_onoff_msg(esp_ble_mesh_model_t *model,
esp_ble_mesh_msg_ctx_t *ctx,
esp_ble_mesh_server_recv_gen_onoff_set_t *set)
{
esp_ble_mesh_gen_onoff_srv_t *srv = (esp_ble_mesh_gen_onoff_srv_t *) model->user_data;
switch (ctx->recv_op) {
case ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_GET:
esp_ble_mesh_server_model_send_msg(model, ctx,
ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_STATUS, sizeof(srv->state.onoff), &srv->state.onoff);
break;
case ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_SET:
case ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_SET_UNACK:
if (set->op_en == false) {
srv->state.onoff = set->onoff;
} else {
/* TODO: Delay and state transition */
srv->state.onoff = set->onoff;
}
if (ctx->recv_op == ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_SET) {
esp_ble_mesh_server_model_send_msg(model, ctx,
ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_STATUS, sizeof(srv->state.onoff), &srv->state.onoff);
}
esp_ble_mesh_model_publish(model, ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_STATUS,
sizeof(srv->state.onoff), &srv->state.onoff, ROLE_NODE);
example_change_led_state(model, ctx, srv->state.onoff);
break;
default:
break;
}
}
static void example_ble_mesh_provisioning_cb(esp_ble_mesh_prov_cb_event_t event,
esp_ble_mesh_prov_cb_param_t *param)
{
switch (event) {
case ESP_BLE_MESH_PROV_REGISTER_COMP_EVT:
printf("ESP_BLE_MESH_PROV_REGISTER_COMP_EVT, err_code %d\n", param->prov_register_comp.err_code);
break;
case ESP_BLE_MESH_NODE_PROV_ENABLE_COMP_EVT:
printf("ESP_BLE_MESH_NODE_PROV_ENABLE_COMP_EVT, err_code %d\n", param->node_prov_enable_comp.err_code);
break;
case ESP_BLE_MESH_NODE_PROV_LINK_OPEN_EVT:
printf("ESP_BLE_MESH_NODE_PROV_LINK_OPEN_EVT, bearer %s\n",
param->node_prov_link_open.bearer == ESP_BLE_MESH_PROV_ADV ? "PB-ADV" : "PB-GATT");
break;
case ESP_BLE_MESH_NODE_PROV_LINK_CLOSE_EVT:
printf("ESP_BLE_MESH_NODE_PROV_LINK_CLOSE_EVT, bearer %s\n",
param->node_prov_link_close.bearer == ESP_BLE_MESH_PROV_ADV ? "PB-ADV" : "PB-GATT");
break;
case ESP_BLE_MESH_NODE_PROV_COMPLETE_EVT:
printf("ESP_BLE_MESH_NODE_PROV_COMPLETE_EVT\n");
prov_complete(param->node_prov_complete.net_idx, param->node_prov_complete.addr,
param->node_prov_complete.flags, param->node_prov_complete.iv_index);
break;
case ESP_BLE_MESH_NODE_PROV_RESET_EVT:
printf("ESP_BLE_MESH_NODE_PROV_RESET_EVT\n");
break;
case ESP_BLE_MESH_NODE_SET_UNPROV_DEV_NAME_COMP_EVT:
printf("ESP_BLE_MESH_NODE_SET_UNPROV_DEV_NAME_COMP_EVT, err_code %d\n", param->node_set_unprov_dev_name_comp.err_code);
break;
default:
break;
}
}
static void example_ble_mesh_generic_server_cb(esp_ble_mesh_generic_server_cb_event_t event,
esp_ble_mesh_generic_server_cb_param_t *param)
{
esp_ble_mesh_gen_onoff_srv_t *srv;
printf("event 0x%02x, opcode 0x%04" PRIx32 ", src 0x%04x, dst 0x%04x\n",
event, param->ctx.recv_op, param->ctx.addr, param->ctx.recv_dst);
switch (event) {
case ESP_BLE_MESH_GENERIC_SERVER_STATE_CHANGE_EVT:
printf("ESP_BLE_MESH_GENERIC_SERVER_STATE_CHANGE_EVT\n");
if (param->ctx.recv_op == ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_SET ||
param->ctx.recv_op == ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_SET_UNACK) {
printf("onoff 0x%02x\n", param->value.state_change.onoff_set.onoff);
example_change_led_state(param->model, &param->ctx, param->value.state_change.onoff_set.onoff);
}
break;
case ESP_BLE_MESH_GENERIC_SERVER_RECV_GET_MSG_EVT:
printf("ESP_BLE_MESH_GENERIC_SERVER_RECV_GET_MSG_EVT\n");
if (param->ctx.recv_op == ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_GET) {
srv = (esp_ble_mesh_gen_onoff_srv_t *) param->model->user_data;
printf("onoff 0x%02x\n", srv->state.onoff);
example_handle_gen_onoff_msg(param->model, &param->ctx, NULL);
}
break;
case ESP_BLE_MESH_GENERIC_SERVER_RECV_SET_MSG_EVT:
printf("ESP_BLE_MESH_GENERIC_SERVER_RECV_SET_MSG_EVT\n");
if (param->ctx.recv_op == ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_SET ||
param->ctx.recv_op == ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_SET_UNACK) {
printf("onoff 0x%02x, tid 0x%02x\n", param->value.set.onoff.onoff, param->value.set.onoff.tid);
if (param->value.set.onoff.op_en) {
printf("trans_time 0x%02x, delay 0x%02x\n",
param->value.set.onoff.trans_time, param->value.set.onoff.delay);
}
example_handle_gen_onoff_msg(param->model, &param->ctx, &param->value.set.onoff);
}
break;
default:
printf("Unknown Generic Server event 0x%02x\n", event);
break;
}
}
static void example_ble_mesh_config_server_cb(esp_ble_mesh_cfg_server_cb_event_t event,
esp_ble_mesh_cfg_server_cb_param_t *param)
{
if (event == ESP_BLE_MESH_CFG_SERVER_STATE_CHANGE_EVT) {
switch (param->ctx.recv_op) {
case ESP_BLE_MESH_MODEL_OP_APP_KEY_ADD:
printf("ESP_BLE_MESH_MODEL_OP_APP_KEY_ADD\n");
printf("net_idx 0x%04x, app_idx 0x%04x\n",
param->value.state_change.appkey_add.net_idx,
param->value.state_change.appkey_add.app_idx);
printf("AppKey: \n");
for (int i = 0; i < 16; i++) {
printf("%02x", param->value.state_change.appkey_add.app_key[i]);
}
printf("\n");
break;
case ESP_BLE_MESH_MODEL_OP_MODEL_APP_BIND:
printf("ESP_BLE_MESH_MODEL_OP_MODEL_APP_BIND\n");
printf("elem_addr 0x%04x, app_idx 0x%04x, cid 0x%04x, mod_id 0x%04x\n",
param->value.state_change.mod_app_bind.element_addr,
param->value.state_change.mod_app_bind.app_idx,
param->value.state_change.mod_app_bind.company_id,
param->value.state_change.mod_app_bind.model_id);
break;
case ESP_BLE_MESH_MODEL_OP_MODEL_SUB_ADD:
printf("ESP_BLE_MESH_MODEL_OP_MODEL_SUB_ADD\n");
printf("elem_addr 0x%04x, sub_addr 0x%04x, cid 0x%04x, mod_id 0x%04x\n",
param->value.state_change.mod_sub_add.element_addr,
param->value.state_change.mod_sub_add.sub_addr,
param->value.state_change.mod_sub_add.company_id,
param->value.state_change.mod_sub_add.model_id);
break;
default:
break;
}
}
}
static esp_err_t ble_mesh_init(void)
{
esp_err_t err = ESP_OK;
esp_ble_mesh_register_prov_callback(example_ble_mesh_provisioning_cb);
esp_ble_mesh_register_config_server_callback(example_ble_mesh_config_server_cb);
esp_ble_mesh_register_generic_server_callback(example_ble_mesh_generic_server_cb);
err = esp_ble_mesh_init(&provision, &composition);
if (err != ESP_OK) {
printf("Failed to initialize mesh stack (err %d)\n", err);
return err;
}
uint32_t flags = ESP_BLE_MESH_PROV_ADV | ESP_BLE_MESH_PROV_GATT;
err = esp_ble_mesh_node_prov_enable((esp_ble_mesh_prov_bearer_t) flags);
if (err != ESP_OK) {
printf("Failed to enable mesh node (err %d)\n", err);
return err;
}
printf("BLE Mesh Node initialized\n");
board_led_operation(LED_G, LED_ON);
return err;
}
void setup(void)
{
esp_err_t err;
Serial.begin(115200);
printf("Initializing...\n");
board_led_init();
err = bluetooth_init();
if (err) {
printf("esp32_bluetooth_init failed (err %d)\n", err);
return;
}
ble_mesh_get_dev_uuid(dev_uuid);
/* Initialize the Bluetooth Mesh Subsystem */
err = ble_mesh_init();
if (err) {
printf("Bluetooth mesh init failed (err %d)\n", err);
}
}
void loop(void)
{
}
Raw
esp_ble_mesh_defs.h
/*
* SPDX-FileCopyrightText: 2017-2021 Espressif Systems (Shanghai) CO LTD
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef _ESP_BLE_MESH_DEFS_H_
#define _ESP_BLE_MESH_DEFS_H_
#include <stdint.h>
#include "mesh_config.h"
#include "mesh_common.h"
#include "proxy_server.h"
#include "provisioner_main.h"
#ifdef __cplusplus
extern "C" {
#endif
/*!< The maximum length of a BLE Mesh message, including Opcode, Payload and TransMIC */
#define ESP_BLE_MESH_SDU_MAX_LEN 384
/*!< Length of a short Mesh MIC. */
#define ESP_BLE_MESH_MIC_SHORT 4
/*!< Length of a long Mesh MIC. */
#define ESP_BLE_MESH_MIC_LONG 8
/*!< The maximum length of a BLE Mesh provisioned node name */
#define ESP_BLE_MESH_NODE_NAME_MAX_LEN 31
/*!< The maximum length of a BLE Mesh unprovisioned device name */
#define ESP_BLE_MESH_DEVICE_NAME_MAX_LEN DEVICE_NAME_SIZE
/*!< The maximum length of settings user id */
#define ESP_BLE_MESH_SETTINGS_UID_SIZE 20
/*!< Invalid settings index */
#define ESP_BLE_MESH_INVALID_SETTINGS_IDX 0xFF
/*!< Define the BLE Mesh octet 16 bytes size */
#define ESP_BLE_MESH_OCTET16_LEN 16
typedef uint8_t esp_ble_mesh_octet16_t[ESP_BLE_MESH_OCTET16_LEN];
/*!< Define the BLE Mesh octet 8 bytes size */
#define ESP_BLE_MESH_OCTET8_LEN 8
typedef uint8_t esp_ble_mesh_octet8_t[ESP_BLE_MESH_OCTET8_LEN];
/*!< Invalid Company ID */
#define ESP_BLE_MESH_CID_NVAL 0xFFFF
/*!< Special TTL value to request using configured default TTL */
#define ESP_BLE_MESH_TTL_DEFAULT 0xFF
/*!< Maximum allowed TTL value */
#define ESP_BLE_MESH_TTL_MAX 0x7F
#define ESP_BLE_MESH_ADDR_UNASSIGNED 0x0000
#define ESP_BLE_MESH_ADDR_ALL_NODES 0xFFFF
#define ESP_BLE_MESH_ADDR_PROXIES 0xFFFC
#define ESP_BLE_MESH_ADDR_FRIENDS 0xFFFD
#define ESP_BLE_MESH_ADDR_RELAYS 0xFFFE
#define ESP_BLE_MESH_KEY_UNUSED 0xFFFF
#define ESP_BLE_MESH_KEY_DEV 0xFFFE
#define ESP_BLE_MESH_KEY_PRIMARY 0x0000
#define ESP_BLE_MESH_KEY_ANY 0xFFFF
/*!< Primary Network Key index */
#define ESP_BLE_MESH_NET_PRIMARY 0x000
/*!< Relay state value */
#define ESP_BLE_MESH_RELAY_DISABLED 0x00
#define ESP_BLE_MESH_RELAY_ENABLED 0x01
#define ESP_BLE_MESH_RELAY_NOT_SUPPORTED 0x02
/*!< Beacon state value */
#define ESP_BLE_MESH_BEACON_DISABLED 0x00
#define ESP_BLE_MESH_BEACON_ENABLED 0x01
/*!< GATT Proxy state value */
#define ESP_BLE_MESH_GATT_PROXY_DISABLED 0x00
#define ESP_BLE_MESH_GATT_PROXY_ENABLED 0x01
#define ESP_BLE_MESH_GATT_PROXY_NOT_SUPPORTED 0x02
/*!< Friend state value */
#define ESP_BLE_MESH_FRIEND_DISABLED 0x00
#define ESP_BLE_MESH_FRIEND_ENABLED 0x01
#define ESP_BLE_MESH_FRIEND_NOT_SUPPORTED 0x02
/*!< Node identity state value */
#define ESP_BLE_MESH_NODE_IDENTITY_STOPPED 0x00
#define ESP_BLE_MESH_NODE_IDENTITY_RUNNING 0x01
#define ESP_BLE_MESH_NODE_IDENTITY_NOT_SUPPORTED 0x02
/*!< Supported features */
#define ESP_BLE_MESH_FEATURE_RELAY BIT(0)
#define ESP_BLE_MESH_FEATURE_PROXY BIT(1)
#define ESP_BLE_MESH_FEATURE_FRIEND BIT(2)
#define ESP_BLE_MESH_FEATURE_LOW_POWER BIT(3)
#define ESP_BLE_MESH_FEATURE_ALL_SUPPORTED (ESP_BLE_MESH_FEATURE_RELAY | \
ESP_BLE_MESH_FEATURE_PROXY | \
ESP_BLE_MESH_FEATURE_FRIEND | \
ESP_BLE_MESH_FEATURE_LOW_POWER)
#define ESP_BLE_MESH_ADDR_IS_UNICAST(addr) ((addr) && (addr) < 0x8000)
#define ESP_BLE_MESH_ADDR_IS_GROUP(addr) ((addr) >= 0xC000 && (addr) <= 0xFF00)
#define ESP_BLE_MESH_ADDR_IS_VIRTUAL(addr) ((addr) >= 0x8000 && (addr) < 0xC000)
#define ESP_BLE_MESH_ADDR_IS_RFU(addr) ((addr) >= 0xFF00 && (addr) <= 0xFFFB)
#define ESP_BLE_MESH_INVALID_NODE_INDEX 0xFFFF
/** @def ESP_BLE_MESH_TRANSMIT
*
* @brief Encode transmission count & interval steps.
*
* @note For example, ESP_BLE_MESH_TRANSMIT(2, 20) means that the message
* will be sent about 90ms(count is 3, step is 1, interval is 30 ms
* which includes 10ms of advertising interval random delay).
*
* @param count Number of retransmissions (first transmission is excluded).
* @param int_ms Interval steps in milliseconds. Must be greater than 0
* and a multiple of 10.
*
* @return BLE Mesh transmit value that can be used e.g. for the default
* values of the Configuration Model data.
*/
#define ESP_BLE_MESH_TRANSMIT(count, int_ms) ((count) | (((int_ms / 10) - 1) << 3))
/** @def ESP_BLE_MESH_GET_TRANSMIT_COUNT
*
* @brief Decode transmit count from a transmit value.
*
* @param transmit Encoded transmit count & interval value.
*
* @return Transmission count (actual transmissions equal to N + 1).
*/
#define ESP_BLE_MESH_GET_TRANSMIT_COUNT(transmit) (((transmit) & (uint8_t)BIT_MASK(3)))
/** @def ESP_BLE_MESH_GET_TRANSMIT_INTERVAL
*
* @brief Decode transmit interval from a transmit value.
*
* @param transmit Encoded transmit count & interval value.
*
* @return Transmission interval in milliseconds.
*/
#define ESP_BLE_MESH_GET_TRANSMIT_INTERVAL(transmit) ((((transmit) >> 3) + 1) * 10)
/** @def ESP_BLE_MESH_PUBLISH_TRANSMIT
*
* @brief Encode Publish Retransmit count & interval steps.
*
* @param count Number of retransmissions (first transmission is excluded).
* @param int_ms Interval steps in milliseconds. Must be greater than 0
* and a multiple of 50.
*
* @return BLE Mesh transmit value that can be used e.g. for the default
* values of the Configuration Model data.
*/
#define ESP_BLE_MESH_PUBLISH_TRANSMIT(count, int_ms) ESP_BLE_MESH_TRANSMIT(count, (int_ms) / 5)
/** @def ESP_BLE_MESH_GET_PUBLISH_TRANSMIT_COUNT
*
* @brief Decode Publish Retransmit count from a given value.
*
* @param transmit Encoded Publish Retransmit count & interval value.
*
* @return Retransmission count (actual transmissions equal to N + 1).
*/
#define ESP_BLE_MESH_GET_PUBLISH_TRANSMIT_COUNT(transmit) ESP_BLE_MESH_GET_TRANSMIT_COUNT(transmit)
/** @def ESP_BLE_MESH_GET_PUBLISH_TRANSMIT_INTERVAL
*
* @brief Decode Publish Retransmit interval from a given value.
*
* @param transmit Encoded Publish Retransmit count & interval value.
*
* @return Transmission interval in milliseconds.
*/
#define ESP_BLE_MESH_GET_PUBLISH_TRANSMIT_INTERVAL(transmit) ((((transmit) >> 3) + 1) * 50)
/*!< Callbacks which are not needed to be initialized by users (set with 0 and will be initialized internally) */
typedef uint32_t esp_ble_mesh_cb_t;
typedef enum {
ESP_BLE_MESH_TYPE_PROV_CB,
ESP_BLE_MESH_TYPE_OUTPUT_NUM_CB,
ESP_BLE_MESH_TYPE_OUTPUT_STR_CB,
ESP_BLE_MESH_TYPE_INTPUT_CB,
ESP_BLE_MESH_TYPE_LINK_OPEN_CB,
ESP_BLE_MESH_TYPE_LINK_CLOSE_CB,
ESP_BLE_MESH_TYPE_COMPLETE_CB,
ESP_BLE_MESH_TYPE_RESET_CB,
} esp_ble_mesh_cb_type_t;
/*!< This enum value is provisioning authentication oob method */
typedef enum {
ESP_BLE_MESH_NO_OOB,
ESP_BLE_MESH_STATIC_OOB,
ESP_BLE_MESH_OUTPUT_OOB,
ESP_BLE_MESH_INPUT_OOB,
} esp_ble_mesh_oob_method_t;
/*!< This enum value is associated with bt_mesh_output_action_t in mesh_main.h */
typedef enum {
ESP_BLE_MESH_NO_OUTPUT = 0,
ESP_BLE_MESH_BLINK = BIT(0),
ESP_BLE_MESH_BEEP = BIT(1),
ESP_BLE_MESH_VIBRATE = BIT(2),
ESP_BLE_MESH_DISPLAY_NUMBER = BIT(3),
ESP_BLE_MESH_DISPLAY_STRING = BIT(4),
} esp_ble_mesh_output_action_t;
/*!< This enum value is associated with bt_mesh_input_action_t in mesh_main.h */
typedef enum {
ESP_BLE_MESH_NO_INPUT = 0,
ESP_BLE_MESH_PUSH = BIT(0),
ESP_BLE_MESH_TWIST = BIT(1),
ESP_BLE_MESH_ENTER_NUMBER = BIT(2),
ESP_BLE_MESH_ENTER_STRING = BIT(3),
} esp_ble_mesh_input_action_t;
/*!< This enum value is associated with bt_mesh_prov_bearer_t in mesh_main.h */
typedef enum {
ESP_BLE_MESH_PROV_ADV = BIT(0),
ESP_BLE_MESH_PROV_GATT = BIT(1),
} esp_ble_mesh_prov_bearer_t;
/*!< This enum value is associated with bt_mesh_prov_oob_info_t in mesh_main.h */
typedef enum {
ESP_BLE_MESH_PROV_OOB_OTHER = BIT(0),
ESP_BLE_MESH_PROV_OOB_URI = BIT(1),
ESP_BLE_MESH_PROV_OOB_2D_CODE = BIT(2),
ESP_BLE_MESH_PROV_OOB_BAR_CODE = BIT(3),
ESP_BLE_MESH_PROV_OOB_NFC = BIT(4),
ESP_BLE_MESH_PROV_OOB_NUMBER = BIT(5),
ESP_BLE_MESH_PROV_OOB_STRING = BIT(6),
/* 7 - 10 are reserved */
ESP_BLE_MESH_PROV_OOB_ON_BOX = BIT(11),
ESP_BLE_MESH_PROV_OOB_IN_BOX = BIT(12),
ESP_BLE_MESH_PROV_OOB_ON_PAPER = BIT(13),
ESP_BLE_MESH_PROV_OOB_IN_MANUAL = BIT(14),
ESP_BLE_MESH_PROV_OOB_ON_DEV = BIT(15),
} esp_ble_mesh_prov_oob_info_t;
/*!< Maximum length of value used by Static OOB authentication */
#define ESP_BLE_MESH_PROV_STATIC_OOB_MAX_LEN 16
/*!< Maximum length of string used by Output OOB authentication */
#define ESP_BLE_MESH_PROV_OUTPUT_OOB_MAX_LEN 8
/*!< Maximum length of string used by Output OOB authentication */
#define ESP_BLE_MESH_PROV_INPUT_OOB_MAX_LEN 8
/*!< Macros used to define message opcode */
#define ESP_BLE_MESH_MODEL_OP_1(b0) (b0)
#define ESP_BLE_MESH_MODEL_OP_2(b0, b1) (((b0) << 8) | (b1))
#define ESP_BLE_MESH_MODEL_OP_3(b0, cid) ((((b0) << 16) | 0xC00000) | (cid))
/*!< This macro is associated with BLE_MESH_MODEL_CB in mesh_access.h */
#define ESP_BLE_MESH_SIG_MODEL(_id, _op, _pub, _user_data) \
{ \
.model_id = (_id), \
.pub = _pub, \
.keys = { \
ESP_BLE_MESH_KEY_UNUSED, \
ESP_BLE_MESH_KEY_UNUSED, \
ESP_BLE_MESH_KEY_UNUSED, \
}, \
.groups = { \
ESP_BLE_MESH_ADDR_UNASSIGNED, \
ESP_BLE_MESH_ADDR_UNASSIGNED, \
ESP_BLE_MESH_ADDR_UNASSIGNED, \
}, \
.op = _op, \
.user_data = _user_data, \
}
/*!< This macro is associated with BLE_MESH_MODEL_VND_CB in mesh_access.h */
#define ESP_BLE_MESH_VENDOR_MODEL(_company, _id, _op, _pub, _user_data) \
{ \
.vnd.company_id = (_company), \
.vnd.model_id = (_id), \
.pub = _pub, \
.keys = { \
ESP_BLE_MESH_KEY_UNUSED, \
ESP_BLE_MESH_KEY_UNUSED, \
ESP_BLE_MESH_KEY_UNUSED, \
}, \
.groups = { \
ESP_BLE_MESH_ADDR_UNASSIGNED, \
ESP_BLE_MESH_ADDR_UNASSIGNED, \
ESP_BLE_MESH_ADDR_UNASSIGNED, \
}, \
.op = _op, \
.user_data = _user_data, \
}
/** @brief Helper to define a BLE Mesh element within an array.
*
* In case the element has no SIG or Vendor models, the helper
* macro ESP_BLE_MESH_MODEL_NONE can be given instead.
*
* @note This macro is associated with BLE_MESH_ELEM in mesh_access.h
*
* @param _loc Location Descriptor.
* @param _mods Array of SIG models.
* @param _vnd_mods Array of vendor models.
*/
#define ESP_BLE_MESH_ELEMENT(_loc, _mods, _vnd_mods) \
{ \
.location = (_loc), \
.sig_model_count = ARRAY_SIZE(_mods), \
.vnd_model_count = ARRAY_SIZE(_vnd_mods), \
.sig_models = (_mods), \
.vnd_models = (_vnd_mods), \
}
#define ESP_BLE_MESH_PROV(uuid, sta_val, sta_val_len, out_size, out_act, in_size, in_act) { \
.uuid = uuid, \
.static_val = sta_val, \
.static_val_len = sta_val_len, \
.output_size = out_size, \
.output_action = out_act, \
.input_size = in_size, \
.input_action = in_act, \
}
typedef uint8_t UINT8;
typedef uint16_t UINT16;
typedef uint32_t UINT32;
typedef uint64_t UINT64;
#define BT_OCTET32_LEN 32
typedef UINT8 BT_OCTET32[BT_OCTET32_LEN]; /* octet array: size 32 */
#ifndef BD_ADDR_LEN
#define BD_ADDR_LEN 6
typedef uint8_t BD_ADDR[BD_ADDR_LEN];
#endif
typedef uint8_t esp_ble_mesh_bd_addr_t[BD_ADDR_LEN];
#define ESP_BLE_MESH_ADDR_TYPE_PUBLIC 0x00
#define ESP_BLE_MESH_ADDR_TYPE_RANDOM 0x01
#define ESP_BLE_MESH_ADDR_TYPE_RPA_PUBLIC 0x02
#define ESP_BLE_MESH_ADDR_TYPE_RPA_RANDOM 0x03
/// BLE device address type
typedef uint8_t esp_ble_mesh_addr_type_t;
/** BLE Mesh deinit parameters */
typedef struct {
bool erase_flash; /*!< Indicate if erasing flash when deinit mesh stack */
} esp_ble_mesh_deinit_param_t;
typedef struct esp_ble_mesh_model esp_ble_mesh_model_t;
/** Abstraction that describes a BLE Mesh Element.
* This structure is associated with struct bt_mesh_elem in mesh_access.h
*/
typedef struct {
/** Element Address, assigned during provisioning. */
uint16_t element_addr;
/** Location Descriptor (GATT Bluetooth Namespace Descriptors) */
const uint16_t location;
const uint8_t sig_model_count; /*!< SIG Model count */
const uint8_t vnd_model_count; /*!< Vendor Model count */
esp_ble_mesh_model_t *sig_models; /*!< SIG Models */
esp_ble_mesh_model_t *vnd_models; /*!< Vendor Models */
} esp_ble_mesh_elem_t;
/** Abstraction that describes a model publication context.
* This structure is associated with struct bt_mesh_model_pub in mesh_access.h
*/
typedef struct {
/** Pointer to the model to which the context belongs. Initialized by the stack. */
esp_ble_mesh_model_t *model;
uint16_t publish_addr; /*!< Publish Address. */
uint16_t app_idx:12, /*!< Publish AppKey Index. */
cred:1, /*!< Friendship Credentials Flag. */
send_rel:1; /*!< Force reliable sending (segment acks) */
uint8_t ttl; /*!< Publish Time to Live. */
uint8_t retransmit; /*!< Retransmit Count & Interval Steps. */
uint8_t period; /*!< Publish Period. */
uint8_t period_div:4, /*!< Divisor for the Period. */
fast_period:1, /*!< Use FastPeriodDivisor */
count:3; /*!< Retransmissions left. */
uint32_t period_start; /*!< Start of the current period. */
/** @brief Publication buffer, containing the publication message.
*
* This will get correctly created when the publication context
* has been defined using the ESP_BLE_MESH_MODEL_PUB_DEFINE macro.
*
* ESP_BLE_MESH_MODEL_PUB_DEFINE(name, size);
*/
struct net_buf_simple *msg;
/** Callback used to update publish message. Initialized by the stack. */
esp_ble_mesh_cb_t update;
/** Publish Period Timer. Initialized by the stack. */
struct k_delayed_work timer;
/** Role of the device that is going to publish messages */
uint8_t dev_role;
} esp_ble_mesh_model_pub_t;
/** @def ESP_BLE_MESH_MODEL_PUB_DEFINE
*
* Define a model publication context.
*
* @param _name Variable name given to the context.
* @param _msg_len Length of the publication message.
* @param _role Role of the device which contains the model.
*/
#define ESP_BLE_MESH_MODEL_PUB_DEFINE(_name, _msg_len, _role) \
NET_BUF_SIMPLE_DEFINE_STATIC(bt_mesh_pub_msg_##_name, _msg_len); \
static esp_ble_mesh_model_pub_t _name = { \
.msg = &bt_mesh_pub_msg_##_name, \
.update = (uint32_t)NULL, \
.dev_role = _role, \
}
/** @def ESP_BLE_MESH_MODEL_OP
*
* Define a model operation context.
*
* @param _opcode Message opcode.
* @param _min_len Message minimum length.
*/
#define ESP_BLE_MESH_MODEL_OP(_opcode, _min_len) \
{ \
.opcode = _opcode, \
.min_len = _min_len, \
.param_cb = (uint32_t)NULL, \
}
/** Abstraction that describes a model operation context.
* This structure is associated with struct bt_mesh_model_op in mesh_access.h
*/
typedef struct {
const uint32_t opcode; /*!< Message opcode */
const size_t min_len; /*!< Message minimum length */
esp_ble_mesh_cb_t param_cb; /*!< Callback used to handle message. Initialized by the stack. */
} esp_ble_mesh_model_op_t;
/** Define the terminator for the model operation table.
* Each model operation struct array must use this terminator as
* the end tag of the operation unit.
*/
#define ESP_BLE_MESH_MODEL_OP_END {0, 0, 0}
/** Abstraction that describes a model callback structure.
* This structure is associated with struct bt_mesh_model_cb in mesh_access.h.
*/
typedef struct {
/** Callback used during model initialization. Initialized by the stack. */
esp_ble_mesh_cb_t init_cb;
#if CONFIG_BLE_MESH_DEINIT
/** Callback used during model deinitialization. Initialized by the stack. */
esp_ble_mesh_cb_t deinit_cb;
#endif /* CONFIG_BLE_MESH_DEINIT */
} esp_ble_mesh_model_cbs_t;
/** Abstraction that describes a Mesh Model instance.
* This structure is associated with struct bt_mesh_model in mesh_access.h
*/
struct esp_ble_mesh_model {
/** Model ID */
union {
const uint16_t model_id; /*!< 16-bit model identifier */
struct {
uint16_t company_id; /*!< 16-bit company identifier */
uint16_t model_id; /*!< 16-bit model identifier */
} vnd; /*!< Structure encapsulating a model ID with a company ID */
};
/** Internal information, mainly for persistent storage */
uint8_t element_idx; /*!< Belongs to Nth element */
uint8_t model_idx; /*!< Is the Nth model in the element */
uint16_t flags; /*!< Information about what has changed */
/** The Element to which this Model belongs */
esp_ble_mesh_elem_t *element;
/** Model Publication */
esp_ble_mesh_model_pub_t *const pub;
/** AppKey List */
uint16_t keys[CONFIG_BLE_MESH_MODEL_KEY_COUNT];
/** Subscription List (group or virtual addresses) */
uint16_t groups[CONFIG_BLE_MESH_MODEL_GROUP_COUNT];
/** Model operation context */
esp_ble_mesh_model_op_t *op;
/** Model callback structure */
esp_ble_mesh_model_cbs_t *cb;
/** Model-specific user data */
void *user_data;
};
/** Helper to define an empty model array.
* This structure is associated with BLE_MESH_MODEL_NONE in mesh_access.h
*/
#define ESP_BLE_MESH_MODEL_NONE ((esp_ble_mesh_model_t []){})
/** Message sending context.
* This structure is associated with struct bt_mesh_msg_ctx in mesh_access.h
*/
typedef struct {
/** NetKey Index of the subnet through which to send the message. */
uint16_t net_idx;
/** AppKey Index for message encryption. */
uint16_t app_idx;
/** Remote address. */
uint16_t addr;
/** Destination address of a received message. Not used for sending. */
uint16_t recv_dst;
/** RSSI of received packet. Not used for sending. */
int8_t recv_rssi;
/** Received TTL value. Not used for sending. */
uint8_t recv_ttl: 7;
/** Force sending reliably by using segment acknowledgement */
uint8_t send_rel: 1;
/** TTL, or ESP_BLE_MESH_TTL_DEFAULT for default TTL. */
uint8_t send_ttl;
/** Opcode of a received message. Not used for sending message. */
uint32_t recv_op;
/** Model corresponding to the message, no need to be initialized before sending message */
esp_ble_mesh_model_t *model;
/** Indicate if the message is sent by a node server model, no need to be initialized before sending message */
bool srv_send;
} esp_ble_mesh_msg_ctx_t;
/** Provisioning properties & capabilities.
* This structure is associated with struct bt_mesh_prov in mesh_access.h
*/
typedef struct {
#if CONFIG_BLE_MESH_NODE
/** The UUID that is used when advertising as an unprovisioned device */
const uint8_t *uuid;
/** Optional URI. This will be advertised separately from the
* unprovisioned beacon, however the unprovisioned beacon will
* contain a hash of it so the two can be associated by the
* provisioner.
*/
const char *uri;
/** Out of Band information field. */
esp_ble_mesh_prov_oob_info_t oob_info;
/* NOTE: In order to avoid suffering brute-forcing attack (CVE-2020-26559).
* The Bluetooth SIG recommends that potentially vulnerable mesh provisioners
* support an out-of-band mechanism to exchange the public keys.
* So as an unprovisioned device, it should enable this flag to support
* using an out-of-band mechanism to exchange Public Key.
*/
/** Flag indicates whether unprovisioned devices support OOB public key */
bool oob_pub_key;
/** Callback used to notify to set OOB Public Key. Initialized by the stack. */
esp_ble_mesh_cb_t oob_pub_key_cb;
/** Static OOB value */
const uint8_t *static_val;
/** Static OOB value length */
uint8_t static_val_len;
/** Maximum size of Output OOB supported */
uint8_t output_size;
/** Supported Output OOB Actions */
uint16_t output_actions;
/** Maximum size of Input OOB supported */
uint8_t input_size;
/** Supported Input OOB Actions */
uint16_t input_actions;
/** Callback used to output the number. Initialized by the stack. */
esp_ble_mesh_cb_t output_num_cb;
/** Callback used to output the string. Initialized by the stack. */
esp_ble_mesh_cb_t output_str_cb;
/** Callback used to notify to input number/string. Initialized by the stack. */
esp_ble_mesh_cb_t input_cb;
/** Callback used to indicate that link is opened. Initialized by the stack. */
esp_ble_mesh_cb_t link_open_cb;
/** Callback used to indicate that link is closed. Initialized by the stack. */
esp_ble_mesh_cb_t link_close_cb;
/** Callback used to indicate that provisioning is completed. Initialized by the stack. */
esp_ble_mesh_cb_t complete_cb;
/** Callback used to indicate that node has been reset. Initialized by the stack. */
esp_ble_mesh_cb_t reset_cb;
#endif /* CONFIG_BLE_MESH_NODE */
#ifdef CONFIG_BLE_MESH_PROVISIONER
/** Provisioner device UUID */
const uint8_t *prov_uuid;
/** Primary element address of the provisioner */
const uint16_t prov_unicast_addr;
/** Pre-incremental unicast address value to be assigned to the first device */
uint16_t prov_start_address;
/** Attention timer contained in Provisioning Invite PDU */
uint8_t prov_attention;
/** Provisioning Algorithm for the Provisioner */
uint8_t prov_algorithm;
/* NOTE: In order to avoid suffering brute-forcing attack (CVE-2020-26559).
* The Bluetooth SIG recommends that potentially vulnerable mesh provisioners
* use an out-of-band mechanism to exchange the public keys.
*/
/** Provisioner public key oob */
uint8_t prov_pub_key_oob;
/** Callback used to notify to set device OOB Public Key. Initialized by the stack. */
esp_ble_mesh_cb_t provisioner_prov_read_oob_pub_key;
/* NOTE: The Bluetooth SIG recommends that mesh implementations enforce a randomly
* selected AuthValue using all of the available bits, where permitted by the
* implementation. A large entropy helps ensure that a brute-force of the AuthValue,
* even a static AuthValue, cannot normally be completed in a reasonable time (CVE-2020-26557).
*
* AuthValues selected using a cryptographically secure random or pseudorandom number
* generator and having the maximum permitted entropy (128-bits) will be most difficult
* to brute-force. AuthValues with reduced entropy or generated in a predictable manner
* will not grant the same level of protection against this vulnerability. Selecting a
* new AuthValue with each provisioning attempt can also make it more difficult to launch
* a brute-force attack by requiring the attacker to restart the search with each
* provisioning attempt (CVE-2020-26556).
*/
/** Provisioner static oob value */
uint8_t *prov_static_oob_val;
/** Provisioner static oob value length */
uint8_t prov_static_oob_len;
/** Callback used to notify to input number/string. Initialized by the stack. */
esp_ble_mesh_cb_t provisioner_prov_input;
/** Callback used to output number/string. Initialized by the stack. */
esp_ble_mesh_cb_t provisioner_prov_output;
/** Key refresh and IV update flag */
uint8_t flags;
/** IV index */
uint32_t iv_index;
/** Callback used to indicate that link is opened. Initialized by the stack. */
esp_ble_mesh_cb_t provisioner_link_open;
/** Callback used to indicate that link is closed. Initialized by the stack. */
esp_ble_mesh_cb_t provisioner_link_close;
/** Callback used to indicate that a device is provisioned. Initialized by the stack. */
esp_ble_mesh_cb_t provisioner_prov_comp;
#endif /* CONFIG_BLE_MESH_PROVISIONER */
} esp_ble_mesh_prov_t;
/** Node Composition data context.
* This structure is associated with struct bt_mesh_comp in mesh_access.h
*/
typedef struct {
uint16_t cid; /*!< 16-bit SIG-assigned company identifier */
uint16_t pid; /*!< 16-bit vendor-assigned product identifier */
uint16_t vid; /*!< 16-bit vendor-assigned product version identifier */
size_t element_count; /*!< Element count */
esp_ble_mesh_elem_t *elements; /*!< A sequence of elements */
} esp_ble_mesh_comp_t;
/*!< This enum value is the role of the device */
typedef enum {
ROLE_NODE = 0,
ROLE_PROVISIONER,
ROLE_FAST_PROV,
} esp_ble_mesh_dev_role_t;
/*!< Flag which will be set when device is going to be added. */
typedef uint8_t esp_ble_mesh_dev_add_flag_t;
#define ADD_DEV_RM_AFTER_PROV_FLAG BIT(0) /*!< Device will be removed from queue after provisioned successfully */
#define ADD_DEV_START_PROV_NOW_FLAG BIT(1) /*!< Start provisioning device immediately */
#define ADD_DEV_FLUSHABLE_DEV_FLAG BIT(2) /*!< Device can be remove when queue is full and new device is going to added */
/** Information of the device which is going to be added for provisioning. */
typedef struct {
esp_ble_mesh_bd_addr_t addr; /*!< Device address */
esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */
uint8_t uuid[16]; /*!< Device UUID */
uint16_t oob_info; /*!< Device OOB Info */
/*!< ADD_DEV_START_PROV_NOW_FLAG shall not be set if the bearer has both PB-ADV and PB-GATT enabled */
esp_ble_mesh_prov_bearer_t bearer; /*!< Provisioning Bearer */
} esp_ble_mesh_unprov_dev_add_t;
#define DEL_DEV_ADDR_FLAG BIT(0)
#define DEL_DEV_UUID_FLAG BIT(1)
/** Information of the device which is going to be deleted. */
typedef struct {
union {
struct {
esp_ble_mesh_bd_addr_t addr; /*!< Device address */
esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */
};
uint8_t uuid[16]; /*!< Device UUID */
};
uint8_t flag; /*!< BIT0: device address; BIT1: device UUID */
} esp_ble_mesh_device_delete_t;
#define PROV_DATA_NET_IDX_FLAG BIT(0)
#define PROV_DATA_FLAGS_FLAG BIT(1)
#define PROV_DATA_IV_INDEX_FLAG BIT(2)
/** Information of the provisioner which is going to be updated. */
typedef struct {
union {
uint16_t net_idx; /*!< NetKey Index */
uint8_t flags; /*!< Flags */
uint32_t iv_index; /*!< IV Index */
};
uint8_t flag; /*!< BIT0: net_idx; BIT1: flags; BIT2: iv_index */
} esp_ble_mesh_prov_data_info_t;
/** Information of the provisioned node */
typedef struct {
/* Device information */
esp_ble_mesh_bd_addr_t addr; /*!< Node device address */
esp_ble_mesh_addr_type_t addr_type; /*!< Node device address type */
uint8_t dev_uuid[16]; /*!< Device UUID */
uint16_t oob_info; /*!< Node OOB information */
/* Provisioning information */
uint16_t unicast_addr; /*!< Node unicast address */
uint8_t element_num; /*!< Node element number */
uint16_t net_idx; /*!< Node NetKey Index */
uint8_t flags; /*!< Node key refresh flag and iv update flag */
uint32_t iv_index; /*!< Node IV Index */
uint8_t dev_key[16]; /*!< Node device key */
/* Additional information */
char name[ESP_BLE_MESH_NODE_NAME_MAX_LEN + 1]; /*!< Node name */
uint16_t comp_length; /*!< Length of Composition Data */
uint8_t *comp_data; /*!< Value of Composition Data */
} __attribute__((packed)) esp_ble_mesh_node_t;
/** Context of fast provisioning which need to be set. */
typedef struct {
uint16_t unicast_min; /*!< Minimum unicast address used for fast provisioning */
uint16_t unicast_max; /*!< Maximum unicast address used for fast provisioning */
uint16_t net_idx; /*!< Netkey index used for fast provisioning */
uint8_t flags; /*!< Flags used for fast provisioning */
uint32_t iv_index; /*!< IV Index used for fast provisioning */
uint8_t offset; /*!< Offset of the UUID to be compared */
uint8_t match_len; /*!< Length of the UUID to be compared */
uint8_t match_val[16]; /*!< Value of UUID to be compared */
} esp_ble_mesh_fast_prov_info_t;
/*!< This enum value is the action of fast provisioning */
typedef enum {
FAST_PROV_ACT_NONE,
FAST_PROV_ACT_ENTER,
FAST_PROV_ACT_SUSPEND,
FAST_PROV_ACT_EXIT,
FAST_PROV_ACT_MAX,
} esp_ble_mesh_fast_prov_action_t;
/*!< This enum value is the type of proxy filter */
typedef enum {
PROXY_FILTER_WHITELIST,
PROXY_FILTER_BLACKLIST,
} esp_ble_mesh_proxy_filter_type_t;
/*!< Provisioner heartbeat filter type */
#define ESP_BLE_MESH_HEARTBEAT_FILTER_ACCEPTLIST 0x00
#define ESP_BLE_MESH_HEARTBEAT_FILTER_REJECTLIST 0x01
/*!< Provisioner heartbeat filter operation */
#define ESP_BLE_MESH_HEARTBEAT_FILTER_ADD 0x00
#define ESP_BLE_MESH_HEARTBEAT_FILTER_REMOVE 0x01
/** Context of Provisioner heartbeat filter information to be set */
typedef struct {
uint16_t hb_src; /*!< Heartbeat source address (unicast address) */
uint16_t hb_dst; /*!< Heartbeat destination address (unicast address or group address) */
} esp_ble_mesh_heartbeat_filter_info_t;
/*!< This enum value is the event of node/provisioner/fast provisioning */
typedef enum {
ESP_BLE_MESH_PROV_REGISTER_COMP_EVT, /*!< Initialize BLE Mesh provisioning capabilities and internal data information completion event */
ESP_BLE_MESH_NODE_SET_UNPROV_DEV_NAME_COMP_EVT, /*!< Set the unprovisioned device name completion event */
ESP_BLE_MESH_NODE_PROV_ENABLE_COMP_EVT, /*!< Enable node provisioning functionality completion event */
ESP_BLE_MESH_NODE_PROV_DISABLE_COMP_EVT, /*!< Disable node provisioning functionality completion event */
ESP_BLE_MESH_NODE_PROV_LINK_OPEN_EVT, /*!< Establish a BLE Mesh link event */
ESP_BLE_MESH_NODE_PROV_LINK_CLOSE_EVT, /*!< Close a BLE Mesh link event */
ESP_BLE_MESH_NODE_PROV_OOB_PUB_KEY_EVT, /*!< Generate Node input OOB public key event */
ESP_BLE_MESH_NODE_PROV_OUTPUT_NUMBER_EVT, /*!< Generate Node Output Number event */
ESP_BLE_MESH_NODE_PROV_OUTPUT_STRING_EVT, /*!< Generate Node Output String event */
ESP_BLE_MESH_NODE_PROV_INPUT_EVT, /*!< Event requiring the user to input a number or string */
ESP_BLE_MESH_NODE_PROV_COMPLETE_EVT, /*!< Provisioning done event */
ESP_BLE_MESH_NODE_PROV_RESET_EVT, /*!< Provisioning reset event */
ESP_BLE_MESH_NODE_PROV_SET_OOB_PUB_KEY_COMP_EVT, /*!< Node set oob public key completion event */
ESP_BLE_MESH_NODE_PROV_INPUT_NUMBER_COMP_EVT, /*!< Node input number completion event */
ESP_BLE_MESH_NODE_PROV_INPUT_STRING_COMP_EVT, /*!< Node input string completion event */
ESP_BLE_MESH_NODE_PROXY_IDENTITY_ENABLE_COMP_EVT, /*!< Enable BLE Mesh Proxy Identity advertising completion event */
ESP_BLE_MESH_NODE_PROXY_GATT_ENABLE_COMP_EVT, /*!< Enable BLE Mesh GATT Proxy Service completion event */
ESP_BLE_MESH_NODE_PROXY_GATT_DISABLE_COMP_EVT, /*!< Disable BLE Mesh GATT Proxy Service completion event */
ESP_BLE_MESH_NODE_ADD_LOCAL_NET_KEY_COMP_EVT, /*!< Node add NetKey locally completion event */
ESP_BLE_MESH_NODE_ADD_LOCAL_APP_KEY_COMP_EVT, /*!< Node add AppKey locally completion event */
ESP_BLE_MESH_NODE_BIND_APP_KEY_TO_MODEL_COMP_EVT, /*!< Node bind AppKey to model locally completion event */
ESP_BLE_MESH_PROVISIONER_PROV_ENABLE_COMP_EVT, /*!< Provisioner enable provisioning functionality completion event */
ESP_BLE_MESH_PROVISIONER_PROV_DISABLE_COMP_EVT, /*!< Provisioner disable provisioning functionality completion event */
ESP_BLE_MESH_PROVISIONER_RECV_UNPROV_ADV_PKT_EVT, /*!< Provisioner receives unprovisioned device beacon event */
ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_EVT, /*!< Provisioner read unprovisioned device OOB public key event */
ESP_BLE_MESH_PROVISIONER_PROV_INPUT_EVT, /*!< Provisioner input value for provisioning procedure event */
ESP_BLE_MESH_PROVISIONER_PROV_OUTPUT_EVT, /*!< Provisioner output value for provisioning procedure event */
ESP_BLE_MESH_PROVISIONER_PROV_LINK_OPEN_EVT, /*!< Provisioner establish a BLE Mesh link event */
ESP_BLE_MESH_PROVISIONER_PROV_LINK_CLOSE_EVT, /*!< Provisioner close a BLE Mesh link event */
ESP_BLE_MESH_PROVISIONER_PROV_COMPLETE_EVT, /*!< Provisioner provisioning done event */
ESP_BLE_MESH_PROVISIONER_ADD_UNPROV_DEV_COMP_EVT, /*!< Provisioner add a device to the list which contains devices that are waiting/going to be provisioned completion event */
ESP_BLE_MESH_PROVISIONER_PROV_DEV_WITH_ADDR_COMP_EVT, /*!< Provisioner start to provision an unprovisioned device completion event */
ESP_BLE_MESH_PROVISIONER_DELETE_DEV_COMP_EVT, /*!< Provisioner delete a device from the list, close provisioning link with the device completion event */
ESP_BLE_MESH_PROVISIONER_SET_DEV_UUID_MATCH_COMP_EVT, /*!< Provisioner set the value to be compared with part of the unprovisioned device UUID completion event */
ESP_BLE_MESH_PROVISIONER_SET_PROV_DATA_INFO_COMP_EVT, /*!< Provisioner set net_idx/flags/iv_index used for provisioning completion event */
ESP_BLE_MESH_PROVISIONER_SET_STATIC_OOB_VALUE_COMP_EVT, /*!< Provisioner set static oob value used for provisioning completion event */
ESP_BLE_MESH_PROVISIONER_SET_PRIMARY_ELEM_ADDR_COMP_EVT, /*!< Provisioner set unicast address of primary element completion event */
ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_COMP_EVT, /*!< Provisioner read unprovisioned device OOB public key completion event */
ESP_BLE_MESH_PROVISIONER_PROV_INPUT_NUMBER_COMP_EVT, /*!< Provisioner input number completion event */
ESP_BLE_MESH_PROVISIONER_PROV_INPUT_STRING_COMP_EVT, /*!< Provisioner input string completion event */
ESP_BLE_MESH_PROVISIONER_SET_NODE_NAME_COMP_EVT, /*!< Provisioner set node name completion event */
ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_APP_KEY_COMP_EVT, /*!< Provisioner add local app key completion event */
ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_APP_KEY_COMP_EVT, /*!< Provisioner update local app key completion event */
ESP_BLE_MESH_PROVISIONER_BIND_APP_KEY_TO_MODEL_COMP_EVT, /*!< Provisioner bind local model with local app key completion event */
ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_NET_KEY_COMP_EVT, /*!< Provisioner add local network key completion event */
ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_NET_KEY_COMP_EVT, /*!< Provisioner update local network key completion event */
ESP_BLE_MESH_PROVISIONER_STORE_NODE_COMP_DATA_COMP_EVT, /*!< Provisioner store node composition data completion event */
ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_UUID_COMP_EVT, /*!< Provisioner delete node with uuid completion event */
ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_ADDR_COMP_EVT, /*!< Provisioner delete node with unicast address completion event */
ESP_BLE_MESH_PROVISIONER_ENABLE_HEARTBEAT_RECV_COMP_EVT, /*!< Provisioner start to receive heartbeat message completion event */
ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_TYPE_COMP_EVT, /*!< Provisioner set the heartbeat filter type completion event */
ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_INFO_COMP_EVT, /*!< Provisioner set the heartbeat filter information completion event */
ESP_BLE_MESH_PROVISIONER_RECV_HEARTBEAT_MESSAGE_EVT, /*!< Provisioner receive heartbeat message event */
ESP_BLE_MESH_PROVISIONER_DIRECT_ERASE_SETTINGS_COMP_EVT, /*!< Provisioner directly erase settings completion event */
ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_INDEX_COMP_EVT, /*!< Provisioner open settings with index completion event */
ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_UID_COMP_EVT, /*!< Provisioner open settings with user id completion event */
ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_INDEX_COMP_EVT, /*!< Provisioner close settings with index completion event */
ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_UID_COMP_EVT, /*!< Provisioner close settings with user id completion event */
ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_INDEX_COMP_EVT, /*!< Provisioner delete settings with index completion event */
ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_UID_COMP_EVT, /*!< Provisioner delete settings with user id completion event */
ESP_BLE_MESH_SET_FAST_PROV_INFO_COMP_EVT, /*!< Set fast provisioning information (e.g. unicast address range, net_idx, etc.) completion event */
ESP_BLE_MESH_SET_FAST_PROV_ACTION_COMP_EVT, /*!< Set fast provisioning action completion event */
ESP_BLE_MESH_HEARTBEAT_MESSAGE_RECV_EVT, /*!< Receive Heartbeat message event */
ESP_BLE_MESH_LPN_ENABLE_COMP_EVT, /*!< Enable Low Power Node completion event */
ESP_BLE_MESH_LPN_DISABLE_COMP_EVT, /*!< Disable Low Power Node completion event */
ESP_BLE_MESH_LPN_POLL_COMP_EVT, /*!< Low Power Node send Friend Poll completion event */
ESP_BLE_MESH_LPN_FRIENDSHIP_ESTABLISH_EVT, /*!< Low Power Node establishes friendship event */
ESP_BLE_MESH_LPN_FRIENDSHIP_TERMINATE_EVT, /*!< Low Power Node terminates friendship event */
ESP_BLE_MESH_FRIEND_FRIENDSHIP_ESTABLISH_EVT, /*!< Friend Node establishes friendship event */
ESP_BLE_MESH_FRIEND_FRIENDSHIP_TERMINATE_EVT, /*!< Friend Node terminates friendship event */
ESP_BLE_MESH_PROXY_CLIENT_RECV_ADV_PKT_EVT, /*!< Proxy Client receives Network ID advertising packet event */
ESP_BLE_MESH_PROXY_CLIENT_CONNECTED_EVT, /*!< Proxy Client establishes connection successfully event */
ESP_BLE_MESH_PROXY_CLIENT_DISCONNECTED_EVT, /*!< Proxy Client terminates connection successfully event */
ESP_BLE_MESH_PROXY_CLIENT_RECV_FILTER_STATUS_EVT, /*!< Proxy Client receives Proxy Filter Status event */
ESP_BLE_MESH_PROXY_CLIENT_CONNECT_COMP_EVT, /*!< Proxy Client connect completion event */
ESP_BLE_MESH_PROXY_CLIENT_DISCONNECT_COMP_EVT, /*!< Proxy Client disconnect completion event */
ESP_BLE_MESH_PROXY_CLIENT_SET_FILTER_TYPE_COMP_EVT, /*!< Proxy Client set filter type completion event */
ESP_BLE_MESH_PROXY_CLIENT_ADD_FILTER_ADDR_COMP_EVT, /*!< Proxy Client add filter address completion event */
ESP_BLE_MESH_PROXY_CLIENT_REMOVE_FILTER_ADDR_COMP_EVT, /*!< Proxy Client remove filter address completion event */
ESP_BLE_MESH_PROXY_SERVER_CONNECTED_EVT, /*!< Proxy Server establishes connection successfully event */
ESP_BLE_MESH_PROXY_SERVER_DISCONNECTED_EVT, /*!< Proxy Server terminates connection successfully event */
ESP_BLE_MESH_MODEL_SUBSCRIBE_GROUP_ADDR_COMP_EVT, /*!< Local model subscribes group address completion event */
ESP_BLE_MESH_MODEL_UNSUBSCRIBE_GROUP_ADDR_COMP_EVT, /*!< Local model unsubscribes group address completion event */
ESP_BLE_MESH_DEINIT_MESH_COMP_EVT, /*!< De-initialize BLE Mesh stack completion event */
ESP_BLE_MESH_PROV_EVT_MAX,
} esp_ble_mesh_prov_cb_event_t;
/**
* @brief BLE Mesh Node/Provisioner callback parameters union
*/
typedef union {
/**
* @brief ESP_BLE_MESH_PROV_REGISTER_COMP_EVT
*/
struct ble_mesh_prov_register_comp_param {
int err_code; /*!< Indicate the result of BLE Mesh initialization */
} prov_register_comp; /*!< Event parameter of ESP_BLE_MESH_PROV_REGISTER_COMP_EVT */
/**
* @brief ESP_BLE_MESH_NODE_SET_UNPROV_DEV_NAME_COMP_EVT
*/
struct ble_mesh_set_unprov_dev_name_comp_param {
int err_code; /*!< Indicate the result of setting BLE Mesh device name */
} node_set_unprov_dev_name_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_SET_UNPROV_DEV_NAME_COMP_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROV_ENABLE_COMP_EVT
*/
struct ble_mesh_prov_enable_comp_param {
int err_code; /*!< Indicate the result of enabling BLE Mesh device */
} node_prov_enable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_ENABLE_COMP_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROV_DISABLE_COMP_EVT
*/
struct ble_mesh_prov_disable_comp_param {
int err_code; /*!< Indicate the result of disabling BLE Mesh device */
} node_prov_disable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_DISABLE_COMP_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROV_LINK_OPEN_EVT
*/
struct ble_mesh_link_open_evt_param {
esp_ble_mesh_prov_bearer_t bearer; /*!< Type of the bearer used when device link is open */
} node_prov_link_open; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_LINK_OPEN_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROV_LINK_CLOSE_EVT
*/
struct ble_mesh_link_close_evt_param {
esp_ble_mesh_prov_bearer_t bearer; /*!< Type of the bearer used when device link is closed */
} node_prov_link_close; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_LINK_CLOSE_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROV_OUTPUT_NUMBER_EVT
*/
struct ble_mesh_output_num_evt_param {
esp_ble_mesh_output_action_t action; /*!< Action of Output OOB Authentication */
uint32_t number; /*!< Number of Output OOB Authentication */
} node_prov_output_num; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_OUTPUT_NUMBER_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROV_OUTPUT_STRING_EVT
*/
struct ble_mesh_output_str_evt_param {
char string[8]; /*!< String of Output OOB Authentication */
} node_prov_output_str; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_OUTPUT_STRING_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROV_INPUT_EVT
*/
struct ble_mesh_input_evt_param {
esp_ble_mesh_input_action_t action; /*!< Action of Input OOB Authentication */
uint8_t size; /*!< Size of Input OOB Authentication */
} node_prov_input; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_INPUT_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROV_COMPLETE_EVT
*/
struct ble_mesh_provision_complete_evt_param {
uint16_t net_idx; /*!< NetKey Index */
uint8_t net_key[16]; /*!< NetKey */
uint16_t addr; /*!< Primary address */
uint8_t flags; /*!< Flags */
uint32_t iv_index; /*!< IV Index */
} node_prov_complete; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_COMPLETE_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROV_RESET_EVT
*/
struct ble_mesh_provision_reset_param {
} node_prov_reset; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_RESET_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROV_SET_OOB_PUB_KEY_COMP_EVT
*/
struct ble_mesh_set_oob_pub_key_comp_param {
int err_code; /*!< Indicate the result of setting OOB Public Key */
} node_prov_set_oob_pub_key_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_SET_OOB_PUB_KEY_COMP_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROV_INPUT_NUM_COMP_EVT
*/
struct ble_mesh_input_number_comp_param {
int err_code; /*!< Indicate the result of inputting number */
} node_prov_input_num_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_INPUT_NUM_COMP_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROV_INPUT_STR_COMP_EVT
*/
struct ble_mesh_input_string_comp_param {
int err_code; /*!< Indicate the result of inputting string */
} node_prov_input_str_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROV_INPUT_STR_COMP_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROXY_IDENTITY_ENABLE_COMP_EVT
*/
struct ble_mesh_proxy_identity_enable_comp_param {
int err_code; /*!< Indicate the result of enabling Mesh Proxy advertising */
} node_proxy_identity_enable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROXY_IDENTITY_ENABLE_COMP_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROXY_GATT_ENABLE_COMP_EVT
*/
struct ble_mesh_proxy_gatt_enable_comp_param {
int err_code; /*!< Indicate the result of enabling Mesh Proxy Service */
} node_proxy_gatt_enable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROXY_GATT_ENABLE_COMP_EVT */
/**
* @brief ESP_BLE_MESH_NODE_PROXY_GATT_DISABLE_COMP_EVT
*/
struct ble_mesh_proxy_gatt_disable_comp_param {
int err_code; /*!< Indicate the result of disabling Mesh Proxy Service */
} node_proxy_gatt_disable_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_PROXY_GATT_DISABLE_COMP_EVT */
/**
* @brief ESP_BLE_MESH_NODE_ADD_LOCAL_NET_KEY_COMP_EVT
*/
struct ble_mesh_node_add_local_net_key_comp_param {
int err_code; /*!< Indicate the result of adding local NetKey by the node */
uint16_t net_idx; /*!< NetKey Index */
} node_add_net_key_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_ADD_LOCAL_NET_KEY_COMP_EVT */
/**
* @brief ESP_BLE_MESH_NODE_ADD_LOCAL_APP_KEY_COMP_EVT
*/
struct ble_mesh_node_add_local_app_key_comp_param {
int err_code; /*!< Indicate the result of adding local AppKey by the node */
uint16_t net_idx; /*!< NetKey Index */
uint16_t app_idx; /*!< AppKey Index */
} node_add_app_key_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_ADD_LOCAL_APP_KEY_COMP_EVT */
/**
* @brief ESP_BLE_MESH_NODE_BIND_APP_KEY_TO_MODEL_COMP_EVT
*/
struct ble_mesh_node_bind_local_mod_app_comp_param {
int err_code; /*!< Indicate the result of binding AppKey with model by the node */
uint16_t element_addr; /*!< Element address */
uint16_t app_idx; /*!< AppKey Index */
uint16_t company_id; /*!< Company ID */
uint16_t model_id; /*!< Model ID */
} node_bind_app_key_to_model_comp; /*!< Event parameter of ESP_BLE_MESH_NODE_BIND_APP_KEY_TO_MODEL_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_RECV_UNPROV_ADV_PKT_EVT
*/
struct ble_mesh_provisioner_recv_unprov_adv_pkt_param {
uint8_t dev_uuid[16]; /*!< Device UUID of the unprovisioned device */
esp_ble_mesh_bd_addr_t addr; /*!< Device address of the unprovisioned device */
esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */
uint16_t oob_info; /*!< OOB Info of the unprovisioned device */
uint8_t adv_type; /*!< Avertising type of the unprovisioned device */
esp_ble_mesh_prov_bearer_t bearer; /*!< Bearer of the unprovisioned device */
int8_t rssi; /*!< RSSI of the received advertising packet */
} provisioner_recv_unprov_adv_pkt; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_RECV_UNPROV_ADV_PKT_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_PROV_ENABLE_COMP_EVT
*/
struct ble_mesh_provisioner_prov_enable_comp_param {
int err_code; /*!< Indicate the result of enabling BLE Mesh Provisioner */
} provisioner_prov_enable_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_ENABLE_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_PROV_DISABLE_COMP_EVT
*/
struct ble_mesh_provisioner_prov_disable_comp_param {
int err_code; /*!< Indicate the result of disabling BLE Mesh Provisioner */
} provisioner_prov_disable_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_DISABLE_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_PROV_LINK_OPEN_EVT
*/
struct ble_mesh_provisioner_link_open_evt_param {
esp_ble_mesh_prov_bearer_t bearer; /*!< Type of the bearer used when Provisioner link is opened */
} provisioner_prov_link_open; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_LINK_OPEN_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_EVT
*/
struct ble_mesh_provisioner_prov_read_oob_pub_key_evt_param {
uint8_t link_idx; /*!< Index of the provisioning link */
} provisioner_prov_read_oob_pub_key; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_PROV_INPUT_EVT
*/
struct ble_mesh_provisioner_prov_input_evt_param {
esp_ble_mesh_oob_method_t method; /*!< Method of device Output OOB Authentication */
esp_ble_mesh_output_action_t action; /*!< Action of device Output OOB Authentication */
uint8_t size; /*!< Size of device Output OOB Authentication */
uint8_t link_idx; /*!< Index of the provisioning link */
} provisioner_prov_input; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_INPUT_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_PROV_OUTPUT_EVT
*/
struct ble_mesh_provisioner_prov_output_evt_param {
esp_ble_mesh_oob_method_t method; /*!< Method of device Input OOB Authentication */
esp_ble_mesh_input_action_t action; /*!< Action of device Input OOB Authentication */
uint8_t size; /*!< Size of device Input OOB Authentication */
uint8_t link_idx; /*!< Index of the provisioning link */
union {
char string[8]; /*!< String output by the Provisioner */
uint32_t number; /*!< Number output by the Provisioner */
};
} provisioner_prov_output; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_OUTPUT_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_PROV_LINK_CLOSE_EVT
*/
struct ble_mesh_provisioner_link_close_evt_param {
esp_ble_mesh_prov_bearer_t bearer; /*!< Type of the bearer used when Provisioner link is closed */
uint8_t reason; /*!< Reason of the closed provisioning link */
} provisioner_prov_link_close; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_LINK_CLOSE_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_PROV_COMPLETE_EVT
*/
struct ble_mesh_provisioner_prov_comp_param {
uint16_t node_idx; /*!< Index of the provisioned device */
esp_ble_mesh_octet16_t device_uuid; /*!< Device UUID of the provisioned device */
uint16_t unicast_addr; /*!< Primary address of the provisioned device */
uint8_t element_num; /*!< Element count of the provisioned device */
uint16_t netkey_idx; /*!< NetKey Index of the provisioned device */
} provisioner_prov_complete; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_COMPLETE_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_ADD_UNPROV_DEV_COMP_EVT
*/
struct ble_mesh_provisioner_add_unprov_dev_comp_param {
int err_code; /*!< Indicate the result of adding device into queue by the Provisioner */
} provisioner_add_unprov_dev_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_ADD_UNPROV_DEV_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_PROV_DEV_WITH_ADDR_COMP_EVT
*/
struct ble_mesh_provisioner_prov_dev_with_addr_comp_param {
int err_code; /*!< Indicate the result of Provisioner starting to provision a device */
} provisioner_prov_dev_with_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_DEV_WITH_ADDR_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_DELETE_DEV_COMP_EVT
*/
struct ble_mesh_provisioner_delete_dev_comp_param {
int err_code; /*!< Indicate the result of deleting device by the Provisioner */
} provisioner_delete_dev_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_DELETE_DEV_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_SET_DEV_UUID_MATCH_COMP_EVT
*/
struct ble_mesh_provisioner_set_dev_uuid_match_comp_param {
int err_code; /*!< Indicate the result of setting Device UUID match value by the Provisioner */
} provisioner_set_dev_uuid_match_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_DEV_UUID_MATCH_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_SET_PROV_DATA_INFO_COMP_EVT
*/
struct ble_mesh_provisioner_set_prov_data_info_comp_param {
int err_code; /*!< Indicate the result of setting provisioning info by the Provisioner */
} provisioner_set_prov_data_info_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_PROV_DATA_INFO_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_SET_STATIC_OOB_VALUE_COMP_EVT
*/
struct ble_mesh_provisioner_set_static_oob_val_comp_param {
int err_code; /*!< Indicate the result of setting static oob value by the Provisioner */
} provisioner_set_static_oob_val_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_STATIC_OOB_VALUE_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_SET_PRIMARY_ELEM_ADDR_COMP_EVT
*/
struct ble_mesh_provisioner_set_primary_elem_addr_comp_param {
int err_code; /*!< Indicate the result of setting unicast address of primary element by the Provisioner */
} provisioner_set_primary_elem_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_PRIMARY_ELEM_ADDR_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_COMP_EVT
*/
struct ble_mesh_provisioner_prov_read_oob_pub_key_comp_param {
int err_code; /*!< Indicate the result of setting OOB Public Key by the Provisioner */
} provisioner_prov_read_oob_pub_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_READ_OOB_PUB_KEY_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_PROV_INPUT_NUMBER_COMP_EVT
*/
struct ble_mesh_provisioner_prov_input_num_comp_param {
int err_code; /*!< Indicate the result of inputting number by the Provisioner */
} provisioner_prov_input_num_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_INPUT_NUMBER_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_PROV_INPUT_STRING_COMP_EVT
*/
struct ble_mesh_provisioner_prov_input_str_comp_param {
int err_code; /*!< Indicate the result of inputting string by the Provisioner */
} provisioner_prov_input_str_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_PROV_INPUT_STRING_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_SET_NODE_NAME_COMP_EVT
*/
struct ble_mesh_provisioner_set_node_name_comp_param {
int err_code; /*!< Indicate the result of setting provisioned device name by the Provisioner */
uint16_t node_index; /*!< Index of the provisioned device */
} provisioner_set_node_name_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_SET_NODE_NAME_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_APP_KEY_COMP_EVT
*/
struct ble_mesh_provisioner_add_local_app_key_comp_param {
int err_code; /*!< Indicate the result of adding local AppKey by the Provisioner */
uint16_t net_idx; /*!< NetKey Index */
uint16_t app_idx; /*!< AppKey Index */
} provisioner_add_app_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_APP_KEY_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_APP_KEY_COMP_EVT
*/
struct ble_mesh_provisioner_update_local_app_key_comp_param {
int err_code; /*!< Indicate the result of updating local AppKey by the Provisioner */
uint16_t net_idx; /*!< NetKey Index */
uint16_t app_idx; /*!< AppKey Index */
} provisioner_update_app_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_APP_KEY_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_BIND_APP_KEY_TO_MODEL_COMP_EVT
*/
struct ble_mesh_provisioner_bind_local_mod_app_comp_param {
int err_code; /*!< Indicate the result of binding AppKey with model by the Provisioner */
uint16_t element_addr; /*!< Element address */
uint16_t app_idx; /*!< AppKey Index */
uint16_t company_id; /*!< Company ID */
uint16_t model_id; /*!< Model ID */
} provisioner_bind_app_key_to_model_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_BIND_APP_KEY_TO_MODEL_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_NET_KEY_COMP_EVT
*/
struct ble_mesh_provisioner_add_local_net_key_comp_param {
int err_code; /*!< Indicate the result of adding local NetKey by the Provisioner */
uint16_t net_idx; /*!< NetKey Index */
} provisioner_add_net_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_ADD_LOCAL_NET_KEY_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_NET_KEY_COMP_EVT
*/
struct ble_mesh_provisioner_update_local_net_key_comp_param {
int err_code; /*!< Indicate the result of updating local NetKey by the Provisioner */
uint16_t net_idx; /*!< NetKey Index */
} provisioner_update_net_key_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_UPDATE_LOCAL_NET_KEY_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_STORE_NODE_COMP_DATA_COMP_EVT
*/
struct ble_mesh_provisioner_store_node_comp_data_comp_param {
int err_code; /*!< Indicate the result of storing node composition data by the Provisioner */
uint16_t addr; /*!< Node element address */
} provisioner_store_node_comp_data_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_STORE_NODE_COMP_DATA_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_UUID_COMP_EVT
*/
struct ble_mesh_provisioner_delete_node_with_uuid_comp_param {
int err_code; /*!< Indicate the result of deleting node with uuid by the Provisioner */
uint8_t uuid[16]; /*!< Node device uuid */
} provisioner_delete_node_with_uuid_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_UUID_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_ADDR_COMP_EVT
*/
struct ble_mesh_provisioner_delete_node_with_addr_comp_param {
int err_code; /*!< Indicate the result of deleting node with unicast address by the Provisioner */
uint16_t unicast_addr; /*!< Node unicast address */
} provisioner_delete_node_with_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_DELETE_NODE_WITH_ADDR_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_ENABLE_HEARTBEAT_RECV_COMP_EVT
*/
struct {
int err_code; /*!< Indicate the result of enabling/disabling to receive heartbeat messages by the Provisioner */
bool enable; /*!< Indicate enabling or disabling receiving heartbeat messages */
} provisioner_enable_heartbeat_recv_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_ENABLE_HEARTBEAT_RECV_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_TYPE_COMP_EVT
*/
struct {
int err_code; /*!< Indicate the result of setting the heartbeat filter type by the Provisioner */
uint8_t type; /*!< Type of the filter used for receiving heartbeat messages */
} provisioner_set_heartbeat_filter_type_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_TYPE_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_INFO_COMP_EVT
*/
struct {
int err_code; /*!< Indicate the result of setting the heartbeat filter address by the Provisioner */
uint8_t op; /*!< Operation (add, remove, clean) */
uint16_t hb_src; /*!< Heartbeat source address */
uint16_t hb_dst; /*!< Heartbeat destination address */
} provisioner_set_heartbeat_filter_info_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_SET_HEARTBEAT_FILTER_INFO_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_RECV_HEARTBEAT_MESSAGE_EVT
*/
struct {
uint16_t hb_src; /*!< Heartbeat source address */
uint16_t hb_dst; /*!< Heartbeat destination address */
uint8_t init_ttl; /*!< Heartbeat InitTTL */
uint8_t rx_ttl; /*!< Heartbeat RxTTL */
uint8_t hops; /*!< Heartbeat hops (InitTTL - RxTTL + 1) */
uint16_t feature; /*!< Bit field of currently active features of the node */
int8_t rssi; /*!< RSSI of the heartbeat message */
} provisioner_recv_heartbeat; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_RECV_HEARTBEAT_MESSAGE_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_DIRECT_ERASE_SETTINGS_COMP_EVT
*/
struct {
int err_code; /*!< Indicate the result of directly erasing settings by the Provisioner */
} provisioner_direct_erase_settings_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_DIRECT_ERASE_SETTINGS_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_INDEX_COMP_EVT
*/
struct {
int err_code; /*!< Indicate the result of opening settings with index by the Provisioner */
uint8_t index; /*!< Index of Provisioner settings */
} provisioner_open_settings_with_index_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_INDEX_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_UID_COMP_EVT
*/
struct {
int err_code; /*!< Indicate the result of opening settings with user id by the Provisioner */
uint8_t index; /*!< Index of Provisioner settings */
char uid[ESP_BLE_MESH_SETTINGS_UID_SIZE + 1]; /*!< Provisioner settings user id */
} provisioner_open_settings_with_uid_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_OPEN_SETTINGS_WITH_UID_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_INDEX_COMP_EVT
*/
struct {
int err_code; /*!< Indicate the result of closing settings with index by the Provisioner */
uint8_t index; /*!< Index of Provisioner settings */
} provisioner_close_settings_with_index_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_INDEX_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_UID_COMP_EVT
*/
struct {
int err_code; /*!< Indicate the result of closing settings with user id by the Provisioner */
uint8_t index; /*!< Index of Provisioner settings */
char uid[ESP_BLE_MESH_SETTINGS_UID_SIZE + 1]; /*!< Provisioner settings user id */
} provisioner_close_settings_with_uid_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_CLOSE_SETTINGS_WITH_UID_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_INDEX_COMP_EVT
*/
struct {
int err_code; /*!< Indicate the result of deleting settings with index by the Provisioner */
uint8_t index; /*!< Index of Provisioner settings */
} provisioner_delete_settings_with_index_comp; /*!< Event parameter of ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_INDEX_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_UID_COMP_EVT
*/
struct {
int err_code; /*!< Indicate the result of deleting settings with user id by the Provisioner */
uint8_t index; /*!< Index of Provisioner settings */
char uid[ESP_BLE_MESH_SETTINGS_UID_SIZE + 1]; /*!< Provisioner settings user id */
} provisioner_delete_settings_with_uid_comp; /*!< Event parameters of ESP_BLE_MESH_PROVISIONER_DELETE_SETTINGS_WITH_UID_COMP_EVT */
/**
* @brief ESP_BLE_MESH_SET_FAST_PROV_INFO_COMP_EVT
*/
struct ble_mesh_set_fast_prov_info_comp_param {
uint8_t status_unicast; /*!< Indicate the result of setting unicast address range of fast provisioning */
uint8_t status_net_idx; /*!< Indicate the result of setting NetKey Index of fast provisioning */
uint8_t status_match; /*!< Indicate the result of setting matching Device UUID of fast provisioning */
} set_fast_prov_info_comp; /*!< Event parameter of ESP_BLE_MESH_SET_FAST_PROV_INFO_COMP_EVT */
/**
* @brief ESP_BLE_MESH_SET_FAST_PROV_ACTION_COMP_EVT
*/
struct ble_mesh_set_fast_prov_action_comp_param {
uint8_t status_action; /*!< Indicate the result of setting action of fast provisioning */
} set_fast_prov_action_comp; /*!< Event parameter of ESP_BLE_MESH_SET_FAST_PROV_ACTION_COMP_EVT */
/**
* @brief ESP_BLE_MESH_HEARTBEAT_MESSAGE_RECV_EVT
*/
struct ble_mesh_heartbeat_msg_recv_param {
uint8_t hops; /*!< Heartbeat hops (InitTTL - RxTTL + 1) */
uint16_t feature; /*!< Bit field of currently active features of the node */
} heartbeat_msg_recv; /*!< Event parameter of ESP_BLE_MESH_HEARTBEAT_MESSAGE_RECV_EVT */
/**
* @brief ESP_BLE_MESH_LPN_ENABLE_COMP_EVT
*/
struct ble_mesh_lpn_enable_comp_param {
int err_code; /*!< Indicate the result of enabling LPN functionality */
} lpn_enable_comp; /*!< Event parameter of ESP_BLE_MESH_LPN_ENABLE_COMP_EVT */
/**
* @brief ESP_BLE_MESH_LPN_DISABLE_COMP_EVT
*/
struct ble_mesh_lpn_disable_comp_param {
int err_code; /*!< Indicate the result of disabling LPN functionality */
} lpn_disable_comp; /*!< Event parameter of ESP_BLE_MESH_LPN_DISABLE_COMP_EVT */
/**
* @brief ESP_BLE_MESH_LPN_POLL_COMP_EVT
*/
struct ble_mesh_lpn_poll_comp_param {
int err_code; /*!< Indicate the result of sending Friend Poll */
} lpn_poll_comp; /*!< Event parameter of ESP_BLE_MESH_LPN_POLL_COMP_EVT */
/**
* @brief ESP_BLE_MESH_LPN_FRIENDSHIP_ESTABLISH_EVT
*/
struct ble_mesh_lpn_friendship_establish_param {
uint16_t friend_addr; /*!< Friend Node unicast address */
} lpn_friendship_establish; /*!< Event parameter of ESP_BLE_MESH_LPN_FRIENDSHIP_ESTABLISH_EVT */
/**
* @brief ESP_BLE_MESH_LPN_FRIENDSHIP_TERMINATE_EVT
*/
struct ble_mesh_lpn_friendship_terminate_param {
uint16_t friend_addr; /*!< Friend Node unicast address */
} lpn_friendship_terminate; /*!< Event parameter of ESP_BLE_MESH_LPN_FRIENDSHIP_TERMINATE_EVT */
/**
* @brief ESP_BLE_MESH_FRIEND_FRIENDSHIP_ESTABLISH_EVT
*/
struct ble_mesh_friend_friendship_establish_param {
uint16_t lpn_addr; /*!< Low Power Node unicast address */
} frnd_friendship_establish; /*!< Event parameter of ESP_BLE_MESH_FRIEND_FRIENDSHIP_ESTABLISH_EVT */
/**
* @brief ESP_BLE_MESH_FRIEND_FRIENDSHIP_TERMINATE_EVT
*/
struct ble_mesh_friend_friendship_terminate_param {
uint16_t lpn_addr; /*!< Low Power Node unicast address */
/** This enum value is the reason of friendship termination on the friend node side */
enum {
ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_ESTABLISH_FAIL, /*!< Friend Offer has been sent, but Friend Offer is not received within 1 second, friendship fails to be established */
ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_POLL_TIMEOUT, /*!< Friendship is established, PollTimeout timer expires and no Friend Poll/Sub Add/Sub Remove is received */
ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_RECV_FRND_REQ, /*!< Receive Friend Request from existing Low Power Node */
ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_RECV_FRND_CLEAR, /*!< Receive Friend Clear from other friend node */
ESP_BLE_MESH_FRND_FRIENDSHIP_TERMINATE_DISABLE, /*!< Friend feature disabled or corresponding NetKey is deleted */
} reason; /*!< Friendship terminated reason */
} frnd_friendship_terminate; /*!< Event parameter of ESP_BLE_MESH_FRIEND_FRIENDSHIP_TERMINATE_EVT */
/**
* @brief ESP_BLE_MESH_PROXY_CLIENT_RECV_ADV_PKT_EVT
*/
struct ble_mesh_proxy_client_recv_adv_pkt_param {
esp_ble_mesh_bd_addr_t addr; /*!< Device address */
esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */
uint16_t net_idx; /*!< Network ID related NetKey Index */
uint8_t net_id[8]; /*!< Network ID contained in the advertising packet */
int8_t rssi; /*!< RSSI of the received advertising packet */
} proxy_client_recv_adv_pkt; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_RECV_ADV_PKT_EVT */
/**
* @brief ESP_BLE_MESH_PROXY_CLIENT_CONNECTED_EVT
*/
struct ble_mesh_proxy_client_connected_param {
esp_ble_mesh_bd_addr_t addr; /*!< Device address of the Proxy Server */
esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */
uint8_t conn_handle; /*!< Proxy connection handle */
uint16_t net_idx; /*!< Corresponding NetKey Index */
} proxy_client_connected; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_CONNECTED_EVT */
/**
* @brief ESP_BLE_MESH_PROXY_CLIENT_DISCONNECTED_EVT
*/
struct ble_mesh_proxy_client_disconnected_param {
esp_ble_mesh_bd_addr_t addr; /*!< Device address of the Proxy Server */
esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */
uint8_t conn_handle; /*!< Proxy connection handle */
uint16_t net_idx; /*!< Corresponding NetKey Index */
uint8_t reason; /*!< Proxy disconnect reason */
} proxy_client_disconnected; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_DISCONNECTED_EVT */
/**
* @brief ESP_BLE_MESH_PROXY_CLIENT_RECV_FILTER_STATUS_EVT
*/
struct ble_mesh_proxy_client_recv_filter_status_param {
uint8_t conn_handle; /*!< Proxy connection handle */
uint16_t server_addr; /*!< Proxy Server primary element address */
uint16_t net_idx; /*!< Corresponding NetKey Index */
uint8_t filter_type; /*!< Proxy Server filter type(whitelist or blacklist) */
uint16_t list_size; /*!< Number of addresses in the Proxy Server filter list */
} proxy_client_recv_filter_status; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_RECV_FILTER_STATUS_EVT */
/**
* @brief ESP_BLE_MESH_PROXY_CLIENT_CONNECT_COMP_EVT
*/
struct ble_mesh_proxy_client_connect_comp_param {
int err_code; /*!< Indicate the result of Proxy Client connect */
esp_ble_mesh_bd_addr_t addr; /*!< Device address of the Proxy Server */
esp_ble_mesh_addr_type_t addr_type; /*!< Device address type */
uint16_t net_idx; /*!< Corresponding NetKey Index */
} proxy_client_connect_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_CONNECT_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROXY_CLIENT_DISCONNECT_COMP_EVT
*/
struct ble_mesh_proxy_client_disconnect_comp_param {
int err_code; /*!< Indicate the result of Proxy Client disconnect */
uint8_t conn_handle; /*!< Proxy connection handle */
} proxy_client_disconnect_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_DISCONNECT_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROXY_CLIENT_SET_FILTER_TYPE_COMP_EVT
*/
struct ble_mesh_proxy_client_set_filter_type_comp_param {
int err_code; /*!< Indicate the result of Proxy Client set filter type */
uint8_t conn_handle; /*!< Proxy connection handle */
uint16_t net_idx; /*!< Corresponding NetKey Index */
} proxy_client_set_filter_type_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_SET_FILTER_TYPE_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROXY_CLIENT_ADD_FILTER_ADDR_COMP_EVT
*/
struct ble_mesh_proxy_client_add_filter_addr_comp_param {
int err_code; /*!< Indicate the result of Proxy Client add filter address */
uint8_t conn_handle; /*!< Proxy connection handle */
uint16_t net_idx; /*!< Corresponding NetKey Index */
} proxy_client_add_filter_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_ADD_FILTER_ADDR_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROXY_CLIENT_REMOVE_FILTER_ADDR_COMP_EVT
*/
struct ble_mesh_proxy_client_remove_filter_addr_comp_param {
int err_code; /*!< Indicate the result of Proxy Client remove filter address */
uint8_t conn_handle; /*!< Proxy connection handle */
uint16_t net_idx; /*!< Corresponding NetKey Index */
} proxy_client_remove_filter_addr_comp; /*!< Event parameter of ESP_BLE_MESH_PROXY_CLIENT_REMOVE_FILTER_ADDR_COMP_EVT */
/**
* @brief ESP_BLE_MESH_PROXY_SERVER_CONNECTED_EVT
*/
struct ble_mesh_proxy_server_connected_param {
uint8_t conn_handle; /*!< Proxy connection handle */
} proxy_server_connected; /*!< Event parameter of ESP_BLE_MESH_PROXY_SERVER_CONNECTED_EVT */
/**
* @brief ESP_BLE_MESH_PROXY_SERVER_DISCONNECTED_EVT
*/
struct ble_mesh_proxy_server_disconnected_param {
uint8_t conn_handle; /*!< Proxy connection handle */
uint8_t reason; /*!< Proxy disconnect reason */
} proxy_server_disconnected; /*!< Event parameter of ESP_BLE_MESH_PROXY_SERVER_DISCONNECTED_EVT */
/**
* @brief ESP_BLE_MESH_MODEL_SUBSCRIBE_GROUP_ADDR_COMP_EVT
*/
struct ble_mesh_model_sub_group_addr_comp_param {
int err_code; /*!< Indicate the result of local model subscribing group address */
uint16_t element_addr; /*!< Element address */
uint16_t company_id; /*!< Company ID */
uint16_t model_id; /*!< Model ID */
uint16_t group_addr; /*!< Group Address */
} model_sub_group_addr_comp; /*!< Event parameters of ESP_BLE_MESH_MODEL_SUBSCRIBE_GROUP_ADDR_COMP_EVT */
/**
* @brief ESP_BLE_MESH_MODEL_UNSUBSCRIBE_GROUP_ADDR_COMP_EVT
*/
struct ble_mesh_model_unsub_group_addr_comp_param {
int err_code; /*!< Indicate the result of local model unsubscribing group address */
uint16_t element_addr; /*!< Element address */
uint16_t company_id; /*!< Company ID */
uint16_t model_id; /*!< Model ID */
uint16_t group_addr; /*!< Group Address */
} model_unsub_group_addr_comp; /*!< Event parameters of ESP_BLE_MESH_MODEL_UNSUBSCRIBE_GROUP_ADDR_COMP_EVT */
/**
* @brief ESP_BLE_MESH_DEINIT_MESH_COMP_EVT
*/
struct ble_mesh_deinit_mesh_comp_param {
int err_code; /*!< Indicate the result of BLE Mesh deinitialization */
} deinit_mesh_comp; /*!< Event parameter of ESP_BLE_MESH_DEINIT_MESH_COMP_EVT */
} esp_ble_mesh_prov_cb_param_t;
/**
* @brief BLE Mesh models related Model ID and Opcode definitions
*/
/*!< Foundation Models */
#define ESP_BLE_MESH_MODEL_ID_CONFIG_SRV 0x0000
#define ESP_BLE_MESH_MODEL_ID_CONFIG_CLI 0x0001
#define ESP_BLE_MESH_MODEL_ID_HEALTH_SRV 0x0002
#define ESP_BLE_MESH_MODEL_ID_HEALTH_CLI 0x0003
/*!< Models from the Mesh Model Specification */
#define ESP_BLE_MESH_MODEL_ID_GEN_ONOFF_SRV 0x1000
#define ESP_BLE_MESH_MODEL_ID_GEN_ONOFF_CLI 0x1001
#define ESP_BLE_MESH_MODEL_ID_GEN_LEVEL_SRV 0x1002
#define ESP_BLE_MESH_MODEL_ID_GEN_LEVEL_CLI 0x1003
#define ESP_BLE_MESH_MODEL_ID_GEN_DEF_TRANS_TIME_SRV 0x1004
#define ESP_BLE_MESH_MODEL_ID_GEN_DEF_TRANS_TIME_CLI 0x1005
#define ESP_BLE_MESH_MODEL_ID_GEN_POWER_ONOFF_SRV 0x1006
#define ESP_BLE_MESH_MODEL_ID_GEN_POWER_ONOFF_SETUP_SRV 0x1007
#define ESP_BLE_MESH_MODEL_ID_GEN_POWER_ONOFF_CLI 0x1008
#define ESP_BLE_MESH_MODEL_ID_GEN_POWER_LEVEL_SRV 0x1009
#define ESP_BLE_MESH_MODEL_ID_GEN_POWER_LEVEL_SETUP_SRV 0x100a
#define ESP_BLE_MESH_MODEL_ID_GEN_POWER_LEVEL_CLI 0x100b
#define ESP_BLE_MESH_MODEL_ID_GEN_BATTERY_SRV 0x100c
#define ESP_BLE_MESH_MODEL_ID_GEN_BATTERY_CLI 0x100d
#define ESP_BLE_MESH_MODEL_ID_GEN_LOCATION_SRV 0x100e
#define ESP_BLE_MESH_MODEL_ID_GEN_LOCATION_SETUP_SRV 0x100f
#define ESP_BLE_MESH_MODEL_ID_GEN_LOCATION_CLI 0x1010
#define ESP_BLE_MESH_MODEL_ID_GEN_ADMIN_PROP_SRV 0x1011
#define ESP_BLE_MESH_MODEL_ID_GEN_MANUFACTURER_PROP_SRV 0x1012
#define ESP_BLE_MESH_MODEL_ID_GEN_USER_PROP_SRV 0x1013
#define ESP_BLE_MESH_MODEL_ID_GEN_CLIENT_PROP_SRV 0x1014
#define ESP_BLE_MESH_MODEL_ID_GEN_PROP_CLI 0x1015
#define ESP_BLE_MESH_MODEL_ID_SENSOR_SRV 0x1100
#define ESP_BLE_MESH_MODEL_ID_SENSOR_SETUP_SRV 0x1101
#define ESP_BLE_MESH_MODEL_ID_SENSOR_CLI 0x1102
#define ESP_BLE_MESH_MODEL_ID_TIME_SRV 0x1200
#define ESP_BLE_MESH_MODEL_ID_TIME_SETUP_SRV 0x1201
#define ESP_BLE_MESH_MODEL_ID_TIME_CLI 0x1202
#define ESP_BLE_MESH_MODEL_ID_SCENE_SRV 0x1203
#define ESP_BLE_MESH_MODEL_ID_SCENE_SETUP_SRV 0x1204
#define ESP_BLE_MESH_MODEL_ID_SCENE_CLI 0x1205
#define ESP_BLE_MESH_MODEL_ID_SCHEDULER_SRV 0x1206
#define ESP_BLE_MESH_MODEL_ID_SCHEDULER_SETUP_SRV 0x1207
#define ESP_BLE_MESH_MODEL_ID_SCHEDULER_CLI 0x1208
#define ESP_BLE_MESH_MODEL_ID_LIGHT_LIGHTNESS_SRV 0x1300
#define ESP_BLE_MESH_MODEL_ID_LIGHT_LIGHTNESS_SETUP_SRV 0x1301
#define ESP_BLE_MESH_MODEL_ID_LIGHT_LIGHTNESS_CLI 0x1302
#define ESP_BLE_MESH_MODEL_ID_LIGHT_CTL_SRV 0x1303
#define ESP_BLE_MESH_MODEL_ID_LIGHT_CTL_SETUP_SRV 0x1304
#define ESP_BLE_MESH_MODEL_ID_LIGHT_CTL_CLI 0x1305
#define ESP_BLE_MESH_MODEL_ID_LIGHT_CTL_TEMP_SRV 0x1306
#define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_SRV 0x1307
#define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_SETUP_SRV 0x1308
#define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_CLI 0x1309
#define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_HUE_SRV 0x130a
#define ESP_BLE_MESH_MODEL_ID_LIGHT_HSL_SAT_SRV 0x130b
#define ESP_BLE_MESH_MODEL_ID_LIGHT_XYL_SRV 0x130c
#define ESP_BLE_MESH_MODEL_ID_LIGHT_XYL_SETUP_SRV 0x130d
#define ESP_BLE_MESH_MODEL_ID_LIGHT_XYL_CLI 0x130e
#define ESP_BLE_MESH_MODEL_ID_LIGHT_LC_SRV 0x130f
#define ESP_BLE_MESH_MODEL_ID_LIGHT_LC_SETUP_SRV 0x1310
#define ESP_BLE_MESH_MODEL_ID_LIGHT_LC_CLI 0x1311
/**
* esp_ble_mesh_opcode_config_client_get_t belongs to esp_ble_mesh_opcode_t, this typedef is only
* used to locate the opcodes used by esp_ble_mesh_config_client_get_state.
* The following opcodes will only be used in the esp_ble_mesh_config_client_get_state function.
*/
typedef uint32_t esp_ble_mesh_opcode_config_client_get_t;
#define ESP_BLE_MESH_MODEL_OP_BEACON_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x09) /*!< Config Beacon Get */
#define ESP_BLE_MESH_MODEL_OP_COMPOSITION_DATA_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x08) /*!< Config Composition Data Get */
#define ESP_BLE_MESH_MODEL_OP_DEFAULT_TTL_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0C) /*!< Config Default TTL Get */
#define ESP_BLE_MESH_MODEL_OP_GATT_PROXY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x12) /*!< Config GATT Proxy Get */
#define ESP_BLE_MESH_MODEL_OP_RELAY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x26) /*!< Config Relay Get */
#define ESP_BLE_MESH_MODEL_OP_MODEL_PUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x18) /*!< Config Model Publication Get */
#define ESP_BLE_MESH_MODEL_OP_FRIEND_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0F) /*!< Config Friend Get */
#define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_PUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x38) /*!< Config Heartbeat Publication Get */
#define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_SUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3a) /*!< Config Heartbeat Subscription Get */
#define ESP_BLE_MESH_MODEL_OP_NET_KEY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x42) /*!< Config NetKey Get */
#define ESP_BLE_MESH_MODEL_OP_APP_KEY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x01) /*!< Config AppKey Get */
#define ESP_BLE_MESH_MODEL_OP_NODE_IDENTITY_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x46) /*!< Config Node Identity Get */
#define ESP_BLE_MESH_MODEL_OP_SIG_MODEL_SUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x29) /*!< Config SIG Model Subscription Get */
#define ESP_BLE_MESH_MODEL_OP_VENDOR_MODEL_SUB_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2B) /*!< Config Vendor Model Subscription Get */
#define ESP_BLE_MESH_MODEL_OP_SIG_MODEL_APP_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4B) /*!< Config SIG Model App Get */
#define ESP_BLE_MESH_MODEL_OP_VENDOR_MODEL_APP_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4D) /*!< Config Vendor Model App Get */
#define ESP_BLE_MESH_MODEL_OP_KEY_REFRESH_PHASE_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x15) /*!< Config Key Refresh Phase Get */
#define ESP_BLE_MESH_MODEL_OP_LPN_POLLTIMEOUT_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2D) /*!< Config Low Power Node PollTimeout Get */
#define ESP_BLE_MESH_MODEL_OP_NETWORK_TRANSMIT_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x23) /*!< Config Network Transmit Get */
/**
* esp_ble_mesh_opcode_config_client_set_t belongs to esp_ble_mesh_opcode_t, this typedef is
* only used to locate the opcodes used by esp_ble_mesh_config_client_set_state.
* The following opcodes will only be used in the esp_ble_mesh_config_client_set_state function.
*/
typedef uint32_t esp_ble_mesh_opcode_config_client_set_t;
#define ESP_BLE_MESH_MODEL_OP_BEACON_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0A) /*!< Config Beacon Set */
#define ESP_BLE_MESH_MODEL_OP_DEFAULT_TTL_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0D) /*!< Config Default TTL Set */
#define ESP_BLE_MESH_MODEL_OP_GATT_PROXY_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x13) /*!< Config GATT Proxy Set */
#define ESP_BLE_MESH_MODEL_OP_RELAY_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x27) /*!< Config Relay Set */
#define ESP_BLE_MESH_MODEL_OP_MODEL_PUB_SET ESP_BLE_MESH_MODEL_OP_1(0x03) /*!< Config Model Publication Set */
#define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_ADD ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1B) /*!< Config Model Subscription Add */
#define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_VIRTUAL_ADDR_ADD ESP_BLE_MESH_MODEL_OP_2(0x80, 0x20) /*!< Config Model Subscription Virtual Address Add */
#define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_DELETE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1C) /*!< Config Model Subscription Delete */
#define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_VIRTUAL_ADDR_DELETE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x21) /*!< Config Model Subscription Virtual Address Delete */
#define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_OVERWRITE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1E) /*!< Config Model Subscription Overwrite */
#define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_VIRTUAL_ADDR_OVERWRITE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x22) /*!< Config Model Subscription Virtual Address Overwrite */
#define ESP_BLE_MESH_MODEL_OP_NET_KEY_ADD ESP_BLE_MESH_MODEL_OP_2(0x80, 0x40) /*!< Config NetKey Add */
#define ESP_BLE_MESH_MODEL_OP_APP_KEY_ADD ESP_BLE_MESH_MODEL_OP_1(0x00) /*!< Config AppKey Add */
#define ESP_BLE_MESH_MODEL_OP_MODEL_APP_BIND ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3D) /*!< Config Model App Bind */
#define ESP_BLE_MESH_MODEL_OP_NODE_RESET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x49) /*!< Config Node Reset */
#define ESP_BLE_MESH_MODEL_OP_FRIEND_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x10) /*!< Config Friend Set */
#define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_PUB_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x39) /*!< Config Heartbeat Publication Set */
#define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_SUB_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3B) /*!< Config Heartbeat Subscription Set */
#define ESP_BLE_MESH_MODEL_OP_NET_KEY_UPDATE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x45) /*!< Config NetKey Update */
#define ESP_BLE_MESH_MODEL_OP_NET_KEY_DELETE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x41) /*!< Config NetKey Delete */
#define ESP_BLE_MESH_MODEL_OP_APP_KEY_UPDATE ESP_BLE_MESH_MODEL_OP_1(0x01) /*!< Config AppKey Update */
#define ESP_BLE_MESH_MODEL_OP_APP_KEY_DELETE ESP_BLE_MESH_MODEL_OP_2(0x80, 0x00) /*!< Config AppKey Delete */
#define ESP_BLE_MESH_MODEL_OP_NODE_IDENTITY_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x47) /*!< Config Node Identity Set */
#define ESP_BLE_MESH_MODEL_OP_KEY_REFRESH_PHASE_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x16) /*!< Config Key Refresh Phase Set */
#define ESP_BLE_MESH_MODEL_OP_MODEL_PUB_VIRTUAL_ADDR_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1A) /*!< Config Model Publication Virtual Address Set */
#define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_DELETE_ALL ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1D) /*!< Config Model Subscription Delete All */
#define ESP_BLE_MESH_MODEL_OP_MODEL_APP_UNBIND ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3F) /*!< Config Model App Unbind */
#define ESP_BLE_MESH_MODEL_OP_NETWORK_TRANSMIT_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x24) /*!< Config Network Transmit Set */
/**
* esp_ble_mesh_opcode_config_status_t belongs to esp_ble_mesh_opcode_t, this typedef is only
* used to locate the opcodes used by the Config Model messages
* The following opcodes are used by the BLE Mesh Config Server Model internally to respond
* to the Config Client Model's request messages.
*/
typedef uint32_t esp_ble_mesh_opcode_config_status_t;
#define ESP_BLE_MESH_MODEL_OP_BEACON_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0B)
#define ESP_BLE_MESH_MODEL_OP_COMPOSITION_DATA_STATUS ESP_BLE_MESH_MODEL_OP_1(0x02)
#define ESP_BLE_MESH_MODEL_OP_DEFAULT_TTL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x0E)
#define ESP_BLE_MESH_MODEL_OP_GATT_PROXY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x14)
#define ESP_BLE_MESH_MODEL_OP_RELAY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x28)
#define ESP_BLE_MESH_MODEL_OP_MODEL_PUB_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x19)
#define ESP_BLE_MESH_MODEL_OP_MODEL_SUB_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x1F)
#define ESP_BLE_MESH_MODEL_OP_SIG_MODEL_SUB_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2A)
#define ESP_BLE_MESH_MODEL_OP_VENDOR_MODEL_SUB_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2C)
#define ESP_BLE_MESH_MODEL_OP_NET_KEY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x44)
#define ESP_BLE_MESH_MODEL_OP_NET_KEY_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x43)
#define ESP_BLE_MESH_MODEL_OP_APP_KEY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x03)
#define ESP_BLE_MESH_MODEL_OP_APP_KEY_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x02)
#define ESP_BLE_MESH_MODEL_OP_NODE_IDENTITY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x48)
#define ESP_BLE_MESH_MODEL_OP_MODEL_APP_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3E)
#define ESP_BLE_MESH_MODEL_OP_SIG_MODEL_APP_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4C)
#define ESP_BLE_MESH_MODEL_OP_VENDOR_MODEL_APP_LIST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4E)
#define ESP_BLE_MESH_MODEL_OP_NODE_RESET_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x4A)
#define ESP_BLE_MESH_MODEL_OP_FRIEND_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x11)
#define ESP_BLE_MESH_MODEL_OP_KEY_REFRESH_PHASE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x17)
#define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_PUB_STATUS ESP_BLE_MESH_MODEL_OP_1(0x06)
#define ESP_BLE_MESH_MODEL_OP_HEARTBEAT_SUB_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x3C)
#define ESP_BLE_MESH_MODEL_OP_LPN_POLLTIMEOUT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2E)
#define ESP_BLE_MESH_MODEL_OP_NETWORK_TRANSMIT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x25)
/**
* This typedef is only used to indicate the status code contained in some of
* the Configuration Server Model status message.
*/
typedef uint8_t esp_ble_mesh_cfg_status_t;
#define ESP_BLE_MESH_CFG_STATUS_SUCCESS 0x00
#define ESP_BLE_MESH_CFG_STATUS_INVALID_ADDRESS 0x01
#define ESP_BLE_MESH_CFG_STATUS_INVALID_MODEL 0x02
#define ESP_BLE_MESH_CFG_STATUS_INVALID_APPKEY 0x03
#define ESP_BLE_MESH_CFG_STATUS_INVALID_NETKEY 0x04
#define ESP_BLE_MESH_CFG_STATUS_INSUFFICIENT_RESOURCES 0x05
#define ESP_BLE_MESH_CFG_STATUS_KEY_INDEX_ALREADY_STORED 0x06
#define ESP_BLE_MESH_CFG_STATUS_INVALID_PUBLISH_PARAMETERS 0x07
#define ESP_BLE_MESH_CFG_STATUS_NOT_A_SUBSCRIBE_MODEL 0x08
#define ESP_BLE_MESH_CFG_STATUS_STORAGE_FAILURE 0x09
#define ESP_BLE_MESH_CFG_STATUS_FEATURE_NOT_SUPPORTED 0x0A
#define ESP_BLE_MESH_CFG_STATUS_CANNOT_UPDATE 0x0B
#define ESP_BLE_MESH_CFG_STATUS_CANNOT_REMOVE 0x0C
#define ESP_BLE_MESH_CFG_STATUS_CANNOT_BIND 0x0D
#define ESP_BLE_MESH_CFG_STATUS_TEMP_UNABLE_TO_CHANGE_STATE 0x0E
#define ESP_BLE_MESH_CFG_STATUS_CANNOT_SET 0x0F
#define ESP_BLE_MESH_CFG_STATUS_UNSPECIFIED_ERROR 0x10
#define ESP_BLE_MESH_CFG_STATUS_INVALID_BINDING 0x11
/**
* esp_ble_mesh_opcode_health_client_get_t belongs to esp_ble_mesh_opcode_t, this typedef is
* only used to locate the opcodes used by esp_ble_mesh_health_client_get_state.
* The following opcodes will only be used in the esp_ble_mesh_health_client_get_state function.
*/
typedef uint32_t esp_ble_mesh_opcode_health_client_get_t;
#define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x31) /*!< Health Fault Get */
#define ESP_BLE_MESH_MODEL_OP_HEALTH_PERIOD_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x34) /*!< Health Period Get */
#define ESP_BLE_MESH_MODEL_OP_ATTENTION_GET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x04) /*!< Health Attention Get */
/**
* esp_ble_mesh_opcode_health_client_set_t belongs to esp_ble_mesh_opcode_t, this typedef is
* only used to locate the opcodes used by esp_ble_mesh_health_client_set_state.
* The following opcodes will only be used in the esp_ble_mesh_health_client_set_state function.
*/
typedef uint32_t esp_ble_mesh_opcode_health_client_set_t;
#define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_CLEAR ESP_BLE_MESH_MODEL_OP_2(0x80, 0x2F) /*!< Health Fault Clear */
#define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_CLEAR_UNACK ESP_BLE_MESH_MODEL_OP_2(0x80, 0x30) /*!< Health Fault Clear Unacknowledged */
#define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_TEST ESP_BLE_MESH_MODEL_OP_2(0x80, 0x32) /*!< Health Fault Test */
#define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_TEST_UNACK ESP_BLE_MESH_MODEL_OP_2(0x80, 0x33) /*!< Health Fault Test Unacknowledged */
#define ESP_BLE_MESH_MODEL_OP_HEALTH_PERIOD_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x35) /*!< Health Period Set */
#define ESP_BLE_MESH_MODEL_OP_HEALTH_PERIOD_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x80, 0x36) /*!< Health Period Set Unacknowledged */
#define ESP_BLE_MESH_MODEL_OP_ATTENTION_SET ESP_BLE_MESH_MODEL_OP_2(0x80, 0x05) /*!< Health Attention Set */
#define ESP_BLE_MESH_MODEL_OP_ATTENTION_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x80, 0x06) /*!< Health Attention Set Unacknowledged */
/**
* esp_ble_mesh_health_model_status_t belongs to esp_ble_mesh_opcode_t, this typedef is
* only used to locate the opcodes used by the Health Model messages.
* The following opcodes are used by the BLE Mesh Health Server Model internally to
* respond to the Health Client Model's request messages.
*/
typedef uint32_t esp_ble_mesh_health_model_status_t;
#define ESP_BLE_MESH_MODEL_OP_HEALTH_CURRENT_STATUS ESP_BLE_MESH_MODEL_OP_1(0x04)
#define ESP_BLE_MESH_MODEL_OP_HEALTH_FAULT_STATUS ESP_BLE_MESH_MODEL_OP_1(0x05)
#define ESP_BLE_MESH_MODEL_OP_HEALTH_PERIOD_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x37)
#define ESP_BLE_MESH_MODEL_OP_ATTENTION_STATUS ESP_BLE_MESH_MODEL_OP_2(0x80, 0x07)
/**
* esp_ble_mesh_generic_message_opcode_t belongs to esp_ble_mesh_opcode_t, this typedef is
* only used to locate the opcodes used by functions esp_ble_mesh_generic_client_get_state
* & esp_ble_mesh_generic_client_set_state.
*/
typedef uint32_t esp_ble_mesh_generic_message_opcode_t;
/*!< Generic OnOff Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x01)
#define ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x02)
#define ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x03)
#define ESP_BLE_MESH_MODEL_OP_GEN_ONOFF_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x04)
/*!< Generic Level Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_LEVEL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x05)
#define ESP_BLE_MESH_MODEL_OP_GEN_LEVEL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x06)
#define ESP_BLE_MESH_MODEL_OP_GEN_LEVEL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x07)
#define ESP_BLE_MESH_MODEL_OP_GEN_LEVEL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x08)
#define ESP_BLE_MESH_MODEL_OP_GEN_DELTA_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x09)
#define ESP_BLE_MESH_MODEL_OP_GEN_DELTA_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0A)
#define ESP_BLE_MESH_MODEL_OP_GEN_MOVE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0B)
#define ESP_BLE_MESH_MODEL_OP_GEN_MOVE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0C)
/*!< Generic Default Transition Time Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_DEF_TRANS_TIME_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0D)
#define ESP_BLE_MESH_MODEL_OP_GEN_DEF_TRANS_TIME_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0E)
#define ESP_BLE_MESH_MODEL_OP_GEN_DEF_TRANS_TIME_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x0F)
#define ESP_BLE_MESH_MODEL_OP_GEN_DEF_TRANS_TIME_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x10)
/*!< Generic Power OnOff Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_ONPOWERUP_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x11)
#define ESP_BLE_MESH_MODEL_OP_GEN_ONPOWERUP_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x12)
/*!< Generic Power OnOff Setup Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_ONPOWERUP_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x13)
#define ESP_BLE_MESH_MODEL_OP_GEN_ONPOWERUP_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x14)
/*!< Generic Power Level Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LEVEL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x15)
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LEVEL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x16)
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LEVEL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x17)
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LEVEL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x18)
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LAST_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x19)
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_LAST_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1A)
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1B)
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1C)
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1D)
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1E)
/*!< Generic Power Level Setup Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x1F)
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x20)
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x21)
#define ESP_BLE_MESH_MODEL_OP_GEN_POWER_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x22)
/*!< Generic Battery Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_BATTERY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x23)
#define ESP_BLE_MESH_MODEL_OP_GEN_BATTERY_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x24)
/*!< Generic Location Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_LOC_GLOBAL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x25)
#define ESP_BLE_MESH_MODEL_OP_GEN_LOC_GLOBAL_STATUS ESP_BLE_MESH_MODEL_OP_1(0x40)
#define ESP_BLE_MESH_MODEL_OP_GEN_LOC_LOCAL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x26)
#define ESP_BLE_MESH_MODEL_OP_GEN_LOC_LOCAL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x27)
/*!< Generic Location Setup Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_LOC_GLOBAL_SET ESP_BLE_MESH_MODEL_OP_1(0x41)
#define ESP_BLE_MESH_MODEL_OP_GEN_LOC_GLOBAL_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x42)
#define ESP_BLE_MESH_MODEL_OP_GEN_LOC_LOCAL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x28)
#define ESP_BLE_MESH_MODEL_OP_GEN_LOC_LOCAL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x29)
/*!< Generic Manufacturer Property Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTIES_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2A)
#define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x43)
#define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2B)
#define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTY_SET ESP_BLE_MESH_MODEL_OP_1(0x44)
#define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTY_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x45)
#define ESP_BLE_MESH_MODEL_OP_GEN_MANUFACTURER_PROPERTY_STATUS ESP_BLE_MESH_MODEL_OP_1(0x46)
/*!< Generic Admin Property Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTIES_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2C)
#define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x47)
#define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2D)
#define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTY_SET ESP_BLE_MESH_MODEL_OP_1(0x48)
#define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTY_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x49)
#define ESP_BLE_MESH_MODEL_OP_GEN_ADMIN_PROPERTY_STATUS ESP_BLE_MESH_MODEL_OP_1(0x4A)
/*!< Generic User Property Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTIES_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2E)
#define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x4B)
#define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x2F)
#define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTY_SET ESP_BLE_MESH_MODEL_OP_1(0x4C)
#define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTY_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x4D)
#define ESP_BLE_MESH_MODEL_OP_GEN_USER_PROPERTY_STATUS ESP_BLE_MESH_MODEL_OP_1(0x4E)
/*!< Generic Client Property Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_GEN_CLIENT_PROPERTIES_GET ESP_BLE_MESH_MODEL_OP_1(0x4F)
#define ESP_BLE_MESH_MODEL_OP_GEN_CLIENT_PROPERTIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x50)
/**
* esp_ble_mesh_sensor_message_opcode_t belongs to esp_ble_mesh_opcode_t, this typedef is
* only used to locate the opcodes used by functions esp_ble_mesh_sensor_client_get_state
* & esp_ble_mesh_sensor_client_set_state.
*/
typedef uint32_t esp_ble_mesh_sensor_message_opcode_t;
/*!< Sensor Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_SENSOR_DESCRIPTOR_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x30)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_DESCRIPTOR_STATUS ESP_BLE_MESH_MODEL_OP_1(0x51)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x31)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_STATUS ESP_BLE_MESH_MODEL_OP_1(0x52)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_COLUMN_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x32)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_COLUMN_STATUS ESP_BLE_MESH_MODEL_OP_1(0x53)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_SERIES_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x33)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_SERIES_STATUS ESP_BLE_MESH_MODEL_OP_1(0x54)
/*!< Sensor Setup Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_SENSOR_CADENCE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x34)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_CADENCE_SET ESP_BLE_MESH_MODEL_OP_1(0x55)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_CADENCE_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x56)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_CADENCE_STATUS ESP_BLE_MESH_MODEL_OP_1(0x57)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTINGS_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x35)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTINGS_STATUS ESP_BLE_MESH_MODEL_OP_1(0x58)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTING_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x36)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTING_SET ESP_BLE_MESH_MODEL_OP_1(0x59)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTING_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x5A)
#define ESP_BLE_MESH_MODEL_OP_SENSOR_SETTING_STATUS ESP_BLE_MESH_MODEL_OP_1(0x5B)
/**
* esp_ble_mesh_time_scene_message_opcode_t belongs to esp_ble_mesh_opcode_t, this typedef is
* only used to locate the opcodes used by functions esp_ble_mesh_time_scene_client_get_state
* & esp_ble_mesh_time_scene_client_set_state.
*/
typedef uint32_t esp_ble_mesh_time_scene_message_opcode_t;
/*!< Time Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_TIME_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x37)
#define ESP_BLE_MESH_MODEL_OP_TIME_SET ESP_BLE_MESH_MODEL_OP_1(0x5C)
#define ESP_BLE_MESH_MODEL_OP_TIME_STATUS ESP_BLE_MESH_MODEL_OP_1(0x5D)
#define ESP_BLE_MESH_MODEL_OP_TIME_ROLE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x38)
#define ESP_BLE_MESH_MODEL_OP_TIME_ROLE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x39)
#define ESP_BLE_MESH_MODEL_OP_TIME_ROLE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3A)
#define ESP_BLE_MESH_MODEL_OP_TIME_ZONE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3B)
#define ESP_BLE_MESH_MODEL_OP_TIME_ZONE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3C)
#define ESP_BLE_MESH_MODEL_OP_TIME_ZONE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3D)
#define ESP_BLE_MESH_MODEL_OP_TAI_UTC_DELTA_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3E)
#define ESP_BLE_MESH_MODEL_OP_TAI_UTC_DELTA_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x3F)
#define ESP_BLE_MESH_MODEL_OP_TAI_UTC_DELTA_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x40)
/*!< Scene Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_SCENE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x41)
#define ESP_BLE_MESH_MODEL_OP_SCENE_RECALL ESP_BLE_MESH_MODEL_OP_2(0x82, 0x42)
#define ESP_BLE_MESH_MODEL_OP_SCENE_RECALL_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x43)
#define ESP_BLE_MESH_MODEL_OP_SCENE_STATUS ESP_BLE_MESH_MODEL_OP_1(0x5E)
#define ESP_BLE_MESH_MODEL_OP_SCENE_REGISTER_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x44)
#define ESP_BLE_MESH_MODEL_OP_SCENE_REGISTER_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x45)
/*!< Scene Setup Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_SCENE_STORE ESP_BLE_MESH_MODEL_OP_2(0x82, 0x46)
#define ESP_BLE_MESH_MODEL_OP_SCENE_STORE_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x47)
#define ESP_BLE_MESH_MODEL_OP_SCENE_DELETE ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9E)
#define ESP_BLE_MESH_MODEL_OP_SCENE_DELETE_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9F)
/*!< Scheduler Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_SCHEDULER_ACT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x48)
#define ESP_BLE_MESH_MODEL_OP_SCHEDULER_ACT_STATUS ESP_BLE_MESH_MODEL_OP_1(0x5F)
#define ESP_BLE_MESH_MODEL_OP_SCHEDULER_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x49)
#define ESP_BLE_MESH_MODEL_OP_SCHEDULER_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4A)
/*!< Scheduler Setup Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_SCHEDULER_ACT_SET ESP_BLE_MESH_MODEL_OP_1(0x60)
#define ESP_BLE_MESH_MODEL_OP_SCHEDULER_ACT_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x61)
/**
* esp_ble_mesh_light_message_opcode_t belongs to esp_ble_mesh_opcode_t, this typedef is
* only used to locate the opcodes used by functions esp_ble_mesh_light_client_get_state
* & esp_ble_mesh_light_client_set_state.
*/
typedef uint32_t esp_ble_mesh_light_message_opcode_t;
/*!< Light Lightness Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4B)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4C)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4D)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4E)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LINEAR_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x4F)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LINEAR_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x50)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LINEAR_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x51)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LINEAR_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x52)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LAST_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x53)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_LAST_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x54)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x55)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x56)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x57)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x58)
/*!< Light Lightness Setup Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x59)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5A)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5B)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LIGHTNESS_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5C)
/*!< Light CTL Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5D)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5E)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x5F)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x60)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x61)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x62)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x63)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x64)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x65)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x66)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x67)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x68)
/*!< Light CTL Setup Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x69)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6A)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6B)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_CTL_TEMPERATURE_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6C)
/*!< Light HSL Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6D)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_HUE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6E)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_HUE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x6F)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_HUE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x70)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_HUE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x71)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SATURATION_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x72)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SATURATION_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x73)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SATURATION_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x74)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SATURATION_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x75)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x76)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x77)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x78)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_TARGET_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x79)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_TARGET_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7A)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7B)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7C)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7D)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7E)
/*!< Light HSL Setup Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x7F)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x80)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x81)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_HSL_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x82)
/*!< Light xyL Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x83)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x84)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x85)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x86)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_TARGET_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x87)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_TARGET_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x88)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_DEFAULT_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x89)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_DEFAULT_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8A)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_RANGE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8B)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_RANGE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8C)
/*!< Light xyL Setup Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_DEFAULT_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8D)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_DEFAULT_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8E)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_RANGE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x8F)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_XYL_RANGE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x90)
/*!< Light Control Message Opcode */
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_MODE_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x91)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_MODE_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x92)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_MODE_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x93)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_MODE_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x94)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_OM_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x95)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_OM_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x96)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_OM_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x97)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_OM_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x98)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_LIGHT_ONOFF_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x99)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_LIGHT_ONOFF_SET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9A)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_LIGHT_ONOFF_SET_UNACK ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9B)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_LIGHT_ONOFF_STATUS ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9C)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_PROPERTY_GET ESP_BLE_MESH_MODEL_OP_2(0x82, 0x9D)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_PROPERTY_SET ESP_BLE_MESH_MODEL_OP_1(0x62)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_PROPERTY_SET_UNACK ESP_BLE_MESH_MODEL_OP_1(0x63)
#define ESP_BLE_MESH_MODEL_OP_LIGHT_LC_PROPERTY_STATUS ESP_BLE_MESH_MODEL_OP_1(0x64)
typedef uint32_t esp_ble_mesh_opcode_t;
/*!< End of defines of esp_ble_mesh_opcode_t */
/**
* This typedef is only used to indicate the status code contained in some of the
* server models (e.g. Generic Server Model) status message.
*/
typedef uint8_t esp_ble_mesh_model_status_t;
#define ESP_BLE_MESH_MODEL_STATUS_SUCCESS 0x00
#define ESP_BLE_MESH_MODEL_STATUS_CANNOT_SET_RANGE_MIN 0x01
#define ESP_BLE_MESH_MODEL_STATUS_CANNOT_SET_RANGE_MAX 0x02
/**
* @brief BLE Mesh client models related definitions
*/
/** Client model Get/Set message opcode and corresponding Status message opcode */
typedef struct {
uint32_t cli_op; /*!< The client message opcode */
uint32_t status_op; /*!< The server status opcode corresponding to the client message opcode */
} esp_ble_mesh_client_op_pair_t;
/** Client Model user data context. */
typedef struct {
esp_ble_mesh_model_t *model; /*!< Pointer to the client model. Initialized by the stack. */
int op_pair_size; /*!< Size of the op_pair */
const esp_ble_mesh_client_op_pair_t *op_pair; /*!< Table containing get/set message opcode and corresponding status message opcode */
uint32_t publish_status; /*!< Callback used to handle the received unsolicited message. Initialized by the stack. */
void *internal_data; /*!< Pointer to the internal data of client model */
uint8_t msg_role; /*!< Role of the device (Node/Provisioner) that is going to send messages */
} esp_ble_mesh_client_t;
/** Common parameters of the messages sent by Client Model. */
typedef struct {
esp_ble_mesh_opcode_t opcode; /*!< Message opcode */
esp_ble_mesh_model_t *model; /*!< Pointer to the client model structure */
esp_ble_mesh_msg_ctx_t ctx; /*!< The context used to send message */
int32_t msg_timeout; /*!< Timeout value (ms) to get response to the sent message */
/*!< Note: if using default timeout value in menuconfig, make sure to set this value to 0 */
uint8_t msg_role; /*!< Role of the device - Node/Provisioner */
} esp_ble_mesh_client_common_param_t;
/**
* @brief BLE Mesh server models related definitions
*/
/** This enum value is the flag of transition timer operation */
enum {
ESP_BLE_MESH_SERVER_TRANS_TIMER_START, /* Proper transition timer has been started */
ESP_BLE_MESH_SERVER_FLAG_MAX,
};
/** Parameters of the server model state transition */
typedef struct {
bool just_started; /*!< Indicate if the state transition has just started */
uint8_t trans_time; /*!< State transition time */
uint8_t remain_time; /*!< Remaining time of state transition */
uint8_t delay; /*!< Delay before starting state transition */
uint32_t quo_tt; /*!< Duration of each divided transition step */
uint32_t counter; /*!< Number of steps which the transition duration is divided */
uint32_t total_duration; /*!< State transition total duration */
int64_t start_timestamp; /*!< Time when the state transition is started */
/**
* Flag used to indicate if the transition timer has been started internally.
*
* If the model which contains esp_ble_mesh_state_transition_t sets "set_auto_rsp"
* to ESP_BLE_MESH_SERVER_RSP_BY_APP, the handler of the timer shall be initialized
* by the users.
*
* And users can use this flag to indicate whether the timer is started or not.
*/
BLE_MESH_ATOMIC_DEFINE(flag, ESP_BLE_MESH_SERVER_FLAG_MAX);
struct k_delayed_work timer; /*!< Timer used for state transition */
} esp_ble_mesh_state_transition_t;
/** Parameters of the server model received last same set message. */
typedef struct {
uint8_t tid; /*!< Transaction number of the last message */
uint16_t src; /*!< Source address of the last message */
uint16_t dst; /*!< Destination address of the last message */
int64_t timestamp; /*!< Time when the last message is received */
} esp_ble_mesh_last_msg_info_t;
#define ESP_BLE_MESH_SERVER_RSP_BY_APP 0 /*!< Response need to be sent in the application */
#define ESP_BLE_MESH_SERVER_AUTO_RSP 1 /*!< Response will be sent internally */
/** Parameters of the Server Model response control */
typedef struct {
/**
* @brief BLE Mesh Server Response Option
* 1. If get_auto_rsp is set to ESP_BLE_MESH_SERVER_RSP_BY_APP, then the
* response of Client Get messages need to be replied by the application;
* 2. If get_auto_rsp is set to ESP_BLE_MESH_SERVER_AUTO_RSP, then the
* response of Client Get messages will be replied by the server models;
* 3. If set_auto_rsp is set to ESP_BLE_MESH_SERVER_RSP_BY_APP, then the
* response of Client Set messages need to be replied by the application;
* 4. If set_auto_rsp is set to ESP_BLE_MESH_SERVER_AUTO_RSP, then the
* response of Client Set messages will be replied by the server models;
* 5. If status_auto_rsp is set to ESP_BLE_MESH_SERVER_RSP_BY_APP, then the
* response of Server Status messages need to be replied by the application;
* 6. If status_auto_rsp is set to ESP_BLE_MESH_SERVER_AUTO_RSP, then the
* response of Server Status messages will be replied by the server models;
*/
uint8_t get_auto_rsp : 1, /*!< Response control for Client Get messages */
set_auto_rsp : 1, /*!< Response control for Client Set messages */
status_auto_rsp : 1; /*!< Response control for Server Status messages */
} esp_ble_mesh_server_rsp_ctrl_t;
/**
* @brief Server model state value union
*/
typedef union {
struct {
uint8_t onoff; /*!< The value of the Generic OnOff state */
} gen_onoff; /*!< The Generic OnOff state */
struct {
int16_t level; /*!< The value of the Generic Level state */
} gen_level; /*!< The Generic Level state */
struct {
uint8_t onpowerup; /*!< The value of the Generic OnPowerUp state */
} gen_onpowerup; /*!< The Generic OnPowerUp state */
struct {
uint16_t power; /*!< The value of the Generic Power Actual state */
} gen_power_actual; /*!< The Generic Power Actual state */
struct {
uint16_t lightness; /*!< The value of the Light Lightness Actual state */
} light_lightness_actual; /*!< The Light Lightness Actual state */
struct {
uint16_t lightness; /*!< The value of the Light Lightness Linear state */
} light_lightness_linear; /*!< The Light Lightness Linear state */
struct {
uint16_t lightness; /*!< The value of the Light CTL Lightness state */
} light_ctl_lightness; /*!< The Light CTL Lightness state */
struct {
uint16_t temperature; /*!< The value of the Light CTL Temperature state */
int16_t delta_uv; /*!< The value of the Light CTL Delta UV state */
} light_ctl_temp_delta_uv; /*!< The Light CTL Temperature & Delta UV states */
struct {
uint16_t lightness; /*!< The value of the Light HSL Lightness state */
uint16_t hue; /*!< The value of the Light HSL Hue state */
uint16_t saturation; /*!< The value of the Light HSL Saturation state */
} light_hsl; /*!< The Light HSL composite state */
struct {
uint16_t lightness; /*!< The value of the Light HSL Lightness state */
} light_hsl_lightness; /*!< The Light HSL Lightness state */
struct {
uint16_t hue; /*!< The value of the Light HSL Hue state */
} light_hsl_hue; /*!< The Light HSL Hue state */
struct {
uint16_t saturation; /*!< The value of the Light HSL Saturation state */
} light_hsl_saturation; /*!< The Light HSL Saturation state */
struct {
uint16_t lightness; /*!< The value of the Light xyL Lightness state */
} light_xyl_lightness; /*!< The Light xyL Lightness state */
struct {
uint8_t onoff; /*!< The value of the Light LC Light OnOff state */
} light_lc_light_onoff; /*!< The Light LC Light OnOff state */
} esp_ble_mesh_server_state_value_t;
/** This enum value is the type of server model states */
typedef enum {
ESP_BLE_MESH_GENERIC_ONOFF_STATE,
ESP_BLE_MESH_GENERIC_LEVEL_STATE,
ESP_BLE_MESH_GENERIC_ONPOWERUP_STATE,
ESP_BLE_MESH_GENERIC_POWER_ACTUAL_STATE,
ESP_BLE_MESH_LIGHT_LIGHTNESS_ACTUAL_STATE,
ESP_BLE_MESH_LIGHT_LIGHTNESS_LINEAR_STATE,
ESP_BLE_MESH_LIGHT_CTL_LIGHTNESS_STATE,
ESP_BLE_MESH_LIGHT_CTL_TEMP_DELTA_UV_STATE,
ESP_BLE_MESH_LIGHT_HSL_STATE,
ESP_BLE_MESH_LIGHT_HSL_LIGHTNESS_STATE,
ESP_BLE_MESH_LIGHT_HSL_HUE_STATE,
ESP_BLE_MESH_LIGHT_HSL_SATURATION_STATE,
ESP_BLE_MESH_LIGHT_XYL_LIGHTNESS_STATE,
ESP_BLE_MESH_LIGHT_LC_LIGHT_ONOFF_STATE,
ESP_BLE_MESH_SERVER_MODEL_STATE_MAX,
} esp_ble_mesh_server_state_type_t;
/*!< This enum value is the event of undefined SIG models and vendor models */
typedef enum {
ESP_BLE_MESH_MODEL_OPERATION_EVT, /*!< User-defined models receive messages from peer devices (e.g. get, set, status, etc) event */
ESP_BLE_MESH_MODEL_SEND_COMP_EVT, /*!< User-defined models send messages completion event */
ESP_BLE_MESH_MODEL_PUBLISH_COMP_EVT, /*!< User-defined models publish messages completion event */
ESP_BLE_MESH_CLIENT_MODEL_RECV_PUBLISH_MSG_EVT, /*!< User-defined client models receive publish messages event */
ESP_BLE_MESH_CLIENT_MODEL_SEND_TIMEOUT_EVT, /*!< Timeout event for the user-defined client models that failed to receive response from peer server models */
ESP_BLE_MESH_MODEL_PUBLISH_UPDATE_EVT, /*!< When a model is configured to publish messages periodically, this event will occur during every publish period */
ESP_BLE_MESH_SERVER_MODEL_UPDATE_STATE_COMP_EVT, /*!< Server models update state value completion event */
ESP_BLE_MESH_MODEL_EVT_MAX,
} esp_ble_mesh_model_cb_event_t;
/**
* @brief BLE Mesh model callback parameters union
*/
typedef union {
/**
* @brief ESP_BLE_MESH_MODEL_OPERATION_EVT
*/
struct ble_mesh_model_operation_evt_param {
uint32_t opcode; /*!< Opcode of the received message */
esp_ble_mesh_model_t *model; /*!< Pointer to the model which receives the message */
esp_ble_mesh_msg_ctx_t *ctx; /*!< Pointer to the context of the received message */
uint16_t length; /*!< Length of the received message */
uint8_t *msg; /*!< Value of the received message */
} model_operation; /*!< Event parameter of ESP_BLE_MESH_MODEL_OPERATION_EVT */
/**
* @brief ESP_BLE_MESH_MODEL_SEND_COMP_EVT
*/
struct ble_mesh_model_send_comp_param {
int err_code; /*!< Indicate the result of sending a message */
uint32_t opcode; /*!< Opcode of the message */
esp_ble_mesh_model_t *model; /*!< Pointer to the model which sends the message */
esp_ble_mesh_msg_ctx_t *ctx; /*!< Context of the message */
} model_send_comp; /*!< Event parameter of ESP_BLE_MESH_MODEL_SEND_COMP_EVT */
/**
* @brief ESP_BLE_MESH_MODEL_PUBLISH_COMP_EVT
*/
struct ble_mesh_model_publish_comp_param {
int err_code; /*!< Indicate the result of publishing a message */
esp_ble_mesh_model_t *model; /*!< Pointer to the model which publishes the message */
} model_publish_comp; /*!< Event parameter of ESP_BLE_MESH_MODEL_PUBLISH_COMP_EVT */
/**
* @brief ESP_BLE_MESH_CLIENT_MODEL_RECV_PUBLISH_MSG_EVT
*/
struct ble_mesh_mod_recv_publish_msg_param {
uint32_t opcode; /*!< Opcode of the unsolicited received message */
esp_ble_mesh_model_t *model; /*!< Pointer to the model which receives the message */
esp_ble_mesh_msg_ctx_t *ctx; /*!< Pointer to the context of the message */
uint16_t length; /*!< Length of the received message */
uint8_t *msg; /*!< Value of the received message */
} client_recv_publish_msg; /*!< Event parameter of ESP_BLE_MESH_CLIENT_MODEL_RECV_PUBLISH_MSG_EVT */
/**
* @brief ESP_BLE_MESH_CLIENT_MODEL_SEND_TIMEOUT_EVT
*/
struct ble_mesh_client_model_send_timeout_param {
uint32_t opcode; /*!< Opcode of the previously sent message */
esp_ble_mesh_model_t *model; /*!< Pointer to the model which sends the previous message */
esp_ble_mesh_msg_ctx_t *ctx; /*!< Pointer to the context of the previous message */
} client_send_timeout; /*!< Event parameter of ESP_BLE_MESH_CLIENT_MODEL_SEND_TIMEOUT_EVT */
/**
* @brief ESP_BLE_MESH_MODEL_PUBLISH_UPDATE_EVT
*/
struct ble_mesh_model_publish_update_evt_param {
esp_ble_mesh_model_t *model; /*!< Pointer to the model which is going to update its publish message */
} model_publish_update; /*!< Event parameter of ESP_BLE_MESH_MODEL_PUBLISH_UPDATE_EVT */
/**
* @brief ESP_BLE_MESH_SERVER_MODEL_UPDATE_STATE_COMP_EVT
*/
struct ble_mesh_server_model_update_state_comp_param {
int err_code; /*!< Indicate the result of updating server model state */
esp_ble_mesh_model_t *model; /*!< Pointer to the server model which state value is updated */
esp_ble_mesh_server_state_type_t type; /*!< Type of the updated server state */
} server_model_update_state; /*!< Event parameter of ESP_BLE_MESH_SERVER_MODEL_UPDATE_STATE_COMP_EVT */
} esp_ble_mesh_model_cb_param_t;
#ifdef __cplusplus
}
#endif
#endif /* _ESP_BLE_MESH_DEFS_H_ */
@Brandon-Magnan
Copy link

Good morning. Is there a way you can provide these updated libraries for me to use in my Arduino environment? I only run Windows so being able to compile the libraries would be a bit of a pain. I would really like to get the mesh example working in Arduino for my ESP32-C3

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment