Baofeng BF888S default frequencies

BF888S_default_01012019.csv

I just got brand new BF-888S's and a brand new UV-9R plus and can confirm that these work in getting the BF-888S's to speak to the UV-9R plus. Thanks a lot for this :)

At least channel 16 data here works in UV-5R both tx/rx , so a big thank you. After setting frequency, I just had to set T-CTCS for ToneSql value, and left the rest settings as they are. Other channels yet to test.

Hi, everybody.
I'm a little late... (grin) but maybe this is useful for someone...
I just saved the preset frequencies of the Baofeng BF-888s, using CHIRP, then copied each channel, from 1 to 16, to the channels 101 to 116 in my UV-5R. It's working perfectly.
Regards from Brazil

Location,Name,Frequency,Duplex,Offset,Tone,rToneFreq,cToneFreq,DtcsCode,DtcsPolarity,Mode,TStep,Skip,Comment,URCALL,RPT1CALL,RPT2CALL,DVCODE
0,,146.010000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,,
1,,452.125000,,0.000000,TSQL,69.3,69.3,023,NN,FM,5.00,,,,,,
2,,453.225000,,0.000000,TSQL,91.5,91.5,023,NN,FM,5.00,,,,,,
3,,454.325000,,0.000000,TSQL,136.5,136.5,023,NN,FM,5.00,,,,,,
4,,455.425000,,0.000000,TSQL,151.4,151.4,023,NN,FM,5.00,,,,,,
5,,456.525000,,0.000000,TSQL,192.8,192.8,023,NN,FM,5.00,,,,,,
6,,457.625000,,0.000000,TSQL,241.8,241.8,023,NN,FM,5.00,,,,,,
7,,458.725000,,0.000000,DTCS,88.5,88.5,025,NN,FM,5.00,,,,,,
8,,459.825000,,0.000000,DTCS,88.5,88.5,134,NN,FM,5.00,,,,,,
9,,461.925000,,0.000000,DTCS,88.5,88.5,274,NN,FM,5.00,,,,,,
10,,462.225000,,0.000000,DTCS,88.5,88.5,346,NN,FM,5.00,,,,,,
11,,463.325000,,0.000000,DTCS,88.5,88.5,503,NN,FM,5.00,,,,,,
12,,464.425000,,0.000000,DTCS,88.5,88.5,073,RR,FM,5.00,,,,,,
13,,465.525000,,0.000000,DTCS,88.5,88.5,703,RR,FM,5.00,,,,,,
14,,402.225000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
15,,437.425000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
16,,479.975000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
17,,138.550000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
18,,157.650000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
19,,172.750000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
20,,438.500000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
21,,155.700000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
101,,462.125000,,0.000000,TSQL,69.3,69.3,023,NN,FM,5.00,,,,,,
102,,462.225000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
103,,462.325000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
104,,462.425000,,0.000000,TSQL,103.5,103.5,023,NN,FM,5.00,,,,,,
105,,462.525000,,0.000000,TSQL,114.8,114.8,023,NN,FM,5.00,,,,,,
106,,462.625000,,0.000000,TSQL,127.3,127.3,023,NN,FM,5.00,,,,,,
107,,462.725000,,0.000000,TSQL,136.5,136.5,023,NN,FM,5.00,,,,,,
108,,462.825000,,0.000000,TSQL,162.2,162.2,023,NN,FM,5.00,,,,,,
109,,462.925000,,0.000000,DTCS,88.5,88.5,025,NN,FM,5.00,,,,,,
110,,463.025000,,0.000000,DTCS,88.5,88.5,051,NN,FM,5.00,,,,,,
111,,463.125000,,0.000000,DTCS,88.5,88.5,125,NN,FM,5.00,,,,,,
112,,463.225000,,0.000000,DTCS,88.5,88.5,155,RR,FM,5.00,,,,,,
113,,463.525000,,0.000000,DTCS,88.5,88.5,465,RR,FM,5.00,,,,,,
114,,450.225000,,0.000000,DTCS,88.5,88.5,023,NN,FM,5.00,,,,,,
115,,460.325000,,0.000000,,88.5,88.5,023,NN,FM,5.00,,,,,,
116,,469.950000,,0.000000,TSQL,203.5,203.5,023,NN,FM,5.00,,,,,,

I extracted these from the Baofeng BF-888S radio sets in my country (PK). Programmed these settings in my UV-82HP and it works perfectly on all 16 channels

Location	Name	Frequency	Duplex	Offset	Tone	rToneFreq	cToneFreq	DtcsCode	DtcsPolarity	RxDtcsCode	CrossMode	Mode	TStep	Skip	Power	Comment	URCALL	RPT1CALL	RPT2CALL	DVCODE
1		435.125		0	TSQL	88.5	69.3	23	NN	23	Tone->Tone	FM	5	S	5.0W
2		435.225		0		88.5	88.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
3		435.325		0		88.5	88.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
4		435.425		0	TSQL	88.5	103.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
5		435.525		0	TSQL	88.5	114.8	23	NN	23	Tone->Tone	FM	5	S	5.0W
6		435.625		0	TSQL	88.5	127.3	23	NN	23	Tone->Tone	FM	5	S	5.0W
7		435.725		0		88.5	88.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
8		435.825		0	TSQL	88.5	162.2	23	NN	23	Tone->Tone	FM	5	S	5.0W
9		435.925		0	DTCS	88.5	88.5	25	NN	23	Tone->Tone	FM	5	S	5.0W
10		438.025		0		88.5	88.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
11		438.125		0	DTCS	88.5	88.5	125	NN	23	Tone->Tone	FM	5	S	5.0W
12		438.225		0	DTCS	88.5	88.5	155	RR	23	Tone->Tone	FM	5	S	5.0W
13		438.325		0	DTCS	88.5	88.5	465	RR	23	Tone->Tone	FM	5	S	5.0W
14		438.425		0	DTCS	88.5	88.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
15		438.525		0		88.5	88.5	23	NN	23	Tone->Tone	FM	5	S	5.0W
16		440.95		0	TSQL	88.5	203.5	23	NN	23	Tone->Tone	FM	5	S	5.0W

Thanks for this

Let me start by saying, “Yes” I have read this and other posts. It is not my intent to violate the FCC’s laws/rules. But, being an analytical type of person, I need to know the “Why”.
I have a few Baofeng BF8888s. I used the latest version of CHIRP Next to pull the channel list off the 888s.

I have a Baofeng GT-5TP. I learned you can program the GT-5TP using CHIRP by setting the type of radio to UV-82HP. I have been able to pull the programming table off and reload it. No problem

I loaded the 888s frequencies onto my GT-5TP. Again, I trying to figure out the “WHY”.
I can hear some of the channels on the GT-5TP when I transmit on my 888, but not all of them. WHY? Also, I can’t hear anything on my 888 if I transmit from the GT-5TP. It is as if it is not transmitting at all. When I push the PPT button I don’t get the orange transmitting light. Did I miss a configuration somewhere? Or is the GT-5TP built so that it cannot transmit on FRS/GMRA channels to be compliant with the FCC rules? Again, I do not intend to use the GT-5TP unlawfully. This is purely academic. Does anyone have any ideas?

I loaded the 888s frequencies onto my GT-5TP. Again, I trying to figure out the “WHY”. I can hear some of the channels on the GT-5TP when I transmit on my 888, but not all of them. WHY? Also, I can’t hear anything on my 888 if I transmit from the GT-5TP. It is as if it is not transmitting at all. When I push the PPT button I don’t get the orange transmitting light. Did I miss a configuration somewhere? Or is the GT-5TP built so that it cannot transmit on FRS/GMRA channels to be compliant with the FCC rules? Again, I do not intend to use the GT-5TP unlawfully. This is purely academic. Does anyone have any ideas?

Hello there. After checking the GT-5TP specs it says "Frequency Range: VHF 144-148MHz (TX/RX); UHF: 420-450MHz(TX/RX)".
Could this be purely a hardware issue on the GT-5TP side of things? None of the 888s listed frequencies are within the 420-450 range.

Let me start by saying, “Yes” I have read this and other posts. It is not my intent to violate the FCC’s laws/rules. But, being an analytical type of person, I need to know the “Why”. I have a few Baofeng BF8888s. I used the latest version of CHIRP Next to pull the channel list off the 888s.

I have a Baofeng GT-5TP. I learned you can program the GT-5TP using CHIRP by setting the type of radio to UV-82HP. I have been able to pull the programming table off and reload it. No problem

I loaded the 888s frequencies onto my GT-5TP. Again, I trying to figure out the “WHY”. I can hear some of the channels on the GT-5TP when I transmit on my 888, but not all of them. WHY? Also, I can’t hear anything on my 888 if I transmit from the GT-5TP. It is as if it is not transmitting at all. When I push the PPT button I don’t get the orange transmitting light. Did I miss a configuration somewhere? Or is the GT-5TP built so that it cannot transmit on FRS/GMRA channels to be compliant with the FCC rules? Again, I do not intend to use the GT-5TP unlawfully. This is purely academic. Does anyone have any ideas?

I finally figured it out. The GT-5TP sold in the USA has a software block. The only way to use the above-listed frequencies is to jailbreak the phone back to default. So, in theory, if you revert to the original default you can transmit on the above-listed channels.
Regards,

anyone know the frequencies of vertel team talkie channels , need to connect with my uv5r please guide me.

Hi may know who have correct file to clone from BF-888S to UV-82 , Thanks.

Hi guys, will programing these frequencies into my baofeng uv5r work?
meaning will I be able toe communicate with the 888s and other like radios?

Anyone have an .img with the 446 frequencies in Portugal?

Anyone have an .img with the 446 frequencies in Portugal?

Here is an article about PMR 446 frequencies with a complete table of channels. In Portugal, like in other countries, is 446.00625–446.19375 MHz. Here you can check, if it's LPD and PMR are license-free your country