Overleaf's latexmkrc

latexmkrc

###############################
# Post processing of pdf file #
###############################

# assume the jobname is 'output' for Overleaf v2
my $ORIG_PDF_AGE = -M "output.pdf"; # get age of existing pdf if present

END {
    my $NEW_PDF_AGE = -M "output.pdf";
    return if !defined($NEW_PDF_AGE); # bail out if no pdf file
    return if defined($ORIG_PDF_AGE) && $NEW_PDF_AGE == $ORIG_PDF_AGE; # bail out if pdf was not updated
    my $QPDF = "/usr/bin/qpdf";
    return if ! -x $QPDF; # check that qpdf exists
    my $status = system($QPDF, "--linearize", "output.pdf", "output.pdf.opt");
    my $exitcode = ($status >> 8);
    print "qpdf exit code=$exitcode\n";
    # qpdf returns 0 for success, 3 for warnings (output pdf still created)
    return if !($exitcode == 0 || $exitcode == 3);
    print "Renaming optimised file to output.pdf\n";
    rename("output.pdf.opt", "output.pdf");
}

##############
# Glossaries #
##############
add_cus_dep( 'glo', 'gls', 0, 'glo2gls' );
add_cus_dep( 'acn', 'acr', 0, 'glo2gls');  # from Overleaf v1
sub glo2gls {
	system("makeglossaries $_[0]");
}

#############
# makeindex #
#############
@ist = glob("*.ist");
if (scalar(@ist) > 0) {
        $makeindex = "makeindex -s $ist[0] %O -o %D %S";
}

################
# nomenclature #
################
add_cus_dep("nlo", "nls", 0, "nlo2nls");
sub nlo2nls {
	system("makeindex $_[0].nlo -s nomencl.ist -o $_[0].nls -t $_[0].nlg");
}

#########
# Knitr #
#########
my $root_file = $ARGV[-1];

add_cus_dep( 'Rtex', 'tex', 0, 'rtex_to_tex');
sub rtex_to_tex {
    do_knitr("$_[0].Rtex");
}

sub do_knitr {
    my $dirname = dirname $_[0];
    my $basename = basename $_[0];
    system("Rscript -e \"library('knitr'); setwd('$dirname'); knit('$basename')\"");
}

my $rtex_file = $root_file =~ s/\.tex$/.Rtex/r;
unless (-e $root_file) {
	if (-e $rtex_file) {
		do_knitr($rtex_file);
	}
}

##########
# feynmf #
##########
push(@file_not_found, '^feynmf: Files .* and (.*) not found:$');
add_cus_dep("mf", "tfm", 0, "mf_to_tfm");
sub mf_to_tfm { system("mf '\\mode:=laserjet; input $_[0]'"); }

push(@file_not_found, '^feynmf: Label file (.*) not found:$');
add_cus_dep("mf", "t1", 0, "mf_to_label1");
sub mf_to_label1 { system("mf '\\mode:=laserjet; input $_[0]' && touch $_[0].t1"); }
add_cus_dep("mf", "t2", 0, "mf_to_label2");
sub mf_to_label2 { system("mf '\\mode:=laserjet; input $_[0]' && touch $_[0].t2"); }
add_cus_dep("mf", "t3", 0, "mf_to_label3");
sub mf_to_label3 { system("mf '\\mode:=laserjet; input $_[0]' && touch $_[0].t3"); }
add_cus_dep("mf", "t4", 0, "mf_to_label4");
sub mf_to_label4 { system("mf '\\mode:=laserjet; input $_[0]' && touch $_[0].t4"); }
add_cus_dep("mf", "t5", 0, "mf_to_label5");
sub mf_to_label5 { system("mf '\\mode:=laserjet; input $_[0]' && touch $_[0].t5"); }
add_cus_dep("mf", "t6", 0, "mf_to_label6");
sub mf_to_label6 { system("mf '\\mode:=laserjet; input $_[0]' && touch $_[0].t6"); }
add_cus_dep("mf", "t7", 0, "mf_to_label7");
sub mf_to_label7 { system("mf '\\mode:=laserjet; input $_[0]' && touch $_[0].t7"); }
add_cus_dep("mf", "t8", 0, "mf_to_label8");
sub mf_to_label8 { system("mf '\\mode:=laserjet; input $_[0]' && touch $_[0].t8"); }
add_cus_dep("mf", "t9", 0, "mf_to_label9");
sub mf_to_label9 { system("mf '\\mode:=laserjet; input $_[0]' && touch $_[0].t9"); }

##########
# feynmp #
##########
push(@file_not_found, '^dvipdf: Could not find figure file (.*); continuing.$');
add_cus_dep("mp", "1", 0, "mp_to_eps");
sub mp_to_eps {
    system("mpost $_[0]");
    return 0;
}

#############
# asymptote #
#############
sub asy {return system("asy --offscreen '$_[0]'");}
add_cus_dep("asy","eps",0,"asy");
add_cus_dep("asy","pdf",0,"asy");
add_cus_dep("asy","tex",0,"asy");

#############
# metapost  #  # from Overleaf v1
#############
add_cus_dep('mp', '1', 0, 'mpost');
sub mpost {
  my $file = $_[0];
  my ($name, $path) = fileparse($file);
  pushd($path);
  my $return = system "mpost $name";
  popd();
  return $return;
}

##########
# chktex #
##########
unlink 'output.chktex' if -f 'output.chktex';
if (defined $ENV{'CHKTEX_OPTIONS'}) {
    use File::Basename;
    use Cwd;

    # identify the main file
    my $target = $ARGV[-1];
    my $file = basename($target);

    if ($file =~ /\.tex$/) {
	# change directory for a limited scope
	my $orig_dir = cwd();
	my $subdir = dirname($target);
	chdir($subdir);
	# run chktex on main file
	$status = system(
    "/usr/bin/run-chktex.sh",
    $orig_dir,
    $file
  );
	# go back to original directory
	chdir($orig_dir);

	# in VALIDATE mode we always exit after running chktex
	# otherwise we exit if EXIT_ON_ERROR is set

	if ($ENV{'CHKTEX_EXIT_ON_ERROR'} || $ENV{'CHKTEX_VALIDATE'}) {
	    # chktex doesn't let us access the error info via exit status
	    # so look through the output
	    open(my $fh, "<", "output.chktex");
	    my $errors = 0;
	    {
		local $/ = "\n";
		while(<$fh>) {
		    if (/^\S+:\d+:\d+: Error:/) {
			$errors++;
			print;
		    }
		}
	    }
	    close($fh);
	    exit(1) if $errors > 0;
	    exit(0) if $ENV{'CHKTEX_VALIDATE'};
	}
    }
}