Skip to content

Instantly share code, notes, and snippets.

View jamgregory's full-sized avatar
🚊

James Gregory-Monk jamgregory

🚊
View GitHub Profile
@aaroncoffey
aaroncoffey / Puppet_6.3_Raspbian.md
Last active April 22, 2023 15:08
How to get puppet 6.3 up and running on a raspberry pi running Raspbian

How to get puppet 6.3 up and running on a raspberry pi running raspbian.

These instructions were tested on a pi 3 with the latest version of raspbian (Raspbian GNU/Linux 9.8 (stretch)).

This guide assumes basic competency with the command line. It also assumes you have a functional puppet master set up with the hostname of puppet. If you can ping puppet, you should be all set. Also note that I am just getting into puppet and am not a master of this domain. There may be errors, and there is probably a better way to do this, but in my searching, I was unable to locate a good set of instructions to get this working, so here we are. Feel free to contact me for corrections.

You can either switch to root sudo -i, or prepend all the following commands with sudo.

Update first

apt update
@r00takaspin
r00takaspin / puma.service
Created May 11, 2018 15:29
Run puma web server with RVM from systemd
[Unit]
Description=Puma HTTP Server
After=network.target
# Uncomment for socket activation (see below)
# Requires=puma.socket
[Service]
# Foreground process (do not use --daemon in ExecStart or config.rb)
Type=simple
@DennisLfromGA
DennisLfromGA / enable-vmx.sh
Last active May 5, 2017 00:35
ChromeOS script to re-write the current kernel configuration to enable VT-x extensions and lsm.module locking for virtualbox/virtualization. Based on steps provided by @zwxfzzzjr on the crouton github site here - https://github.com/dnschneid/crouton/issues/675#issuecomment-40567742
#!/bin/sh -e
C_ROOT=''
C_KERNEL=''
##
## Exits the script with exit code $1, spitting out message $@ to stderr
error() {
local ecode="$1"
shift
echo "$*" 1>&2
exit "$ecode"
@BlakeGardner
BlakeGardner / compact.js
Last active October 10, 2024 11:19
Compact all collections inside of a MongoDB database
// This script loops though the list of collection names in a MongoDB and runs the compact operation on them
// Simply paste this into the Mongo shell
use testDbName;
db.getCollectionNames().forEach(function (collectionName) {
print('Compacting: ' + collectionName);
db.runCommand({ compact: collectionName });
});
@drinkcat
drinkcat / resetpart.sh
Created November 4, 2013 15:13
Resize stateful partition
#!/bin/sh
# Reset partition format (Samsung ARM Chromebook only!)
cgpt add -i 13 -t unused /dev/mmcblk0
cgpt add -i 1 -s 22073344 /dev/mmcblk0
partprobe /dev/mmcblk0
# We could resize2fs here, maybe after next reboot
@bfg
bfg / apache-2.2-mod_remoteip.c
Created June 23, 2011 09:32
Working backport (doesn't crash when using Allow/Deny ACLs) of Apache 2.3 module mod_remoteip to Apache 2.2.x
/* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software