DeskHub Setup Guide

README.md

Here’s the updated instructions and checklist, now combined with a clear explanation of NFC in a

DeskHub Device Setup and NFC Automation Guide

Welcome to DeskHub! Follow these instructions to set up your device and configure the NFC-based automation for Do Not Disturb (DND) mode.

---

What is NFC?

NFC (Near Field Communication) is a short-range wireless communication technology that allows devices to exchange information over very short distances, typically a few centimeters.

How NFC Works:

1. Built-In NFC Reader: Your phone (or another NFC-enabled device) has an NFC reader built in. On iPhones, the reader is located near the top of the device.
2. Proximity: NFC works when your phone is held close—within a few centimeters—of an NFC tag.
3. Electromagnetic Induction: The phone's NFC reader creates a small electromagnetic field that powers the NFC tag.
4. Data Transmission: The NFC tag sends its data (like a URL, text, or command) back to the phone, which interprets it and performs an action.
5. Triggering Automation: In this setup, the NFC tag on the DeskHub triggers a shortcut on your phone to toggle the Do Not Disturb mode.

For NFC to work, your phone needs to be aligned correctly with the NFC tag. Hold the phone at the top center of the DeskHub to locate the tag.

---

Device Setup

Follow these steps to connect your DeskHub to a Wi-Fi network and set it up:

1. Use a USB-to-USB-C cable, such as the one included with your DeskHub.
2. Connect to the DeskHub Wi-Fi network on your phone or laptop.
3. Open a web browser on your phone or laptop and enter the IP address displayed on the DeskHub screen.
4. You're now connected to the DeskHub - but need to re-connect to your home Wi-Fi network to access Github.
5. DeskHub will search for nearby Wi-Fi networks (this takes about 10 seconds).
   • If entering Wi-Fi details manually, ensure the Wi-Fi SSID is case-sensitive and exact.
6. Enter your GitHub username exactly as it appears and press Submit.

---

Do Not Disturb (DND) NFC Setup

This setup allows you to toggle Do Not Disturb mode by tapping your phone on the DeskHub’s NFC tag.

1. Open the Shortcuts app on your iPhone.
2. Tap the + icon in the top-right corner to create a new shortcut.
3. Press Add Action.
4. Search for Set Focus and select it under the Scripting category.
5. Change Turn to Toggle.
6. Select Do Not Disturb or set up a custom focus mode.
7. Rename the automation to DND:
   • Tap Set Focus at the top and edit the name.
8. Click Done and test the setup:
   • Hold your phone near the center top of the DeskHub where the NFC tag is located.
   • It may take a few tries to locate the NFC reader on your phone and align it correctly with the tag.

---

Checklist

Device Setup

• Use a USB-to-USB-C cable (e.g., the included cable).
• Connect to the DeskHub Wi-Fi network on your phone or laptop.
• Enter the IP address displayed on the DeskHub into your browser.
• Wait 10 seconds for DeskHub to search for nearby Wi-Fi networks.
  • If entering manually, ensure the Wi-Fi SSID is case-sensitive and exact.
• Enter your GitHub username exactly and press Submit.

Do Not Disturb (DND) NFC Setup

• Open the Shortcuts app on your iPhone.
• Tap the + icon to create a new shortcut.
• Select Add Action.
• Search for Set Focus and select it under Scripting.
• Change Turn to Toggle.
• Choose Do Not Disturb or a custom focus mode.
• Rename the automation to DND by editing the name at the top.
• Test the NFC setup:
  • Hold your phone at the center of the top of your DeskHub.
  • Align the phone's NFC reader with the DeskHub tag (may take a few tries).