Created
September 25, 2020 10:24
-
-
Save hannesweisbach/ae4dfeb4be195786e8fa5b6f9eee28ac to your computer and use it in GitHub Desktop.
pcb2gcode bug
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ( pcb2gcode 2.1.0 ) | |
| ( Software-independent Gcode ) | |
| G94 ( Millimeters per minute feed rate. ) | |
| G21 ( Units == Millimeters. ) | |
| G90 ( Absolute coordinates. ) | |
| G00 S30000 ( RPM spindle speed. ) | |
| G64 P0.01016 ( set maximum deviation from commanded toolpath ) | |
| G01 F80.00000 ( Feedrate. ) | |
| G00 Z15.00000 (Retract to tool change height) | |
| T0 | |
| M5 (Spindle stop.) | |
| G04 P1.00000 (Wait for spindle to stop) | |
| (MSG, Change tool bit to mill diameter 1.25000mm) | |
| M6 (Tool change.) | |
| M0 (Temporary machine stop.) | |
| M3 ( Spindle on clockwise. ) | |
| G04 P1.00000 (Wait for spindle to get up to speed) | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z1.00000 ( retract ) | |
| G00 X36.83000 Y-20.32000 ( rapid move to begin. ) | |
| G01 F40.00000 | |
| ( Mill infeed pass 1/2 ) | |
| G01 Z-0.03000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X36.83000 Y-20.32000 | |
| G01 X36.83000 Y-13.33500 | |
| G01 X38.32553 Y-13.33500 | |
| G01 X38.29147 Y-13.37653 | |
| G01 X38.01930 Y-13.78397 | |
| G01 X37.97310 Y-13.87041 | |
| G01 X37.78565 Y-14.32311 | |
| G01 X37.75720 Y-14.41689 | |
| G01 X37.66162 Y-14.89746 | |
| G01 X37.65202 Y-14.99499 | |
| G01 X37.63998 Y-15.24000 | |
| G01 X37.63998 Y-17.61998 | |
| G01 X37.65202 Y-17.86496 | |
| G01 X37.66162 Y-17.96250 | |
| G01 X37.75720 Y-18.44307 | |
| G01 X37.78565 Y-18.53684 | |
| G01 X37.97310 Y-18.98955 | |
| G01 X38.01930 Y-19.07598 | |
| G01 X38.29147 Y-19.48343 | |
| G01 X38.35362 Y-19.55917 | |
| G01 X38.51834 Y-19.74096 | |
| G01 X38.59832 Y-19.82097 | |
| G01 X38.80213 Y-20.00524 | |
| G01 X39.11956 Y-20.23590 | |
| G01 X39.18646 Y-20.27692 | |
| G01 X39.27097 Y-20.31997 | |
| G01 X48.26000 Y-20.32000 | |
| G01 X48.25997 Y-18.29336 | |
| G01 X48.25997 Y-20.06628 | |
| G01 X48.09762 Y-20.14901 | |
| G01 X47.93529 Y-20.22130 | |
| G01 X47.75205 Y-20.29163 | |
| G01 X47.64618 Y-20.31997 | |
| G01 X46.17380 Y-20.31997 | |
| G01 X46.06793 Y-20.29163 | |
| G01 X45.88469 Y-20.22130 | |
| G01 X45.72236 Y-20.14901 | |
| G01 X45.57707 Y-20.07497 | |
| G01 X45.58053 Y-20.05965 | |
| G01 X45.57707 Y-20.07497 | |
| G01 X40.71996 Y-20.07497 | |
| G01 X40.49461 Y-20.06303 | |
| G01 X40.20393 Y-20.01700 | |
| G01 X40.12763 Y-19.99866 | |
| G01 X39.84777 Y-19.90771 | |
| G01 X39.77526 Y-19.87768 | |
| G01 X39.51308 Y-19.74405 | |
| G01 X39.44617 Y-19.70303 | |
| G01 X39.20810 Y-19.53003 | |
| G01 X39.04033 Y-19.37908 | |
| G01 X38.96035 Y-19.29907 | |
| G01 X38.83683 Y-19.16275 | |
| G01 X38.77465 Y-19.08698 | |
| G01 X38.57053 Y-18.78142 | |
| G01 X38.52433 Y-18.69498 | |
| G01 X38.38374 Y-18.35544 | |
| G01 X38.35530 Y-18.26166 | |
| G01 X38.28362 Y-17.90123 | |
| G01 X38.27402 Y-17.80372 | |
| G01 X38.26500 Y-17.61998 | |
| G01 X38.26500 Y-15.24000 | |
| G01 X38.27402 Y-15.05623 | |
| G01 X38.28362 Y-14.95872 | |
| G01 X38.35530 Y-14.59829 | |
| G01 X38.38374 Y-14.50452 | |
| G01 X38.52433 Y-14.16497 | |
| G01 X38.57053 Y-14.07853 | |
| G01 X38.77465 Y-13.77297 | |
| G01 X38.83683 Y-13.69720 | |
| G01 X38.96035 Y-13.56088 | |
| G01 X39.04033 Y-13.48087 | |
| G01 X39.20213 Y-13.33500 | |
| G01 X38.32555 Y-13.33497 | |
| G01 X48.26000 Y-13.33500 | |
| G01 X48.25997 Y-13.93878 | |
| G01 X48.27966 Y-13.96276 | |
| G01 X48.33742 Y-14.07081 | |
| G01 X48.37298 Y-14.18806 | |
| G01 X48.38499 Y-14.30998 | |
| G01 X48.38499 Y-16.01000 | |
| G01 X48.37298 Y-16.13192 | |
| G01 X48.33742 Y-16.24917 | |
| G01 X48.27966 Y-16.35722 | |
| G01 X48.25997 Y-16.38120 | |
| G01 X48.24928 Y-16.37828 | |
| G01 X48.25997 Y-16.38120 | |
| G01 X48.25997 Y-17.10662 | |
| G01 X48.25235 Y-17.10781 | |
| G01 X48.25997 Y-17.10662 | |
| G01 X48.25997 Y-16.38120 | |
| G01 X48.20194 Y-16.45194 | |
| G01 X48.10722 Y-16.52966 | |
| G01 X47.99917 Y-16.58742 | |
| G01 X47.90813 Y-16.61503 | |
| G01 X48.06211 Y-16.78216 | |
| G01 X48.10328 Y-16.83301 | |
| G01 X48.13892 Y-16.88788 | |
| G01 X48.25746 Y-17.10004 | |
| G01 X48.33582 Y-17.33012 | |
| G01 X48.35276 Y-17.39331 | |
| G01 X48.38156 Y-17.63466 | |
| G01 X48.38499 Y-17.69999 | |
| G01 X48.38156 Y-17.76532 | |
| G01 X48.35276 Y-18.00667 | |
| G01 X48.28090 Y-18.23885 | |
| G01 X48.25746 Y-18.29991 | |
| G01 X48.13892 Y-18.51210 | |
| G01 X48.10328 Y-18.56697 | |
| G01 X47.94321 Y-18.74987 | |
| G01 X47.89696 Y-18.79613 | |
| G01 X47.84611 Y-18.83730 | |
| G01 X47.64748 Y-18.97738 | |
| G01 X47.58921 Y-19.00707 | |
| G01 X47.36579 Y-19.10281 | |
| G01 X47.12879 Y-19.15668 | |
| G01 X47.06417 Y-19.16692 | |
| G01 X46.82114 Y-19.17032 | |
| G01 X46.75581 Y-19.16692 | |
| G01 X46.69119 Y-19.15668 | |
| G01 X46.51738 Y-19.11972 | |
| G01 X46.45419 Y-19.10281 | |
| G01 X46.39313 Y-19.07936 | |
| G01 X46.17250 Y-18.97738 | |
| G01 X46.11761 Y-18.94175 | |
| G01 X45.95866 Y-18.82498 | |
| G01 X40.71996 Y-18.82498 | |
| G01 X40.59268 Y-18.81690 | |
| G01 X40.49580 Y-18.80154 | |
| G01 X40.41950 Y-18.78322 | |
| G01 X40.32621 Y-18.75290 | |
| G01 X40.25372 Y-18.72287 | |
| G01 X40.16632 Y-18.67832 | |
| G01 X40.09941 Y-18.63730 | |
| G01 X40.02006 Y-18.57964 | |
| G01 X39.92435 Y-18.49534 | |
| G01 X39.80320 Y-18.36989 | |
| G01 X39.74104 Y-18.29412 | |
| G01 X39.67300 Y-18.19227 | |
| G01 X39.62679 Y-18.10583 | |
| G01 X39.57993 Y-17.99267 | |
| G01 X39.55148 Y-17.89890 | |
| G01 X39.52761 Y-17.77873 | |
| G01 X39.51498 Y-17.61998 | |
| G01 X39.51498 Y-15.24000 | |
| G01 X39.52761 Y-15.08122 | |
| G01 X39.55148 Y-14.96106 | |
| G01 X39.57993 Y-14.86728 | |
| G01 X39.62679 Y-14.75412 | |
| G01 X39.67300 Y-14.66769 | |
| G01 X39.74104 Y-14.56583 | |
| G01 X39.84437 Y-14.44462 | |
| G01 X39.92435 Y-14.36461 | |
| G01 X40.02006 Y-14.28031 | |
| G01 X40.09941 Y-14.22265 | |
| G01 X40.16632 Y-14.18163 | |
| G01 X40.25372 Y-14.13708 | |
| G01 X40.32621 Y-14.10706 | |
| G01 X40.41950 Y-14.07673 | |
| G01 X40.49580 Y-14.05842 | |
| G01 X40.59268 Y-14.04305 | |
| G01 X40.71996 Y-14.03497 | |
| G01 X45.50171 Y-14.03497 | |
| G01 X45.54032 Y-13.96276 | |
| G01 X45.61804 Y-13.86804 | |
| G01 X45.71276 Y-13.79032 | |
| G01 X45.82081 Y-13.73256 | |
| G01 X45.93806 Y-13.69700 | |
| G01 X46.05998 Y-13.68499 | |
| G01 X47.76000 Y-13.68499 | |
| G01 X47.88192 Y-13.69700 | |
| G01 X47.99917 Y-13.73256 | |
| G01 X48.10722 Y-13.79032 | |
| G01 X48.20194 Y-13.86804 | |
| G01 X48.25997 Y-13.93878 | |
| G01 X48.24928 Y-13.94170 | |
| G01 X48.25997 Y-13.93878 | |
| G01 X48.26000 Y-13.33500 | |
| G01 X45.28711 Y-13.33500 | |
| ( Mill infeed pass 2/2 ) | |
| G01 Z-0.06000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X36.83000 Y-20.32000 | |
| G01 X36.83000 Y-13.33500 | |
| G01 X38.32553 Y-13.33500 | |
| G01 X38.29147 Y-13.37653 | |
| G01 X38.01930 Y-13.78397 | |
| G01 X37.97310 Y-13.87041 | |
| G01 X37.78565 Y-14.32311 | |
| G01 X37.75720 Y-14.41689 | |
| G01 X37.66162 Y-14.89746 | |
| G01 X37.65202 Y-14.99499 | |
| G01 X37.63998 Y-15.24000 | |
| G01 X37.63998 Y-17.61998 | |
| G01 X37.65202 Y-17.86496 | |
| G01 X37.66162 Y-17.96250 | |
| G01 X37.75720 Y-18.44307 | |
| G01 X37.78565 Y-18.53684 | |
| G01 X37.97310 Y-18.98955 | |
| G01 X38.01930 Y-19.07598 | |
| G01 X38.29147 Y-19.48343 | |
| G01 X38.35362 Y-19.55917 | |
| G01 X38.51834 Y-19.74096 | |
| G01 X38.59832 Y-19.82097 | |
| G01 X38.80213 Y-20.00524 | |
| G01 X39.11956 Y-20.23590 | |
| G01 X39.18646 Y-20.27692 | |
| G01 X39.27097 Y-20.31997 | |
| G01 X48.26000 Y-20.32000 | |
| G01 X48.25997 Y-18.29336 | |
| G01 X48.25997 Y-20.06628 | |
| G01 X48.09762 Y-20.14901 | |
| G01 X47.93529 Y-20.22130 | |
| G01 X47.75205 Y-20.29163 | |
| G01 X47.64618 Y-20.31997 | |
| G01 X46.17380 Y-20.31997 | |
| G01 X46.06793 Y-20.29163 | |
| G01 X45.88469 Y-20.22130 | |
| G01 X45.72236 Y-20.14901 | |
| G01 X45.57707 Y-20.07497 | |
| G01 X45.58053 Y-20.05965 | |
| G01 X45.57707 Y-20.07497 | |
| G01 X40.71996 Y-20.07497 | |
| G01 X40.49461 Y-20.06303 | |
| G01 X40.20393 Y-20.01700 | |
| G01 X40.12763 Y-19.99866 | |
| G01 X39.84777 Y-19.90771 | |
| G01 X39.77526 Y-19.87768 | |
| G01 X39.51308 Y-19.74405 | |
| G01 X39.44617 Y-19.70303 | |
| G01 X39.20810 Y-19.53003 | |
| G01 X39.04033 Y-19.37908 | |
| G01 X38.96035 Y-19.29907 | |
| G01 X38.83683 Y-19.16275 | |
| G01 X38.77465 Y-19.08698 | |
| G01 X38.57053 Y-18.78142 | |
| G01 X38.52433 Y-18.69498 | |
| G01 X38.38374 Y-18.35544 | |
| G01 X38.35530 Y-18.26166 | |
| G01 X38.28362 Y-17.90123 | |
| G01 X38.27402 Y-17.80372 | |
| G01 X38.26500 Y-17.61998 | |
| G01 X38.26500 Y-15.24000 | |
| G01 X38.27402 Y-15.05623 | |
| G01 X38.28362 Y-14.95872 | |
| G01 X38.35530 Y-14.59829 | |
| G01 X38.38374 Y-14.50452 | |
| G01 X38.52433 Y-14.16497 | |
| G01 X38.57053 Y-14.07853 | |
| G01 X38.77465 Y-13.77297 | |
| G01 X38.83683 Y-13.69720 | |
| G01 X38.96035 Y-13.56088 | |
| G01 X39.04033 Y-13.48087 | |
| G01 X39.20213 Y-13.33500 | |
| G01 X38.32555 Y-13.33497 | |
| G01 X48.26000 Y-13.33500 | |
| G01 X48.25997 Y-13.93878 | |
| G01 X48.27966 Y-13.96276 | |
| G01 X48.33742 Y-14.07081 | |
| G01 X48.37298 Y-14.18806 | |
| G01 X48.38499 Y-14.30998 | |
| G01 X48.38499 Y-16.01000 | |
| G01 X48.37298 Y-16.13192 | |
| G01 X48.33742 Y-16.24917 | |
| G01 X48.27966 Y-16.35722 | |
| G01 X48.25997 Y-16.38120 | |
| G01 X48.24928 Y-16.37828 | |
| G01 X48.25997 Y-16.38120 | |
| G01 X48.25997 Y-17.10662 | |
| G01 X48.25235 Y-17.10781 | |
| G01 X48.25997 Y-17.10662 | |
| G01 X48.25997 Y-16.38120 | |
| G01 X48.20194 Y-16.45194 | |
| G01 X48.10722 Y-16.52966 | |
| G01 X47.99917 Y-16.58742 | |
| G01 X47.90813 Y-16.61503 | |
| G01 X48.06211 Y-16.78216 | |
| G01 X48.10328 Y-16.83301 | |
| G01 X48.13892 Y-16.88788 | |
| G01 X48.25746 Y-17.10004 | |
| G01 X48.33582 Y-17.33012 | |
| G01 X48.35276 Y-17.39331 | |
| G01 X48.38156 Y-17.63466 | |
| G01 X48.38499 Y-17.69999 | |
| G01 X48.38156 Y-17.76532 | |
| G01 X48.35276 Y-18.00667 | |
| G01 X48.28090 Y-18.23885 | |
| G01 X48.25746 Y-18.29991 | |
| G01 X48.13892 Y-18.51210 | |
| G01 X48.10328 Y-18.56697 | |
| G01 X47.94321 Y-18.74987 | |
| G01 X47.89696 Y-18.79613 | |
| G01 X47.84611 Y-18.83730 | |
| G01 X47.64748 Y-18.97738 | |
| G01 X47.58921 Y-19.00707 | |
| G01 X47.36579 Y-19.10281 | |
| G01 X47.12879 Y-19.15668 | |
| G01 X47.06417 Y-19.16692 | |
| G01 X46.82114 Y-19.17032 | |
| G01 X46.75581 Y-19.16692 | |
| G01 X46.69119 Y-19.15668 | |
| G01 X46.51738 Y-19.11972 | |
| G01 X46.45419 Y-19.10281 | |
| G01 X46.39313 Y-19.07936 | |
| G01 X46.17250 Y-18.97738 | |
| G01 X46.11761 Y-18.94175 | |
| G01 X45.95866 Y-18.82498 | |
| G01 X40.71996 Y-18.82498 | |
| G01 X40.59268 Y-18.81690 | |
| G01 X40.49580 Y-18.80154 | |
| G01 X40.41950 Y-18.78322 | |
| G01 X40.32621 Y-18.75290 | |
| G01 X40.25372 Y-18.72287 | |
| G01 X40.16632 Y-18.67832 | |
| G01 X40.09941 Y-18.63730 | |
| G01 X40.02006 Y-18.57964 | |
| G01 X39.92435 Y-18.49534 | |
| G01 X39.80320 Y-18.36989 | |
| G01 X39.74104 Y-18.29412 | |
| G01 X39.67300 Y-18.19227 | |
| G01 X39.62679 Y-18.10583 | |
| G01 X39.57993 Y-17.99267 | |
| G01 X39.55148 Y-17.89890 | |
| G01 X39.52761 Y-17.77873 | |
| G01 X39.51498 Y-17.61998 | |
| G01 X39.51498 Y-15.24000 | |
| G01 X39.52761 Y-15.08122 | |
| G01 X39.55148 Y-14.96106 | |
| G01 X39.57993 Y-14.86728 | |
| G01 X39.62679 Y-14.75412 | |
| G01 X39.67300 Y-14.66769 | |
| G01 X39.74104 Y-14.56583 | |
| G01 X39.84437 Y-14.44462 | |
| G01 X39.92435 Y-14.36461 | |
| G01 X40.02006 Y-14.28031 | |
| G01 X40.09941 Y-14.22265 | |
| G01 X40.16632 Y-14.18163 | |
| G01 X40.25372 Y-14.13708 | |
| G01 X40.32621 Y-14.10706 | |
| G01 X40.41950 Y-14.07673 | |
| G01 X40.49580 Y-14.05842 | |
| G01 X40.59268 Y-14.04305 | |
| G01 X40.71996 Y-14.03497 | |
| G01 X45.50171 Y-14.03497 | |
| G01 X45.54032 Y-13.96276 | |
| G01 X45.61804 Y-13.86804 | |
| G01 X45.71276 Y-13.79032 | |
| G01 X45.82081 Y-13.73256 | |
| G01 X45.93806 Y-13.69700 | |
| G01 X46.05998 Y-13.68499 | |
| G01 X47.76000 Y-13.68499 | |
| G01 X47.88192 Y-13.69700 | |
| G01 X47.99917 Y-13.73256 | |
| G01 X48.10722 Y-13.79032 | |
| G01 X48.20194 Y-13.86804 | |
| G01 X48.25997 Y-13.93878 | |
| G01 X48.24928 Y-13.94170 | |
| G01 X48.25997 Y-13.93878 | |
| G01 X48.26000 Y-13.33500 | |
| G01 X45.28711 Y-13.33500 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z1.00000 ( retract ) | |
| G00 X41.76499 Y-16.57497 ( rapid move to begin. ) | |
| G01 F40.00000 | |
| ( Mill infeed pass 1/2 ) | |
| G01 Z-0.03000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X41.76499 Y-16.57497 | |
| G01 X41.76499 Y-16.28498 | |
| G01 X45.50171 Y-16.28498 | |
| G01 X45.54032 Y-16.35722 | |
| G01 X45.61804 Y-16.45194 | |
| G01 X45.71276 Y-16.52966 | |
| G01 X45.79755 Y-16.57497 | |
| G01 X41.76499 Y-16.57497 | |
| ( Mill infeed pass 2/2 ) | |
| G01 Z-0.06000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X41.76499 Y-16.57497 | |
| G01 X41.76499 Y-16.28498 | |
| G01 X45.50171 Y-16.28498 | |
| G01 X45.54032 Y-16.35722 | |
| G01 X45.61804 Y-16.45194 | |
| G01 X45.71276 Y-16.52966 | |
| G01 X45.79755 Y-16.57497 | |
| G01 X41.76499 Y-16.57497 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z1.00000 ( retract ) | |
| G00 X39.51498 Y-17.61998 ( rapid move to begin. ) | |
| G01 F40.00000 | |
| ( Mill infeed pass 1/2 ) | |
| G01 Z-0.03000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X39.51498 Y-17.61998 | |
| G01 X37.01499 Y-17.61998 | |
| G01 X36.82997 Y-19.48048 | |
| G01 X36.87064 Y-19.57868 | |
| G01 X36.91684 Y-19.66511 | |
| G01 X37.32510 Y-20.27629 | |
| G01 X37.36096 Y-20.31997 | |
| G01 X38.21808 Y-20.32000 | |
| G01 X38.07633 Y-20.18281 | |
| G01 X37.87043 Y-19.95561 | |
| G01 X37.80828 Y-19.87984 | |
| G01 X37.46807 Y-19.37055 | |
| G01 X37.42187 Y-19.28411 | |
| G01 X37.18753 Y-18.71823 | |
| G01 X37.15911 Y-18.62445 | |
| G01 X37.03963 Y-18.02374 | |
| G01 X37.03003 Y-17.92620 | |
| G01 X37.01499 Y-17.61998 | |
| G01 X37.01499 Y-15.24000 | |
| G01 X37.03003 Y-14.93375 | |
| G01 X37.03963 Y-14.83622 | |
| G01 X37.15911 Y-14.23551 | |
| G01 X37.18753 Y-14.14173 | |
| G01 X37.42187 Y-13.57584 | |
| G01 X37.46807 Y-13.48941 | |
| G01 X37.57122 Y-13.33497 | |
| G01 X45.28708 Y-13.33500 | |
| G01 X45.19574 Y-13.40998 | |
| G01 X45.20882 Y-13.44651 | |
| G01 X45.19574 Y-13.40998 | |
| G01 X40.71996 Y-13.40998 | |
| G01 X40.54366 Y-13.41999 | |
| G01 X40.34988 Y-13.45070 | |
| G01 X40.27358 Y-13.46901 | |
| G01 X40.08699 Y-13.52964 | |
| G01 X40.01450 Y-13.55969 | |
| G01 X39.83970 Y-13.64877 | |
| G01 X39.77279 Y-13.68979 | |
| G01 X39.61409 Y-13.80510 | |
| G01 X39.48234 Y-13.92273 | |
| G01 X39.40236 Y-14.00274 | |
| G01 X39.32001 Y-14.09362 | |
| G01 X39.25783 Y-14.16939 | |
| G01 X39.12177 Y-14.37312 | |
| G01 X39.07556 Y-14.45953 | |
| G01 X38.98184 Y-14.68590 | |
| G01 X38.95339 Y-14.77968 | |
| G01 X38.90561 Y-15.01996 | |
| G01 X38.89601 Y-15.11750 | |
| G01 X38.88999 Y-15.24000 | |
| G01 X38.88999 Y-17.61998 | |
| G01 X38.89601 Y-17.74246 | |
| G01 X38.90561 Y-17.83999 | |
| G01 X38.95339 Y-18.08028 | |
| G01 X38.98184 Y-18.17406 | |
| G01 X39.07556 Y-18.40042 | |
| G01 X39.12177 Y-18.48683 | |
| G01 X39.25783 Y-18.69056 | |
| G01 X39.32001 Y-18.76633 | |
| G01 X39.40236 Y-18.85721 | |
| G01 X39.48234 Y-18.93722 | |
| G01 X39.61409 Y-19.05485 | |
| G01 X39.77279 Y-19.17017 | |
| G01 X39.83970 Y-19.21119 | |
| G01 X40.01450 Y-19.30027 | |
| G01 X40.08699 Y-19.33031 | |
| G01 X40.27358 Y-19.39094 | |
| G01 X40.34988 Y-19.40926 | |
| G01 X40.54366 Y-19.43997 | |
| G01 X40.71996 Y-19.44997 | |
| G01 X45.75426 Y-19.44997 | |
| G01 X45.75990 Y-19.42892 | |
| G01 X45.75426 Y-19.44997 | |
| G01 X45.85998 Y-19.51863 | |
| G01 X45.97657 Y-19.57804 | |
| G01 X46.13890 Y-19.65033 | |
| G01 X46.26105 Y-19.69722 | |
| G01 X46.38744 Y-19.73108 | |
| G01 X46.56125 Y-19.76801 | |
| G01 X46.69048 Y-19.78848 | |
| G01 X46.82114 Y-19.79534 | |
| G01 X46.99884 Y-19.79534 | |
| G01 X47.12950 Y-19.78848 | |
| G01 X47.25873 Y-19.76801 | |
| G01 X47.43254 Y-19.73108 | |
| G01 X47.55893 Y-19.69722 | |
| G01 X47.68108 Y-19.65033 | |
| G01 X47.84341 Y-19.57804 | |
| G01 X47.96000 Y-19.51863 | |
| G01 X48.06973 Y-19.44738 | |
| G01 X48.26000 Y-19.30527 | |
| G01 X48.25997 Y-18.29336 | |
| G01 X48.25235 Y-18.29217 | |
| G01 X48.25997 Y-18.29336 | |
| G01 X48.26000 Y-20.32000 | |
| G01 X36.83000 Y-20.32000 | |
| G01 X36.83000 Y-13.37948 | |
| G01 X36.84841 Y-13.33500 | |
| ( Mill infeed pass 2/2 ) | |
| G01 Z-0.06000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X39.51498 Y-17.61998 | |
| G01 X37.01499 Y-17.61998 | |
| G01 X36.82997 Y-19.48048 | |
| G01 X36.87064 Y-19.57868 | |
| G01 X36.91684 Y-19.66511 | |
| G01 X37.32510 Y-20.27629 | |
| G01 X37.36096 Y-20.31997 | |
| G01 X38.21808 Y-20.32000 | |
| G01 X38.07633 Y-20.18281 | |
| G01 X37.87043 Y-19.95561 | |
| G01 X37.80828 Y-19.87984 | |
| G01 X37.46807 Y-19.37055 | |
| G01 X37.42187 Y-19.28411 | |
| G01 X37.18753 Y-18.71823 | |
| G01 X37.15911 Y-18.62445 | |
| G01 X37.03963 Y-18.02374 | |
| G01 X37.03003 Y-17.92620 | |
| G01 X37.01499 Y-17.61998 | |
| G01 X37.01499 Y-15.24000 | |
| G01 X37.03003 Y-14.93375 | |
| G01 X37.03963 Y-14.83622 | |
| G01 X37.15911 Y-14.23551 | |
| G01 X37.18753 Y-14.14173 | |
| G01 X37.42187 Y-13.57584 | |
| G01 X37.46807 Y-13.48941 | |
| G01 X37.57122 Y-13.33497 | |
| G01 X45.28708 Y-13.33500 | |
| G01 X45.19574 Y-13.40998 | |
| G01 X45.20882 Y-13.44651 | |
| G01 X45.19574 Y-13.40998 | |
| G01 X40.71996 Y-13.40998 | |
| G01 X40.54366 Y-13.41999 | |
| G01 X40.34988 Y-13.45070 | |
| G01 X40.27358 Y-13.46901 | |
| G01 X40.08699 Y-13.52964 | |
| G01 X40.01450 Y-13.55969 | |
| G01 X39.83970 Y-13.64877 | |
| G01 X39.77279 Y-13.68979 | |
| G01 X39.61409 Y-13.80510 | |
| G01 X39.48234 Y-13.92273 | |
| G01 X39.40236 Y-14.00274 | |
| G01 X39.32001 Y-14.09362 | |
| G01 X39.25783 Y-14.16939 | |
| G01 X39.12177 Y-14.37312 | |
| G01 X39.07556 Y-14.45953 | |
| G01 X38.98184 Y-14.68590 | |
| G01 X38.95339 Y-14.77968 | |
| G01 X38.90561 Y-15.01996 | |
| G01 X38.89601 Y-15.11750 | |
| G01 X38.88999 Y-15.24000 | |
| G01 X38.88999 Y-17.61998 | |
| G01 X38.89601 Y-17.74246 | |
| G01 X38.90561 Y-17.83999 | |
| G01 X38.95339 Y-18.08028 | |
| G01 X38.98184 Y-18.17406 | |
| G01 X39.07556 Y-18.40042 | |
| G01 X39.12177 Y-18.48683 | |
| G01 X39.25783 Y-18.69056 | |
| G01 X39.32001 Y-18.76633 | |
| G01 X39.40236 Y-18.85721 | |
| G01 X39.48234 Y-18.93722 | |
| G01 X39.61409 Y-19.05485 | |
| G01 X39.77279 Y-19.17017 | |
| G01 X39.83970 Y-19.21119 | |
| G01 X40.01450 Y-19.30027 | |
| G01 X40.08699 Y-19.33031 | |
| G01 X40.27358 Y-19.39094 | |
| G01 X40.34988 Y-19.40926 | |
| G01 X40.54366 Y-19.43997 | |
| G01 X40.71996 Y-19.44997 | |
| G01 X45.75426 Y-19.44997 | |
| G01 X45.75990 Y-19.42892 | |
| G01 X45.75426 Y-19.44997 | |
| G01 X45.85998 Y-19.51863 | |
| G01 X45.97657 Y-19.57804 | |
| G01 X46.13890 Y-19.65033 | |
| G01 X46.26105 Y-19.69722 | |
| G01 X46.38744 Y-19.73108 | |
| G01 X46.56125 Y-19.76801 | |
| G01 X46.69048 Y-19.78848 | |
| G01 X46.82114 Y-19.79534 | |
| G01 X46.99884 Y-19.79534 | |
| G01 X47.12950 Y-19.78848 | |
| G01 X47.25873 Y-19.76801 | |
| G01 X47.43254 Y-19.73108 | |
| G01 X47.55893 Y-19.69722 | |
| G01 X47.68108 Y-19.65033 | |
| G01 X47.84341 Y-19.57804 | |
| G01 X47.96000 Y-19.51863 | |
| G01 X48.06973 Y-19.44738 | |
| G01 X48.26000 Y-19.30527 | |
| G01 X48.25997 Y-18.29336 | |
| G01 X48.25235 Y-18.29217 | |
| G01 X48.25997 Y-18.29336 | |
| G01 X48.26000 Y-20.32000 | |
| G01 X36.83000 Y-20.32000 | |
| G01 X36.83000 Y-13.37948 | |
| G01 X36.84841 Y-13.33500 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z15.000000 ( retract ) | |
| M5 ( Spindle off. ) | |
| G04 P1.000000 | |
| G00 Z15.00000 (Retract to tool change height) | |
| T1 | |
| M5 (Spindle stop.) | |
| G04 P1.00000 (Wait for spindle to stop) | |
| (MSG, Change tool bit to mill diameter 0.25000mm) | |
| M6 (Tool change.) | |
| M0 (Temporary machine stop.) | |
| M3 ( Spindle on clockwise. ) | |
| G04 P1.00000 (Wait for spindle to get up to speed) | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z1.00000 ( retract ) | |
| G00 X41.35338 Y-16.98658 ( rapid move to begin. ) | |
| G01 F40.00000 | |
| ( Mill infeed pass 1/2 ) | |
| G01 Z-0.03000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X41.35338 Y-16.98658 | |
| G01 X41.38999 Y-16.94998 | |
| G01 X41.38999 Y-16.91747 | |
| G01 X41.38999 Y-16.94998 | |
| G01 X41.42252 Y-16.94998 | |
| G01 X41.66763 Y-17.07497 | |
| G01 X41.26499 Y-17.07497 | |
| G01 X41.26499 Y-15.78498 | |
| G01 X41.66738 Y-15.78498 | |
| G01 X41.42247 Y-15.90998 | |
| G01 X41.38999 Y-15.90998 | |
| G01 X41.38999 Y-15.94246 | |
| G01 X41.38999 Y-15.90998 | |
| G01 X41.35338 Y-15.87337 | |
| ( Mill infeed pass 2/2 ) | |
| G01 Z-0.06000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X41.35338 Y-16.98658 | |
| G01 X41.38999 Y-16.94998 | |
| G01 X41.38999 Y-16.91747 | |
| G01 X41.38999 Y-16.94998 | |
| G01 X41.42252 Y-16.94998 | |
| G01 X41.66763 Y-17.07497 | |
| G01 X41.26499 Y-17.07497 | |
| G01 X41.26499 Y-15.78498 | |
| G01 X41.66738 Y-15.78498 | |
| G01 X41.42247 Y-15.90998 | |
| G01 X41.38999 Y-15.90998 | |
| G01 X41.38999 Y-15.94246 | |
| G01 X41.38999 Y-15.90998 | |
| G01 X41.35338 Y-15.87337 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z1.00000 ( retract ) | |
| G00 X45.59816 Y-14.53497 ( rapid move to begin. ) | |
| G01 F40.00000 | |
| ( Mill infeed pass 1/2 ) | |
| G01 Z-0.03000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X45.59816 Y-14.53497 | |
| G01 X45.93499 Y-14.53497 | |
| G01 X45.93615 Y-14.29817 | |
| G01 X45.82612 Y-14.42664 | |
| G01 X45.84408 Y-14.44518 | |
| ( Mill infeed pass 2/2 ) | |
| G01 Z-0.06000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X45.59816 Y-14.53497 | |
| G01 X45.93499 Y-14.53497 | |
| G01 X45.93615 Y-14.29817 | |
| G01 X45.82612 Y-14.42664 | |
| G01 X45.84408 Y-14.44518 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z1.00000 ( retract ) | |
| G00 X45.84408 Y-15.87477 ( rapid move to begin. ) | |
| G01 F40.00000 | |
| ( Mill infeed pass 1/2 ) | |
| G01 Z-0.03000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X45.84408 Y-15.87477 | |
| G01 X45.82615 Y-15.89329 | |
| G01 X45.59826 Y-15.78498 | |
| G01 X45.93499 Y-15.78498 | |
| G01 X45.93615 Y-16.02176 | |
| G01 X45.89523 Y-17.07497 | |
| G01 X46.16701 Y-17.07497 | |
| G01 X46.25759 Y-16.97543 | |
| G01 X46.42249 Y-16.85562 | |
| G01 X46.60870 Y-16.77271 | |
| G01 X46.80809 Y-16.73032 | |
| G01 X47.01189 Y-16.73032 | |
| G01 X47.21128 Y-16.77271 | |
| G01 X47.39749 Y-16.85562 | |
| G01 X47.52391 Y-16.94663 | |
| G01 X47.54519 Y-16.25999 | |
| G01 X46.19653 Y-16.25999 | |
| G01 X46.23039 Y-16.83982 | |
| G01 X46.35998 Y-16.74736 | |
| G01 X46.54563 Y-16.66321 | |
| G01 X46.59533 Y-16.64706 | |
| G01 X46.79500 Y-16.60601 | |
| G01 X46.99884 Y-16.60464 | |
| G01 X47.05081 Y-16.61010 | |
| G01 X47.24992 Y-16.65381 | |
| G01 X47.41060 Y-16.72387 | |
| G01 X47.45546 Y-16.38498 | |
| G01 X46.26831 Y-16.38498 | |
| G01 X46.27936 Y-16.46961 | |
| G01 X46.30143 Y-16.50197 | |
| G01 X46.55454 Y-16.42245 | |
| G01 X46.30143 Y-16.50197 | |
| G01 X46.27936 Y-16.46961 | |
| G01 X46.30125 Y-16.63718 | |
| G01 X46.53145 Y-16.53494 | |
| G01 X46.74316 Y-16.48785 | |
| G01 X46.82114 Y-16.47965 | |
| G01 X46.99884 Y-16.47965 | |
| G01 X47.07679 Y-16.48785 | |
| G01 X47.28853 Y-16.53494 | |
| G01 X47.40171 Y-16.58308 | |
| G01 X47.42076 Y-16.47238 | |
| G01 X47.25391 Y-16.42146 | |
| G01 X47.42076 Y-16.47238 | |
| G01 X47.40171 Y-16.58308 | |
| G01 X47.28853 Y-16.53494 | |
| G01 X47.07679 Y-16.48785 | |
| G01 X46.99884 Y-16.47965 | |
| G01 X46.82114 Y-16.47965 | |
| G01 X46.74316 Y-16.48785 | |
| G01 X46.53145 Y-16.53494 | |
| G01 X46.30125 Y-16.63718 | |
| G01 X46.27936 Y-16.46961 | |
| G01 X46.05071 Y-16.13408 | |
| G01 X47.74141 Y-16.13499 | |
| ( Mill infeed pass 2/2 ) | |
| G01 Z-0.06000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X45.84408 Y-15.87477 | |
| G01 X45.82615 Y-15.89329 | |
| G01 X45.59826 Y-15.78498 | |
| G01 X45.93499 Y-15.78498 | |
| G01 X45.93615 Y-16.02176 | |
| G01 X45.89523 Y-17.07497 | |
| G01 X46.16701 Y-17.07497 | |
| G01 X46.25759 Y-16.97543 | |
| G01 X46.42249 Y-16.85562 | |
| G01 X46.60870 Y-16.77271 | |
| G01 X46.80809 Y-16.73032 | |
| G01 X47.01189 Y-16.73032 | |
| G01 X47.21128 Y-16.77271 | |
| G01 X47.39749 Y-16.85562 | |
| G01 X47.52391 Y-16.94663 | |
| G01 X47.54519 Y-16.25999 | |
| G01 X46.19653 Y-16.25999 | |
| G01 X46.23039 Y-16.83982 | |
| G01 X46.35998 Y-16.74736 | |
| G01 X46.54563 Y-16.66321 | |
| G01 X46.59533 Y-16.64706 | |
| G01 X46.79500 Y-16.60601 | |
| G01 X46.99884 Y-16.60464 | |
| G01 X47.05081 Y-16.61010 | |
| G01 X47.24992 Y-16.65381 | |
| G01 X47.41060 Y-16.72387 | |
| G01 X47.45546 Y-16.38498 | |
| G01 X46.26831 Y-16.38498 | |
| G01 X46.27936 Y-16.46961 | |
| G01 X46.30143 Y-16.50197 | |
| G01 X46.55454 Y-16.42245 | |
| G01 X46.30143 Y-16.50197 | |
| G01 X46.27936 Y-16.46961 | |
| G01 X46.30125 Y-16.63718 | |
| G01 X46.53145 Y-16.53494 | |
| G01 X46.74316 Y-16.48785 | |
| G01 X46.82114 Y-16.47965 | |
| G01 X46.99884 Y-16.47965 | |
| G01 X47.07679 Y-16.48785 | |
| G01 X47.28853 Y-16.53494 | |
| G01 X47.40171 Y-16.58308 | |
| G01 X47.42076 Y-16.47238 | |
| G01 X47.25391 Y-16.42146 | |
| G01 X47.42076 Y-16.47238 | |
| G01 X47.40171 Y-16.58308 | |
| G01 X47.28853 Y-16.53494 | |
| G01 X47.07679 Y-16.48785 | |
| G01 X46.99884 Y-16.47965 | |
| G01 X46.82114 Y-16.47965 | |
| G01 X46.74316 Y-16.48785 | |
| G01 X46.53145 Y-16.53494 | |
| G01 X46.30125 Y-16.63718 | |
| G01 X46.27936 Y-16.46961 | |
| G01 X46.05071 Y-16.13408 | |
| G01 X47.74141 Y-16.13499 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z1.00000 ( retract ) | |
| G00 X46.05411 Y-18.32498 ( rapid move to begin. ) | |
| G01 F40.00000 | |
| ( Mill infeed pass 1/2 ) | |
| G01 Z-0.03000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X46.05411 Y-18.32498 | |
| G01 X46.16701 Y-18.32498 | |
| G01 X46.23087 Y-18.39592 | |
| ( Mill infeed pass 2/2 ) | |
| G01 Z-0.06000 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G01 F80.00000 | |
| G01 X46.05411 Y-18.32498 | |
| G01 X46.16701 Y-18.32498 | |
| G01 X46.23087 Y-18.39592 | |
| G04 P0 ( dwell for no time -- G64 should not smooth over this point ) | |
| G00 Z15.000000 ( retract ) | |
| M5 ( Spindle off. ) | |
| G04 P1.000000 | |
| M9 ( Coolant off. ) | |
| M2 ( Program end. ) | |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| front=../test-F_Cu.gbr | |
| outline=../test-Edge_Cuts.gbr | |
| vectorial=true | |
| metric=true | |
| metricoutput=true | |
| zsafe=1 | |
| zchange=15 | |
| zcut=-1.8 | |
| cutter-diameter=1.2 | |
| cut-feed=90 | |
| cut-speed=30000 | |
| cut-infeed=0.25 | |
| zwork=-0.06 | |
| mill-feed=80 | |
| mill-infeed=0.03 | |
| mill-speed=30000 | |
| mill-diameters=1.25mm,0.25mm | |
| #offset=0.2 | |
| extra-passes=20 | |
| #zcut=-1.8 | |
| #cutter-diameter=1.2 | |
| #cut-feed=90 | |
| #cut-speed=30000 | |
| #cut-infeed=0.25 | |
| bridges=2 | |
| zbridges=-1.2 | |
| bridgesnum=4 | |
| nog81=true | |
| zdrill=-0.06 | |
| drill-feed=30 | |
| drill-speed=30000 | |
| drills-available=0.1 |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5-0-10_14)* | |
| G04 #@! TF.CreationDate,2020-09-25T12:09:21+02:00* | |
| G04 #@! TF.ProjectId,test,74657374-2e6b-4696-9361-645f70636258,rev?* | |
| G04 #@! TF.SameCoordinates,Original* | |
| G04 #@! TF.FileFunction,Profile,NP* | |
| %FSLAX46Y46*% | |
| G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* | |
| G04 Created by KiCad (PCBNEW (5.1.5-0-10_14)) date 2020-09-25 12:09:21* | |
| %MOMM*% | |
| %LPD*% | |
| G04 APERTURE LIST* | |
| %ADD10C,0.050000*% | |
| G04 APERTURE END LIST* | |
| D10* | |
| X36830000Y-20320000D02* | |
| X48260000Y-20320000D01* | |
| X36830000Y-13335000D02* | |
| X36830000Y-20320000D01* | |
| X48260000Y-13335000D02* | |
| X36830000Y-13335000D01* | |
| X48260000Y-20320000D02* | |
| X48260000Y-13335000D01* | |
| M02* |
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,(5.1.5-0-10_14)* | |
| G04 #@! TF.CreationDate,2020-09-25T12:09:21+02:00* | |
| G04 #@! TF.ProjectId,test,74657374-2e6b-4696-9361-645f70636258,rev?* | |
| G04 #@! TF.SameCoordinates,Original* | |
| G04 #@! TF.FileFunction,Copper,L1,Top* | |
| G04 #@! TF.FilePolarity,Positive* | |
| %FSLAX46Y46*% | |
| G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* | |
| G04 Created by KiCad (PCBNEW (5.1.5-0-10_14)) date 2020-09-25 12:09:21* | |
| %MOMM*% | |
| %LPD*% | |
| G04 APERTURE LIST* | |
| %ADD10O,1.700000X1.700000*% | |
| %ADD11R,1.700000X1.700000*% | |
| %ADD12C,1.000000*% | |
| G04 APERTURE END LIST* | |
| D10* | |
| X46910001Y-17700001D03* | |
| D11* | |
| X46910001Y-15160001D03* | |
| D12* | |
| X46910001Y-17700001D02* | |
| X40719999Y-17700001D01* | |
| X40719999Y-17700001D02* | |
| X40640000Y-17620002D01* | |
| X40640000Y-17620002D02* | |
| X40640000Y-15240000D01* | |
| X40719999Y-15160001D02* | |
| X46910001Y-15160001D01* | |
| X40640000Y-15240000D02* | |
| X40719999Y-15160001D01* | |
| M02* |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment