| // | |
| // airtag-decryptor.swift | |
| // | |
| // Decrypt all beacons files from ~/Library/com.apple.icloud.searchpartyd - updated when FindMy is running | |
| // Results in /tmp/com.apple.icloud.searchpartyd - same file hierarchy | |
| // | |
| // Created by Matus on 28/01/2024. - https://gist.github.com/YeapGuy/f473de53c2a4e8978bc63217359ca1e4 | |
| // Modified by Airy | |
| // | |
| import Cocoa |
| # Gitignore settings for ESPHome | |
| # This is an example and may include too much for your use-case. | |
| # You can modify this file to suit your needs. | |
| /.esphome/ | |
| /secrets.yaml | |
| /wifi.yaml |
| substitutions: | |
| device_name: car | |
| charging_voltage_threshold: '13.0' | |
| low_voltage_threshold: '12.0' | |
| low_voltage_sleep_duration: 30min | |
| deep_sleep_duration: 3min # 5 * 60000 | |
| first_boot_run_duration: '300000' | |
| abrp_key: !secret abrp_key | |
| abrp_token: !secret abrp_token | |
| hotspot1_ssid: !secret hotspot1_ssid |
| substitutions: | |
| device_name: wican | |
| esp32: | |
| variant: ESP32C3 | |
| board: esp32-c3-devkitm-1 | |
| esphome: | |
| name: ${device_name} |
| # Be warned: This is just a first try and still very much work in progress - no guarantees given whatsoever! | |
| # | |
| # To install the ESPHome firmware on the WiCAN for the first time (before being able to use ESPHome OTA), I built the firmware | |
| # for download (in "modern" format) and then used the following command line on Linux: | |
| # esptool.py --before=default_reset --after=hard_reset --no-stub write_flash --flash_mode dio --flash_freq 80m --flash_size 4MB 0x0 /home/.../Downloads/m-wican-factory.bin | |
| # | |
| # Don't forget to short the pins to enable boot mode (https://github.com/meatpiHQ/wican-fw#obd). | |
| # | |
| # Using the graphical tool (https://github.com/meatpiHQ/wican-fw#2-usb-flash) will probably work just as well. Just populate | |
| # the first item in the list with 0x0 and /home/.../Downloads/m-wican-factory.bin and leave the rest empty. |
Windows 2012 R2 Essentials: http://download.microsoft.com/download/8/F/7/8F7024D2-AB2A-4BE2-8406-1E3AC49C5C1F/9600.16384.WINBLUE_RTM.130821-1623_X64FRE_SERVER_SOLUTION_EN-US-IRM_SSSO_X64FRE_EN-US_DV5.ISO
Windows 2016: https://software-download.microsoft.com/download/pr/Windows_Server_2016_Datacenter_EVAL_en-us_14393_refresh.ISO
Windows 2019 Essentials: https://software-download.microsoft.com/download/pr/17763.737.190906-2324.rs5_release_svc_refresh_SERVERESSENTIALS_OEM_x64FRE_en-us_1.iso
| #!/usr/bin/env bash | |
| # | |
| # Reads AirTag data from the FindMy.app cache and converts it to a daily GPX file | |
| # | |
| # Rsyncs the data to a web accessible folder that can be displayed with e.g. | |
| # https://gist.github.com/henrik242/84ad80dd2170385fe819df1d40224cc4 | |
| # | |
| # This should typically be run as a cron job | |
| # |
These instructions have moved to https://github.com/emporia-vue-local/esphome
scenario: you have a windows vm failing to boot with INACCESSIBLE_BOOT_DEVICE and changing the
disk type to ide or something else causes another bsod. how to you get it to boot up again without
a physical machine?
download the stable virtio drivers from here, in iso form: https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/stable-virtio/virtio-win.iso
add the iso to your qemu/virt manager config as a cd/dvd drive
windows should send you to the recovery mode screen, but if it doesn't you might have to run a windows install iso to get to it.
Install a working (and compiled) version of virt-viewer. You may view the homebrew package's upstream source on GitHub.
brew tap jeffreywildman/homebrew-virt-manager
brew install virt-viewerOnce that's installed should be able make a call remote-viewer with a pve-spice.vv file downloaded from proxmox web interface