elvisimprsntr · January 4, 2019 00:45 · elvisimprsntr · Apr 15, 2013 · BA-Baracus · May 21, 2013
diff --git a/siriproxy-raspberrypi.txt b/siriproxy-raspberrypi.txt
 # $Header: /root/RCS/siriproxy-raspberrypi.txt,v 1.9 2013/11/09 08:11:00 root Exp $
 # $Log: siriproxy-raspberrypi.txt,v $
 # Revision 1.9  2013/11/09 08:11:00  root
 # updated for latest RVM which installs dependencies and Ruby by default 
 #
 # Revision 1.8  2013/03/22 20:41:20  root
 # updated for Ruby 2.0.0 and SiriProxy 0.5.2
 #
 # Revision 1.7  2012/12/31 04:42:57  root
 # shorter URL for newark and typos
 #
 # Revision 1.6  2012/12/30 05:33:40  root
 # typo
 #
 # Revision 1.5  2012/12/30 04:29:45  root
 # removed ruby p286 in rvm commands
 #
 # Revision 1.4  2012/12/30 01:39:53  root
 # added resolv.conf edit steps
 #
 # Revision 1.3  2012/12/30 00:22:56  root
 # typo
 #
 # Revision 1.2  2012/12/30 00:11:17  root
 # typo
 #
 # Revision 1.1  2012/12/29 22:28:39  root
 # Initial revision
 #
 # DESCRIPTION: SiriProxy running on a Raspberry Pi computer.
 # AUTHOR: elvisimprsntr
 # CREDITS:  This file is derived from plamoni's instructions for getting SiriProxy running on a Ubuntu 11 VM: https://gist.github.com/1428474
 # PREREQUISITES: A Raspberry Pi computer or equivalent device, and a router running www.dd-wrt.com open source firmware. 
 # ASSUMPTIONS: This instruction assumes the reader already has some basic *NIX command line and editor experience and are remotely logging in to the RPi from a *NIX based computer.  It is not a BASH script, but the commands and configuration file syntax are formatted to allow one to cut and paste into a terminal window or editor.  
 # DISCLAIMER: This was written from notes and memory recall.     

 # Purchase a Raspberry Pi, optionally a pre-configured SDC, and what ever other accessories you need to provide power at: www.newark.com/Raspberry-PI

 # Follow the instructions for creating an bootable SDC and booting up for the first time at: http://www.raspberrypi.org/quick-start-guide
 # NOTE: Enable SSH server if you intend to run as a headless system.  

 # Since I am running SiriProxy on a dedicated RPi I am not concerned about installing and running everything as ROOT.  
 # Set the ROOT password from the user account
 sudo passwd
 # Log out and log back in as ROOT
 # Remove the original user account if you wish
 deluser 

 # Update the system
 apt-get update
 apt-get dist-upgrade
 apt-get autoremove

 # Install some basics:
 apt-get install samba samba-common-bin ssh vim rcs unzip -y

 # If you want to add or create SiriPorxy plugins that push custom pictures to Siri, then install APACHE
 # NOTE: The defaults are fine.  Your custom images need to reside in /var/www/
 apt-get install apache2 -y

 # If you use your router to reserve a static IP, add the following line to /etc/dhcp/dhclient.conf file.
 supersede domain-name-servers 8.8.8.8, 8.8.4.4;
 # Reboot the RPi
 reboot

 # If you want to define a static IP on the RPi, find out what address your router assigned to your RPi.  
 ifconfig
 # Edit the network settings to use a STATIC IP address. 
 # NOTE: To make it easy use the same settings your router assigned to your RPi. 
 vim /etc/network/interfaces
 # Comment out the DHCP entry.  Make the STATIC entry look something like this:
 # NOTE: Tweak the address for your STATIC IP address.  
 auto eth0
 iface eth0 inet static
 	address 192.168.69.97
 	netmask 255.255.255.0
 	broadcast 192.168.69.255
 	network 192.168.69.0
 	gateway 192.168.69.1
 	dns-nameservers 8.8.8.8 8.8.4.4
 # Reboot the RPi
 reboot

 # Enable SAMBA support. Tweak the Share Definition section in the /etc/samba/smb.conf file.   
 # TIP: If you enable RW access you will be able to create folders and write to the RPi from any client.  Also make sure to disable GUEST access.
 vim /etc/samba/smb.conf
 # Add ROOT as a remote user. 
 # TIP: Use the same password as the root login to eliminate the need to remember another password.
 smbpasswd –a root
 # Restart SAMBA daemon:
 sh /etc/init.d/samba stop
 sh /etc/init.d/samba start
 # You should now be able to access the RPi file system from any client.

 # In lieu of running DNSMASQ or RubyDNS on the RPi, I opted to use my router to perform a transparent DNS redirect.
 # On a router running www.dd-wrt.com open source firmware, configure a DNS redirect from Apple Siri servers to the STATIC IP address of the RPi.
 # NOTE: Tweak the address for your RPi STATIC IP address.  
 # Services -> Additional DNSMasq Options
 # iOS production Siri server
 address=/guzzoni.apple.com/192.168.69.97

 # Here are the prerequisite dependancies that need to be installed. 
 # RVM installs dependencies and latest Ruby by default.

 # Install RVM - This will take awhile.
 curl -L https://get.rvm.io | bash -s stable --ruby

 # Set RVM path
 [[ -s "/etc/profile.d/rvm.sh" ]] && . "/etc/profile.d/rvm.sh"

 # Set the RVM path to be set up every time I log in
 echo '[[ -s "/etc/profile.d/rvm.sh" ]] && . "/etc/profile.d/rvm.sh" # Load RVM function' >> ~/.bash_profile

 # Use RUBY 2.0.0 as the default (and current) version of ruby
 rvm use 2.0.0 --default

 # Install SiriProxy gem
 gem install siriproxy

 # Make the .siriproxy directory in my home directory
 mkdir ~/.siriproxy

 # Generate the certificates
 siriproxy gencerts

 # Install the certificate on the iPhone.
 # On your *NIX machine use SCP to copy the certificate from the RPi.
 # Open a terminal window and use the following commands.
 # NOTE: Tweak the address for your RPi STATIC IP address.  
 cd ~/Downloads  
 scp [email protected]:/root/.siriproxy/ca.pem .
 # Attach this file to an email account you have access to on your iPhone.
 # On the iPhone simply tap the file and follow the prompts to install.  

 # Bundle  
 siriproxy bundle

 # Start the server
 siriproxy server
	# $Header: /root/RCS/siriproxy-raspberrypi.txt,v 1.9 2013/11/09 08:11:00 root Exp $
	# $Log: siriproxy-raspberrypi.txt,v $
	# Revision 1.9 2013/11/09 08:11:00 root
	# updated for latest RVM which installs dependencies and Ruby by default
	#
	# Revision 1.8 2013/03/22 20:41:20 root
	# updated for Ruby 2.0.0 and SiriProxy 0.5.2
	#
	# Revision 1.7 2012/12/31 04:42:57 root
	# shorter URL for newark and typos
	#
	# Revision 1.6 2012/12/30 05:33:40 root
	# typo
	#
	# Revision 1.5 2012/12/30 04:29:45 root
	# removed ruby p286 in rvm commands
	#
	# Revision 1.4 2012/12/30 01:39:53 root
	# added resolv.conf edit steps
	#
	# Revision 1.3 2012/12/30 00:22:56 root
	# typo
	#
	# Revision 1.2 2012/12/30 00:11:17 root
	# typo
	#
	# Revision 1.1 2012/12/29 22:28:39 root
	# Initial revision
	#
	# DESCRIPTION: SiriProxy running on a Raspberry Pi computer.
	# AUTHOR: elvisimprsntr
	# CREDITS: This file is derived from plamoni's instructions for getting SiriProxy running on a Ubuntu 11 VM: https://gist.github.com/1428474
	# PREREQUISITES: A Raspberry Pi computer or equivalent device, and a router running www.dd-wrt.com open source firmware.
	# ASSUMPTIONS: This instruction assumes the reader already has some basic NIX command line and editor experience and are remotely logging in to the RPi from a NIX based computer. It is not a BASH script, but the commands and configuration file syntax are formatted to allow one to cut and paste into a terminal window or editor.
	# DISCLAIMER: This was written from notes and memory recall.

	# Purchase a Raspberry Pi, optionally a pre-configured SDC, and what ever other accessories you need to provide power at: www.newark.com/Raspberry-PI

	# Follow the instructions for creating an bootable SDC and booting up for the first time at: http://www.raspberrypi.org/quick-start-guide
	# NOTE: Enable SSH server if you intend to run as a headless system.

	# Since I am running SiriProxy on a dedicated RPi I am not concerned about installing and running everything as ROOT.
	# Set the ROOT password from the user account
	sudo passwd
	# Log out and log back in as ROOT
	# Remove the original user account if you wish
	deluser

	# Update the system
	apt-get update
	apt-get dist-upgrade
	apt-get autoremove

	# Install some basics:
	apt-get install samba samba-common-bin ssh vim rcs unzip -y

	# If you want to add or create SiriPorxy plugins that push custom pictures to Siri, then install APACHE
	# NOTE: The defaults are fine. Your custom images need to reside in /var/www/
	apt-get install apache2 -y

	# If you use your router to reserve a static IP, add the following line to /etc/dhcp/dhclient.conf file.
	supersede domain-name-servers 8.8.8.8, 8.8.4.4;
	# Reboot the RPi
	reboot

	# If you want to define a static IP on the RPi, find out what address your router assigned to your RPi.
	ifconfig
	# Edit the network settings to use a STATIC IP address.
	# NOTE: To make it easy use the same settings your router assigned to your RPi.
	vim /etc/network/interfaces
	# Comment out the DHCP entry. Make the STATIC entry look something like this:
	# NOTE: Tweak the address for your STATIC IP address.
	auto eth0
	iface eth0 inet static
	address 192.168.69.97
	netmask 255.255.255.0
	broadcast 192.168.69.255
	network 192.168.69.0
	gateway 192.168.69.1
	dns-nameservers 8.8.8.8 8.8.4.4
	# Reboot the RPi
	reboot

	# Enable SAMBA support. Tweak the Share Definition section in the /etc/samba/smb.conf file.
	# TIP: If you enable RW access you will be able to create folders and write to the RPi from any client. Also make sure to disable GUEST access.
	vim /etc/samba/smb.conf
	# Add ROOT as a remote user.
	# TIP: Use the same password as the root login to eliminate the need to remember another password.
	smbpasswd –a root
	# Restart SAMBA daemon:
	sh /etc/init.d/samba stop
	sh /etc/init.d/samba start
	# You should now be able to access the RPi file system from any client.

	# In lieu of running DNSMASQ or RubyDNS on the RPi, I opted to use my router to perform a transparent DNS redirect.
	# On a router running www.dd-wrt.com open source firmware, configure a DNS redirect from Apple Siri servers to the STATIC IP address of the RPi.
	# NOTE: Tweak the address for your RPi STATIC IP address.
	# Services -> Additional DNSMasq Options
	# iOS production Siri server
	address=/guzzoni.apple.com/192.168.69.97

	# Here are the prerequisite dependancies that need to be installed.
	# RVM installs dependencies and latest Ruby by default.

	# Install RVM - This will take awhile.
	curl -L https://get.rvm.io \| bash -s stable --ruby

	# Set RVM path
	[[ -s "/etc/profile.d/rvm.sh" ]] && . "/etc/profile.d/rvm.sh"

	# Set the RVM path to be set up every time I log in
	echo '[[ -s "/etc/profile.d/rvm.sh" ]] && . "/etc/profile.d/rvm.sh" # Load RVM function' >> ~/.bash_profile

	# Use RUBY 2.0.0 as the default (and current) version of ruby
	rvm use 2.0.0 --default

	# Install SiriProxy gem
	gem install siriproxy

	# Make the .siriproxy directory in my home directory
	mkdir ~/.siriproxy

	# Generate the certificates
	siriproxy gencerts

	# Install the certificate on the iPhone.
	# On your *NIX machine use SCP to copy the certificate from the RPi.
	# Open a terminal window and use the following commands.
	# NOTE: Tweak the address for your RPi STATIC IP address.
	cd ~/Downloads
	scp [email protected]:/root/.siriproxy/ca.pem .
	# Attach this file to an email account you have access to on your iPhone.
	# On the iPhone simply tap the file and follow the prompts to install.

	# Bundle
	siriproxy bundle

	# Start the server
	siriproxy server
No results found