Easily customise how verbose googletest is with unit test results.

main.cpp

#include "gtest/gtest.h"

using namespace testing;

class ConfigurableEventListener : public TestEventListener
{
    
protected:
    TestEventListener* eventListener;
    
public:
    
    /**
     * Show the names of each test case.
     */
    bool showTestCases;
    
    /**
     * Show the names of each test.
     */
    bool showTestNames;
    
    /**
     * Show each success.
     */
    bool showSuccesses;
    
    /**
     * Show each failure as it occurs. You will also see it at the bottom after the full suite is run.
     */
    bool showInlineFailures;
    
    /**
     * Show the setup of the global environment.
     */
    bool showEnvironment;
    
    explicit ConfigurableEventListener(TestEventListener* theEventListener) : eventListener(theEventListener)
    {
        showTestCases = true;
        showTestNames = true;
        showSuccesses = true;
        showInlineFailures = true;
        showEnvironment = true;
    }
    
    virtual ~ConfigurableEventListener()
    {
        delete eventListener;
    }
    
    virtual void OnTestProgramStart(const UnitTest& unit_test)
    {
        eventListener->OnTestProgramStart(unit_test);
    }
    
    virtual void OnTestIterationStart(const UnitTest& unit_test, int iteration)
    {
        eventListener->OnTestIterationStart(unit_test, iteration);
    }
    
    virtual void OnEnvironmentsSetUpStart(const UnitTest& unit_test)
    {
        if(showEnvironment) {
            eventListener->OnEnvironmentsSetUpStart(unit_test);
        }
    }
    
    virtual void OnEnvironmentsSetUpEnd(const UnitTest& unit_test)
    {
        if(showEnvironment) {
            eventListener->OnEnvironmentsSetUpEnd(unit_test);
        }
    }
    
    virtual void OnTestCaseStart(const TestCase& test_case)
    {
        if(showTestCases) {
            eventListener->OnTestCaseStart(test_case);
        }
    }
    
    virtual void OnTestStart(const TestInfo& test_info)
    {
        if(showTestNames) {
            eventListener->OnTestStart(test_info);
        }
    }
    
    virtual void OnTestPartResult(const TestPartResult& result)
    {
        eventListener->OnTestPartResult(result);
    }
    
    virtual void OnTestEnd(const TestInfo& test_info)
    {
        if((showInlineFailures && test_info.result()->Failed()) || (showSuccesses && !test_info.result()->Failed())) {
            eventListener->OnTestEnd(test_info);
        }
    }
    
    virtual void OnTestCaseEnd(const TestCase& test_case)
    {
        if(showTestCases) {
            eventListener->OnTestCaseEnd(test_case);
        }
    }
    
    virtual void OnEnvironmentsTearDownStart(const UnitTest& unit_test)
    {
        if(showEnvironment) {
            eventListener->OnEnvironmentsTearDownStart(unit_test);
        }
    }
    
    virtual void OnEnvironmentsTearDownEnd(const UnitTest& unit_test)
    {
        if(showEnvironment) {
            eventListener->OnEnvironmentsTearDownEnd(unit_test);
        }
    }
    
    virtual void OnTestIterationEnd(const UnitTest& unit_test, int iteration)
    {
        eventListener->OnTestIterationEnd(unit_test, iteration);
    }
    
    virtual void OnTestProgramEnd(const UnitTest& unit_test)
    {
        eventListener->OnTestProgramEnd(unit_test);
    }
    
};

int main(int argc, char **argv)
{
    // initialize
    ::testing::InitGoogleTest(&argc, argv);
    
    // remove the default listener
    testing::TestEventListeners& listeners = testing::UnitTest::GetInstance()->listeners();
    auto default_printer = listeners.Release(listeners.default_result_printer());
    
    // add our listener, by default everything is on (the same as using the default listener)
    // here I am turning everything off so I only see the 3 lines for the result
    // (plus any failures at the end), like:
    
    // [==========] Running 149 tests from 53 test cases.
    // [==========] 149 tests from 53 test cases ran. (1 ms total)
    // [  PASSED  ] 149 tests.
    
    ConfigurableEventListener *listener = new ConfigurableEventListener(default_printer);
    listener->showEnvironment = false;
    listener->showTestCases = false;
    listener->showTestNames = false;
    listener->showSuccesses = false;
    listener->showInlineFailures = false;
    listeners.Append(listener);
    
    // run
    return RUN_ALL_TESTS();
}

Thanks for posting this!

Source: https://github.com/jaredsburrows/cs-interview-questions/blob/master/src/test/cpp/include/test/configurable_event_listener.h

If you like builders:

    auto *listener = ConfigurableEventListener::Builder(default_printer)
        .showEnvironment()
        .showTestCases()
        .showTestNames()
        .showSuccesses()
        .showInlineFailures()
        .build();

Code:

#include "gtest/gtest.h"

using namespace testing;

class ConfigurableEventListener : public TestEventListener {

    private:
        TestEventListener* eventListener;

        /**
         * Show test program start/end.
         */
        const bool showProgramStartEnd = false;

        /**
         * Show test iterations start/end.
         */
        const bool showIterationsStartEnd = false;

        /**
         * Show the names of each test case.
         */
        const bool showTestCases = false;

        /**
         * Show the names of each test.
         */
        const bool showTestNames = false;

        /**
         * Show each success.
         */
        const bool showSuccesses = false;

        /**
         * Show each failure.
         */
        const bool showFailures = false;

        /**
         * Show each failure as it occurs. You will also see it at the bottom after the full suite is run.
         */
        const bool showInlineFailures = false;

        /**
         * Show the setup of the global environment.
         */
        const bool showEnvironment = false;

        ConfigurableEventListener(TestEventListener* eventListener, const bool showProgramStartEnd,
                                  const bool showIterationsStartEnd, const bool showTestCases,
                                  const bool showTestNames, const bool showSuccesses,
                                  const bool showFailures, const bool showInlineFailures,
                                  const bool showEnvironment)
                                  : eventListener(eventListener), showProgramStartEnd(showProgramStartEnd),
                                  showIterationsStartEnd(showIterationsStartEnd), showTestCases(showTestCases),
                                  showTestNames(showTestNames), showSuccesses(showSuccesses),
                                  showFailures(showFailures), showInlineFailures(showInlineFailures),
                                  showEnvironment(showEnvironment) { }

    public:
        class Builder;

        virtual ~ConfigurableEventListener() override {
            delete this->eventListener;
        }

        // Fired before any test activity starts.
        virtual void OnTestProgramStart(const UnitTest& unit_test) override {
            if (this->showProgramStartEnd) {
                this->eventListener->OnTestProgramStart(unit_test);
            }
        }

        // Fired before each iteration of tests starts.  There may be more than
        // one iteration if GTEST_FLAG(repeat) is set. iteration is the iteration
        // index, starting from 0.
        virtual void OnTestIterationStart(const UnitTest& unit_test, int iteration) override {
            if (this->showIterationsStartEnd) {
                this->eventListener->OnTestIterationStart(unit_test, iteration);
            }
        }

        // Fired before environment set-up for each iteration of tests starts.
        virtual void OnEnvironmentsSetUpStart(const UnitTest& unit_test) override {
            if (this->showEnvironment) {
                this->eventListener->OnEnvironmentsSetUpStart(unit_test);
            }
        }

        // Fired after environment set-up for each iteration of tests ends.
        virtual void OnEnvironmentsSetUpEnd(const UnitTest& unit_test) override {
            if (this->showEnvironment) {
                this->eventListener->OnEnvironmentsSetUpEnd(unit_test);
            }
        }

        // Fired before the test case starts.
        virtual void OnTestCaseStart(const TestCase& test_case) override {
            if (this->showTestCases) {
                this->eventListener->OnTestCaseStart(test_case);
            }
        }

        // Fired before the test starts.
        virtual void OnTestStart(const TestInfo& test_info) override {
            if (this->showTestNames) {
                this->eventListener->OnTestStart(test_info);
            }
        }

        // Fired after a failed assertion or a SUCCEED() invocation.
        virtual void OnTestPartResult(const TestPartResult& result) override {
            if (this->showSuccesses && result.passed()) {
                this->eventListener->OnTestPartResult(result);
            }

            if (this->showFailures && result.failed()) {
                this->eventListener->OnTestPartResult(result);
            }
        }

        // Fired after the test ends.
        virtual void OnTestEnd(const TestInfo& test_info) override {
            if ((this->showInlineFailures && test_info.result()->Failed())
                    || (this->showSuccesses && !test_info.result()->Failed())) {
                this->eventListener->OnTestEnd(test_info);
            }
        }

        // Fired after the test case ends.
        virtual void OnTestCaseEnd(const TestCase& test_case) override {
            if (this->showTestCases) {
                this->eventListener->OnTestCaseEnd(test_case);
            }
        }

        // Fired before environment tear-down for each iteration of tests starts.
        virtual void OnEnvironmentsTearDownStart(const UnitTest& unit_test) override {
            if (this->showEnvironment) {
                this->eventListener->OnEnvironmentsTearDownStart(unit_test);
            }
        }

        // Fired after environment tear-down for each iteration of tests ends.
        virtual void OnEnvironmentsTearDownEnd(const UnitTest& unit_test) override {
            if (this->showEnvironment) {
                this->eventListener->OnEnvironmentsTearDownEnd(unit_test);
            }
        }

        // Fired after each iteration of tests finishes.
        virtual void OnTestIterationEnd(const UnitTest& unit_test, int iteration) override {
            if (this->showIterationsStartEnd) {
                this->eventListener->OnTestIterationEnd(unit_test, iteration);
            }
        }

        // Fired after all test activities have ended.
        virtual void OnTestProgramEnd(const UnitTest& unit_test) override {
            if (this->showProgramStartEnd) {
                this->eventListener->OnTestProgramEnd(unit_test);
            }
        }
};

class ConfigurableEventListener::Builder {
    private:
        TestEventListener* eventListener;
        bool programStartEnd = false;
        bool iterationsStartEnd = false;
        bool testCases = false;
        bool testNames = false;
        bool successes = false;
        bool failures = false;
        bool inlineFailures = false;
        bool environment = false;

    public:
        Builder(TestEventListener* eventListener) {
            this->eventListener = eventListener;
        }

        Builder showProgramStartEnd() {
            this->programStartEnd = true;
            return *this;
        }

        Builder showIterationsStartEnd() {
            this->iterationsStartEnd = true;
            return *this;
        }

        Builder showTestCases() {
            this->testCases = true;
            return *this;
        }

        Builder showTestNames() {
            this->testNames = true;
            return *this;
        }

        Builder showSuccesses() {
            this->successes = true;
            return *this;
        }

        Builder showFailures() {
            this->failures = true;
            return *this;
        }

        Builder showInlineFailures() {
            this->inlineFailures = true;
            return *this;
        }

        Builder showEnvironment() {
            this->environment = true;
            return *this;
        }

        ConfigurableEventListener* build() {
            return new ConfigurableEventListener(this->eventListener, this->programStartEnd, this->iterationsStartEnd,
                        this->testCases, this->testNames, this->successes, this->failures, this->inlineFailures,
                        this->environment);
        }
};

Hey there and thanks so much for posting this!

It really helped me out with my current project.
I have one very tiny suggestion concerning the OnTestEnd:

If you use the GTEST_SKIP() Macro in your test cases to skip tests during run time, a third state "Skipped()" will be returned by test_info.result() which is neither Passed() or Failed().

In this case it might be useful to introduce a new boolean showSkips and to extend the OnTestEnd from

if((showInlineFailures && test_info.result()->Failed()) || (showSuccesses && !test_info.result()->Failed())) { eventListener->OnTestEnd(test_info); }

to
if((showInlineFailures && test_info.result()->Failed()) || (showSuccesses && test_info.result()->Passed()) || (showSkips && test_info.result()->Skipped())){ eventListener->OnTestEnd(test_info); }

That way, every three possible states are defined and can be toggled on/off separately.
Just thought I put this in here, in case someone is looking for this.

cheers,
Simon