.vimrc

.vimrc

" When started as "evim", evim.vim will already have done these settings.
if v:progname =~? "evim"
  finish
endif

" Use Vim settings, rather than Vi settings (much better!).
" This must be first, because it changes other options as a side effect.
set nocompatible

" set the runtime path to include Vundle and initialize
set rtp+=~/.vim/bundle/Vundle.vim
call vundle#begin()

" let Vundle manage Vundle, required
Plugin 'VundleVim/Vundle.vim'

" Vundle plugins
Bundle 'gabrielelana/vim-markdown'
Plugin 'tpope/vim-fireplace'

" All of your Plugins must be added before the following line
call vundle#end()            " required
filetype plugin indent on    " required

" allow backspacing over everything in insert mode
set backspace=indent,eol,start

set dir=~/.vim/swapfiles
set backupdir=~/.vim/backups
set undodir=~/.vim/undos
set backup		" keep a backup file (restore to previous version)
set undofile		" keep an undo file (undo changes after closing)
set swapfile

set history=50		" keep 50 lines of command line history
set ruler		" show the cursor position all the time
set showcmd		" display incomplete commands
set incsearch		" do incremental searching

" Don't use Ex mode, use Q for formatting
map Q gq

" CTRL-U in insert mode deletes a lot.  Use CTRL-G u to first break undo,
" so that you can undo CTRL-U after inserting a line break.
inoremap <C-U> <C-G>u<C-U>

" In many terminal emulators the mouse works just fine, thus enable it.
if has('mouse')
  set mouse=a
endif

" Switch syntax highlighting on, when the terminal has colors
" Also switch on highlighting the last used search pattern.
if &t_Co > 2 || has("gui_running")
  syntax on
  colorscheme smyck
  set hlsearch
endif

" Only do this part when compiled with support for autocommands.
if has("autocmd")

  " Enable file type detection.
  " Use the default filetype settings, so that mail gets 'tw' set to 72,
  " 'cindent' is on in C files, etc.
  " Also load indent files, to automatically do language-dependent indenting.
  filetype plugin indent on

  " Put these in an autocmd group, so that we can delete them easily.
  augroup vimrcEx
  au!

  " For all text files set 'textwidth' to 78 characters.
  autocmd FileType text setlocal textwidth=78

  " When editing a file, always jump to the last known cursor position.
  " Don't do it when the position is invalid or when inside an event handler
  " (happens when dropping a file on gvim).
  autocmd BufReadPost *
    \ if line("'\"") >= 1 && line("'\"") <= line("$") |
    \   exe "normal! g`\"" |
    \ endif

  augroup END

else

  set autoindent		" always set autoindenting on

endif " has("autocmd")

" Convenient command to see the difference between the current buffer and the
" file it was loaded from, thus the changes you made.
" Only define it when not defined already.
if !exists(":DiffOrig")
  command DiffOrig vert new | set bt=nofile | r ++edit # | 0d_ | diffthis
		  \ | wincmd p | diffthis
endif

if has('langmap') && exists('+langnoremap')
  " Prevent that the langmap option applies to characters that result from a
  " mapping.  If unset (default), this may break plugins (but it's backward
  " compatible).
  set langnoremap
endif

set textwidth=80
set expandtab		" use spaces for tabs
set tabstop=2
set softtabstop=2
set shiftwidth=2
set nu

set showmatch		" highlight matching parentheses
set ignorecase		" ignore case when searching

" remove trailing spaces on save
autocmd BufWritePre * %s/\s\+$//e

"" add closing brace and tab with open brace
:imap { {<CR><tab><CR><BS>}<Esc>k$a


"" comment lines with forward slashes
:nmap <C-_> ^i// <Esc>
:nmap <C-\> ^xxx
:vmap <C-_> :s/^/\/\/ /g<CR>
:vmap <C-\> :s/^\/\/\ //g<CR>

autocmd Filetype gitcommit setlocal spell textwidth=72
autocmd Filetype gitcommit setlocal spell textwidth=72
autocmd BufNewFile,BufRead *.tex set spell
autocmd BufNewFile,BufRead *.tex iunmap {
autocmd BufNewFile,BufRead *.tex nmap <F5> :!pdflatex %<enter>
autocmd BufNewFile,BufRead *.tex :nmap <C-_> ^i% <Esc>
autocmd BufNewFile,BufRead *.tex :nmap <C-\> ^xx
autocmd BufNewFile,BufRead *.tex :vmap <C-_> :s/^/% /g<CR>
autocmd BufNewFile,BufRead *.tex :vmap <C-\> :s/^% //g<CR>

autocmd BufNewFile,BufRead *.py :nmap <C-_> ^i# <Esc>
autocmd BufNewFile,BufRead *.py :nmap <C-\> ^xx
autocmd BufNewFile,BufRead *.py :vmap <C-_> :s/^/# /g<CR>
autocmd BufNewFile,BufRead *.py :vmap <C-\> :s/^# //g<CR>
autocmd BufNewFile,BufRead *.py nmap <F5> :!python %<enter>
"
"autocmd BufNewFile,BufRead *.sh :nmap <C-_> ^i# <Esc>
"autocmd BufNewFile,BufRead *.sh :nmap <C-\> ^xx
"autocmd BufNewFile,BufRead *.sh :vmap <C-_> :s/^/# /g<CR>
"autocmd BufNewFile,BufRead *.sh :vmap <C-\> :s/^# //g<CR>
"
"autocmd BufNewFile,BufRead *.rb iunmap {
"autocmd BufNewFile,BufRead *.rb :nmap <C-_> ^i# <Esc>
"autocmd BufNewFile,BufRead *.rb :nmap <C-\> ^xx
"autocmd BufNewFile,BufRead *.rb :vmap <C-_> :s/^/# /g<CR>
"autocmd BufNewFile,BufRead *.rb :vmap <C-\> :s/^# //g<CR>
"
"autocmd BufNewFile,BufRead *.hs :nmap <C-_> ^i-- <Esc>
"autocmd BufNewFile,BufRead *.hs :nmap <C-\> ^xxx
"autocmd bufnewfile,bufread *.hs :vmap <c-_> :s/^/{- /g<cr>gv:s/$/ -}/g<cr>
"autocmd BufNewFile,BufRead *.hs :vmap <C-\> :s/^{- //g<CR>gv:s/ -}$//g<CR>
"
"autocmd BufNewFile,BufRead *.html* iunmap {
"autocmd BufNewFile,BufRead *.html* :nmap <C-\> ^xxxxx$xxxx
"autocmd bufnewfile,bufread *.html* :vmap <c-_> :s/^/<!-- /g<cr>gv:s/$/
"-->/g<cr>
"autocmd BufNewFile,BufRead *.html* :nmap <C-_> ^i<!-- <Esc>$a --><Esc>
"autocmd BufNewFile,BufRead *.html* :vmap <C-\> :s/^<!-- //g<CR>gv:s/
"-->$//g<CR>
"
autocmd BufNewFile,BufRead *.py iunmap {
autocmd BufNewFile,BufRead *.html iunmap {
autocmd BufNewFile,BufRead *.sh iunmap {
autocmd BufNewFile,BufRead *.txt iunmap {
autocmd BufNewFile,BufRead *.md iunmap {
autocmd BufNewFile,BufRead *.hs iunmap {
"
"
"" Paste without overwriting register
function! RestoreRegister()
	  let @" = s:restore_reg
	    return ''
    endfunction

    function! s:Repl()
	        let s:restore_reg = @"
		    return "p@=RestoreRegister()\<cr>"
	    endfunction

	    " NB: this supports "rp that replaces the selection by the
	    " contents of @r
	    " vnoremap <silent> <expr> p <sid>Repl()

"" press space to insert a single character
:nnoremap <Space> i_<Esc>r