cscashby

---
substitutions:
  devicename: "plug-XXX"
  upper_devicename: "Plug XXX"
  # Higher value gives lower watt readout
  current_res: "0.002452"
  # Lower value gives lower voltage readout
  voltage_div: "939"
  # GPIO config
  sel_pin: GPIO12

cscashby

# This file contains common pin mappings for the Fysetc Spider board.
# To use this config, the firmware should be compiled for the STM32F446.
# When calling "menuconfig", enable "extra low-level configuration setup"
# and select the "12MHz crystal" as clock reference
# For flashing, write the compiled klipper.bin to memory location 0x08000000

# See docs/Config_Reference.md for a description of parameters.

## Voron Design VORON2 250/300/350mm Spider TMC2209 UART config

cscashby

# This file contains common pin mappings for the Fysetc Spider board.
# To use this config, the firmware should be compiled for the STM32F446.
# When calling "menuconfig", enable "extra low-level configuration setup"
# and select the "12MHz crystal" as clock reference
# For flashing, write the compiled klipper.bin to memory location 0x08000000

# See docs/Config_Reference.md for a description of parameters.

## Voron Design VORON2 250/300/350mm Spider TMC2209 UART config

cscashby

/interface ethernet
set [ find default-name=ether1 ] name=cam1
set [ find default-name=ether2 ] name=cam2
set [ find default-name=ether3 ] name=cam3
set [ find default-name=ether4 ] name=cam4
/interface list
add name=CAMERAS
/routing table
add fib name=cam1
add fib name=cam2

cscashby

Keybase proof

I hereby claim:

• I am cscashby on github.
• I am babelmonk (https://keybase.io/babelmonk) on keybase.
• I have a public key whose fingerprint is 965C FD43 A02E 2C80 950C ED28 4B0E D831 33DE 5C63

To claim this, I am signing this object: