Xiao Ge bynil

Overview

Syncing an Ethereum node is largely reliant on latency and IOPS, I/O Per Second, of the storage. Budget SSDs will struggle to an extent, and some won't be able to sync at all. IOPS can roughly be used as proxy of / predictor for latency. Measuring latency directly is arguably better.

This document aims to snapshot some known good and known bad models.

The drive lists are ordered by interface and then by capacity and alphabetically by vendor name, not by preference. The lists are not exhaustive at all. @mwpastore linked a filterable spreadsheet in comments that has a far greater variety of drives and their characteristics. Filter it by DRAM yes, NAND Type TLC, Form Factor M.2, and desired capacity.

For size, 4TB is a very conservative choice. The smaller 2TB drive should last an Ethereum full node until at least sometime 2026, with the [pre-merge history expiry](https://hackmd.io/@hBXHLw_9Qq2va4pRt

注意：本文内容适用于 Tmux 2.3 及以上的版本，但是绝大部分的特性低版本也都适用，鼠标支持、VI 模式、插件管理在低版本可能会与本文不兼容。

Tmux 快捷键 & 速查表 & 简明教程

启动新会话：

tmux [new -s 会话名 -n 窗口名]

恢复会话：

tmux shortcuts & cheatsheet

start new:

tmux

start new with session name:

tmux new -s myname

	#!/usr/bin/env zsh
	brew install lrzsz

	recv='/usr/local/bin/iterm2-recv-zmodem.sh'
	send='/usr/local/bin/iterm2-send-zmodem.sh'

	curl -sSL https://github.com/RobberPhex/iTerm2-zmodem/raw/master/iterm2-recv-zmodem.sh -o "$recv"
	curl -sSL https://github.com/RobberPhex/iTerm2-zmodem/raw/master/iterm2-send-zmodem.sh -o "$send"

	chmod +x "$recv" "$send"

	$ sudo nano /etc/systemd/system/startup.service

	[Unit]
	Description=Startup

	[Service]
	ExecStart=/usr/local/bin/startup.sh

	[Install]
	WantedBy=default.target

	# 你可以从该 URL 下载这个配置文件: http://surge.run/config-example/ios.conf
	# 用编辑器编辑后，再通过 iTunes, URL, AirDrop 或者 iCloud Drive 复制回 iOS 设备
	# Version 2.0

	[General]
	# 日志等级: warning, notify, info, verbose (默认值: notify)
	loglevel = notify
	# 跳过某个域名或者 IP 段，这些目标主机将不会由 Surge Proxy 处理。(在 macOS
	# 版本中，如果启用了 Set as System Proxy, 那么这些值会被写入到系统网络代理
	# 设置中.)

	__author__ = 'dhcdht'

	import os
	import re

	plugin_path = os.path.expanduser('~/Library/Application Support/Developer/Shared/Xcode/Plug-ins')
	#for Xcode 6.3
	#plugin_uuid = '9F75337B-21B4-4ADC-B558-F9CADF7073A7'
	#for Xcode 6.3.2
	#plugin_uuid = 'E969541F-E6F9-4D25-8158-72DC3545A6C6'

	#!/bin/sh

	#ID='A16FF353-8441-459E-A50C-B071F53F51B7' # Xcode 6.2
	ID='992275C1-432A-4CF7-B659-D84ED6D42D3F' # Xcode 6.3

	PLIST_BUDDY=/usr/libexec/PlistBuddy

	function add_compatibility() {
	"$PLIST_BUDDY" -c "Add DVTPlugInCompatibilityUUIDs:10 string $2" \
	"$1/Contents/Info.plist"

	<?xml version="1.0" encoding="UTF-8"?>
	<Bucket
	type = "2"
	version = "2.0">
	<Breakpoints>
	<BreakpointProxy
	BreakpointExtensionID = "Xcode.Breakpoint.SymbolicBreakpoint">
	<BreakpointContent
	shouldBeEnabled = "Yes"
	ignoreCount = "0"

	# xcode-build-bump.sh
	# @desc Auto-increment the build number every time the project is run.
	# @usage
	# 1. Select: your Target in Xcode
	# 2. Select: Build Phases Tab
	# 3. Select: Add Build Phase -> Add Run Script
	# 4. Paste code below in to new "Run Script" section
	# 5. Drag the "Run Script" below "Link Binaries With Libraries"
	# 6. Insure that your starting build number is set to a whole integer and not a float (e.g. 1, not 1.0)