Last active
December 8, 2020 19:53
-
-
Save brimston3/79f661accbceb9e4b3ac3c52ab1cb036 to your computer and use it in GitHub Desktop.
Anki Vector boot up (115200 8N1)
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| Format: Log Type - Time(microsec) - Message - Optional Info | |
| Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic | |
| S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2.C2-00037 | |
| S - IMAGE_VARIANT_STRING=DAASANAZA | |
| S - OEM_IMAGE_VERSION_STRING=CRM | |
| S - Boot Config, 0x000000e1 | |
| B - 1566 - PBL, Start | |
| B - 4542 - bootable_media_detect_entry, Start | |
| B - 43424 - bootable_media_detect_success, Start | |
| B - 43428 - elf_loader_entry, Start | |
| B - 44715 - auth_hash_seg_entry, Start | |
| B - 64974 - auth_hash_seg_exit, Start | |
| B - 79485 - elf_segs_hash_verify_entry, Start | |
| B - 138572 - PBL, End | |
| B - 120597 - SBL1, Start | |
| B - 166347 - boot_flash_init, Start | |
| D - 30 - boot_flash_init, Delta | |
| B - 171562 - boot_config_data_table_init, Start | |
| D - 11803 - boot_config_data_table_init, Delta - (534 Bytes) | |
| B - 186995 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:2,Subtype:8 | |
| B - 192241 - pm_device_init, Start | |
| B - 194742 - pm_device_init, TEST - MSM8909 detected | |
| B - 199043 - pm_device_init, INFO - PM8916 is selected | |
| B - 212524 - PM_SET_VAL:Skip | |
| D - 19398 - pm_device_init, Delta | |
| B - 213896 - sbl1_ddr_set_params, Start | |
| B - 216367 - cpr_init, Start | |
| D - 0 - cpr_init, Delta | |
| B - 221948 - Pre_DDR_clock_init, Start | |
| D - 183 - Pre_DDR_clock_init, Delta | |
| D - 0 - sbl1_ddr_set_params, Delta | |
| B - 234850 - pm_driver_init, Start | |
| B - 241773 - --> Charge init | |
| B - 3795 - battery voltage | |
| B - 245250 - boot up | |
| B - 10 - Current status | |
| D - 10644 - pm_driver_init, Delta | |
| B - 257298 - clock_init, Start | |
| D - 152 - clock_init, Delta | |
| B - 726113 - Image Load, Start | |
| D - 147285 - QSEE Image Loaded, Delta - (462088 Bytes) | |
| B - 873428 - Image Load, Start | |
| D - 244 - SEC Image Loaded, Delta - (2048 Bytes) | |
| B - 881846 - sbl1_efs_handle_cookies, Start | |
| D - 640 - sbl1_efs_handle_cookies, Delta | |
| B - 888434 - Image Load, Start | |
| D - 76372 - RPM Image Loaded, Delta - (156468 Bytes) | |
| B - 964837 - Image Load, Start | |
| D - 123220 - APPSBL Image Loaded, Delta - (375868 Bytes) | |
| B - 1088118 - QSEE Execution, Start | |
| D - 366 - QSEE Execution, Delta | |
| B - 1093852 - SBL1, End | |
| D - 975542 - SBL1, Delta | |
| S - Throughput, 34000 KB/s (997006 Bytes, 29212 us) | |
| S - DDR Frequency, 400 MHz | |
| Android Bootloader - UART_DM Initialized!!! | |
| [290] Channel alloc freed | |
| [ 0.000000] Booting Linux on physical CPU 0x0 | |
| [ 0.000000] Initializing cgroup subsys cpu | |
| [ 0.000000] Initializing cgroup subsys cpuacct | |
| [ 0.000000] Linux version 3.18.66-perf (build@vic-os-build-071018) (gcc version 4.9.3 (GCC) ) #1 SMP PREEMPT Fri Apr 5 17:26:37 PDT 2019 | |
| [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d | |
| [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
| [ 0.000000] Machine model: ANKI Victor Headboard | |
| [ 0.000000] Reserved memory: reserved region for node 'external_image__region@0': base 0x87a00000, size 6 MiB | |
| [ 0.000000] Reserved memory: reserved region for node 'modem_adsp_region@0': base 0x88000000, size 36 MiB | |
| [ 0.000000] Reserved memory: reserved region for node 'pheripheral_region@0': base 0x8a400000, size 7 MiB | |
| [ 0.000000] Reserved memory: reserved region for node 'splash_region@83000000': base 0x83000000, size 12 MiB | |
| [ 0.000000] Removed memory: created DMA memory pool at 0x87a00000, size 6 MiB | |
| [ 0.000000] Reserved memory: initialized node external_image__region@0, compatible id removed-dma-pool | |
| [ 0.000000] Removed memory: created DMA memory pool at 0x88000000, size 36 MiB | |
| [ 0.000000] Reserved memory: initialized node modem_adsp_region@0, compatible id removed-dma-pool | |
| [ 0.000000] Removed memory: created DMA memory pool at 0x8a400000, size 7 MiB | |
| [ 0.000000] Reserved memory: initialized node pheripheral_region@0, compatible id removed-dma-pool | |
| [ 0.000000] Reserved memory: allocated memory for 'venus_qseecom_region@0' node: base 0x8f800000, size 8 MiB | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x8f800000, size 8 MiB | |
| [ 0.000000] Reserved memory: initialized node venus_qseecom_region@0, compatible id shared-dma-pool | |
| [ 0.000000] Reserved memory: allocated memory for 'audio_region@0' node: base 0x9f800000, size 4 MiB | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x9f800000, size 4 MiB | |
| [ 0.000000] Reserved memory: initialized node audio_region@0, compatible id shared-dma-pool | |
| [ 0.000000] Reserved memory: allocated memory for 'adsp_region@0' node: base 0x9f400000, size 4 MiB | |
| [ 0.000000] Reserved memory: created CMA memory pool at 0x9f400000, size 4 MiB | |
| [ 0.000000] Reserved memory: initialized node adsp_region@0, compatible id shared-dma-pool | |
| [ 0.000000] cma: Reserved 16 MiB at 0x9e400000 | |
| [ 0.000000] Memory policy: Data cache writealloc | |
| [ 0.000000] PERCPU: Embedded 10 pages/cpu @dfd59000 s9984 r8192 d22784 u40960 | |
| [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 116996 | |
| [ 0.000000] Kernel command line: androidboot.bootdevice=7824900.sdhci androidboot.authorized_kernel=true androidboot.baseband=apqnoinitrd ro console=ttyHSL0,115200,n8 androidboot.hardware=qcom ehci-hcd.park=3 msm_rtb.filter=0x37 lpm_levels.sleep_disabled=1 rootwait androidboot.bootdevice=7824900.sdhci mem=511M dm-verity.dev_wait=1 dm="system none ro,0 1179648 verity 1 179:22 179:22 4096 4096 147456 147457 sha256 757fb7211ca70c0cd584f51c9ff002cb13b67a29c7c8f1121f4124f371d1d7e7 ab537db38f41ee4789f0ceee247dabe1c3093cd6875e35064a4c5f6b46785f82" root=/dev/dm-0 androidboot.slot_suffix=_a rootwait ro | |
| [ 0.000000] device-mapper: init: will configure 1 devices | |
| [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) | |
| [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | |
| [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | |
| [ 0.000000] Memory: 398620K/472064K available (9216K kernel code, 918K rwdata, 4112K rodata, 309K init, 1328K bss, 73444K reserved) | |
| [ 0.000000] Virtual kernel memory layout: | |
| [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
| [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
| [ 0.000000] vmalloc : 0xe0000000 - 0xff000000 ( 496 MB) | |
| [ 0.000000] lowmem : 0xc0000000 - 0xdff00000 ( 511 MB) | |
| [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) | |
| [ 0.000000] .text : 0xc0008000 - 0xc0a00000 (10208 kB) | |
| [ 0.000000] .init : 0xc0f00000 - 0xc0f4d700 ( 310 kB) | |
| [ 0.000000] .data : 0xc1000000 - 0xc10e5970 ( 919 kB) | |
| [ 0.000000] .bss : 0xc10e80c4 - 0xc1234248 (1329 kB) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
| [ 0.000000] Preemptible hierarchical RCU implementation. | |
| [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. | |
| [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP. | |
| [ 0.000000] NR_IRQS:16 nr_irqs:16 16 | |
| [ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent | |
| [ 0.000000] MPM 1 irq mapping errored -517 | |
| [ 0.000000] NO_HZ: Clearing 0 from nohz_full range for timekeeping | |
| [ 0.000000] NO_HZ: Full dynticks CPUs: 1-3. | |
| [ 0.000000] Offload RCU callbacks from CPUs: 1-3. | |
| [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt). | |
| [ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns | |
| [ 0.000022] Switching to timer-based delay loop, resolution 52ns | |
| [ 0.000038] Switched to clocksource arch_sys_counter | |
| [ 0.000885] Console: colour dummy device 80x30 | |
| [ 0.000904] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) | |
| [ 0.000918] pid_max: default: 32768 minimum: 301 | |
| [ 0.000999] Security Framework initialized | |
| [ 0.001089] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| [ 0.001102] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
| [ 0.001747] Initializing cgroup subsys freezer | |
| [ 0.001766] Initializing cgroup subsys debug | |
| [ 0.001808] CPU: Testing write buffer coherency: ok | |
| [ 0.002145] /cpus/cpu@0 missing clock-frequency property | |
| [ 0.002164] /cpus/cpu@1 missing clock-frequency property | |
| [ 0.002179] /cpus/cpu@2 missing clock-frequency property | |
| [ 0.002196] /cpus/cpu@3 missing clock-frequency property | |
| [ 0.002324] Setting up static identity map for 0x80982b08 - 0x80982b60 | |
| [ 0.032819] MSM Memory Dump base table set up | |
| [ 0.032856] MSM Memory Dump apps data table set up | |
| [ 0.037388] CPU1: Booted secondary processor | |
| [ 0.041433] CPU2: Booted secondary processor | |
| [ 0.045414] CPU3: Booted secondary processor | |
| [ 0.045516] Brought up 4 CPUs | |
| [ 0.045541] SMP: Total of 4 processors activated (153.60 BogoMIPS). | |
| [ 0.045548] CPU: All CPU(s) started in SVC mode. | |
| [ 0.046495] devtmpfs: initialized | |
| [ 0.050753] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 | |
| [ 0.054430] pinctrl core: initialized pinctrl subsystem | |
| [ 0.054842] regulator-dummy: no parameters | |
| [ 0.100618] NET: Registered protocol family 16 | |
| [ 0.103184] DMA: preallocated 256 KiB pool for atomic coherent allocations | |
| [ 0.170110] cpuidle: using governor ladder | |
| [ 0.190102] cpuidle: using governor menu | |
| [ 0.210093] cpuidle: using governor qcom | |
| [ 0.225354] irq: no irq domain found for /soc/pinctrl@1000000 ! | |
| [ 0.228695] spmi_pmic_arb 200f000.qcom,spmi: missing property: qcom,pmic-arb-max-peripherals | |
| [ 0.228712] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000 | |
| [ 0.229192] spmi_pmic_arb 200f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts | |
| [ 0.233769] msm_watchdog b017000.qcom,wdt: wdog absent resource not present | |
| [ 0.234071] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized | |
| [ 0.235635] platform 1de0000.qcom,venus: assigned reserved memory node venus_qseecom_region@0 | |
| [ 0.238379] platform soc:qcom,mdsprpc-mem: assigned reserved memory node adsp_region@0 | |
| [ 0.239984] platform a21b000.qcom,pronto: assigned reserved memory node pheripheral_region@0 | |
| [ 0.240340] platform 4080000.qcom,mss: assigned reserved memory node modem_adsp_region@0 | |
| [ 0.241619] mem_acc_corner: 0 <--> 0 mV | |
| [ 0.245852] hw-breakpoint: Failed to enable monitor mode on CPU 0. | |
| [ 0.248162] __of_mpm_init(): MPM driver mapping exists | |
| [ 0.248739] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches | |
| [ 0.248751] msm_rpm_dev_probe: APSS-RPM communication over SMD | |
| [ 0.248762] smd_open() before smd_init() | |
| [ 0.250462] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 | |
| [ 0.250546] msm_smem_init: unable to create logging context | |
| [ 0.252432] msm_smd_init: unable to create SMD logging context | |
| [ 0.252444] msm_smd_init: unable to create SMSM logging context | |
| [ 0.254138] smd_channel_probe_now: allocation table not initialized | |
| [ 0.254270] smd_channel_probe_now: allocation table not initialized | |
| [ 0.257492] 8916_s2: 1050 <--> 1350 mV at 1225 mV normal idle | |
| [ 0.257668] spm_regulator_probe: name=8916_s2, range=LV, voltage=1225000 uV, mode=PWM, step rate=1200 uV/us | |
| [ 0.258244] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000) | |
| [ 0.258287] cpr_read_fuse_revision: apc_corner: fuse revision = 3 | |
| [ 0.258307] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x5041482217f550da, speed_bits = 0 | |
| [ 0.258399] cpr_pvs_per_corner_init: apc_corner: Warning: initial voltage[2] 1025000 below floor 1050000 | |
| [ 0.258414] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1050000 1250000] uV | |
| [ 0.258426] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV | |
| [ 0.258438] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1155000] uV | |
| [ 0.262439] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe | |
| [ 0.262453] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues. | |
| [ 0.262471] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues | |
| [ 0.262483] msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 | |
| [ 0.262765] Failed to create IPC log0 | |
| [ 0.262774] Failed to create IPC log1 | |
| [ 0.262780] Failed to create IPC log2 | |
| [ 0.262787] Failed to create IPC log3 | |
| [ 0.262793] Failed to create IPC log4 | |
| [ 0.263292] sps:sps is ready. | |
| [ 0.267228] msm_rpm_glink_dt_parse: qcom,rpm-glink compatible not matches | |
| [ 0.267242] msm_rpm_dev_probe: APSS-RPM communication over SMD | |
| [ 0.268066] 8916_s1_corner: 0 <--> 0 mV at 0 mV normal idle | |
| [ 0.268602] 8916_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle | |
| [ 0.269132] 8916_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle | |
| [ 0.269634] pm8909_s1_corner_so: 0 <--> 0 mV at 0 mV normal idle | |
| [ 0.270392] 8916_l1: 1225 mV normal idle | |
| [ 0.271095] 8916_l2: 1200 mV normal idle | |
| [ 0.271795] 8916_l3: 500 <--> 1287 mV at 0 mV normal idle | |
| [ 0.272326] 8916_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle | |
| [ 0.272829] 8916_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle | |
| [ 0.273563] 8916_l4: 1800 mV normal idle | |
| [ 0.274278] 8916_l5: 1800 mV normal idle | |
| [ 0.274959] 8916_l6: 1800 mV normal idle | |
| [ 0.275636] 8916_l7: 1800 mV normal idle | |
| [ 0.276125] 8916_l7_ao: 1800 mV normal idle | |
| [ 0.276593] 8916_l7_so: 1800 mV normal idle | |
| [ 0.277267] 8916_l8: 2850 <--> 2900 mV at 2850 mV normal idle | |
| [ 0.277933] 8916_l9: 3300 mV normal idle | |
| [ 0.278613] 8916_l10: 2700 <--> 2800 mV at 2700 mV normal idle | |
| [ 0.279307] 8916_l11: 1800 <--> 2950 mV at 1800 mV normal idle | |
| [ 0.279975] 8916_l12: 1800 <--> 2950 mV at 1800 mV normal idle | |
| [ 0.280671] 8916_l13: 3075 mV normal idle | |
| [ 0.281366] 8916_l14: 1800 <--> 3300 mV at 1800 mV normal idle | |
| [ 0.282046] 8916_l15: 1800 <--> 3300 mV at 1800 mV normal idle | |
| [ 0.282739] 8916_l17: 2850 mV normal idle | |
| [ 0.283440] 8916_l18: 2700 mV normal idle | |
| [ 0.284129] 8916_s3: 1200 <--> 1300 mV at 1200 mV normal idle | |
| [ 0.284830] 8916_s4: 1800 <--> 2100 mV at 1800 mV normal idle | |
| [ 0.285517] 8916_l16: 1800 <--> 3300 mV at 1800 mV normal idle | |
| [ 0.285777] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517 | |
| [ 0.286136] cpr_efuse_init: apc_corner: efuse_addr = 0x00058000 (len=0x1000) | |
| [ 0.286182] cpr_read_fuse_revision: apc_corner: fuse revision = 3 | |
| [ 0.286202] cpr_parse_speed_bin_fuse: apc_corner: [row: 1]: 0x5041482217f550da, speed_bits = 0 | |
| [ 0.286292] cpr_pvs_per_corner_init: apc_corner: Warning: initial voltage[2] 1025000 below floor 1050000 | |
| [ 0.286307] cpr_pvs_init: apc_corner: pvs voltage: [1050000 1050000 1250000] uV | |
| [ 0.286320] cpr_pvs_init: apc_corner: ceiling voltage: [1050000 1225000 1350000] uV | |
| [ 0.286332] cpr_pvs_init: apc_corner: floor voltage: [1050000 1050000 1155000] uV | |
| [ 0.286552] cpr_init_cpr_parameters: apc_corner: up threshold = 0, down threshold = 2 | |
| [ 0.286580] cpr_init_cpr_parameters: apc_corner: CPR is enabled by default. | |
| [ 0.286612] cpr_init_cpr_efuse: apc_corner: [row:26] = 0x588c8e0323d1322b | |
| [ 0.286633] cpr_init_cpr_efuse: apc_corner: CPR disable fuse = 0 | |
| [ 0.286649] cpr_init_cpr_efuse: apc_corner: Corner[1]: ro_sel = 2, target quot = 803 | |
| [ 0.286662] cpr_init_cpr_efuse: apc_corner: Corner[2]: ro_sel = 2, target quot = 803 | |
| [ 0.286676] cpr_init_cpr_efuse: apc_corner: Corner[3]: ro_sel = 2, target quot = 1224 | |
| [ 0.286745] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 2 quotient adjustment scaling factor: 0.000 | |
| [ 0.286757] cpr_get_corner_quot_adjustment: apc_corner: fuse corner 3 quotient adjustment scaling factor: 0.901 | |
| [ 0.286773] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[1] = 803 | |
| [ 0.286782] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[2] = 803 | |
| [ 0.286791] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[3] = 803 | |
| [ 0.286800] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[4] = 803 | |
| [ 0.286809] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[5] = 982 | |
| [ 0.286819] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[6] = 1069 | |
| [ 0.286828] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[7] = 1155 | |
| [ 0.286837] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[8] = 1207 | |
| [ 0.286846] cpr_get_corner_quot_adjustment: apc_corner: adjusted quotient[9] = 1224 | |
| [ 0.286979] cpr_config: apc_corner: Timer count: 0x17700 (for 5000 us) | |
| [ 0.287464] apc_corner: 0 <--> 0 mV | |
| [ 0.287995] msm_thermal:sensor_mgr_init_threshold threshold id already initialized | |
| [ 0.288409] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) | |
| [ 0.288424] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19 | |
| [ 0.288433] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init. | |
| [ 0.289293] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) | |
| [ 0.289307] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19 | |
| [ 0.289320] cpu cpu0: dev_pm_opp_get_opp_count: device OPP not found (-19) | |
| [ 0.289330] msm_thermal:get_cpu_freq_plan_len Error reading CPU0 freq table len. error:-19 | |
| [ 0.293963] qcom,rpmcc-8909 1800000.qcom,rpmcc: Registered RPM clocks. | |
| [ 0.300972] qcom,gcc-8909 1800000.qcom,gcc: Registered GCC clocks | |
| [ 0.301372] clock-a7 b011050.qcom,clock-a7: Speed bin: 0 PVS Version: 0 | |
| [ 0.301446] a7ssmux: set OPP pair(200000000 Hz: 1 uV) on cpu0 | |
| [ 0.301486] a7ssmux: set OPP pair(1267200000 Hz: 9 uV) on cpu0 | |
| [ 0.357030] KPI: Bootloader start count = 37892 | |
| [ 0.357041] KPI: Bootloader end count = 47730 | |
| [ 0.357049] KPI: Bootloader display count = 1615870036 | |
| [ 0.357057] KPI: Bootloader load kernel count = 2658 | |
| [ 0.357065] KPI: Kernel MPM timestamp = 75409 | |
| [ 0.357072] KPI: Kernel MPM Clock frequency = 32768 | |
| [ 0.357101] socinfo_print: v0.10, id=265, ver=2.0, raw_id=2408, raw_ver=1, hw_plat=8, hw_plat_ver=65538 | |
| [ 0.357101] accessory_chip=0, hw_plat_subtype=8, pmic_model=65547, pmic_die_revision=131072 foundry_id=1 serial_number=401952986 | |
| [ 0.358509] SCSI subsystem initialized | |
| [ 0.359122] usbcore: registered new interface driver usbfs | |
| [ 0.359207] usbcore: registered new interface driver hub | |
| [ 0.359371] usbcore: registered new device driver usb | |
| [ 0.360014] i2c-msm-v2 78ba000.i2c: probing driver i2c-msm-v2 | |
| [ 0.360168] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready. | |
| [ 0.360184] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem) | |
| [ 0.361408] media: Linux media interface: v0.10 | |
| [ 0.361490] Linux video capture interface: v2.00 | |
| [ 0.361805] BATTERY: batterydata_init: Battery-data device created! | |
| [ 0.362772] cpufreq: driver msm up and running | |
| [ 0.363214] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node venus_qseecom_region@0 | |
| [ 0.363417] platform soc:qcom,ion:qcom,ion-heap@28: assigned reserved memory node audio_region@0 | |
| [ 0.363605] platform soc:qcom,ion:qcom,ion-heap@26: assigned reserved memory node modem_adsp_region@0 | |
| [ 0.363789] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region@0 | |
| [ 0.364107] ION heap system created | |
| [ 0.364223] ION heap qsecom created at 0x8f800000 with size 800000 | |
| [ 0.364236] ION heap audio created at 0x9f800000 with size 400000 | |
| [ 0.364248] ION heap pil_2 created at 0x88000000 with size 2400000 | |
| [ 0.364258] ION heap adsp created at 0x9f400000 with size 400000 | |
| [ 0.364630] msm_bus_fabric_init_driver | |
| [ 0.377873] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from CBL (external power supply) and 'cold' boot | |
| [ 0.377896] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Unknown power-off reason | |
| [ 0.378124] input: qpnp_pon as /devices/virtual/input/input0 | |
| [ 0.378791] PMIC@SID0: PM8916 v2.0 options: 0, 2, 0, 0 | |
| [ 0.379069] gdsc_venus: no parameters | |
| [ 0.379340] gdsc_mdss: no parameters | |
| [ 0.379603] gdsc_vfe: no parameters | |
| [ 0.379804] gdsc_oxili_gx: no parameters | |
| [ 0.380010] gdsc_venus_core0: fast normal | |
| [ 0.380625] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at e0320000, with 2 ctx banks | |
| [ 0.381377] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at e0380000, with 22 ctx banks | |
| [ 0.386650] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1 | |
| [ 0.386852] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2 | |
| [ 0.387031] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context MSA0_Audio using bank 2 | |
| [ 0.387216] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3 | |
| [ 0.387407] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4 | |
| [ 0.387596] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5 | |
| [ 0.387788] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7 | |
| [ 0.387980] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8 | |
| [ 0.388169] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9 | |
| [ 0.388351] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18 | |
| [ 0.388536] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19 | |
| [ 0.388728] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20 | |
| [ 0.388910] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21 | |
| [ 0.389096] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22 | |
| [ 0.389295] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23 | |
| [ 0.389498] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24 | |
| [ 0.389691] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25 | |
| [ 0.389891] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26 | |
| [ 0.390122] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27 | |
| [ 0.390322] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28 | |
| [ 0.390511] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29 | |
| [ 0.390698] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context qpic using bank 10 | |
| [ 0.390889] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context wlan using bank 17 | |
| [ 0.391081] msm_iommu_ctx 1e3f000.qcom,iommu-ctx: context periph_CE_secure using bank 31 | |
| [ 0.393850] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.394971] Bluetooth: ddc45ed8 | |
| [ 0.395006] NET: Registered protocol family 31 | |
| [ 0.395012] Bluetooth: ddc45ed8 | |
| [ 0.395022] Bluetooth: ddc45ed0Bluetooth: ddc45ec0 | |
| [ 0.395074] Bluetooth: ddc45ec0[ 0.395350] cfg80211: Calling CRDA to update world regulatory domain | |
| [ 0.395375] cfg80211: World regulatory domain updated: | |
| [ 0.395381] cfg80211: DFS Master region: unset | |
| [ 0.395392] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) | |
| [ 0.395401] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) | |
| [ 0.395409] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) | |
| [ 0.395416] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) | |
| [ 0.395424] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) | |
| [ 0.395431] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) | |
| [ 0.395439] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) | |
| [ 0.395446] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) | |
| [ 0.395454] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) | |
| [ 0.396276] Switched to clocksource arch_sys_counter | |
| [ 0.405825] NET: Registered protocol family 2 | |
| [ 0.406411] TCP established hash table entries: 4096 (order: 2, 16384 bytes) | |
| [ 0.406449] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) | |
| [ 0.406498] TCP: Hash tables configured (established 4096 bind 4096) | |
| [ 0.406530] TCP: reno registered | |
| [ 0.406540] UDP hash table entries: 256 (order: 1, 8192 bytes) | |
| [ 0.406560] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
| [ 0.406702] NET: Registered protocol family 1 | |
| [ 0.407438] Trying to unpack rootfs image as initramfs... | |
| [ 0.738200] Freeing initrd memory: 5820K | |
| [ 0.739656] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available | |
| [ 0.741728] futex hash table entries: 1024 (order: 4, 65536 bytes) | |
| [ 0.742215] vmscan: error setting kswapd cpu affinity mask | |
| [ 0.746682] VFS: Disk quotas dquot_6.5.2 | |
| [ 0.746819] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
| [ 0.749569] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) | |
| [ 0.749584] io scheduler noop registered | |
| [ 0.749594] io scheduler deadline registered | |
| [ 0.749623] io scheduler cfq registered (default) | |
| [ 0.752482] msm_smp2p_init: unable to create log context | |
| [ 0.753497] qmi_log_init: Unable to create QMI IPC logging for Req/Resp | |
| [ 0.753505] logging for Indications: Unable to create QMI IPC qmi_log_init[ 0.753727] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR | |
| [ 0.754138] apr_init: Unable to create ipc log context | |
| [ 0.758774] In memshare_probe, Memshare probe success | |
| [ 0.760915] msm_rpm_log_probe: OK | |
| [ 0.761993] subsys-pil-tz 1de0000.qcom,venus: for venus segments only will be dumped. | |
| [ 0.764036] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id. | |
| [ 0.764883] msm_serial_hsl_probe: detected port #0 (ttyHSL0) | |
| [ 0.764924] AXI: get_pdata(): Error: Client name not found | |
| [ 0.764930] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration | |
| [ 0.764935] msm_serial_hsl_probe: Bus scaling is disabled | |
| [ 0.765039] 78af000.serial: ttyHSL0 at MMIO 0x78af000 (irq = 32, base_baud = 460800) is a MSM | |
| [ 0.765089] msm_hsl_console_setup: console setup on port #0 | |
| [ 2.851252] console [ttyHSL0] enabled | |
| [ 2.855350] msm_serial_hsl_init: driver initialized | |
| [ 2.859733] smd_tty_log_init: Unable to create IPC log | |
| [ 2.868573] diag: Failed to create IPC logging context | |
| [ 2.880739] ------------[ cut here ]------------ | |
| [ 2.884326] WARNING: CPU: 2 PID: 1 at /mnt/devhomes/build/work/83941694d19f355d/kernel/msm-3.18/drivers/gpu/msm/kgsl_pwrctrl.c:2080 kgsl_pwrctrl_clk_set_rate+0x34/0x48() | |
| [ 2.899445] KGSL:rbbmtimer_clk set freq -22 failed:-22 | |
| [ 2.904540] Modules linked in: | |
| [ 2.907583] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 3.18.66-perf #1 | |
| [ 2.914020] [<c010d5d8>] (unwind_backtrace) from [<c010a484>] (show_stack+0x10/0x14) | |
| [ 2.921736] [<c010a484>] (show_stack) from [<c097ae2c>] (dump_stack+0x80/0xa0) | |
| [ 2.928940] [<c097ae2c>] (dump_stack) from [<c011add8>] (warn_slowpath_common+0x64/0x88) | |
| [ 2.937013] [<c011add8>] (warn_slowpath_common) from [<c011ae28>] (warn_slowpath_fmt+0x2c/0x3c) | |
| [ 2.945694] [<c011ae28>] (warn_slowpath_fmt) from [<c03ad860>] (kgsl_pwrctrl_clk_set_rate+0x34/0x48) | |
| [ 2.954809] [<c03ad860>] (kgsl_pwrctrl_clk_set_rate) from [<c03b0954>] (kgsl_pwrctrl_init+0x2c0/0x754) | |
| [ 2.964097] [<c03b0954>] (kgsl_pwrctrl_init) from [<c03a54dc>] (kgsl_device_platform_probe+0xd4/0x5c8) | |
| [ 2.973386] [<c03a54dc>] (kgsl_device_platform_probe) from [<c03d0710>] (adreno_probe+0x400/0x5a8) | |
| [ 2.982326] [<c03d0710>] (adreno_probe) from [<c03dec88>] (platform_drv_probe+0x30/0x7c) | |
| [ 2.990399] [<c03dec88>] (platform_drv_probe) from [<c03dd348>] (driver_probe_device+0x134/0x358) | |
| [ 2.999252] [<c03dd348>] (driver_probe_device) from [<c03dd5d4>] (__driver_attach+0x68/0x8c) | |
| [ 3.007673] [<c03dd5d4>] (__driver_attach) from [<c03db888>] (bus_for_each_dev+0x6c/0x90) | |
| [ 3.015832] [<c03db888>] (bus_for_each_dev) from [<c03dc9a4>] (bus_add_driver+0x110/0x238) | |
| [ 3.024079] [<c03dc9a4>] (bus_add_driver) from [<c03dddc8>] (driver_register+0x9c/0xe0) | |
| [ 3.032066] [<c03dddc8>] (driver_register) from [<c0f1e208>] (kgsl_3d_init+0x20/0x4c) | |
| [ 3.039877] [<c0f1e208>] (kgsl_3d_init) from [<c0100798>] (do_one_initcall+0x1b8/0x1f8) | |
| [ 3.047863] [<c0100798>] (do_one_initcall) from [<c0f00df8>] (kernel_init_freeable+0x118/0x1dc) | |
| [ 3.056545] [<c0f00df8>] (kernel_init_freeable) from [<c09770d8>] (kernel_init+0x8/0x10c) | |
| [ 3.064704] [<c09770d8>] (kernel_init) from [<c0106788>] (ret_from_fork+0x14/0x2c) | |
| [ 3.072330] ---[ end trace 8bc850b877c22f1b ]--- | |
| [ 3.087308] brd: module loaded | |
| [ 3.091997] loop: module loaded | |
| [ 3.094516] zram: Created 1 device(s) ... | |
| [ 3.098581] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000 | |
| [ 3.104391] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE | |
| [ 3.111025] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem | |
| [ 3.118314] QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0 | |
| [ 3.127735] QSEECOM: qseecom_probe: secure app region addr=0x87a00000 size=0x200000 | |
| [ 3.135564] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1 | |
| [ 3.144681] i2c-core: driver [tabla-i2c-core] using legacy suspend method | |
| [ 3.150449] i2c-core: driver [tabla-i2c-core] using legacy resume method | |
| [ 3.157215] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method | |
| [ 3.164053] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method | |
| [ 3.171017] i2c-core: driver [tasha-i2c-core] using legacy suspend method | |
| [ 3.177682] i2c-core: driver [tasha-i2c-core] using legacy resume method | |
| [ 3.184996] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 | |
| [ 3.194161] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000 | |
| [ 3.200083] qce 720000.qcedev: CE device = 0x0 | |
| [ 3.200083] IO base, CE = 0xe0680000 | |
| [ 3.200083] Consumer (IN) PIPE 2, Producer (OUT) PIPE 3 | |
| [ 3.200083] IO base BAM = 0x00000000 | |
| [ 3.200083] BAM IRQ 70 | |
| [ 3.200083] Engines Availability = 0x2010853 | |
| [ 3.223702] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x00704000 | |
| [ 3.231503] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x00704000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x00704000 | |
| [ 3.245999] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x00704000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x00704000 | |
| [ 3.260496] sps:BAM 0x00704000 is registered.[ 3.265155] sps:BAM 0x00704000 (va:0xe06c0000) enabled: ver:0x25, number of pipes:8 | |
| [ 3.272947] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 70 | |
| [ 3.282557] QCE50: __qce_get_device_tree_data: BAM Apps EE is not defined, setting to default 1 | |
| [ 3.291378] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000 | |
| [ 3.297734] qcrypto 720000.qcrypto: CE device = 0x0 | |
| [ 3.297734] IO base, CE = 0xe07c0000 | |
| [ 3.297734] Consumer (IN) PIPE 4, Producer (OUT) PIPE 5 | |
| [ 3.297734] IO base BAM = 0x00000000 | |
| [ 3.297734] BAM IRQ 70 | |
| [ 3.297734] Engines Availability = 0x2010853 | |
| [ 3.322486] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 70 | |
| [ 3.331090] qcrypto 720000.qcrypto: qcrypto-ecb-aes | |
| [ 3.335009] qcrypto 720000.qcrypto: qcrypto-cbc-aes | |
| [ 3.339865] qcrypto 720000.qcrypto: qcrypto-ctr-aes | |
| [ 3.344760] qcrypto 720000.qcrypto: qcrypto-ecb-des | |
| [ 3.349588] qcrypto 720000.qcrypto: qcrypto-cbc-des | |
| [ 3.354479] qcrypto 720000.qcrypto: qcrypto-ecb-3des | |
| [ 3.359397] qcrypto 720000.qcrypto: qcrypto-cbc-3des | |
| [ 3.364366] qcrypto 720000.qcrypto: qcrypto-xts-aes | |
| [ 3.369205] qcrypto 720000.qcrypto: qcrypto-sha1 | |
| [ 3.373829] qcrypto 720000.qcrypto: qcrypto-sha256 | |
| [ 3.378584] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes | |
| [ 3.384765] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des | |
| [ 3.390924] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des | |
| [ 3.397155] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes | |
| [ 3.403516] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des | |
| [ 3.409827] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des | |
| [ 3.416272] qcrypto 720000.qcrypto: qcrypto-hmac-sha1 | |
| [ 3.421309] qcrypto 720000.qcrypto: qcrypto-hmac-sha256 | |
| [ 3.426495] qcrypto 720000.qcrypto: qcrypto-aes-ccm | |
| [ 3.431374] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm | |
| [ 3.437222] SCSI Media Changer driver v0.25 | |
| [ 3.441724] msm_nand_probe: disabling nand as boot device (0) is not NAND | |
| [ 3.453255] sps: BAM device 0x07884000 is not registered yet. | |
| [ 3.457965] sps_register_bam_device : unable to create IPC Logging 0 for bam 0x07884000 | |
| [ 3.465799] sps_register_bam_device : unable to create IPC Logging 1 for bam 0x07884000sps_register_bam_device : unable to create IPC Logging 2 for bam 0x07884000 | |
| [ 3.480269] sps_register_bam_device : unable to create IPC Logging 3 for bam 0x07884000sps_register_bam_device : unable to create IPC Logging 4 for bam 0x07884000 | |
| [ 3.494766] sps:BAM 0x07884000 is registered.[ 3.499836] sps:BAM 0x07884000 (va:0xe0c40000) enabled: ver:0x18, number of pipes:16 | |
| [ 3.513380] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 3.517390] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> | |
| [ 3.524601] wcnss_wlan probed in built-in mode | |
| [ 3.529482] hyp_assign_table: Failed to assign memory protection, ret = -19 | |
| [ 3.530662] msm_sharedmem: sharedmem_register_qmi: qmi init successful | |
| [ 3.541954] msm_sharedmem: setup_shared_ram_perms: hyp_assign_phys failed IPA=0x0160x87c00000 size=917504 err=-19 | |
| [ 3.552360] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs' | |
| [ 3.559794] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp' | |
| [ 3.567537] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm' | |
| [ 3.575538] msm_otg 78d9000.usb: msm_otg probe | |
| [ 3.582918] msm_otg 78d9000.usb: OTG regs = e0198000 | |
| [ 3.589010] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
| [ 3.594589] ehci-msm: Qualcomm On-Chip EHCI Host Controller | |
| [ 3.600817] usbcore: registered new interface driver cdc_acm | |
| [ 3.605692] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters | |
| [ 3.613791] usbcore: registered new interface driver usb-storage | |
| [ 3.619704] usbcore: registered new interface driver ums-alauda | |
| [ 3.625648] usbcore: registered new interface driver ums-cypress | |
| [ 3.631632] usbcore: registered new interface driver ums-datafab | |
| [ 3.637585] usbcore: registered new interface driver ums-freecom | |
| [ 3.643608] usbcore: registered new interface driver ums-isd200 | |
| [ 3.649485] usbcore: registered new interface driver ums-jumpshot | |
| [ 3.655572] usbcore: registered new interface driver ums-karma | |
| [ 3.661387] usbcore: registered new interface driver ums-onetouch | |
| [ 3.667451] usbcore: registered new interface driver ums-sddr09 | |
| [ 3.673366] usbcore: registered new interface driver ums-sddr55 | |
| [ 3.679249] usbcore: registered new interface driver ums-usbat | |
| [ 3.685090] usbcore: registered new interface driver usb_ehset_test | |
| [ 3.692140] gbridge_init: gbridge_init successs. | |
| [ 3.697261] qcom,qpnp-rtc qpnp-rtc-4: rtc core: registered qpnp_rtc as rtc0 | |
| [ 3.703239] msm_otg 78d9000.usb: phy_reset: success | |
| [ 3.703381] i2c /dev entries driver | |
| [ 3.714776] /soc/qcom,cam_smmu/msm_cam_smmu_cb1: could not get #iommu-cells for /soc/qcom,iommu@1e00000 | |
| [ 3.725168] msm_camera_get_dt_vreg_data:1118 number of entries is 0 or not present in dts | |
| [ 3.733406] msm_camera_get_dt_vreg_data:1118 number of entries is 0 or not present in dts | |
| [ 3.741105] msm_camera_get_dt_vreg_data:1118 number of entries is 0 or not present in dts | |
| [ 3.751782] ------------[ cut here ]------------ | |
| [ 3.755367] WARNING: CPU: 2 PID: 1 at /mnt/devhomes/build/work/83941694d19f355d/kernel/msm-3.18/include/linux/of.h:770 msm_camera_get_dt_vreg_data+0x194/0x5a4() | |
| [ 3.769739] Modules linked in: | |
| [ 3.772723] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W 3.18.66-perf #1 | |
| [ 3.780288] [<c010d5d8>] (unwind_backtrace) from [<c010a484>] (show_stack+0x10/0x14) | |
| [ 3.788006] [<c010a484>] (show_stack) from [<c097ae2c>] (dump_stack+0x80/0xa0) | |
| [ 3.795209] [<c097ae2c>] (dump_stack) from [<c011add8>] (warn_slowpath_common+0x64/0x88) | |
| [ 3.803281] [<c011add8>] (warn_slowpath_common) from [<c011ae8c>] (warn_slowpath_null+0x18/0x20) | |
| [ 3.812049] [<c011ae8c>] (warn_slowpath_null) from [<c05a47f4>] (msm_camera_get_dt_vreg_data+0x194/0x5a4) | |
| [ 3.821599] [<c05a47f4>] (msm_camera_get_dt_vreg_data) from [<c05b5b20>] (msm_sensor_driver_parse+0x140/0x534) | |
| [ 3.831580] [<c05b5b20>] (msm_sensor_driver_parse) from [<c05b5f9c>] (msm_sensor_driver_i2c_probe+0x88/0x11c) | |
| [ 3.841473] [<c05b5f9c>] (msm_sensor_driver_i2c_probe) from [<c0543310>] (i2c_device_probe+0xc8/0x100) | |
| [ 3.850765] [<c0543310>] (i2c_device_probe) from [<c03dd348>] (driver_probe_device+0x134/0x358) | |
| [ 3.859445] [<c03dd348>] (driver_probe_device) from [<c03dd5d4>] (__driver_attach+0x68/0x8c) | |
| [ 3.867864] [<c03dd5d4>] (__driver_attach) from [<c03db888>] (bus_for_each_dev+0x6c/0x90) | |
| [ 3.876024] [<c03db888>] (bus_for_each_dev) from [<c03dc9a4>] (bus_add_driver+0x110/0x238) | |
| [ 3.884270] [<c03dc9a4>] (bus_add_driver) from [<c03dddc8>] (driver_register+0x9c/0xe0) | |
| [ 3.892258] [<c03dddc8>] (driver_register) from [<c05417c4>] (i2c_register_driver+0x40/0xd8) | |
| [ 3.900676] [<c05417c4>] (i2c_register_driver) from [<c0f2313c>] (msm_sensor_driver_init+0x54/0x90) | |
| [ 3.909703] [<c0f2313c>] (msm_sensor_driver_init) from [<c0100798>] (do_one_initcall+0x1b8/0x1f8) | |
| [ 3.918559] [<c0100798>] (do_one_initcall) from [<c0f00df8>] (kernel_init_freeable+0x118/0x1dc) | |
| [ 3.927240] [<c0f00df8>] (kernel_init_freeable) from [<c09770d8>] (kernel_init+0x8/0x10c) | |
| [ 3.935400] [<c09770d8>] (kernel_init) from [<c0106788>] (ret_from_fork+0x14/0x2c) | |
| [ 3.942944] ---[ end trace 8bc850b877c22f1c ]--- | |
| [ 3.950238] Failed to disable secure wdog debug: -4 | |
| [ 3.956555] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: [email protected] | |
| [ 3.964290] sdhci: Secure Digital Host Controller Interface driver | |
| [ 3.970132] sdhci: Copyright(c) Pierre Ossman | |
| [ 3.974459] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 3.980879] sdhci_msm 7824900.sdhci: sdhci_msm_probe: ICE device is not enabled | |
| [ 3.987714] sdhci_msm 7824900.sdhci: sdhci_msm_pm_qos_parse: PM QoS voting for cpu group will be disabled | |
| [ 4.000172] sdhci_msm 7824900.sdhci: No vmmc regulator found | |
| [ 4.004791] sdhci_msm 7824900.sdhci: No vqmmc regulator found | |
| [ 4.010887] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA in legacy mode | |
| [ 4.048965] tz_log 8600720.tz-log: Hyp log service is not supported | |
| [ 4.049365] usbcore: registered new interface driver usbhid | |
| [ 4.049367] usbhid: USB HID core driver | |
| [ 4.050098] ashmem: initialized | |
| [ 4.070156] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered. | |
| [ 4.076308] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered. | |
| [ 4.085374] devfreq soc:qcom,cpubw: Couldn't update frequency transition information. | |
| [ 4.092224] mmc0: Out-of-interrupt timeout is 40[ms] | |
| [ 4.097109] mmc0: BKOPS_EN equals 0x0 | |
| [ 4.100772] mmc0: eMMC FW version: 0x02 | |
| [ 4.104597] probe: Version mismatch expected 0x20000 got 0x0 | |
| [ 4.104598] mmc0: cache barrier support 1 flush policy 1 | |
| [ 4.114496] msm-pcm-lpa soc:qcom,msm-pcm-lpa: msm_pcm_probe: dev name soc:qcom,msm-pcm-lpa | |
| [ 4.120490] u32 classifier | |
| [ 4.120492] Actions configured | |
| [ 4.120531] Netfilter messages via NETLINK v0.30. | |
| [ 4.120593] nf_conntrack version 0.5.0 (6831 buckets, 27324 max) | |
| [ 4.121022] ctnetlink v0.93: registering with nfnetlink. | |
| [ 4.121858] xt_time: kernel timezone is -0000 | |
| [ 4.122216] ip_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 4.122382] arp_tables: (C) 2002 David S. Miller | |
| [ 4.122435] TCP: cubic registered | |
| [ 4.122440] Initializing XFRM netlink socket | |
| [ 4.122816] NET: Registered protocol family 10 | |
| [ 4.123827] mip6: Mobile IPv6 | |
| [ 4.123854] ip6_tables: (C) 2000-2006 Netfilter Core Team | |
| [ 4.124015] sit: IPv6 over IPv4 tunneling driver | |
| [ 4.124542] NET: Registered protocol family 17 | |
| [ 4.124625] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. | |
| [ 4.124649] Bridge firewalling registered | |
| [ 4.124656] Ebtables v2.0 registered | |
| [ 4.124859] Bluetooth: ddc45eb0 | |
| [ 4.124877] Bluetooth: ddc45ea8 | |
| [ 4.124890] Bluetooth: ddc45ec0 | |
| [ 4.124892] Bluetooth: ddc45ea0 | |
| [ 4.124900] Bluetooth: ddc45ea0 | |
| [ 4.124906] Bluetooth: ddc45e98 | |
| [ 4.124914] Bluetooth: ddc45ed8 | |
| [ 4.124940] Bluetooth: ddc45ed8 | |
| [ 4.124941] l2tp_core: L2TP core driver, V2.0 | |
| [ 4.124948] l2tp_ip: L2TP IP encapsulation support (L2TPv3) | |
| [ 4.124971] l2tp_netlink: L2TP netlink interface | |
| [ 4.124999] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3) | |
| [ 4.125026] l2tp_debugfs: L2TP debugfs support | |
| [ 4.125033] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3) | |
| [ 4.125663] NET: Registered protocol family 27 | |
| [ 4.127274] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [local_IPCRTR] | |
| [ 4.128579] subsys-pil-tz a21b000.qcom,pronto: for wcnss segments only will be dumped. | |
| [ 4.130023] pil-q6v5-mss 4080000.qcom,mss: Failed to find the pas_id. | |
| [ 4.130524] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped. | |
| [ 4.136096] Registering SWP/SWPB emulation handler | |
| [ 4.136675] registered taskstats version 1 | |
| [ 4.144612] bam_dmux_init : unable to create IPC Logging Context | |
| [ 4.144643] uart_cts_gpio is not available | |
| [ 4.144650] uart_rfr_gpio is not available | |
| [ 4.144783] msm_serial_hs 78b0000.uart: msm_hs_probe: error creating logging context | |
| [ 4.151756] msm_serial_hs 78b0000.uart: msm_hs_probe: error creating tx logging context | |
| [ 4.151761] msm_serial_hs 78b0000.uart: msm_hs_probe: error creating rx logging context | |
| [ 4.151766] msm_serial_hs 78b0000.uart: msm_hs_probe: error creating usr logging context | |
| [ 4.244757] 78b0000.uart: ttyHS0 at MMIO 0x78b0000 (irq = 33, base_baud = 460800) is a MSM HS UART | |
| [ 4.365113] msm_serial_hs module loaded | |
| [ 4.369279] hyp_assign_table: Failed to assign memory protection, ret = -19 | |
| [ 4.375329] fastrpc: probe of soc:qcom,mdsprpc-mem failed with error -1 | |
| [ 4.383978] file system registered | |
| [ 4.386400] mbim_init: initialize 1 instances | |
| [ 4.390837] mbim_init: Initialized 1 ports | |
| [ 4.394228] mmc0: new HS200 MMC card at address 0001 | |
| [ 4.394875] mmcblk0: mmc0:0001 EE4ED4 3.56 GiB | |
| [ 4.394976] mmcblk0rpmb: mmc0:0001 EE4ED4 partition 3 512 KiB | |
| [ 4.410771] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 | |
| [ 4.414018] rndis_qc_init: initialize rndis QC instance | |
| [ 4.414332] Number of LUNs=8 | |
| [ 4.414337] Mass Storage Function, version: 2009/09/11 | |
| [ 4.414342] LUN: removable file: (no medium) | |
| [ 4.414353] Number of LUNs=1 | |
| [ 4.414408] LUN: removable file: (no medium) | |
| [ 4.414410] Number of LUNs=1 | |
| [ 4.414715] android_usb gadget: android_usb ready | |
| [ 4.414723] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16 | |
| [ 4.414736] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_UDC_STARTED_EVENT received | |
| [ 4.422549] qcom,qpnp-rtc qpnp-rtc-4: setting system clock to 1970-01-01 00:00:06 UTC (6) | |
| [ 4.423884] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster | |
| [ 4.423907] calculate_residency: residency < 0 for LPM | |
| [ 4.423910] parse_cpu_levels: idx 1 420 | |
| [ 4.423912] calculate_residency: residency < 0 for LPM | |
| [ 4.423914] parse_cpu_levels: idx 2 500 | |
| [ 4.423917] parse_cpu_levels: idx 2 1373 | |
| [ 4.423923] calculate_residency: residency < 0 for LPM | |
| [ 4.423925] calculate_residency: residency < 0 for LPM | |
| [ 4.521077] qcom,cc-debug-8909 1874000.qcom,cc-debug: Registered Debug Mux successfully | |
| [ 4.530395] msm8952-asoc-wcd 7702000.sound: default codec configured | |
| [ 4.537928] msm8952-asoc-wcd 7702000.sound: ASoC: CODEC DAI cajon_vifeedback not registered | |
| [ 4.545311] msm8952-asoc-wcd 7702000.sound: snd_soc_register_card failed (-517) | |
| [ 4.552945] mem_acc_corner: disabling | |
| [ 4.556224] clock_late_init: Removing enables held for handed-off clocks | |
| [ 4.565064] ALSA device list: | |
| [ 4.567008] No soundcards�[ 4.571146] Freeing unused kernel memory: 308K | |
| [ 4.622804] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received | |
| [ 4.628477] msm_hs_resource_vote:78b0000.uart runtime callback not invoked ret:0 st:1 | |
| [ 4.628478] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_CONNECT_EVENT received | |
| [ 6.647335] irq 72, desc: ddec1300, depth: 0, count: 0, unhandled: 0 | |
| [ 6.652645] ->handle_irq(): c030550c, msm_gpio_irq_handler+0x0/0x118 | |
| [ 6.659068] ->irq_data.chip(): c101f498, gic_chip+0x0/0x74 | |
| [ 6.664538] ->action(): (null) | |
| [ 6.667750] IRQ_NOPROBE set | |
| [ 6.670786] IRQ_NOREQUEST set | |
| [ 6.673826] IRQ_NOTHREAD set | |
| [ 6.676901] msm_serial_hs_rx_work(): RX Buffer Overrun Detected | |
| @rampost.lcd_check 1 4627 | |
| @rampost.spine.open_serial opening serial port /dev/ttyHS0 4627 | |
| @rampost.spine.configure_serial_port configuring port /dev/ttyHS0 (fd=9) 4630 | |
| @rampost.spine.select_timeout No serial data for 1 sec 5641 | |
| @rampost.spine.select_timeout No serial data for 2 sec 6642 | |
| @rampost.dfu.request_version ... 6642 | |
| @rampost.dfu.open_file opening "syscon.dfu" 6700 | |
| @rampost.dfu.installed_version 57733030303030303033343561316300 Ws0000000345a1c* 6700 | |
| @rampost[ 6.762131] EXT4-fs (dm-0): mounted filesystem without journal. Opts: noload | |
| .dfu.desired_version 57733030303030303033343561316300 Ws0000000345a1c* 6700 | |
| @rampost.battery_level 3.760 6700 | |
| @rampost.battery_temperature 36 6700 | |
| @rampost.battery_flags 00000000 6700 | |
| @rampost.rampost.exit 0 6720 | |
| Setting up DM Verity device: system none ro,0 1179648 verity 1 179:22 179:22 4096 4096 147456 147457 sha256 757fb7211ca70c0cd584f51c9ff002cb13b67a29c7c8f1121f4124f371d1d7e7 ab537db38f41ee4789f0ceee247dabe1c3093cd6875e35064a4c5f6b46785f82 | |
| Kernel not configured for semaphores (System V IPC). Not using udev synchronisation code. | |
| [ 7.055796] systemd[1]: Failed to insert module 'autofs4': No such file or directory | |
| [ 7.074974] random: systemd urandom read with 73 bits of entropy available | |
| [ 7.088499] systemd[1]: systemd 225 running in system mode. (-PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT +GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) | |
| [ 7.105937] systemd[1]: Detected architecture arm. | |
| Welcome to msm-user 201904051705! | |
| [ 7.133147] systemd[1]: Set hostname to <Vector>. | |
| [ 7.144369] systemd[1]: Initializing machine ID from random generator. | |
| [ 7.150139] systemd[1]: Installed transient /etc/machine-id file. | |
| [ 7.370292] systemd[1]: [/lib/systemd/system/mdsprpcd.service:11] Failed to parse service restart specifier, ignoring: yes | |
| [ 7.431542] systemd[1]: [email protected]: Cannot add dependency job, ignoring: Unit [email protected] failed to load: No such file or directory. | |
| [ 7.449098] systemd[1]: Started Dispatch Password Requests to Console Directory����&�z-� ] Started Dispatch Password Requests to Console Directory Watch. | |
| [ 7.480380] systemd[1]: Started Forward Password Requests to Wall Directoߵ�5�j� OK ] Started Forward Password Requests to Wall Directory Watch. | |
| [ 7.500199] systemd[1]: Reached target Soo��5�j� OK ] Reached target Sound Card. | |
| [ 7.520425] systemd[1]: Created slice Ro����&�z-� ] Created slice Root Slice. | |
| [ 7.540329] systemd[1]: Listening on /dev/initctl Compatibility Nao��5�j� OK ] Listening on /dev/initctl Compatibility Named Pipe. | |
| [ 7.560287] systemd[1]: Listening on udev Controo��5�j� OK ] Listening on udev Control Socket. | |
| [ 7.580416] systemd[1]: Created slice Systo��5�j� OK ] Created slice System Slice. | |
| [ 7.600505] systemd[1]: Created slice system-get�5�j� OK ] Created slice system-getty.slice. | |
| [ 7.620322] systemd[1]: Listening on Journal Socket (/o��5�j� OK ] Listening on Journal Socket (/dev/log). | |
| [ 7.657960] systemd[1]: Listening on Journal�[ OK ] Listening on Journal Socket. | |
| [ 7.681789] systemd[1]: Starting Journal Ser Starting Journal Service... | |
| [ 7.702273] systemd[1]: Starting Setup Virtual Co��х�ѥ���Setup Virtual Console... | |
| [ 7.722392] systemd[1]: Started irsc-util �[ OK ] Started irsc-util Service. | |
| [ 7.742036] systemd[1]: Started Find-Partitions S�[ OK ] [ 7.746826] systemd-journald[272]: [/etc/systemd/journald.conf:26] Unknown lvalue 'RuntimeMaxFiles' in section 'Journal' | |
| Started Find-Partitions Service. | |
| [ 7.790117] systemd[1]: Starting Apply Kernel Var� Starting Apply Kernel Variables... | |
| [ 7.812189] systemd[1]: Mounting Configuration File Sys�j�չѥ���Configuration File System... | |
| [ 7.842162] systemd[1]: Started Victor Boot A�[ OK ] Started Victor Boot Animator. | |
| [ 7.862564] systemd[1]: Starting Create list of required static device nodes for the current ke� Starting Create list of required st... nodes for the current kernel... | |
| [ 7.890510] systemd[1]: Listening on udev Kernel �[ OK ] Listening on udev Kernel Socket. | |
| [ 7.912559] systemd[1]: Starting Remount Root and Kernel File Sy� Starting Remount Root and Kernel File Systems... | |
| [ 7.932031] EXT4-fs (dm-0): re-mounted. Opts: (null) | |
| [ 7.940289] systemd[1]: Reached tar�[ OK ] Reached target Swap. | |
| [ 7.963885] systemd[1]: Reached target Remote File�[ OK ] Reached target Remote File Systems. | |
| [ 7.993081] systemd[1]: Starting Fake Hardware Clock Early� Starting Fake Hardware Clock Early Boot... | |
| [ 8.021792] systemd[1]: Mounting /sys/fs/p� Mounting /sys/fs/pstore... | |
| [ 8.040994] systemd[1]: Created slice system-syslog\x2dn[ OK ] Created slice system-syslog\x2dng.slice. | |
| [ 8.060312] systemd[1]: Reached targ�[ OK ] Reached target Paths. | |
| [ 8.081005] systemd[1]: Created slice User and Sessi�[ OK ] Created slice User and Session Slice. | |
| [ 8.100492] systemd[1]: Reached target�[ OK ] Reached target Slices. | |
| [ 8.124278] systemd[1]: Mounted Configuration File Sys�[ OK ] Mounted Configuration File System. | |
| [ 8.140384] systemd[1]: Mounted /sys/fs����&�z-� ] Mounted /sys/fs/pstore. | |
| [ 8.160900] systemd[1]: Started Journal�[ OK ] Started Journal Service. | |
| [ OK ] Started Setup Virtual Console. | |
| [ OK ] Started Apply Kernel Variables. | |
| [ OK ] Started Create list of required sta...ce nodes for the current kernel. | |
| [ OK ] Started Remount Root and Kernel File Systems. | |
| [ OK ] Started Fake Hardware Clock Early Boot. | |
| Starting Update UTMP about System Boot/Shutdown... | |
| Starting udev Coldplug all Devices... | |
| Starting Create Static Device Nodes in /dev... | |
| Starting Packet Filtering Framework... | |
| Starting Packet Filtering Framework... | |
| Starting Flush Journal to Persistent Storage... | |
| [ OK ] Started Create Static Device Nodes in /dev. | |
| [ 8.548420] systemd-journald[272]: Received request to flush runtime journal from PID 1 | |
| Starting udev Kernel Device Manager... | |
| [ OK ] Reached target Local File Systems (Pre). | |
| Mounting /var/volatile... | |
| [ OK ] Mounted /var/volatile. | |
| [ OK ] Started Update UTMP about System Boot/Shutdown. | |
| [ OK ] Started Packet Filtering Framework. | |
| [ OK ] Started Packet Filtering Framework. | |
| [ OK ] Started Flush Journal to Persistent Storage. | |
| [ OK ] Started udev Kernel Device Manager. | |
| Starting Bind mount volatile /var/lib... | |
| [ OK ] Started Bind mount volatile /var/lib. | |
| Starting Load/Save Random Seed... | |
| [ OK ] Started Load/Save Random Seed. | |
| [ OK ] Started udev Coldplug all Devices. | |
| [ 10.197077] random: nonblocking pool is initialized | |
| [ OK ] Found device /dev/disk/by-partlabel/modem. | |
| Mounting /firmware... | |
| [ OK ] Mounted /firmware. | |
| [ OK ] Found device /dev/disk/by-partlabel/oem. | |
| Mounting /factory... | |
| [ 10.936572] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: (null) | |
| [ OK ] Reached target Local File Systems. | |
| Starting Create Volatile Files and Directories... | |
| [ OK ] Started Firmwarelinks Service. | |
| [ OK ] Mounted /factory. | |
| [ OK ] Started Create Volatile Files and Directories. | |
| [ OK ] Found device /dev/ion. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Started Save hwclock every 15 minutes. | |
| [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | |
| Starting Restore Sound Card State... | |
| [ OK ] Started Daily rotation of log files. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| [ OK ] Listening on Fault Code socket. | |
| [ OK ] Listening on Fake Hardware Clock socket. | |
| [ OK ] Listening on Anki Crash Log Socket. | |
| [ OK ] Reached target Sockets. | |
| [ OK ] Reached target Basic System. | |
| [ OK ] Started WCNSS platform. | |
| [ OK ] Started set_core_pattern Service. | |
| [ 11.415950] wcnss_wlan triggered by userspace | |
| [ 11.421838] wcnss_pm_qos_add_request: add request | |
| [ 11.425537] wcnss_pm_qos_update_request: update request 100 | |
| [ 11.431232] wcnss_trigger_config: adc get failed | |
| [ 11.435793] wcnss_trigger_config: couldn't get snoc_wcnss | |
| [ 11.441160] wcnss_notif_cb: wcnss notification event: 2 | |
| [ 11.447215] subsys-pil-tz a21b000.qcom,pronto: wcnss: Allocating region at 0x00000000 size 0x700000 | |
| [ 11.455447] subsys-pil-tz a21b000.qcom,pronto: wcnss: loading from 0x8a400000 to 0x8aa38000 | |
| [ 11.463757] wcnss_notif_cb: wcnss notification event: 6 | |
| [ OK ] Started Hardware RNG Entropy Gatherer Daemon. | |
| [ 11.473590] wcnss: IRIS Reg: 91100004 | |
| [ OK ] Started bsp_paths Service. | |
| [ OK ] Started D-Bus System Message Bus. | |
| Starting Init-audio Service... | |
| [ 11.688685] subsys-pil-tz a21b000.qcom,pronto: wcnss: Brought out of reset | |
| [ 11.699090] adsp-loader soc:qcom,msm-adsp-loader: adsp_loader_do: scheduling work to load ADSP fw | |
| [ 11.707654] pil-q6v5-mss 4080000.qcom,mss: modem: Allocating region at 0x00000000 size 0x1f00000 | |
| [ 11.715763] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x88000000 to 0x89f00000 | |
| [ 11.732473] pil-q6v5-mss 4080000.qcom,mss: Debug policy not present - msadp. Continue. | |
| [ 11.740116] pil-q6v5-mss 4080000.qcom,mss: Loading MBA and DP (if present) from 0x9e800000 to 0x9e900000 size 100000 | |
| [ OK ] Started Anki Camera Service. | |
| Starting Login Service... | |
| Starting reboot-daemon service... | |
| [ OK ] Started set_core_pattern Service. | |
| [ OK ] Started Service manager Service. | |
| [ 11.858771] pil-q6v5-mss 4080000.qcom,mss: MBA boot done | |
| [ OK ] Started chgrp-diag Service. | |
| [ OK ] Started mdsprpc Service. | |
| [ OK ] Started Getty on tty1. | |
| [ OK ] Reached target Login Prompts. | |
| Starting System Logger Daemon "default" instance... | |
| [ OK ] Started qti service. | |
| [ OK ] Started Thermal Engine Service. | |
| [ OK ] Started QTI Post Boot Service. | |
| [ 12.042364] subsys-pil-tz a21b000.qcom,pronto: wcnss: Power/Clock ready interrupt received | |
| [ 12.049605] wcnss_notif_cb: wcnss notification event: 7 | |
| [ 12.060952] subsys-pil-tz a21b000.qcom,pronto: Subsystem error monitoring/handling services are up | |
| [ 12.068982] wcnss_notif_cb: wcnss notification event: 3 | |
| [ 12.074332] wcnss_pm_qos_update_request: update request -1 | |
| [ 12.075451] diag: In diag_send_feature_mask_update, control channel is not open, p: 2, c1195cbc | |
| [ 12.077605] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [wcnss_IPCRTR] | |
| [ 12.077605] msm8952-asoc-wcd 7702000.sound: default codec configured | |
| [ 12.080121] msm8952-asoc-wcd 7702000.sound: ASoC: CODEC DAI cajon_vifeedback not registered | |
| [ 12.080162] msm8952-asoc-wcd 7702000.sound: snd_soc_register_card failed (-517) | |
| [ 12.118911] wcnss_pm_qos_remove_request: remove request | |
| Starting logd Service... | |
| [ 12.169636] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of[ OK ] Started Restore Sound Card State. | |
| [ OK ] Started Init-audio Service. | |
| [ OK ] Started reboot-daemon service. | |
| [ 12.219394] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received | |
| [ 12.221997] msm8952-asoc-wcd 7702000.sound: default codec configured | |
| [ 12.225547] IPC_RTR: ipc_router_create_log_ctx: Unable to create IPC logging for [modem_IPCRTR] | |
| [ 12.225547] wcd-spmi-core msm8x16_wcd_codec-8: Error: regulator not found:cdc-vdd-spkdrv | |
| [ 12.233959] 'opened /dev/mdsprpc-smd c 235 2' | |
| [ 12.241060] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL5 --> MultiMedia5 --> TERT_MI2S_RX Audio Mixer | |
| [ 12.241067] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL5 -> MultiMedia5 -> TERT_MI2S_RX Audio Mixer | |
| [ 12.241117] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for MM_DL8 --> MultiMedia8 --> TERT_MI2S_RX Audio Mixer | |
| [ 12.241122] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM_DL8 -> MultiMedia8 -> TERT_MI2S_RX Audio Mixer | |
| [ 12.241711] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for INT_FM_TX --> INTERNAL_FM_TX --> SEC_MI2S_RX Port Mixer | |
| [ 12.241717] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route INT_FM_TX -> INTERNAL_FM_TX -> SEC_MI2S_RX Port Mixer | |
| [ 12.259953] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO_REF_EC_UL3 MUX | |
| [ 12.259960] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO_REF_EC_UL3 MUX -> direct -> MM_UL3 | |
| [ 12.268345] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for SEC_MI2S_TX --> SEC_MI2S_TX --> SLIMBUS_0_RX Port Mixer | |
| [ 12.268352] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC_MI2S_TX -> SEC_MI2S_TX -> SLIMBUS_0_RX Port Mixer | |
| [ 12.269478] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer | |
| [ 12.269484] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer | |
| [ 12.271568] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY_MI2S_TX | |
| [ 12.271574] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE_IN -> direct -> SENARY_MI2S_TX | |
| [ 12.306217] msm_thermal:set_enabled enabled = 0 | |
| [ 12.403200] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to create SEC_MI2S_RX Port Mixer debugfs file | |
| [ 12.428518] M-Notify: General: 7 | |
| [ 12.428982] msm-pcm-routing soc:qcom,W��� ASoC: mux SLIM_0_RX AANC MUX has no paths | |
| [ 12.434506] wcd-spmi-core msm8x16_wcd_codec-8: ASoC: mux RX3 MIX1 INP3 has no paths | |
| [ 12.434893] wcd-spmi-core msm8x16_wcd_codec-8: ASoC: mux RX2 MIX1 INP3 has no paths | |
| [ OK ] Found device /dev/qseecom. | |
| [ 12.481799] logd.auditd: start | |
| [ 12.483866] logd.klogd: 12483805723 | |
| [ 12.542629] USB QCMAP NL IOCTL Snd GETNEIGH Succ | |
| [ OK ] Started Login Service. | |
| Starting mount-data... | |
| [ 12.637258] wlan: loading driver v3.0.11.85 | |
| Starting Anki ALSA init... | |
| [ 12.689010] anki-audio-init: START | |
| [ 12.911156] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time | |
| [ 12.926537] QSEECOM: qseecom_load_app: App with id 2 (keymaste) now loaded | |
| [ OK ] Started System Logger Daemon "default" instance. | |
| [ 13.215324] wcnss_wlan_ctrl_probe: SMD ctrl channel up | |
| [ 13.219905] wcnss: version 01050102 | |
| [ 13.223297] wcnss: schedule dnld work for pronto | |
| [ 13.227588] wcnss: build version�[ OK ] Started logd Service. | |
| [ 15.525875] EXT4-fs (dm-1): recovery complete | |
| [ 15.531499] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) | |
| [ OK ] Started mount-data. | |
| Starting usb Service... | |
| [ OK ] Started BT Property Service. | |
| [ 15.780259] wcnss: NV download | |
| [ 15.789107] wcnss: NV bin size: 31719, total_fragments: 11 | |
| [ 15.794441] wcnss: no space available for smd frame | |
| Starting Connection service... | |
| [ 15.820270] wcnss: no space available for smd frame | |
| Starting debuggerd Service... | |
| [ 15.850346] wcnss: no space available for smd frame | |
| Starting Setup /etc/localtime link... | |
| [ 15.880141] wcnss: no space available for s�[ OK ] Started leprop Service. | |
| Starting Anki Post Boot Service... | |
| [ OK ] Started persist-prop service. | |
| [ 15.944089] unregister_client_adhoc: Null cl handle passed unregister | |
| [ 15.9�ster_client_adhoc: Null cl handle passed unregister | |
| Starting Fake Hardware Clock...[ 15.956830] rpm-smd-debug: rsc_ops_write(): RPM message sent succesfully | |
| [ OK ] Started debuggerd Service. | |
| [ OK ] Started Setup /etc/localtime link. | |
| [ 16.093621] wcnss: not setting up vbatt | |
| [ 16.130692] Switching to composition number 0x9091 | |
| [ OK ] Started usb Service. | |
| [ OK ] Started Remote Storage Service. | |
| [ OK ] Started qti system daemon Service. | |
| [ 16.298350] rmt_storage:INFO:main: Done with init now waiting for messages! | |
| [ 16.305055] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fs1! | |
| [ 16.318154] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fs2! | |
| [ OK ] Started Connection service. | |
| [ 16.335911] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fsg! | |
| [ 16.347285] rmt_storage:INFO:rmt_storage_open_cb: Processing: Open Request for /boot/modem_fsc! | |
| [ 16.359160] rmt_storage:INFO:rmt_storage_alloc_buff_cb: Received req_size: 0! avail: 917504 | |
| [ 16.367264] enable_store: android_usb: already disabled | |
| [ 16.367787] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /boot/modem_fs1 | |
| [ 16.368140] rmt_storage:INFO:rmt_storage_client_thread: Calling Read [offset=512, size=512]for /boot/modem_fs1! | |
| [ 16.404114] rmt_storage:INFO:rmt_storage_client_thread: Done Read (bytes = 512) for /boot/modem_fs1! | |
| [ 16.414112] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /boot/modem_fs2 | |
| [ 16.423559] rmt_storage:INFO:rmt_storage_client_thread: Calling Read [offset=512, size=512]for /boot/modem_fs[ OK ] Started Fake Hardware Clock. | |
| [ 16.435042] rmt_storage:INFO:rmt_storage_client_thread: Done Read (bytes = 512) for /boot/modem_fs2! | |
| [ 16.448106] rmt_storage:INFO:rmt_storage_rw_iovec_cb: Read iovec request received for /boot/modem_fs2 | |
| [ 16.457380] rmt_storage:INFO:rmt_storage_client_thread: Calling Read [offset=1024, size=916480]for /boot/modem_fs2! | |
| [ 16.524717] rmt_storage:INFO:rmt_storage_client_thread: Done Read (bytes = 916480) for /boot/modem_fs2! | |
| Starting WPA supplicant... | |
| [ OK ] Reached target System Time Synchronized. | |
| [ OK ] Started Check for an OS update every hour. | |
| [ 16.594570] diag: In diag_send_feature_mask_update, control channel is not open, p: 0, c1195c0c | |
| [ 16.609655] apr_tal:Modem Is Up | |
| Starting Save hwclock by timer... | |
| [ 16.634340] hyp_assign_table: Failed to assign memory protection, ret = -19 | |
| [ OK ] Started Reboot the robot every day between 1AM and 5AM. | |
| [ 16.653445] memshare: hyp_assign_phys failed size=2097152 err=-19 | |
| [ OK ] Reached target Timers. | |
| Starting NTP client/server... | |
| Starting Wait for network to be configured by ConnMan... | |
| [ 16.731658] pstore: Registered ramoops as persistent store backend | |
| [ 16.736847] ramoops: attached 0x100000@0x9ff00000, ecc: 0/0 | |
| [ 16.830204] VicOS Version: 1.6.0.3331 | |
| [ OK ] Started Anki Post Boot Service. | |
| [ OK ] Started NTP client/server. | |
| [ OK ] Started WPA supplicant. | |
| [ OK ] Started Save hwclock by timer. | |
| [ 17.076331] input: msm8909-pm8916-snd-card Headset Jack as /devices/soc/7702000.sound/sound/card0/input1 | |
| [ 17.085903] input: msm8909-pm8916-snd-card Button Jack as /devices/soc/7702000.sound/sound/card0/inp[ OK ] Reached target Network. | |
| Starting Hostname Service... | |
| [ OK ] Started MM Camera Daemon Service. | |
| [ OK ] Started Avahi mDNS/DNS-SD Stack. | |
| [ OK ] Started Anki Bluetooth Daemon. | |
| Starting Marks boot as successful... | |
| [ OK ] Started Hostname Service. | |
| [ OK ] Started Marks boot as successful. | |
| [ OK ] Reached target Multi-User System. | |
| Starting Update UTMP about System Runlevel Changes... | |
| [ 17.735577] msm_pm_qos_add_request: add reque�[ OK ] Started Anki ALSA init. | |
| [ 17.746437] Generating power_down_setting[ 17.793610] i2c-msm-v2 78ba000.i2c: msm_bus_scale_register_client(mstr-id:86):0xe (ok) | |
| [ OK ] [ 17.811055] wcnss_get_serial_number: Device serial number: 401952986 | |
| Started Update UTMP about System Runlevel Changes. | |
| [ 17.866687] ov8856_f8v05a probe succeeded | |
| [ 17.866689] msm_csid_init: CSID_VERSION = 0x30010000 | |
| [ 17.875453] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800 | |
| Starting Victor init service... | |
| [ 17.915280] wlan: WCNSS WLAN version 1.5.1.2 | |
| [ 17.918537] wlan: WCNSS software version 00031 | |
| [ 17.926087] wlan: WCNSS hardware version WCN v2.0 RadioPhy vUnknown with 19.2MHz XO | |
| [ 17.932952] DefaultCountry is 00 | |
| [ 17.966551] wlan_logging_sock_activate_svc: Initalizing FEConsoleLog = 1 NumBuff = 32 | |
| [ 17.970707] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready | |
| [ 17.979710] wlan_logging_sock_activate_svc: Initalizing Pkt stats pkt_stats_buff = 16 | |
| [ 17.988359] wlan: driver loaded | |
| [ 18.181988] cfg80211: Calling CRDA for country: US | |
| [ OK ] Started Victor init service. | |
| Starting Victor crash uploader daemon... | |
| [ 18.480564] cfg80211: Regulatory domain changed to country: US | |
| [ 18.486319] cfg80211: DFS Master region: FCC | |
| [ 18.489864] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) | |
| [ 18.500687] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (8.508093] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 3000 mBm), (N/A) | |
| [ OK [ 18.517359] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s) | |
| ] Started Victor crash uploader daemon. | |
| [ 18.527889] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s) | |
| [ 18.539427] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) | |
| [ 18.547248] cfg80211: (5842000 KHz - 5863000 KHz @ 5000 KHz), (N/A, 3000 mBm), (N/A) | |
| [ 18.554892] cfg80211: (5850000 KHz - 5870000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) | |
| [ 18.562967] cfg80211: (5860000 KHz - 5880000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) | |
| [ 18.570889] cfg80211: (5865000 KHz - 5885000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A) | |
| [ 18.578591] cfg80211: (5870000 KHz - 5890000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) | |
| [ 18.586795] cfg80211: (5880000 KHz - 5900000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) | |
| [ 18.594814] cfg80211: (5890000 KHz - 5910000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) | |
| [ 18.602713] cfg80211: (5895000 KHz - 5915000 KHz @ 20000 KHz), (N/A, 3000 mBm), (N/A) | |
| [ 18.610761] cfg80211: (5900000 KHz - 5920000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) | |
| [ 18.618525] cfg80211: (5910000 KHz - 5930000 KHz @ 10000 KHz), (N/A, 3000 mBm), (N/A) | |
| [ 18.626822] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) | |
| [ OK ] Started Victor DAS Manager. | |
| Starting Victor robot daemon... | |
| [ OK ] Started Victor robot daemon. | |
| [ 18.937306] irq 72, desc: ddec1300, depth: 0, count: 0, unhandled: 0 | |
| [ 18.942648] ->handle_irq(): c030550c, msm_gpio_irq_handler+0x0/0x118 | |
| [ 18.949060] ->irq_data.chip(): c101f498, gic_chip+0x0/0x74 | |
| [ 18.954528] ->action(): (null) | |
| [ 18.957739] IRQ_NOPROBE set | |
| [ 18.960777] IRQ_NOREQUEST set | |
| [ 18.963815] IRQ_NOTHREAD set | |
| [ 18.967096] msm_serial_hs_rx_work(): RX Buffer Overrun Detected | |
| [ 18.972819] msm_serial_hs_rx_work(): RX Buffer Overrun Detected | |
| [ 18.978696] msm_serial_hs_rx_work(): RX Buffer Overrun Detected | |
| [ 18.984594] msm_serial_hs_rx_work(): RX Buffer Overrun Detected | |
| Starting Victor animator daemon... | |
| Stopping Victor Boot Animator... | |
| [ OK ] Stopped Victor Boot Animator. | |
| [ OK ] Started Victor animator daemon. | |
| [ 19.321560] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready | |
| Starting Victor engine daemon... | |
| [ 19.916305] ------------[ cut here ]------------ | |
| [ 19.920351] WARNING: CPU: 0 PID: 1825 at /mnt/devhomes/build/work/83941694d19f355d/kernel/msm-3.18/net/core/dev.c:3430 netif_rx_internal+0x8c/0x1ac() | |
| [ 19.933790] Cloned packet from dev wlan0 | |
| [ 19.937496] Modules linked in: ramoops wlan(O) | |
| [ 19.941633] CPU: 0 PID: 1825 Comm: avahi-daemon Tainted: G W O 3.18.66-perf #1 | |
| [ 19.949746] [<c010d5d8>] (unwind_backtrace) from [<c010a484>] (show_stack+0x10/0x14) | |
| [ 19.957434] [<c010a484>] (show_stack) from [<c097ae2c>] (dump_stack+0x80/0xa0) | |
| [ 19.964639] [<c097ae2c>] (dump_stack) from [<c011add8>] (warn_slowpath_common+0x64/0x88) | |
| [ 19.972729] [<c011add8>] (warn_slowpath_common) from [<c011ae28>] (warn_slowpath_fmt+0x2c/0x3c) | |
| [ 19.981420] [<c011ae28>] (warn_slowpath_fmt) from [<c07d6758>] (netif_rx_internal+0x8c/0x1ac) | |
| [ 19.989895] [<c07d6758>] (netif_rx_internal) from [<c07d7570>] (netif_rx_ni+0x20/0x84) | |
| [ 19.997790] [<c07d7570>] (netif_rx_ni) from [<c07d768c>] (dev_loopback_xmit+0xb8/0xc4) | |
| [ 20.005692] [<c07d768c>] (dev_loopback_xmit) from [<c0845624>] (ip_mc_output+0xf0/0x23c) | |
| [ 20.013792] [<c0845624>] (ip_mc_output) from [<c08461f0>] (ip_send_skb+0x10/0x98) | |
| [ 20.021234] [<c08461f0>] (ip_send_skb) from [<c086803c>] (udp_send_skb+0x198/0x264) | |
| [ 20.028887] [<c086803c>] (udp_send_skb) from [<c08695dc>] (udp_sendmsg+0x50c/0x71c) | |
| [ 20.036509] [<c08695dc>] (udp_sendmsg) from [<c07c2f30>] (sock_sendmsg+0x88/0xa4) | |
| [ 20.043994] [<c07c2f30>] (sock_sendmsg) from [<c07c41d8>] (___sys_sendmsg.part.5+0x1b8/0x258) | |
| [ 20.052481] [<c07c41d8>] (___sys_sendmsg.part.5) from [<c07c5324>] (__sys_sendmsg+0x4c/0x70) | |
| [ 20.060903] [<c07c5324>] (__sys_sendmsg) from [<c01066c0>] (ret_fast_syscall+0x0/0x50) | |
| [ 20.069132] msm_serial_hs_rx_work(): RX Buffer Overrun Detected | |
| [ 20.075218] ---[ end trace 8bc850b877c22f1e ]--- | |
| [ OK ] Started Wait for network to be configured by ConnMan. | |
| [ OK ] Started Victor engine daemon. | |
| [ OK ] Started Victor cloud services daemon. | |
| [ OK ] Started Victor Log Uploader. | |
| Starting Victor switchboard daemon... | |
| [ OK ] Reached target Network is Online. | |
| Starting Use update-engine to do an OTA right after we get Internet... | |
| [ OK ] Started Victor switchboard daemon. | |
| Starting Victor OS Update Engine... | |
| Starting Generate x509 cert for vic-gateway... | |
| [ OK ] Started Generate x509 cert for vic-gateway. | |
| [ OK ] Started Victor OS Update Engine. | |
| [ OK ] Started Use update-engine to do an OTA right after we get Internet. | |
| [ OK ] Started Victor gateway daemon. | |
| [ OK ] Reached target Anki Robotics System. | |
| [ 28.113928] msm_pm_qos_update_request: update request 100 | |
| [ 28.138072] msm_csid_init: CSID_VERSION = 0x30010000 | |
| [ 28.145339] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800 | |
| [ 28.152757] ------------[ cut here ]------------ | |
| [ 28.156416] WARNING: CPU: 0 PID: 2200 at /mnt/devhomes/build/work/83941694d19f355d/kernel/msm-3.18/drivers/clk/msm/clock-local2.c:233 rcg_clk_enable+0x34/0x98() | |
| [ 28.170730] Attempting to prepare csi1_clk_src before setting its rate. Set the rate first! | |
| [ 28.179035] Modules linked in: ramoops wlan(O) | |
| [ 28.183469] CPU: 0 PID: 2200 Comm: mct_pipe_start Tainted: G W O 3.18.66-perf #1 | |
| [ 28.191748] [<c010d5d8>] (unwind_backtrace) from [<c010a484>] (show_stack+0x10/0x14) | |
| [ 28.199450] [<c010a484>] (show_stack) from [<c097ae2c>] (dump_stack+0x80/0xa0) | |
| [ 28.206653] [<c097ae2c>] (dump_stack) from [<c011add8>] (warn_slowpath_common+0x64/0x88) | |
| [ 28.214729] [<c011add8>] (warn_slowpath_common) from [<c011ae28>] (warn_slowpath_fmt+0x2c/0x3c) | |
| [ 28.223406] [<c011ae28>] (warn_slowpath_fmt) from [<c06d0544>] (rcg_clk_enable+0x34/0x98) | |
| [ 28.231567] [<c06d0544>] (rcg_clk_enable) from [<c06cd63c>] (clk_enable+0xb4/0xf0) | |
| [ 28.239115] [<c06cd63c>] (clk_enable) from [<c06cd60c>] (clk_enable+0x84/0xf0) | |
| [ 28.246321] [<c06cd60c>] (clk_enable) from [<c059a3bc>] (msm_camera_clk_enable+0x110/0x25c) | |
| [ 28.254661] [<c059a3bc>] (msm_camera_clk_enable) from [<c05a7fe8>] (msm_csiphy_subdev_ioctl+0x2a8/0x1274) | |
| [ 28.264207] [<c05a7fe8>] (msm_csiphy_subdev_ioctl) from [<c0555e54>] (subdev_do_ioctl+0x834/0xb98) | |
| [ 28.273148] [<c0555e54>] (subdev_do_ioctl) from [<c054d8f8>] (video_usercopy+0x228/0x4a4) | |
| [ 28.281304] [<c054d8f8>] (video_usercopy) from [<c05490e4>] (v4l2_ioctl+0x60/0x124) | |
| [ 28.288943] [<c05490e4>] (v4l2_ioctl) from [<c01ded7c>] (do_vfs_ioctl+0x54c/0x67c) | |
| [ 28.296492] [<c01ded7c>] (do_vfs_ioctl) from [<c01deef8>] (SyS_ioctl+0x4c/0x74) | |
| [ 28.303786] [<c01deef8>] (SyS_ioctl) from [<c01066c0>] (ret_fast_syscall+0x0/0x50) | |
| [ 28.311323] ---[ end trace 8bc850b877c22f1f ]--- | |
| [ 28.316341] msm_serial_hs_rx_work(): RX Buffer Overrun Detected | |
| [ 28.470008] afe_get_cal_topology_id: [AFE_TOPOLOGY_CAL] not initialized for this port 4096 | |
| [ 28.477687] send_afe_cal_type cal_block not found!! | |
| [ 28.489166] q6asm_send_cal: cal_block is NULL | |
| [ 28.504267] msm_camera_request_gpio_table:757 gpio 94:CAM_STANDBY request fails | |
| [ 28.642449] msm_pm_qos_update_request: update request -1 | |
| [ 28.804572] msm_csid_irq CSID0_IRQ_STATUS_ADDR = 0x800 | |
| [ 28.868419] csi2_src_clk get failed | |
| [ 47.399902] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0 | |
| [ 47.439482] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister sit0 | |
| [ 47.451804] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo | |
| [ 47.469510] [RMNET:HI] rmnet_config_notify_cb(): Kernel is trying to unregister lo | |
| [ 85.784879] msm_isp_process_irq:VFE0 irq_status0 & 1 are both 0% |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Hey brimston3,
I have 2 Vectors, on one of them motherboard is dead but looks like secondary boards with battery is still working.
I was able to connect mainboard from one to another and it worked fine.
As it's impossible to find parts/repair motherboard I want to replace it with ESP32Cam and drive Vector using it.
I'm relatively new to hardware but I have big programming experience. I have connected to rx/tx/gnd that goes from head to bottom and was able to see some garbage in serial monitor.
How did you get this log? Did I think I saw some rx/tx on motherboard it self, did you use that one?
Thanks
Ihor