Skip to content

Instantly share code, notes, and snippets.

@aganov

aganov/marlin.patch

Last active January 4, 2024 13:02
Show Gist options
  • Save aganov/bc7525e65c0c4834c8f863d9bce90903 to your computer and use it in GitHub Desktop.
Save aganov/bc7525e65c0c4834c8f863d9bce90903 to your computer and use it in GitHub Desktop.
Download ZIP
Ender 3 Marlin Config (SKR 1.3, CR-Touch)
Raw
marlin.patch
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 9acdc107ca..2a53d61ff9 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -61,14 +61,14 @@
// @section info
// Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(Alex)" // Who made the changes.
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
// @section machine
// Choose the name from boards.h that matches your setup
#ifndef MOTHERBOARD
- #define MOTHERBOARD BOARD_RAMPS_14_EFB
+ #define MOTHERBOARD BOARD_BTT_SKR_V1_3
#endif
/**
@@ -79,7 +79,7 @@
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
-#define SERIAL_PORT 0
+#define SERIAL_PORT -1
/**
* Serial Port Baud Rate
@@ -92,7 +92,7 @@
*
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
*/
-#define BAUDRATE 250000
+#define BAUDRATE 115200
//#define BAUD_RATE_GCODE // Enable G-code M575 to set the baud rate
@@ -101,7 +101,7 @@
* Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
-//#define SERIAL_PORT_2 -1
+#define SERIAL_PORT_2 0
//#define BAUDRATE_2 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
/**
@@ -112,11 +112,20 @@
//#define SERIAL_PORT_3 1
//#define BAUDRATE_3 250000 // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
+/**
+ * Select a serial port to communicate with RS485 protocol
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
+//#define RS485_SERIAL_PORT 1
+#ifdef RS485_SERIAL_PORT
+ //#define RS485_BUS_BUFFER_SIZE 128
+#endif
+
// Enable the Bluetooth serial interface on AT90USB devices
//#define BLUETOOTH
// Name displayed in the LCD "Ready" message and Info menu
-//#define CUSTOM_MACHINE_NAME "3D Printer"
+#define CUSTOM_MACHINE_NAME "Ender 3"
// Printer's unique ID, used by some programs to differentiate between machines.
// Choose your own or use a service like https://www.uuidgenerator.net/version4
@@ -139,9 +148,9 @@
* TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
* :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
*/
-#define X_DRIVER_TYPE A4988
-#define Y_DRIVER_TYPE A4988
-#define Z_DRIVER_TYPE A4988
+#define X_DRIVER_TYPE TMC2208
+#define Y_DRIVER_TYPE TMC2208
+#define Z_DRIVER_TYPE TMC2208
//#define X2_DRIVER_TYPE A4988
//#define Y2_DRIVER_TYPE A4988
//#define Z2_DRIVER_TYPE A4988
@@ -153,7 +162,7 @@
//#define U_DRIVER_TYPE A4988
//#define V_DRIVER_TYPE A4988
//#define W_DRIVER_TYPE A4988
-#define E0_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE TMC2208
//#define E1_DRIVER_TYPE A4988
//#define E2_DRIVER_TYPE A4988
//#define E3_DRIVER_TYPE A4988
@@ -636,7 +645,7 @@
#define HEATER_5_MAXTEMP 275
#define HEATER_6_MAXTEMP 275
#define HEATER_7_MAXTEMP 275
-#define BED_MAXTEMP 150
+#define BED_MAXTEMP 125
#define CHAMBER_MAXTEMP 60
/**
@@ -673,16 +682,17 @@
//#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
// Set/get with G-code: M301 E[extruder number, 0-2]
+ // Creality Ender-3
#if ENABLED(PID_PARAMS_PER_HOTEND)
// Specify up to one value per hotend here, according to your setup.
// If there are fewer values, the last one applies to the remaining hotends.
- #define DEFAULT_Kp_LIST { 22.20, 22.20 }
- #define DEFAULT_Ki_LIST { 1.08, 1.08 }
- #define DEFAULT_Kd_LIST { 114.00, 114.00 }
+ #define DEFAULT_Kp_LIST { 21.73, 21.73 }
+ #define DEFAULT_Ki_LIST { 1.54, 1.54 }
+ #define DEFAULT_Kd_LIST { 76.55, 76.55 }
#else
- #define DEFAULT_Kp 22.20
- #define DEFAULT_Ki 1.08
- #define DEFAULT_Kd 114.00
+ #define DEFAULT_Kp 21.73
+ #define DEFAULT_Ki 1.54
+ #define DEFAULT_Kd 76.55
#endif
#else
#define BANG_MAX 255 // Limit hotend current while in bang-bang mode; 255=full current
@@ -833,8 +843,8 @@
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
- //#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
- //#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
+ #define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
+ #define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
#endif
// @section safety
@@ -1136,7 +1146,7 @@
//#define ENDSTOPPULLUP_UMAX
//#define ENDSTOPPULLUP_VMAX
//#define ENDSTOPPULLUP_WMAX
- //#define ENDSTOPPULLUP_ZMIN_PROBE
+ #define ENDSTOPPULLUP_ZMIN_PROBE
#endif
// Enable pulldown for all endstops to prevent a floating state
@@ -1234,14 +1244,14 @@
* Override with M92
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
*/
-#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 500 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 }
/**
* Default Max Feed Rate (linear=mm/s, rotational=°/s)
* Override with M203
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
*/
-#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
+#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 }
//#define LIMITED_MAX_FR_EDITING // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
#if ENABLED(LIMITED_MAX_FR_EDITING)
@@ -1254,7 +1264,7 @@
* Override with M201
* X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
*/
-#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
+#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 }
//#define LIMITED_MAX_ACCEL_EDITING // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
#if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -1269,9 +1279,9 @@
* M204 R Retract Acceleration
* M204 T Travel Acceleration
*/
-#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
-#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_ACCELERATION 500 // X, Y, Z ... and E acceleration for printing moves
+#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
+#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z ... acceleration for travel (non printing) moves
/**
* Default Jerk limits (mm/s)
@@ -1311,7 +1321,7 @@
* https://blog.kyneticcnc.com/2018/10/computing-junction-deviation-for-marlin.html
*/
#if DISABLED(CLASSIC_JERK)
- #define JUNCTION_DEVIATION_MM 0.013 // (mm) Distance from real junction edge
+ #define JUNCTION_DEVIATION_MM 0.08 // (mm) Distance from real junction edge
#define JD_HANDLE_SMALL_SEGMENTS // Use curvature estimation instead of just the junction angle
// for small segments (< 1mm) with large junction angles (> 135°).
#endif
@@ -1400,7 +1410,7 @@
/**
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
*/
-//#define BLTOUCH
+#define BLTOUCH
/**
* MagLev V4 probe by MDD
@@ -1564,7 +1574,7 @@
* | [-] |
* O-- FRONT --+
*/
-#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
+#define NOZZLE_TO_PROBE_OFFSET { -46.5, -6, 0 }
// Enable and set to use a specific tool for probing. Disable to allow any tool.
#define PROBING_TOOL 0
@@ -1574,7 +1584,7 @@
// Most probes should stay away from the edges of the bed, but
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
-#define PROBING_MARGIN 10
+#define PROBING_MARGIN 30
// X and Y axis travel speed (mm/min) between probes
#define XY_PROBE_FEEDRATE (133*60)
@@ -1727,12 +1737,12 @@
// @section extruder
//#define DISABLE_E // Disable the extruder when not stepping
-#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
+//#define DISABLE_OTHER_EXTRUDERS // Keep only the active extruder enabled
// @section motion
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
-#define INVERT_X_DIR false
+#define INVERT_X_DIR true
#define INVERT_Y_DIR true
#define INVERT_Z_DIR false
//#define INVERT_I_DIR false
@@ -1745,7 +1755,7 @@
// @section extruder
// For direct drive extruder v9 set to true, for geared extruder set to false.
-#define INVERT_E0_DIR false
+#define INVERT_E0_DIR true
#define INVERT_E1_DIR false
#define INVERT_E2_DIR false
#define INVERT_E3_DIR false
@@ -1804,8 +1814,8 @@
// @section geometry
// The size of the printable area
-#define X_BED_SIZE 200
-#define Y_BED_SIZE 200
+#define X_BED_SIZE 235
+#define Y_BED_SIZE 235
// Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
#define X_MIN_POS 0
@@ -1813,7 +1823,7 @@
#define Z_MIN_POS 0
#define X_MAX_POS X_BED_SIZE
#define Y_MAX_POS Y_BED_SIZE
-#define Z_MAX_POS 200
+#define Z_MAX_POS 250
//#define I_MIN_POS 0
//#define I_MAX_POS 50
//#define J_MIN_POS 0
@@ -1841,7 +1851,7 @@
#if ENABLED(MIN_SOFTWARE_ENDSTOPS)
#define MIN_SOFTWARE_ENDSTOP_X
#define MIN_SOFTWARE_ENDSTOP_Y
- #define MIN_SOFTWARE_ENDSTOP_Z
+ //#define MIN_SOFTWARE_ENDSTOP_Z
#define MIN_SOFTWARE_ENDSTOP_I
#define MIN_SOFTWARE_ENDSTOP_J
#define MIN_SOFTWARE_ENDSTOP_K
@@ -2024,7 +2034,7 @@
*/
//#define AUTO_BED_LEVELING_3POINT
//#define AUTO_BED_LEVELING_LINEAR
-//#define AUTO_BED_LEVELING_BILINEAR
+#define AUTO_BED_LEVELING_BILINEAR
//#define AUTO_BED_LEVELING_UBL
//#define MESH_BED_LEVELING
@@ -2254,7 +2264,7 @@
* - Allows Z homing only when XY positions are known and trusted.
* - If stepper drivers sleep, XY homing may be required again before Z homing.
*/
-//#define Z_SAFE_HOMING
+#define Z_SAFE_HOMING
#if ENABLED(Z_SAFE_HOMING)
#define Z_SAFE_HOMING_X_POINT X_CENTER // (mm) X point for Z homing
@@ -2263,7 +2273,7 @@
#endif
// Homing speeds (linear=mm/min, rotational=°/min)
-#define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }
+#define HOMING_FEEDRATE_MM_M { (20*60), (20*60), (4*60) }
// Validate that endstops are triggered on homing moves
#define VALIDATE_HOMING_ENDSTOPS
@@ -2341,7 +2351,7 @@
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
*/
-//#define EEPROM_SETTINGS // Persistent storage with M500 and M501
+#define EEPROM_SETTINGS // Persistent storage with M500 and M501
//#define DISABLE_M503 // Saves ~2700 bytes of flash. Disable for release!
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save flash.
#define EEPROM_BOOT_SILENT // Keep M503 quiet and only give errors during first load
@@ -2380,16 +2390,16 @@
// Preheat Constants - Up to 10 are supported without changes
//
#define PREHEAT_1_LABEL "PLA"
-#define PREHEAT_1_TEMP_HOTEND 180
-#define PREHEAT_1_TEMP_BED 70
+#define PREHEAT_1_TEMP_HOTEND 210
+#define PREHEAT_1_TEMP_BED 50
#define PREHEAT_1_TEMP_CHAMBER 35
-#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
+#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255
#define PREHEAT_2_LABEL "ABS"
#define PREHEAT_2_TEMP_HOTEND 240
-#define PREHEAT_2_TEMP_BED 110
+#define PREHEAT_2_TEMP_BED 70
#define PREHEAT_2_TEMP_CHAMBER 35
-#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
+#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255
// @section motion
@@ -2404,7 +2414,7 @@
* P1 Raise the nozzle always to Z-park height.
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
*/
-//#define NOZZLE_PARK_FEATURE
+#define NOZZLE_PARK_FEATURE
#if ENABLED(NOZZLE_PARK_FEATURE)
// Specify a park position as { X, Y, Z_raise }
@@ -2616,7 +2626,7 @@
*
* :['JAPANESE', 'WESTERN', 'CYRILLIC']
*/
-#define DISPLAY_CHARSET_HD44780 JAPANESE
+#define DISPLAY_CHARSET_HD44780 WESTERN
/**
* Info Screen Style (0:Classic, 1:Průša)
@@ -2631,7 +2641,7 @@
* SD Card support is disabled by default. If your controller has an SD slot,
* you must uncomment the following option or it won't work.
*/
-//#define SDSUPPORT
+#define SDSUPPORT
/**
* SD CARD: ENABLE CRC
@@ -3026,7 +3036,7 @@
//
// Connect to EXP1 on RAMPS and compatible boards.
//
-//#define CR10_STOCKDISPLAY
+#define CR10_STOCKDISPLAY
//
// Ender-2 OEM display, a variant of the MKS_MINI_12864
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 10316ac928..ceeb8a04c5 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -681,7 +681,7 @@
* Multiple extruders can be assigned to the same pin in which case
* the fan will turn on when any selected extruder is above the threshold.
*/
-#define E0_AUTO_FAN_PIN -1
+#define E0_AUTO_FAN_PIN P2_04
#define E1_AUTO_FAN_PIN -1
#define E2_AUTO_FAN_PIN -1
#define E3_AUTO_FAN_PIN -1
@@ -859,19 +859,19 @@
* - Define the extra endstop pins here to override defaults. No auto-assignment.
*/
#if HAS_X2_STEPPER && DISABLED(DUAL_X_CARRIAGE)
- //#define INVERT_X2_VS_X_DIR // X2 direction signal is the opposite of X
+ #define INVERT_X2_VS_X_DIR // X2 direction signal is the opposite of X
//#define X_DUAL_ENDSTOPS // X2 has its own endstop
#if ENABLED(X_DUAL_ENDSTOPS)
- //#define X2_STOP_PIN X_MAX_PIN // X2 endstop pin override
+ #define X2_STOP_PIN X_MAX_PIN // X2 endstop pin override
#define X2_ENDSTOP_ADJUSTMENT 0 // X2 offset relative to X endstop
#endif
#endif
#if HAS_Y2_STEPPER
- //#define INVERT_Y2_VS_Y_DIR // Y2 direction signal is the opposite of Y
+ #define INVERT_Y2_VS_Y_DIR // Y2 direction signal is the opposite of Y
//#define Y_DUAL_ENDSTOPS // Y2 has its own endstop
#if ENABLED(Y_DUAL_ENDSTOPS)
- //#define Y2_STOP_PIN Y_MAX_PIN // Y2 endstop pin override
+ #define Y2_STOP_PIN Y_MAX_PIN // Y2 endstop pin override
#define Y2_ENDSTOP_ADJUSTMENT 0 // Y2 offset relative to Y endstop
#endif
#endif
@@ -884,20 +884,20 @@
//#define Z_MULTI_ENDSTOPS // Other Z axes have their own endstops
#if ENABLED(Z_MULTI_ENDSTOPS)
- //#define Z2_STOP_PIN X_MAX_PIN // Z2 endstop pin override
+ #define Z2_STOP_PIN X_MAX_PIN // Z2 endstop pin override
#define Z2_ENDSTOP_ADJUSTMENT 0 // Z2 offset relative to Z endstop
#endif
#ifdef Z3_DRIVER_TYPE
//#define INVERT_Z3_VS_Z_DIR // Z3 direction signal is the opposite of Z
#if ENABLED(Z_MULTI_ENDSTOPS)
- //#define Z3_STOP_PIN Y_MAX_PIN // Z3 endstop pin override
+ #define Z3_STOP_PIN Y_MAX_PIN // Z3 endstop pin override
#define Z3_ENDSTOP_ADJUSTMENT 0 // Z3 offset relative to Z endstop
#endif
#endif
#ifdef Z4_DRIVER_TYPE
//#define INVERT_Z4_VS_Z_DIR // Z4 direction signal is the opposite of Z
#if ENABLED(Z_MULTI_ENDSTOPS)
- //#define Z4_STOP_PIN Z_MAX_PIN // Z4 endstop pin override
+ #define Z4_STOP_PIN Z_MAX_PIN // Z4 endstop pin override
#define Z4_ENDSTOP_ADJUSTMENT 0 // Z4 offset relative to Z endstop
#endif
#endif
@@ -931,7 +931,7 @@
//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (linear=mm, rotational=°) Backoff from endstops after homing
//#define XY_COUNTERPART_BACKOFF_MM 0 // (mm) Backoff X after homing Y, and vice-versa
-//#define QUICK_HOME // If G28 contains XY do a diagonal move first
+#define QUICK_HOME // If G28 contains XY do a diagonal move first
//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X
//#define HOME_Z_FIRST // Home Z first. Requires a real endstop (not a probe).
//#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first
@@ -982,7 +982,7 @@
* differs, a mode set EEPROM write will be completed at initialization.
* Use the option below to force an EEPROM write to a V3.1 probe regardless.
*/
- //#define BLTOUCH_SET_5V_MODE
+ #define BLTOUCH_SET_5V_MODE
// Safety: Enable voltage mode settings in the LCD menu.
//#define BLTOUCH_LCD_VOLTAGE_MENU
@@ -1107,7 +1107,7 @@
* M4: 40 = Clockwise, 41 = Counter-Clockwise
* M5: 50 = Clockwise, 51 = Counter-Clockwise
*/
- #define TRAMMING_SCREW_THREAD 30
+ #define TRAMMING_SCREW_THREAD 40
#endif
@@ -1492,14 +1492,14 @@
#endif
#if HAS_BED_PROBE && ANY(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
- //#define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
+ #define PROBE_OFFSET_WIZARD // Add a Probe Z Offset calibration option to the LCD menu
#if ENABLED(PROBE_OFFSET_WIZARD)
/**
* Enable to init the Probe Z-Offset when starting the Wizard.
* Use a height slightly above the estimated nozzle-to-probe Z offset.
* For example, with an offset of -5, consider a starting height of -4.
*/
- //#define PROBE_OFFSET_WIZARD_START_Z -4.0
+ #define PROBE_OFFSET_WIZARD_START_Z -4.0
// Set a convenient position to do the calibration (probing point and nozzle/bed-distance)
//#define PROBE_OFFSET_WIZARD_XY_POS { X_CENTER, Y_CENTER }
@@ -1528,7 +1528,7 @@
#endif
// Include a page of printer information in the LCD Main Menu
- //#define LCD_INFO_MENU
+ #define LCD_INFO_MENU
#if ENABLED(LCD_INFO_MENU)
//#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
#endif
@@ -1583,12 +1583,12 @@
//#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.
#endif
#if ANY(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE)
- //#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup.
+ #define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup.
#endif
#endif
#if HAS_MARLINUI_U8GLIB
- //#define CUSTOM_STATUS_SCREEN_IMAGE // Show the bitmap in Marlin/_Statusscreen.h on the status screen.
+ #define CUSTOM_STATUS_SCREEN_IMAGE // Show the bitmap in Marlin/_Statusscreen.h on the status screen.
#endif
//#define SOUND_MENU_ITEM // Add a mute option to the LCD menu
@@ -1602,7 +1602,7 @@
//#define LCD_TIMEOUT_TO_STATUS 15000 // (ms)
// Scroll a longer status message into view
- //#define STATUS_MESSAGE_SCROLLING
+ #define STATUS_MESSAGE_SCROLLING
// Apply a timeout to low-priority status messages
//#define STATUS_MESSAGE_TIMEOUT_SEC 30 // (seconds)
@@ -1704,7 +1704,7 @@
//#define SD_DETECT_STATE HIGH
//#define SD_IGNORE_AT_STARTUP // Don't mount the SD card when starting up
- //#define SDCARD_READONLY // Read-only SD card (to save over 2K of flash)
+ #define SDCARD_READONLY // Read-only SD card (to save over 2K of flash)
//#define GCODE_REPEAT_MARKERS // Enable G-code M808 to set repeat markers and do looping
@@ -1811,7 +1811,7 @@
//#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
//#define M20_TIMESTAMP_SUPPORT // Include timestamps by adding the 'T' flag to M20 commands
- //#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu
+ #define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu
//#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!)
@@ -1912,7 +1912,7 @@
*
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
*/
- //#define SDCARD_CONNECTION LCD
+ #define SDCARD_CONNECTION ONBOARD
// Enable if SD detect is rendered useless (e.g., by using an SD extender)
//#define NO_SD_DETECT
@@ -2262,7 +2262,7 @@
*
* Warning: Does not respect endstops!
*/
-//#define BABYSTEPPING
+#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
//#define EP_BABYSTEPPING // M293/M294 babystepping with EMERGENCY_PARSER support
//#define BABYSTEP_WITHOUT_HOMING
@@ -2273,7 +2273,7 @@
#define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep
#define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep
- //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+ #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
@@ -2283,9 +2283,9 @@
#endif
#endif
- //#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
+ #define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
- //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
+ #define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
//#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
@@ -2377,10 +2377,10 @@
* the probe to be unable to reach any points.
*/
#if PROBE_SELECTED && !IS_KINEMATIC
- //#define PROBING_MARGIN_LEFT PROBING_MARGIN
- //#define PROBING_MARGIN_RIGHT PROBING_MARGIN
- //#define PROBING_MARGIN_FRONT PROBING_MARGIN
- //#define PROBING_MARGIN_BACK PROBING_MARGIN
+ #define PROBING_MARGIN_LEFT PROBING_MARGIN
+ #define PROBING_MARGIN_RIGHT PROBING_MARGIN
+ #define PROBING_MARGIN_FRONT PROBING_MARGIN
+ #define PROBING_MARGIN_BACK PROBING_MARGIN
#endif
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
@@ -2884,7 +2884,7 @@
*
* Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park.
*/
-//#define ADVANCED_PAUSE_FEATURE
+#define ADVANCED_PAUSE_FEATURE
#if ENABLED(ADVANCED_PAUSE_FEATURE)
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
@@ -2924,7 +2924,7 @@
//#define FILAMENT_CHANGE_RESUME_ON_INSERT // Automatically continue / load filament when runout sensor is triggered again.
//#define PAUSE_REHEAT_FAST_RESUME // Reduce number of waits by not prompting again post-timeout before continuing.
- //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
+ #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
//#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
@@ -2969,7 +2969,7 @@
#define INTERPOLATE true
#if AXIS_IS_TMC_CONFIG(X)
- #define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
+ #define X_CURRENT 580 // (mA) RMS current. Multiply by 1.414 for peak current.
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
#define X_MICROSTEPS 16 // 0..256
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X
@@ -2989,7 +2989,7 @@
#endif
#if AXIS_IS_TMC_CONFIG(Y)
- #define Y_CURRENT 800
+ #define Y_CURRENT 580
#define Y_CURRENT_HOME Y_CURRENT
#define Y_MICROSTEPS 16
#define Y_RSENSE 0.11
@@ -3009,7 +3009,7 @@
#endif
#if AXIS_IS_TMC_CONFIG(Z)
- #define Z_CURRENT 800
+ #define Z_CURRENT 580
#define Z_CURRENT_HOME Z_CURRENT
#define Z_MICROSTEPS 16
#define Z_RSENSE 0.11
@@ -3109,7 +3109,7 @@
#endif
#if AXIS_IS_TMC_CONFIG(E0)
- #define E0_CURRENT 800
+ #define E0_CURRENT 650
#define E0_MICROSTEPS 16
#define E0_RSENSE 0.11
#define E0_CHAIN_POS -1
@@ -3282,7 +3282,7 @@
#define STEALTHCHOP_U
#define STEALTHCHOP_V
#define STEALTHCHOP_W
- #define STEALTHCHOP_E
+ //#define STEALTHCHOP_E
#endif
/**
@@ -3300,7 +3300,7 @@
* Define your own with:
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below)
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below)
//#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below)
//#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
//#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below)
@@ -3450,7 +3450,7 @@
* Enable M122 debugging command for TMC stepper drivers.
* M122 S0/1 will enable continuous reporting.
*/
- //#define TMC_DEBUG
+ #define TMC_DEBUG
/**
* You can set your own advanced settings by filling in predefined functions.
@@ -4114,10 +4114,10 @@
* Host Prompt Support enables Marlin to use the host for user prompts so
* filament runout and other processes can be managed from the host side.
*/
-//#define HOST_ACTION_COMMANDS
+#define HOST_ACTION_COMMANDS
#if ENABLED(HOST_ACTION_COMMANDS)
//#define HOST_PAUSE_M76 // Tell the host to pause in response to M76
- //#define HOST_PROMPT_SUPPORT // Initiate host prompts to get user feedback
+ #define HOST_PROMPT_SUPPORT // Initiate host prompts to get user feedback
#if ENABLED(HOST_PROMPT_SUPPORT)
//#define HOST_STATUS_NOTIFICATIONS // Send some status messages to the host as notifications
#endif
diff --git a/Marlin/_Bootscreen.h b/Marlin/_Bootscreen.h
new file mode 100644
index 0000000000..17589ea403
--- /dev/null
+++ b/Marlin/_Bootscreen.h
@@ -0,0 +1,121 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Custom Boot Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * https://marlinfw.org/tools/u8glib/converter.html
+ */
+
+#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
+#define CUSTOM_BOOTSCREEN_BMPWIDTH 81
+#define CUSTOM_BOOTSCREEN_INVERTED
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+ B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111,
+ B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111,
+ B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111,
+ B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111,
+ B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111,
+ B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
+ B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111,
+ B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111,
+ B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111,
+ B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
+ B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111,
+ B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111,
+ B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111,
+ B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111,
+ B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111,
+ B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111,
+ B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111,
+ B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111,
+ B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111,
+ B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111,
+ B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111,
+ B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111,
+ B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111,
+ B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111,
+ B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111
+};
+
+// Saves 345 bytes
+#define COMPACT_CUSTOM_BOOTSCREEN
+const unsigned char custom_start_bmp_rle[293] PROGMEM = {
+ 0x1F, 0x13, 0x0F, 0x47, 0x06, 0x0F, 0x3F, 0x14, 0x0F, 0x40, 0x14, 0x0F, 0x40, 0x23, 0x0F, 0x41,
+ 0x13, 0x1F, 0x37, 0x33, 0x32, 0x1F, 0x2B, 0x13, 0xF0, 0x93, 0x02, 0x0F, 0x18, 0x08, 0x75, 0xF0,
+ 0x03, 0x02, 0x0F, 0x17, 0x14, 0x02, 0x19, 0xF0, 0x23, 0x02, 0x0F, 0x18, 0x22, 0x51, 0xF0, 0xA3,
+ 0x02, 0x0F, 0x18, 0xF1, 0x74, 0x02, 0x0F, 0x1B, 0x87, 0xF0, 0x34, 0x02, 0x1F, 0x29, 0xF0, 0x01,
+ 0x24, 0x02, 0x1F, 0x27, 0xF0, 0x21, 0x24, 0x5F, 0x24, 0xF0, 0x50, 0x46, 0x1F, 0x21, 0x75, 0xF0,
+ 0x23, 0x3F, 0x1B, 0x8D, 0xF0, 0x6F, 0x17, 0x6F, 0x04, 0xF0, 0x6F, 0x2D, 0x10, 0xF0, 0x8F, 0x2E,
+ 0xE4, 0x5F, 0x30, 0xC5, 0x4F, 0x33, 0x96, 0x2F, 0x37, 0x67, 0x1F, 0x39, 0x56, 0x1F, 0x3A, 0x46,
+ 0x1F, 0x3B, 0x3F, 0x45, 0x3F, 0x45, 0x30, 0x0F, 0x3B, 0x06, 0x4F, 0x3B, 0x15, 0x4F, 0x36, 0x05,
+ 0x03, 0x3F, 0x39, 0x22, 0x6F, 0x3D, 0x7F, 0xFD, 0x0F, 0x17, 0xF0, 0x1F, 0x0C, 0x3F, 0x18, 0xF0,
+ 0x0F, 0x0A, 0x5F, 0x19, 0x37, 0x1F, 0x0D, 0x2F, 0x1A, 0x37, 0x1F, 0x0D, 0x2F, 0x19, 0x38, 0x0F,
+ 0x0D, 0x2F, 0x1A, 0x3F, 0x17, 0x2F, 0x19, 0x36, 0x16, 0x11, 0x39, 0x30, 0x27, 0x3F, 0x0E, 0x36,
+ 0x04, 0xB6, 0x95, 0x63, 0x9D, 0x36, 0x14, 0x51, 0x34, 0x23, 0x34, 0x22, 0x31, 0xAD, 0xB6, 0x24,
+ 0x23, 0x25, 0x23, 0x14, 0x33, 0x31, 0x1E, 0xB5, 0x33, 0x23, 0x25, 0x23, 0x24, 0x33, 0x2F, 0x03,
+ 0x36, 0x15, 0x24, 0x23, 0x25, 0x22, 0xB3, 0x2F, 0x04, 0x26, 0x15, 0x33, 0x23, 0x25, 0x23, 0x2C,
+ 0x2F, 0x03, 0x3E, 0x24, 0x22, 0x35, 0x22, 0x2C, 0x2F, 0x04, 0x2F, 0x00, 0x23, 0x32, 0x25, 0x32,
+ 0x2C, 0x2F, 0x03, 0x39, 0x12, 0x24, 0x23, 0x25, 0x23, 0x27, 0x02, 0x2F, 0x04, 0x38, 0x13, 0x23,
+ 0x32, 0x34, 0x32, 0x35, 0x13, 0x2F, 0x03, 0x38, 0x13, 0x24, 0x23, 0x34, 0x23, 0x43, 0x13, 0x2F,
+ 0x04, 0x35, 0x42, 0x33, 0x33, 0x50, 0x61, 0x94, 0x2F, 0x01, 0xF0, 0x11, 0x60, 0x63, 0xA4, 0x63,
+ 0x7F, 0x26, 0x3B, 0x3F, 0x0D
+};
diff --git a/Marlin/_Statusscreen.h b/Marlin/_Statusscreen.h
new file mode 100644
index 0000000000..d1e2f4a642
--- /dev/null
+++ b/Marlin/_Statusscreen.h
@@ -0,0 +1,62 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Custom Status Screen bitmap
+ *
+ * Place this file in the root with your configuration files
+ * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
+ *
+ * Use the Marlin Bitmap Converter to make your own:
+ * https://marlinfw.org/tools/u8glib/converter.html
+ */
+
+//
+// Status Screen Logo bitmap
+//
+#define STATUS_LOGO_Y 8
+#define STATUS_LOGO_WIDTH 39
+
+const unsigned char status_logo_bmp[] PROGMEM = {
+ B11111000,B00000001,B10000000,B00000000,B00001100,
+ B01001000,B00000000,B10000000,B00000000,B00010010,
+ B01000011,B11000011,B10001100,B11010000,B00000010,
+ B01110001,B00100100,B10010010,B01100111,B11001100,
+ B01000001,B00100100,B10011110,B01000000,B00000010,
+ B01001001,B00100100,B10010000,B01000000,B00010010,
+ B11111011,B10110011,B11001110,B11100000,B00001100
+};
+
+//
+// Use default bitmaps
+//
+#define STATUS_HOTEND_ANIM
+#define STATUS_BED_ANIM
+#define STATUS_HEATERS_XSPACE 20
+#if HOTENDS < 2
+ #define STATUS_HEATERS_X 48
+ #define STATUS_BED_X 72
+#else
+ #define STATUS_HEATERS_X 40
+ #define STATUS_BED_X 80
+#endif
diff --git a/config/README.md b/config/README.md
index b19527ccc3..985577a30d 100644
--- a/config/README.md
+++ b/config/README.md
@@ -1,9 +1,14 @@
-# Where have all the configurations gone?
+## SKR 1.3 Board
-Marlin configurations for specific machines are now maintained in their own repository at:
+These files configure Marlin for an Ender 3 with `BOARD_BTT_SKR_V1_3` board installed with silent stepper drivers and a BLTouch/CR Touch probe. The probe is configured to use the dedicated BLTouch port on the board, so you can remove the Z endstop entirely.
-## https://github.com/MarlinFirmware/Configurations/tree/bugfix-2.1.x
+Features included:
-Configuration files for use with the nightly `bugfix-2.1.x` branch can be downloaded from:
+ - BLTouch/CR Touch
+ - TMC2208 Stepper Drivers
+ - Advanced Pause for Filament Change (`M600`)
+ - Nozzle Parking
-## https://github.com/MarlinFirmware/Configurations/archive/bugfix-2.1.x.zip
+### Nozzle to Probe Offsets
+
+You'll need to to adjust the `NOZZLE_TO_PROBE_OFFSET` values according to your probe's mounting location. This example is based on the Ender 3 BLTouch mount posted at https://www.thingiverse.com/thing:3584158
diff --git a/platformio.ini b/platformio.ini
index 5249b790f2..1bea9f8f96 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -13,7 +13,7 @@
[platformio]
src_dir = Marlin
boards_dir = buildroot/share/PlatformIO/boards
-default_envs = mega2560
+default_envs = LPC1768
include_dir = Marlin
extra_configs =
Marlin/config.ini
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment