BauMaus_x3msnake_RatRig.md

X3msnake's RatRig BauMaus™ Build Log

• Build Photo Album: - (https://photos.app.goo.gl/kHdqoxurebexyopP9)

---

• RatRig VCore v3.1 - Build Guide: - (https://ratrig.dozuki.com/c/Rat_Rig_V-Core_3.1)
• RatRig VCore v3.1 - Electronics: - (https://docs.ratrig.com/v-core-3-1/v-core-eletronics)
• RatRig VCore v3.1 - Firmware: - (https://os.ratrig.com/docs/introduction/)
• RatRig VCore v3.1 - Comissioning guide: - (https://docs.ratrig.com/commissioning-guides/v-core-3-1)

---

• Board Connections - (https://os.ratrig.com/assets/images/octopus-11-wiring-19beb1b4b4719f7327a629b125c1dade.png)
• EBB42 Toolboard USB / CAN V1.2: - (https://github.com/bigtreetech/EBB)
• EBB42 Assembly (V4) - (https://ratrig.dozuki.com/Guide/12.+Electronics/250)
• RatRig Vcore v3.1 - EBB42 docs: - (https://os.ratrig.com/docs/toolboards/btt/ebb-42-12)
• Smart Filament Sensor v2.0: - (https://github.com/bigtreetech/smart-filament-detection-module)
• Octopus v1.1 F446: - (https://github.com/bigtreetech/BIGTREETECH-OCTOPUS-V1.0)
• Phaetus - Rapido Plus UHF/Black Hotend 2.0: - (https://github.com/Phaetus/Rapido-2/blob/main/)
• SuperPinda: - (https://us.ratrig.com/rat-rig-superpinda-probe-by-pepperl-fuchs-inductive-5vdc-sensor.html)
• BondTech LGX Lite: - (https://www.bondtech.se/product/lgx-lite-large-gears-extruder/)

---

• Geekworm x728 v2.0 UPS - Manual: - (https://wiki.geekworm.com/x728)
• Geekworm x728 v2.0 UPS - Hardware: - (https://wiki.geekworm.com/x728-hardware)
• Geekworm x728 v2.0 UPS - Software: - (https://wiki.geekworm.com/x728-Software)

---

• Theaching Tech: RatRig build playlist

Pressure Advance - What it is and Calibration

https://youtu.be/LVp15eGXwm0?si=BjJhJqsooU3sj1BH

Manual Filament Tuning in orca slicer
https://youtu.be/ymywqch6R8w?si=LQqWeTJQrzyurcgf

https://ellis3dp.com/Print-Tuning-Guide/articles/pressure_linear_advance/pattern_method.html

Power Button - Datasheet

Issues with mainsail disconnecting via wifi

https://www.reddit.com/r/klippers/comments/u5ees8/pi_issue_losing_connection_to_pimainsail_but/
https://github.com/mainsail-crew/sonar

Active heated chamber using the bed underside fans

• https://mods.vorondesign.com/details/28xgztUufAtAfV4XUL5l4w?utm_source=chatgpt.com
• https://www.printables.com/model/945659-ratrig-v-core-31-5015-bed-fan-mounts-for-chamber-h

Probing failure causes bed to crash, it requires endstops wired to the emergency stop but using the emergency command and not m112

https://www.reddit.com/r/klippers/comments/yjsbit/physical_kill_switch/

Potential Solutions for heat chamber isolation and enclosure

https://dynatect.com/categories/machine-tool-protection/machine-way-covers/roll-up-covers/
https://motioncontrolproducts.com/mechanical/bellows-and-machine-covers.html
https://www.cqm-inc.com/linear-rail-covers.html?utm_source=chatgpt.com

Replacing the fabric with poliamide tape for see trough
https://pt.aliexpress.com/item/1005005875080898.html