Created
February 19, 2018 18:40
-
-
Save VincentGijsen/0d9627ec651862353297035150fb95a4 to your computer and use it in GitHub Desktop.
Changes to dts overlay orange-pi-one-for i2c (line 967) for volumio
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| /dts-v1/; | |
| / { | |
| interrupt-parent = <0x1>; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x1>; | |
| model = "Xunlong Orange Pi One"; | |
| compatible = "xunlong,orangepi-one", "allwinner,sun8i-h3"; | |
| sound { | |
| compatible = "simple-audio-card"; | |
| simple-audio-card,format = "i2s"; | |
| simple-audio-card,name = "allwinner,hdmi"; | |
| simple-audio-card,mclk-fs = <0x100>; | |
| status = "okay"; | |
| linux,phandle = <0x3a>; | |
| phandle = <0x3a>; | |
| simple-audio-card,codec { | |
| sound-dai = <0x2>; | |
| }; | |
| simple-audio-card,cpu { | |
| sound-dai = <0x3>; | |
| }; | |
| }; | |
| clocks { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x1>; | |
| ranges; | |
| osc24M_clk { | |
| #clock-cells = <0x0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <0x16e3600>; | |
| clock-output-names = "osc24M"; | |
| linux,phandle = <0x19>; | |
| phandle = <0x19>; | |
| }; | |
| osc32k_clk { | |
| #clock-cells = <0x0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <0x8000>; | |
| clock-output-names = "osc32k"; | |
| linux,phandle = <0x1a>; | |
| phandle = <0x1a>; | |
| }; | |
| internal-osc-clk { | |
| #clock-cells = <0x0>; | |
| compatible = "fixed-clock"; | |
| clock-frequency = <0xf42400>; | |
| clock-accuracy = <0x11e1a300>; | |
| clock-output-names = "iosc"; | |
| linux,phandle = <0x29>; | |
| phandle = <0x29>; | |
| }; | |
| }; | |
| display-engine { | |
| compatible = "allwinner,sun8i-h3-display-engine"; | |
| allwinner,pipelines = <0x4 0x5>; | |
| status = "okay"; | |
| linux,phandle = <0x3b>; | |
| phandle = <0x3b>; | |
| }; | |
| soc { | |
| compatible = "simple-bus"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x1>; | |
| ranges; | |
| clock@1000000 { | |
| reg = <0x1000000 0x100000>; | |
| clocks = <0x6 0x30 0x6 0x65>; | |
| clock-names = "bus", "mod"; | |
| resets = <0x6 0x22>; | |
| #clock-cells = <0x1>; | |
| #reset-cells = <0x1>; | |
| assigned-clocks = <0x6 0x65>; | |
| assigned-clock-parents = <0x6 0xd>; | |
| assigned-clock-rates = <0x19bfcc00>; | |
| compatible = "allwinner,sun8i-a83t-de2-clk"; | |
| linux,phandle = <0x9>; | |
| phandle = <0x9>; | |
| }; | |
| hdmi@1ee0000 { | |
| #sound-dai-cells = <0x0>; | |
| compatible = "allwinner,sun8i-h3-dw-hdmi"; | |
| reg = <0x1ee0000 0x10000 0x1ef0000 0x10000>; | |
| reg-io-width = <0x1>; | |
| interrupts = <0x0 0x58 0x4>; | |
| clocks = <0x6 0x2f 0x6 0x6f 0x6 0x70>; | |
| clock-names = "iahb", "isfr", "ddc"; | |
| resets = <0x6 0x20 0x6 0x21>; | |
| reset-names = "hdmi", "ddc"; | |
| status = "okay"; | |
| linux,phandle = <0x2>; | |
| phandle = <0x2>; | |
| ports { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| port@0 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x0>; | |
| linux,phandle = <0x3c>; | |
| phandle = <0x3c>; | |
| endpoint@0 { | |
| reg = <0x0>; | |
| remote-endpoint = <0x7>; | |
| linux,phandle = <0x10>; | |
| phandle = <0x10>; | |
| }; | |
| }; | |
| port@1 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x1>; | |
| linux,phandle = <0x3d>; | |
| phandle = <0x3d>; | |
| endpoint { | |
| remote-endpoint = <0x8>; | |
| linux,phandle = <0x36>; | |
| phandle = <0x36>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| mixer@1100000 { | |
| compatible = "allwinner,sun8i-h3-de2-mixer0"; | |
| reg = <0x1100000 0x100000>; | |
| clocks = <0x9 0x0 0x9 0x6>; | |
| clock-names = "bus", "mod"; | |
| resets = <0x9 0x0>; | |
| status = "okay"; | |
| linux,phandle = <0x4>; | |
| phandle = <0x4>; | |
| ports { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| port@1 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x1>; | |
| linux,phandle = <0x3e>; | |
| phandle = <0x3e>; | |
| endpoint@0 { | |
| reg = <0x0>; | |
| remote-endpoint = <0xa>; | |
| linux,phandle = <0xe>; | |
| phandle = <0xe>; | |
| }; | |
| endpoint@1 { | |
| reg = <0x1>; | |
| remote-endpoint = <0xb>; | |
| linux,phandle = <0x11>; | |
| phandle = <0x11>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| mixer@1200000 { | |
| compatible = "allwinner,sun8i-h3-de2-mixer1"; | |
| reg = <0x1200000 0x100000>; | |
| clocks = <0x9 0x1 0x9 0x7>; | |
| clock-names = "bus", "mod"; | |
| status = "disabled"; | |
| resets = <0x9 0x2>; | |
| linux,phandle = <0x5>; | |
| phandle = <0x5>; | |
| ports { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| port@1 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x1>; | |
| linux,phandle = <0x3f>; | |
| phandle = <0x3f>; | |
| endpoint@0 { | |
| reg = <0x0>; | |
| remote-endpoint = <0xc>; | |
| linux,phandle = <0xf>; | |
| phandle = <0xf>; | |
| }; | |
| endpoint@1 { | |
| reg = <0x1>; | |
| remote-endpoint = <0xd>; | |
| linux,phandle = <0x12>; | |
| phandle = <0x12>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| syscon@1c00000 { | |
| compatible = "allwinner,sun8i-h3-system-controller", "syscon"; | |
| reg = <0x1c00000 0x1000>; | |
| linux,phandle = <0x1b>; | |
| phandle = <0x1b>; | |
| }; | |
| dma-controller@01c02000 { | |
| compatible = "allwinner,sun8i-h3-dma"; | |
| reg = <0x1c02000 0x1000>; | |
| interrupts = <0x0 0x32 0x4>; | |
| clocks = <0x6 0x15>; | |
| resets = <0x6 0x6>; | |
| #dma-cells = <0x1>; | |
| linux,phandle = <0x1e>; | |
| phandle = <0x1e>; | |
| }; | |
| lcd-controller@1c0c000 { | |
| compatible = "allwinner,sun8i-h3-tcon"; | |
| reg = <0x1c0c000 0x1000>; | |
| interrupts = <0x0 0x56 0x4>; | |
| clocks = <0x6 0x2a 0x6 0x66>; | |
| clock-names = "ahb", "tcon-ch1"; | |
| resets = <0x6 0x1b>; | |
| reset-names = "lcd"; | |
| status = "okay"; | |
| linux,phandle = <0x40>; | |
| phandle = <0x40>; | |
| ports { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| port@0 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x0>; | |
| linux,phandle = <0x41>; | |
| phandle = <0x41>; | |
| endpoint@0 { | |
| reg = <0x0>; | |
| remote-endpoint = <0xe>; | |
| linux,phandle = <0xa>; | |
| phandle = <0xa>; | |
| }; | |
| endpoint@1 { | |
| reg = <0x1>; | |
| remote-endpoint = <0xf>; | |
| linux,phandle = <0xc>; | |
| phandle = <0xc>; | |
| }; | |
| }; | |
| port@1 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x1>; | |
| linux,phandle = <0x42>; | |
| phandle = <0x42>; | |
| endpoint@1 { | |
| reg = <0x1>; | |
| remote-endpoint = <0x10>; | |
| linux,phandle = <0x7>; | |
| phandle = <0x7>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| lcd-controller@1c0d000 { | |
| compatible = "allwinner,sun8i-h3-tcon"; | |
| reg = <0x1c0d000 0x1000>; | |
| interrupts = <0x0 0x57 0x4>; | |
| clocks = <0x6 0x2b 0x6 0x67>; | |
| clock-names = "ahb", "tcon-ch1"; | |
| resets = <0x6 0x1c>; | |
| reset-names = "lcd"; | |
| status = "disabled"; | |
| linux,phandle = <0x43>; | |
| phandle = <0x43>; | |
| ports { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| port@0 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x0>; | |
| linux,phandle = <0x44>; | |
| phandle = <0x44>; | |
| endpoint@0 { | |
| reg = <0x0>; | |
| remote-endpoint = <0x11>; | |
| linux,phandle = <0xb>; | |
| phandle = <0xb>; | |
| }; | |
| endpoint@1 { | |
| reg = <0x1>; | |
| remote-endpoint = <0x12>; | |
| linux,phandle = <0xd>; | |
| phandle = <0xd>; | |
| }; | |
| }; | |
| port@1 { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| reg = <0x1>; | |
| linux,phandle = <0x45>; | |
| phandle = <0x45>; | |
| }; | |
| }; | |
| }; | |
| mmc@01c0f000 { | |
| reg = <0x1c0f000 0x1000>; | |
| resets = <0x6 0x7>; | |
| reset-names = "ahb"; | |
| interrupts = <0x0 0x3c 0x4>; | |
| status = "okay"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| compatible = "allwinner,sun7i-a20-mmc"; | |
| clocks = <0x6 0x16 0x6 0x47 0x6 0x49 0x6 0x48>; | |
| clock-names = "ahb", "mmc", "output", "sample"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x13 0x14>; | |
| vmmc-supply = <0x15>; | |
| bus-width = <0x4>; | |
| cd-gpios = <0x16 0x5 0x6 0x0>; | |
| cd-inverted; | |
| linux,phandle = <0x46>; | |
| phandle = <0x46>; | |
| }; | |
| mmc@01c10000 { | |
| reg = <0x1c10000 0x1000>; | |
| resets = <0x6 0x8>; | |
| reset-names = "ahb"; | |
| interrupts = <0x0 0x3d 0x4>; | |
| status = "disabled"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| compatible = "allwinner,sun7i-a20-mmc"; | |
| clocks = <0x6 0x17 0x6 0x4a 0x6 0x4c 0x6 0x4b>; | |
| clock-names = "ahb", "mmc", "output", "sample"; | |
| linux,phandle = <0x47>; | |
| phandle = <0x47>; | |
| }; | |
| mmc@01c11000 { | |
| reg = <0x1c11000 0x1000>; | |
| resets = <0x6 0x9>; | |
| reset-names = "ahb"; | |
| interrupts = <0x0 0x3e 0x4>; | |
| status = "disabled"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| compatible = "allwinner,sun7i-a20-mmc"; | |
| clocks = <0x6 0x18 0x6 0x4d 0x6 0x4f 0x6 0x4e>; | |
| clock-names = "ahb", "mmc", "output", "sample"; | |
| linux,phandle = <0x48>; | |
| phandle = <0x48>; | |
| }; | |
| usb@01c19000 { | |
| compatible = "allwinner,sun8i-h3-musb"; | |
| reg = <0x1c19000 0x400>; | |
| clocks = <0x6 0x20>; | |
| resets = <0x6 0x11>; | |
| interrupts = <0x0 0x47 0x4>; | |
| interrupt-names = "mc"; | |
| phys = <0x17 0x0>; | |
| phy-names = "usb"; | |
| extcon = <0x17 0x0>; | |
| status = "okay"; | |
| dr_mode = "otg"; | |
| linux,phandle = <0x49>; | |
| phandle = <0x49>; | |
| }; | |
| phy@01c19400 { | |
| compatible = "allwinner,sun8i-h3-usb-phy"; | |
| reg = <0x1c19400 0x2c 0x1c1a800 0x4 0x1c1b800 0x4 0x1c1c800 0x4 0x1c1d800 0x4>; | |
| reg-names = "phy_ctrl", "pmu0", "pmu1", "pmu2", "pmu3"; | |
| clocks = <0x6 0x58 0x6 0x59 0x6 0x5a 0x6 0x5b>; | |
| clock-names = "usb0_phy", "usb1_phy", "usb2_phy", "usb3_phy"; | |
| resets = <0x6 0x0 0x6 0x1 0x6 0x2 0x6 0x3>; | |
| reset-names = "usb0_reset", "usb1_reset", "usb2_reset", "usb3_reset"; | |
| status = "okay"; | |
| #phy-cells = <0x1>; | |
| usb0_id_det-gpios = <0x16 0x6 0xc 0x0>; | |
| usb0_vbus-supply = <0x18>; | |
| linux,phandle = <0x17>; | |
| phandle = <0x17>; | |
| }; | |
| usb@01c1a000 { | |
| compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; | |
| reg = <0x1c1a000 0x100>; | |
| interrupts = <0x0 0x48 0x4>; | |
| clocks = <0x6 0x21 0x6 0x25>; | |
| resets = <0x6 0x12 0x6 0x16>; | |
| status = "okay"; | |
| linux,phandle = <0x4a>; | |
| phandle = <0x4a>; | |
| }; | |
| usb@01c1a400 { | |
| compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; | |
| reg = <0x1c1a400 0x100>; | |
| interrupts = <0x0 0x49 0x4>; | |
| clocks = <0x6 0x21 0x6 0x25 0x6 0x5c>; | |
| resets = <0x6 0x12 0x6 0x16>; | |
| status = "okay"; | |
| linux,phandle = <0x4b>; | |
| phandle = <0x4b>; | |
| }; | |
| usb@01c1b000 { | |
| compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; | |
| reg = <0x1c1b000 0x100>; | |
| interrupts = <0x0 0x4a 0x4>; | |
| clocks = <0x6 0x22 0x6 0x26>; | |
| resets = <0x6 0x13 0x6 0x17>; | |
| phys = <0x17 0x1>; | |
| phy-names = "usb"; | |
| status = "okay"; | |
| linux,phandle = <0x4c>; | |
| phandle = <0x4c>; | |
| }; | |
| usb@01c1b400 { | |
| compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; | |
| reg = <0x1c1b400 0x100>; | |
| interrupts = <0x0 0x4b 0x4>; | |
| clocks = <0x6 0x22 0x6 0x26 0x6 0x5d>; | |
| resets = <0x6 0x13 0x6 0x17>; | |
| phys = <0x17 0x1>; | |
| phy-names = "usb"; | |
| status = "okay"; | |
| linux,phandle = <0x4d>; | |
| phandle = <0x4d>; | |
| }; | |
| usb@01c1c000 { | |
| compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; | |
| reg = <0x1c1c000 0x100>; | |
| interrupts = <0x0 0x4c 0x4>; | |
| clocks = <0x6 0x23 0x6 0x27>; | |
| resets = <0x6 0x14 0x6 0x18>; | |
| phys = <0x17 0x2>; | |
| phy-names = "usb"; | |
| status = "disabled"; | |
| linux,phandle = <0x4e>; | |
| phandle = <0x4e>; | |
| }; | |
| usb@01c1c400 { | |
| compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; | |
| reg = <0x1c1c400 0x100>; | |
| interrupts = <0x0 0x4d 0x4>; | |
| clocks = <0x6 0x23 0x6 0x27 0x6 0x5e>; | |
| resets = <0x6 0x14 0x6 0x18>; | |
| phys = <0x17 0x2>; | |
| phy-names = "usb"; | |
| status = "disabled"; | |
| linux,phandle = <0x4f>; | |
| phandle = <0x4f>; | |
| }; | |
| usb@01c1d000 { | |
| compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; | |
| reg = <0x1c1d000 0x100>; | |
| interrupts = <0x0 0x4e 0x4>; | |
| clocks = <0x6 0x24 0x6 0x28>; | |
| resets = <0x6 0x15 0x6 0x19>; | |
| phys = <0x17 0x3>; | |
| phy-names = "usb"; | |
| status = "disabled"; | |
| linux,phandle = <0x50>; | |
| phandle = <0x50>; | |
| }; | |
| usb@01c1d400 { | |
| compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; | |
| reg = <0x1c1d400 0x100>; | |
| interrupts = <0x0 0x4f 0x4>; | |
| clocks = <0x6 0x24 0x6 0x28 0x6 0x5f>; | |
| resets = <0x6 0x15 0x6 0x19>; | |
| phys = <0x17 0x3>; | |
| phy-names = "usb"; | |
| status = "disabled"; | |
| linux,phandle = <0x51>; | |
| phandle = <0x51>; | |
| }; | |
| clock@01c20000 { | |
| reg = <0x1c20000 0x400>; | |
| clocks = <0x19 0x1a>; | |
| clock-names = "hosc", "losc"; | |
| #clock-cells = <0x1>; | |
| #reset-cells = <0x1>; | |
| compatible = "allwinner,sun8i-h3-ccu"; | |
| linux,phandle = <0x6>; | |
| phandle = <0x6>; | |
| }; | |
| pinctrl@01c20800 { | |
| reg = <0x1c20800 0x400>; | |
| interrupts = <0x0 0xb 0x4 0x0 0x11 0x4>; | |
| clocks = <0x6 0x36 0x19 0x1a>; | |
| clock-names = "apb", "hosc", "losc"; | |
| gpio-controller; | |
| #gpio-cells = <0x3>; | |
| interrupt-controller; | |
| #interrupt-cells = <0x3>; | |
| compatible = "allwinner,sun8i-h3-pinctrl"; | |
| linux,phandle = <0x16>; | |
| phandle = <0x16>; | |
| emac0 { | |
| pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5", "PD7", "PD8", "PD9", "PD10", "PD12", "PD13", "PD15", "PD16", "PD17"; | |
| function = "emac"; | |
| drive-strength = <0x28>; | |
| linux,phandle = <0x52>; | |
| phandle = <0x52>; | |
| }; | |
| i2c0 { | |
| pins = "PA11", "PA12"; | |
| function = "i2c0"; | |
| linux,phandle = <0x26>; | |
| phandle = <0x26>; | |
| }; | |
| i2c1 { | |
| pins = "PA18", "PA19"; | |
| function = "i2c1"; | |
| linux,phandle = <0x27>; | |
| phandle = <0x27>; | |
| }; | |
| i2c2 { | |
| pins = "PE12", "PE13"; | |
| function = "i2c2"; | |
| linux,phandle = <0x28>; | |
| phandle = <0x28>; | |
| }; | |
| i2s0 { | |
| pins = "PA18", "PA19", "PA20", "PA21"; | |
| function = "i2s0"; | |
| linux,phandle = <0x53>; | |
| phandle = <0x53>; | |
| }; | |
| i2s1 { | |
| pins = "PG10", "PG11", "PG12", "PG13"; | |
| function = "i2s1"; | |
| linux,phandle = <0x54>; | |
| phandle = <0x54>; | |
| }; | |
| mmc0@0 { | |
| pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; | |
| function = "mmc0"; | |
| drive-strength = <0x1e>; | |
| bias-pull-up; | |
| linux,phandle = <0x13>; | |
| phandle = <0x13>; | |
| }; | |
| mmc0_cd_pin@0 { | |
| pins = "PF6"; | |
| function = "gpio_in"; | |
| bias-pull-up; | |
| linux,phandle = <0x14>; | |
| phandle = <0x14>; | |
| }; | |
| mmc1@0 { | |
| pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5"; | |
| function = "mmc1"; | |
| drive-strength = <0x1e>; | |
| bias-pull-up; | |
| linux,phandle = <0x55>; | |
| phandle = <0x55>; | |
| }; | |
| mmc2_8bit { | |
| pins = "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC16"; | |
| function = "mmc2"; | |
| drive-strength = <0x1e>; | |
| bias-pull-up; | |
| linux,phandle = <0x56>; | |
| phandle = <0x56>; | |
| }; | |
| spdif@0 { | |
| pins = "PA17"; | |
| function = "spdif"; | |
| linux,phandle = <0x57>; | |
| phandle = <0x57>; | |
| }; | |
| spi0 { | |
| pins = "PC0", "PC1", "PC2", "PC3"; | |
| function = "spi0"; | |
| linux,phandle = <0x1f>; | |
| phandle = <0x1f>; | |
| }; | |
| spi1 { | |
| pins = "PA15", "PA16", "PA14", "PA13"; | |
| function = "spi1"; | |
| linux,phandle = <0x20>; | |
| phandle = <0x20>; | |
| }; | |
| uart0@0 { | |
| pins = "PA4", "PA5"; | |
| function = "uart0"; | |
| linux,phandle = <0x22>; | |
| phandle = <0x22>; | |
| }; | |
| uart1 { | |
| pins = "PG6", "PG7"; | |
| function = "uart1"; | |
| linux,phandle = <0x23>; | |
| phandle = <0x23>; | |
| }; | |
| uart1_rts_cts { | |
| pins = "PG8", "PG9"; | |
| function = "uart1"; | |
| linux,phandle = <0x58>; | |
| phandle = <0x58>; | |
| }; | |
| uart2 { | |
| pins = "PA0", "PA1"; | |
| function = "uart2"; | |
| linux,phandle = <0x24>; | |
| phandle = <0x24>; | |
| }; | |
| uart3 { | |
| pins = "PA13", "PA14"; | |
| function = "uart3"; | |
| linux,phandle = <0x25>; | |
| phandle = <0x25>; | |
| }; | |
| uart3_rts_cts { | |
| pins = "PA15", "PA16"; | |
| function = "uart3"; | |
| linux,phandle = <0x59>; | |
| phandle = <0x59>; | |
| }; | |
| led_pins@0 { | |
| pins = "PA15"; | |
| function = "gpio_out"; | |
| linux,phandle = <0x37>; | |
| phandle = <0x37>; | |
| }; | |
| }; | |
| timer@01c20c00 { | |
| compatible = "allwinner,sun4i-a10-timer"; | |
| reg = <0x1c20c00 0xa0>; | |
| interrupts = <0x0 0x12 0x4 0x0 0x13 0x4>; | |
| clocks = <0x19>; | |
| }; | |
| ethernet@1c30000 { | |
| compatible = "allwinner,sun8i-h3-emac"; | |
| syscon = <0x1b>; | |
| reg = <0x1c30000 0x10000>; | |
| interrupts = <0x0 0x52 0x4>; | |
| interrupt-names = "macirq"; | |
| resets = <0x6 0xc>; | |
| reset-names = "stmmaceth"; | |
| clocks = <0x6 0x1b>; | |
| clock-names = "stmmaceth"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| status = "okay"; | |
| phy-handle = <0x1c>; | |
| phy-mode = "mii"; | |
| allwinner,leds-active-low; | |
| linux,phandle = <0x5a>; | |
| phandle = <0x5a>; | |
| mdio { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| compatible = "snps,dwmac-mdio"; | |
| linux,phandle = <0x1d>; | |
| phandle = <0x1d>; | |
| }; | |
| mdio-mux { | |
| compatible = "allwinner,sun8i-h3-mdio-mux"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| mdio-parent-bus = <0x1d>; | |
| mdio@1 { | |
| compatible = "allwinner,sun8i-h3-mdio-internal"; | |
| reg = <0x1>; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| linux,phandle = <0x5b>; | |
| phandle = <0x5b>; | |
| ethernet-phy@1 { | |
| compatible = "ethernet-phy-ieee802.3-c22"; | |
| reg = <0x1>; | |
| clocks = <0x6 0x43>; | |
| resets = <0x6 0x27>; | |
| linux,phandle = <0x1c>; | |
| phandle = <0x1c>; | |
| }; | |
| }; | |
| mdio@2 { | |
| reg = <0x2>; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| linux,phandle = <0x5c>; | |
| phandle = <0x5c>; | |
| }; | |
| }; | |
| }; | |
| spi@01c68000 { | |
| compatible = "allwinner,sun8i-h3-spi"; | |
| reg = <0x1c68000 0x1000>; | |
| interrupts = <0x0 0x41 0x4>; | |
| clocks = <0x6 0x1e 0x6 0x52>; | |
| clock-names = "ahb", "mod"; | |
| dmas = <0x1e 0x17 0x1e 0x17>; | |
| dma-names = "rx", "tx"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x1f>; | |
| resets = <0x6 0xf>; | |
| status = "disabled"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| linux,phandle = <0x5d>; | |
| phandle = <0x5d>; | |
| }; | |
| spi@01c69000 { | |
| compatible = "allwinner,sun8i-h3-spi"; | |
| reg = <0x1c69000 0x1000>; | |
| interrupts = <0x0 0x42 0x4>; | |
| clocks = <0x6 0x1f 0x6 0x53>; | |
| clock-names = "ahb", "mod"; | |
| dmas = <0x1e 0x18 0x1e 0x18>; | |
| dma-names = "rx", "tx"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x20>; | |
| resets = <0x6 0x10>; | |
| status = "disabled"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| linux,phandle = <0x5e>; | |
| phandle = <0x5e>; | |
| }; | |
| watchdog@01c20ca0 { | |
| compatible = "allwinner,sun6i-a31-wdt"; | |
| reg = <0x1c20ca0 0x20>; | |
| interrupts = <0x0 0x19 0x4>; | |
| linux,phandle = <0x5f>; | |
| phandle = <0x5f>; | |
| }; | |
| spdif@01c21000 { | |
| #sound-dai-cells = <0x0>; | |
| compatible = "allwinner,sun8i-h3-spdif"; | |
| reg = <0x1c21000 0x400>; | |
| interrupts = <0x0 0xc 0x4>; | |
| clocks = <0x6 0x35 0x6 0x57>; | |
| resets = <0x6 0x29>; | |
| clock-names = "apb", "spdif"; | |
| dmas = <0x1e 0x2>; | |
| dma-names = "tx"; | |
| status = "disabled"; | |
| linux,phandle = <0x60>; | |
| phandle = <0x60>; | |
| }; | |
| pwm@01c21400 { | |
| compatible = "allwinner,sun8i-h3-pwm"; | |
| reg = <0x1c21400 0x8>; | |
| clocks = <0x19>; | |
| #pwm-cells = <0x3>; | |
| status = "disabled"; | |
| linux,phandle = <0x61>; | |
| phandle = <0x61>; | |
| }; | |
| i2s@01c22000 { | |
| #sound-dai-cells = <0x0>; | |
| compatible = "allwinner,sun8i-h3-i2s"; | |
| reg = <0x1c22000 0x400>; | |
| interrupts = <0x0 0xd 0x4>; | |
| clocks = <0x6 0x38 0x6 0x54>; | |
| clock-names = "apb", "mod"; | |
| dmas = <0x1e 0x3 0x1e 0x3>; | |
| resets = <0x6 0x2b>; | |
| dma-names = "rx", "tx"; | |
| status = "disabled"; | |
| linux,phandle = <0x62>; | |
| phandle = <0x62>; | |
| }; | |
| i2s@01c22400 { | |
| #sound-dai-cells = <0x0>; | |
| compatible = "allwinner,sun8i-h3-i2s"; | |
| reg = <0x1c22400 0x400>; | |
| interrupts = <0x0 0xe 0x4>; | |
| clocks = <0x6 0x39 0x6 0x55>; | |
| clock-names = "apb", "mod"; | |
| dmas = <0x1e 0x4 0x1e 0x4>; | |
| resets = <0x6 0x2c>; | |
| dma-names = "rx", "tx"; | |
| status = "disabled"; | |
| linux,phandle = <0x63>; | |
| phandle = <0x63>; | |
| }; | |
| i2s@1c22800 { | |
| #sound-dai-cells = <0x0>; | |
| compatible = "allwinner,sun8i-h3-i2s"; | |
| reg = <0x1c22800 0x400>; | |
| interrupts = <0x0 0xf 0x4>; | |
| clocks = <0x6 0x3a 0x6 0x56>; | |
| clock-names = "apb", "mod"; | |
| dmas = <0x1e 0x1b>; | |
| resets = <0x6 0x2d>; | |
| dma-names = "tx"; | |
| status = "okay"; | |
| linux,phandle = <0x3>; | |
| phandle = <0x3>; | |
| }; | |
| codec@01c22c00 { | |
| #sound-dai-cells = <0x0>; | |
| compatible = "allwinner,sun8i-h3-codec"; | |
| reg = <0x1c22c00 0x400>; | |
| interrupts = <0x0 0x1d 0x4>; | |
| clocks = <0x6 0x34 0x6 0x6d>; | |
| clock-names = "apb", "codec"; | |
| resets = <0x6 0x28>; | |
| dmas = <0x1e 0xf 0x1e 0xf>; | |
| dma-names = "rx", "tx"; | |
| allwinner,codec-analog-controls = <0x21>; | |
| status = "disabled"; | |
| linux,phandle = <0x64>; | |
| phandle = <0x64>; | |
| }; | |
| serial@01c28000 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x1c28000 0x400>; | |
| interrupts = <0x0 0x0 0x4>; | |
| reg-shift = <0x2>; | |
| reg-io-width = <0x4>; | |
| clocks = <0x6 0x3e>; | |
| resets = <0x6 0x31>; | |
| dmas = <0x1e 0x6 0x1e 0x6>; | |
| dma-names = "rx", "tx"; | |
| status = "okay"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x22>; | |
| linux,phandle = <0x65>; | |
| phandle = <0x65>; | |
| }; | |
| serial@01c28400 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x1c28400 0x400>; | |
| interrupts = <0x0 0x1 0x4>; | |
| reg-shift = <0x2>; | |
| reg-io-width = <0x4>; | |
| clocks = <0x6 0x3f>; | |
| resets = <0x6 0x32>; | |
| dmas = <0x1e 0x7 0x1e 0x7>; | |
| dma-names = "rx", "tx"; | |
| status = "disabled"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x23>; | |
| linux,phandle = <0x66>; | |
| phandle = <0x66>; | |
| }; | |
| serial@01c28800 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x1c28800 0x400>; | |
| interrupts = <0x0 0x2 0x4>; | |
| reg-shift = <0x2>; | |
| reg-io-width = <0x4>; | |
| clocks = <0x6 0x40>; | |
| resets = <0x6 0x33>; | |
| dmas = <0x1e 0x8 0x1e 0x8>; | |
| dma-names = "rx", "tx"; | |
| status = "disabled"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x24>; | |
| linux,phandle = <0x67>; | |
| phandle = <0x67>; | |
| }; | |
| serial@01c28c00 { | |
| compatible = "snps,dw-apb-uart"; | |
| reg = <0x1c28c00 0x400>; | |
| interrupts = <0x0 0x3 0x4>; | |
| reg-shift = <0x2>; | |
| reg-io-width = <0x4>; | |
| clocks = <0x6 0x41>; | |
| resets = <0x6 0x34>; | |
| dmas = <0x1e 0x9 0x1e 0x9>; | |
| dma-names = "rx", "tx"; | |
| status = "disabled"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x25>; | |
| linux,phandle = <0x68>; | |
| phandle = <0x68>; | |
| }; | |
| i2c@01c2ac00 { | |
| compatible = "allwinner,sun6i-a31-i2c"; | |
| reg = <0x1c2ac00 0x400>; | |
| interrupts = <0x0 0x6 0x4>; | |
| clocks = <0x6 0x3b>; | |
| resets = <0x6 0x2e>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x26>; | |
| status = "okay"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| linux,phandle = <0x69>; | |
| phandle = <0x69>; | |
| }; | |
| i2c@01c2b000 { | |
| compatible = "allwinner,sun6i-a31-i2c"; | |
| reg = <0x1c2b000 0x400>; | |
| interrupts = <0x0 0x7 0x4>; | |
| clocks = <0x6 0x3c>; | |
| resets = <0x6 0x2f>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x27>; | |
| status = "disabled"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| linux,phandle = <0x6a>; | |
| phandle = <0x6a>; | |
| }; | |
| i2c@01c2b400 { | |
| compatible = "allwinner,sun6i-a31-i2c"; | |
| reg = <0x1c2b400 0x400>; | |
| interrupts = <0x0 0x8 0x4>; | |
| clocks = <0x6 0x3d>; | |
| resets = <0x6 0x30>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x28>; | |
| status = "disabled"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| linux,phandle = <0x6b>; | |
| phandle = <0x6b>; | |
| }; | |
| interrupt-controller@01c81000 { | |
| compatible = "arm,gic-400"; | |
| reg = <0x1c81000 0x1000 0x1c82000 0x2000 0x1c84000 0x2000 0x1c86000 0x2000>; | |
| interrupt-controller; | |
| #interrupt-cells = <0x3>; | |
| interrupts = <0x1 0x9 0xf04>; | |
| linux,phandle = <0x1>; | |
| phandle = <0x1>; | |
| }; | |
| rtc@01f00000 { | |
| compatible = "allwinner,sun6i-a31-rtc"; | |
| reg = <0x1f00000 0x54>; | |
| interrupts = <0x0 0x28 0x4 0x0 0x29 0x4>; | |
| linux,phandle = <0x6c>; | |
| phandle = <0x6c>; | |
| }; | |
| clock@1f01400 { | |
| compatible = "allwinner,sun8i-h3-r-ccu"; | |
| reg = <0x1f01400 0x100>; | |
| clocks = <0x19 0x1a 0x29 0x6 0x9>; | |
| clock-names = "hosc", "losc", "iosc", "pll-periph"; | |
| #clock-cells = <0x1>; | |
| #reset-cells = <0x1>; | |
| linux,phandle = <0x2a>; | |
| phandle = <0x2a>; | |
| }; | |
| codec-analog@01f015c0 { | |
| compatible = "allwinner,sun8i-h3-codec-analog"; | |
| reg = <0x1f015c0 0x4>; | |
| linux,phandle = <0x21>; | |
| phandle = <0x21>; | |
| }; | |
| ir@01f02000 { | |
| compatible = "allwinner,sun5i-a13-ir"; | |
| clocks = <0x2a 0x4 0x2a 0xb>; | |
| clock-names = "apb", "ir"; | |
| resets = <0x2a 0x0>; | |
| interrupts = <0x0 0x25 0x4>; | |
| reg = <0x1f02000 0x40>; | |
| status = "disabled"; | |
| linux,phandle = <0x6d>; | |
| phandle = <0x6d>; | |
| }; | |
| i2c@01f02400 { | |
| compatible = "allwinner,sun6i-a31-i2c"; | |
| reg = <0x1f02400 0x400>; | |
| interrupts = <0x0 0x2c 0x4>; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x2b>; | |
| clocks = <0x2a 0x9>; | |
| clock-frequency = <0x186a0>; | |
| resets = <0x2a 0x5>; | |
| status = "disabled"; | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| linux,phandle = <0x6e>; | |
| phandle = <0x6e>; | |
| }; | |
| pinctrl@01f02c00 { | |
| compatible = "allwinner,sun8i-h3-r-pinctrl"; | |
| reg = <0x1f02c00 0x400>; | |
| interrupts = <0x0 0x2d 0x4>; | |
| clocks = <0x2a 0x3 0x19 0x1a>; | |
| clock-names = "apb", "hosc", "losc"; | |
| gpio-controller; | |
| #gpio-cells = <0x3>; | |
| interrupt-controller; | |
| #interrupt-cells = <0x3>; | |
| linux,phandle = <0x35>; | |
| phandle = <0x35>; | |
| ir@0 { | |
| pins = "PL11"; | |
| function = "s_cir_rx"; | |
| linux,phandle = <0x6f>; | |
| phandle = <0x6f>; | |
| }; | |
| r-i2c { | |
| pins = "PL0", "PL1"; | |
| function = "s_i2c"; | |
| linux,phandle = <0x2b>; | |
| phandle = <0x2b>; | |
| }; | |
| led_pins@0 { | |
| pins = "PL10"; | |
| function = "gpio_out"; | |
| linux,phandle = <0x38>; | |
| phandle = <0x38>; | |
| }; | |
| key_pins@0 { | |
| pins = "PL3"; | |
| function = "gpio_in"; | |
| linux,phandle = <0x39>; | |
| phandle = <0x39>; | |
| }; | |
| }; | |
| thermal-sensor@1c25000 { | |
| compatible = "allwinner,sun8i-h3-ths"; | |
| reg = <0x1c25000 0x100>; | |
| clocks = <0x6 0x37 0x6 0x45>; | |
| clock-names = "bus", "mod"; | |
| resets = <0x6 0x2a>; | |
| #thermal-sensor-cells = <0x0>; | |
| #io-channel-cells = <0x0>; | |
| linux,phandle = <0x2f>; | |
| phandle = <0x2f>; | |
| }; | |
| gpu@1c40000 { | |
| compatible = "allwinner,sun8i-h3-mali", "allwinner,sun7i-a20-mali", "arm,mali-400"; | |
| reg = <0x1c40000 0x10000>; | |
| interrupts = <0x0 0x61 0x4 0x0 0x62 0x4 0x0 0x63 0x4 0x0 0x64 0x4 0x0 0x66 0x4 0x0 0x67 0x4 0x0 0x65 0x4>; | |
| interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1", "ppmmu1", "pmu"; | |
| clocks = <0x6 0x31 0x6 0x72>; | |
| clock-names = "bus", "core"; | |
| resets = <0x6 0x23>; | |
| memory-region = <0x2c>; | |
| assigned-clocks = <0x6 0x72>; | |
| assigned-clock-rates = <0x16e36000>; | |
| linux,phandle = <0x70>; | |
| phandle = <0x70>; | |
| }; | |
| }; | |
| opp_table { | |
| compatible = "operating-points-v2"; | |
| opp-shared; | |
| linux,phandle = <0x2d>; | |
| phandle = <0x2d>; | |
| opp@240000000 { | |
| opp-hz = <0x0 0xe4e1c00>; | |
| opp-microvolt = <0xef420 0xef420 0x142440>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp@480000000 { | |
| opp-hz = <0x0 0x1c9c3800>; | |
| opp-microvolt = <0xef420 0xef420 0x142440>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp@648000000 { | |
| opp-hz = <0x0 0x269fb200>; | |
| opp-microvolt = <0xf4240 0xf4240 0x142440>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp@816000000 { | |
| opp-hz = <0x0 0x30a32c00>; | |
| opp-microvolt = <0xf9060 0xf9060 0x142440>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp@912000000 { | |
| opp-hz = <0x0 0x365c0400>; | |
| opp-microvolt = <0xfde80 0xfde80 0x142440>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp@960000000 { | |
| opp-hz = <0x0 0x39387000>; | |
| opp-microvolt = <0x107ac0 0x107ac0 0x142440>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp@1008000000 { | |
| opp-hz = <0x0 0x3c14dc00>; | |
| opp-microvolt = <0x116520 0x116520 0x142440>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp@1104000000 { | |
| opp-hz = <0x0 0x41cdb400>; | |
| opp-microvolt = <0x120160 0x120160 0x142440>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp@1200000000 { | |
| opp-hz = <0x0 0x47868c00>; | |
| opp-microvolt = <0x12ebc0 0x12ebc0 0x142440>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| opp@1296000000 { | |
| opp-hz = <0x0 0x4d3f6400>; | |
| opp-microvolt = <0x142440 0x142440 0x142440>; | |
| clock-latency-ns = <0x3b9b0>; | |
| }; | |
| }; | |
| cpus { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x0>; | |
| cpu@0 { | |
| compatible = "arm,cortex-a7"; | |
| device_type = "cpu"; | |
| reg = <0x0>; | |
| clocks = <0x6 0xe>; | |
| clock-names = "cpu"; | |
| operating-points-v2 = <0x2d>; | |
| cpu-supply = <0x2e>; | |
| #cooling-cells = <0x2>; | |
| linux,phandle = <0x31>; | |
| phandle = <0x31>; | |
| }; | |
| cpu@1 { | |
| compatible = "arm,cortex-a7"; | |
| device_type = "cpu"; | |
| reg = <0x1>; | |
| operating-points-v2 = <0x2d>; | |
| }; | |
| cpu@2 { | |
| compatible = "arm,cortex-a7"; | |
| device_type = "cpu"; | |
| reg = <0x2>; | |
| operating-points-v2 = <0x2d>; | |
| }; | |
| cpu@3 { | |
| compatible = "arm,cortex-a7"; | |
| device_type = "cpu"; | |
| reg = <0x3>; | |
| operating-points-v2 = <0x2d>; | |
| }; | |
| }; | |
| iio-hwmon { | |
| compatible = "iio-hwmon"; | |
| io-channels = <0x2f>; | |
| }; | |
| thermal-zones { | |
| cpu-thermal { | |
| polling-delay-passive = <0xfa>; | |
| polling-delay = <0x3e8>; | |
| thermal-sensors = <0x2f>; | |
| trips { | |
| cpu_warm { | |
| temperature = <0xfde8>; | |
| hysteresis = <0x7d0>; | |
| type = "passive"; | |
| linux,phandle = <0x30>; | |
| phandle = <0x30>; | |
| }; | |
| cpu_hot_pre { | |
| temperature = <0x11170>; | |
| hysteresis = <0x7d0>; | |
| type = "passive"; | |
| linux,phandle = <0x32>; | |
| phandle = <0x32>; | |
| }; | |
| cpu_hot { | |
| temperature = <0x124f8>; | |
| hysteresis = <0x7d0>; | |
| type = "passive"; | |
| linux,phandle = <0x33>; | |
| phandle = <0x33>; | |
| }; | |
| cpu_very_hot_pre { | |
| temperature = <0x14c08>; | |
| hysteresis = <0x7d0>; | |
| type = "passive"; | |
| linux,phandle = <0x71>; | |
| phandle = <0x71>; | |
| }; | |
| cpu_very_hot { | |
| temperature = <0x15f90>; | |
| hysteresis = <0x7d0>; | |
| type = "passive"; | |
| linux,phandle = <0x34>; | |
| phandle = <0x34>; | |
| }; | |
| cpu_crit { | |
| temperature = <0x19a28>; | |
| hysteresis = <0x7d0>; | |
| type = "critical"; | |
| linux,phandle = <0x72>; | |
| phandle = <0x72>; | |
| }; | |
| }; | |
| cooling-maps { | |
| cpu_warm_limit_cpu { | |
| trip = <0x30>; | |
| cooling-device = <0x31 0xffffffff 0x2>; | |
| }; | |
| cpu_hot_pre_limit_cpu { | |
| trip = <0x32>; | |
| cooling-device = <0x31 0x2 0x3>; | |
| }; | |
| cpu_hot_limit_cpu { | |
| trip = <0x33>; | |
| cooling-device = <0x31 0x3 0x4>; | |
| }; | |
| cpu_very_hot_pre_limit_cpu { | |
| trip = <0x34>; | |
| cooling-device = <0x31 0x5 0x6>; | |
| }; | |
| cpu_very_hot_limit_cpu { | |
| trip = <0x34>; | |
| cooling-device = <0x31 0x7 0xffffffff>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| reserved-memory { | |
| #address-cells = <0x1>; | |
| #size-cells = <0x1>; | |
| ranges; | |
| linux,cma { | |
| compatible = "shared-dma-pool"; | |
| reusable; | |
| size = <0x4000000>; | |
| alignment = <0x2000>; | |
| linux,cma-default; | |
| linux,phandle = <0x2c>; | |
| phandle = <0x2c>; | |
| }; | |
| }; | |
| timer { | |
| compatible = "arm,armv7-timer"; | |
| interrupts = <0x1 0xd 0xf08 0x1 0xe 0xf08 0x1 0xb 0xf08 0x1 0xa 0xf08>; | |
| }; | |
| reg_cpu_fallback { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "vdd-cpux-dummy"; | |
| regulator-min-microvolt = <0x124f80>; | |
| regulator-max-microvolt = <0x124f80>; | |
| linux,phandle = <0x73>; | |
| phandle = <0x73>; | |
| }; | |
| ahci-5v { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "ahci-5v"; | |
| regulator-min-microvolt = <0x4c4b40>; | |
| regulator-max-microvolt = <0x4c4b40>; | |
| regulator-boot-on; | |
| enable-active-high; | |
| gpio = <0x16 0x1 0x8 0x0>; | |
| status = "disabled"; | |
| linux,phandle = <0x74>; | |
| phandle = <0x74>; | |
| }; | |
| usb0-vbus { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "usb0-vbus"; | |
| regulator-min-microvolt = <0x4c4b40>; | |
| regulator-max-microvolt = <0x4c4b40>; | |
| enable-active-high; | |
| gpio = <0x35 0x0 0x2 0x0>; | |
| status = "okay"; | |
| linux,phandle = <0x18>; | |
| phandle = <0x18>; | |
| }; | |
| usb1-vbus { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "usb1-vbus"; | |
| regulator-min-microvolt = <0x4c4b40>; | |
| regulator-max-microvolt = <0x4c4b40>; | |
| regulator-boot-on; | |
| enable-active-high; | |
| gpio = <0x16 0x7 0x6 0x0>; | |
| status = "disabled"; | |
| linux,phandle = <0x75>; | |
| phandle = <0x75>; | |
| }; | |
| usb2-vbus { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "usb2-vbus"; | |
| regulator-min-microvolt = <0x4c4b40>; | |
| regulator-max-microvolt = <0x4c4b40>; | |
| regulator-boot-on; | |
| enable-active-high; | |
| gpio = <0x16 0x7 0x3 0x0>; | |
| status = "disabled"; | |
| linux,phandle = <0x76>; | |
| phandle = <0x76>; | |
| }; | |
| vcc3v0 { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "vcc3v0"; | |
| regulator-min-microvolt = <0x2dc6c0>; | |
| regulator-max-microvolt = <0x2dc6c0>; | |
| linux,phandle = <0x77>; | |
| phandle = <0x77>; | |
| }; | |
| vcc3v3 { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "vcc3v3"; | |
| regulator-min-microvolt = <0x325aa0>; | |
| regulator-max-microvolt = <0x325aa0>; | |
| linux,phandle = <0x15>; | |
| phandle = <0x15>; | |
| }; | |
| vcc5v0 { | |
| compatible = "regulator-fixed"; | |
| regulator-name = "vcc5v0"; | |
| regulator-min-microvolt = <0x4c4b40>; | |
| regulator-max-microvolt = <0x4c4b40>; | |
| linux,phandle = <0x78>; | |
| phandle = <0x78>; | |
| }; | |
| aliases { | |
| ethernet0 = "/soc/ethernet@1c30000"; | |
| serial0 = "/soc/serial@01c28000"; | |
| }; | |
| chosen { | |
| stdout-path = "serial0:115200n8"; | |
| }; | |
| connector { | |
| compatible = "hdmi-connector"; | |
| type = [61 00]; | |
| port { | |
| endpoint { | |
| remote-endpoint = <0x36>; | |
| linux,phandle = <0x8>; | |
| phandle = <0x8>; | |
| }; | |
| }; | |
| }; | |
| leds { | |
| compatible = "gpio-leds"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x37 0x38>; | |
| pwr_led { | |
| label = "orangepi:green:pwr"; | |
| gpios = <0x35 0x0 0xa 0x0>; | |
| default-state = "on"; | |
| }; | |
| status_led { | |
| label = "orangepi:red:status"; | |
| gpios = <0x16 0x0 0xf 0x0>; | |
| }; | |
| }; | |
| r_gpio_keys { | |
| compatible = "gpio-keys"; | |
| pinctrl-names = "default"; | |
| pinctrl-0 = <0x39>; | |
| sw4 { | |
| label = "sw4"; | |
| linux,code = <0x100>; | |
| gpios = <0x35 0x0 0x3 0x1>; | |
| }; | |
| }; | |
| gpio-regulator { | |
| compatible = "regulator-gpio"; | |
| regulator-name = "vdd-cpux"; | |
| regulator-type = "voltage"; | |
| regulator-boot-on; | |
| regulator-always-on; | |
| regulator-min-microvolt = <0x10c8e0>; | |
| regulator-max-microvolt = <0x13d620>; | |
| regulator-ramp-delay = <0x32>; | |
| gpios = <0x35 0x0 0x6 0x0>; | |
| enable-active-high; | |
| gpios-states = <0x1>; | |
| states = <0x10c8e0 0x0 0x13d620 0x1>; | |
| linux,phandle = <0x2e>; | |
| phandle = <0x2e>; | |
| }; | |
| __symbols__ { | |
| sound_hdmi = "/sound"; | |
| osc24M = "/clocks/osc24M_clk"; | |
| osc32k = "/clocks/osc32k_clk"; | |
| iosc = "/clocks/internal-osc-clk"; | |
| de = "/display-engine"; | |
| display_clocks = "/soc/clock@1000000"; | |
| hdmi = "/soc/hdmi@1ee0000"; | |
| hdmi_in = "/soc/hdmi@1ee0000/ports/port@0"; | |
| hdmi_in_tcon0 = "/soc/hdmi@1ee0000/ports/port@0/endpoint@0"; | |
| hdmi_out = "/soc/hdmi@1ee0000/ports/port@1"; | |
| hdmi_out_con = "/soc/hdmi@1ee0000/ports/port@1/endpoint"; | |
| mixer0 = "/soc/mixer@1100000"; | |
| mixer0_out = "/soc/mixer@1100000/ports/port@1"; | |
| mixer0_out_tcon0 = "/soc/mixer@1100000/ports/port@1/endpoint@0"; | |
| mixer0_out_tcon1 = "/soc/mixer@1100000/ports/port@1/endpoint@1"; | |
| mixer1 = "/soc/mixer@1200000"; | |
| mixer1_out = "/soc/mixer@1200000/ports/port@1"; | |
| mixer1_out_tcon0 = "/soc/mixer@1200000/ports/port@1/endpoint@0"; | |
| mixer1_out_tcon1 = "/soc/mixer@1200000/ports/port@1/endpoint@1"; | |
| syscon = "/soc/syscon@1c00000"; | |
| dma = "/soc/dma-controller@01c02000"; | |
| tcon0 = "/soc/lcd-controller@1c0c000"; | |
| tcon0_in = "/soc/lcd-controller@1c0c000/ports/port@0"; | |
| tcon0_in_mixer0 = "/soc/lcd-controller@1c0c000/ports/port@0/endpoint@0"; | |
| tcon0_in_mixer1 = "/soc/lcd-controller@1c0c000/ports/port@0/endpoint@1"; | |
| tcon0_out = "/soc/lcd-controller@1c0c000/ports/port@1"; | |
| tcon0_out_hdmi = "/soc/lcd-controller@1c0c000/ports/port@1/endpoint@1"; | |
| tcon1 = "/soc/lcd-controller@1c0d000"; | |
| tcon1_in = "/soc/lcd-controller@1c0d000/ports/port@0"; | |
| tcon1_in_mixer0 = "/soc/lcd-controller@1c0d000/ports/port@0/endpoint@0"; | |
| tcon1_in_mixer1 = "/soc/lcd-controller@1c0d000/ports/port@0/endpoint@1"; | |
| tcon1_out = "/soc/lcd-controller@1c0d000/ports/port@1"; | |
| mmc0 = "/soc/mmc@01c0f000"; | |
| mmc1 = "/soc/mmc@01c10000"; | |
| mmc2 = "/soc/mmc@01c11000"; | |
| usb_otg = "/soc/usb@01c19000"; | |
| usbphy = "/soc/phy@01c19400"; | |
| ehci0 = "/soc/usb@01c1a000"; | |
| ohci0 = "/soc/usb@01c1a400"; | |
| ehci1 = "/soc/usb@01c1b000"; | |
| ohci1 = "/soc/usb@01c1b400"; | |
| ehci2 = "/soc/usb@01c1c000"; | |
| ohci2 = "/soc/usb@01c1c400"; | |
| ehci3 = "/soc/usb@01c1d000"; | |
| ohci3 = "/soc/usb@01c1d400"; | |
| ccu = "/soc/clock@01c20000"; | |
| pio = "/soc/pinctrl@01c20800"; | |
| emac_rgmii_pins = "/soc/pinctrl@01c20800/emac0"; | |
| i2c0_pins = "/soc/pinctrl@01c20800/i2c0"; | |
| i2c1_pins = "/soc/pinctrl@01c20800/i2c1"; | |
| i2c2_pins = "/soc/pinctrl@01c20800/i2c2"; | |
| i2s0_pins = "/soc/pinctrl@01c20800/i2s0"; | |
| i2s1_pins = "/soc/pinctrl@01c20800/i2s1"; | |
| mmc0_pins_a = "/soc/pinctrl@01c20800/mmc0@0"; | |
| mmc0_cd_pin = "/soc/pinctrl@01c20800/mmc0_cd_pin@0"; | |
| mmc1_pins_a = "/soc/pinctrl@01c20800/mmc1@0"; | |
| mmc2_8bit_pins = "/soc/pinctrl@01c20800/mmc2_8bit"; | |
| spdif_tx_pins_a = "/soc/pinctrl@01c20800/spdif@0"; | |
| spi0_pins = "/soc/pinctrl@01c20800/spi0"; | |
| spi1_pins = "/soc/pinctrl@01c20800/spi1"; | |
| uart0_pins_a = "/soc/pinctrl@01c20800/uart0@0"; | |
| uart1_pins = "/soc/pinctrl@01c20800/uart1"; | |
| uart1_rts_cts_pins = "/soc/pinctrl@01c20800/uart1_rts_cts"; | |
| uart2_pins = "/soc/pinctrl@01c20800/uart2"; | |
| uart3_pins = "/soc/pinctrl@01c20800/uart3"; | |
| uart3_rts_cts_pins = "/soc/pinctrl@01c20800/uart3_rts_cts"; | |
| leds_opc = "/soc/pinctrl@01c20800/led_pins@0"; | |
| emac = "/soc/ethernet@1c30000"; | |
| mdio = "/soc/ethernet@1c30000/mdio"; | |
| internal_mdio = "/soc/ethernet@1c30000/mdio-mux/mdio@1"; | |
| int_mii_phy = "/soc/ethernet@1c30000/mdio-mux/mdio@1/ethernet-phy@1"; | |
| external_mdio = "/soc/ethernet@1c30000/mdio-mux/mdio@2"; | |
| spi0 = "/soc/spi@01c68000"; | |
| spi1 = "/soc/spi@01c69000"; | |
| wdt0 = "/soc/watchdog@01c20ca0"; | |
| spdif = "/soc/spdif@01c21000"; | |
| pwm = "/soc/pwm@01c21400"; | |
| i2s0 = "/soc/i2s@01c22000"; | |
| i2s1 = "/soc/i2s@01c22400"; | |
| i2s2 = "/soc/i2s@1c22800"; | |
| codec = "/soc/codec@01c22c00"; | |
| uart0 = "/soc/serial@01c28000"; | |
| uart1 = "/soc/serial@01c28400"; | |
| uart2 = "/soc/serial@01c28800"; | |
| uart3 = "/soc/serial@01c28c00"; | |
| i2c0 = "/soc/i2c@01c2ac00"; | |
| i2c1 = "/soc/i2c@01c2b000"; | |
| i2c2 = "/soc/i2c@01c2b400"; | |
| gic = "/soc/interrupt-controller@01c81000"; | |
| rtc = "/soc/rtc@01f00000"; | |
| r_ccu = "/soc/clock@1f01400"; | |
| codec_analog = "/soc/codec-analog@01f015c0"; | |
| ir = "/soc/ir@01f02000"; | |
| r_i2c = "/soc/i2c@01f02400"; | |
| r_pio = "/soc/pinctrl@01f02c00"; | |
| ir_pins_a = "/soc/pinctrl@01f02c00/ir@0"; | |
| r_i2c_pins = "/soc/pinctrl@01f02c00/r-i2c"; | |
| leds_r_opc = "/soc/pinctrl@01f02c00/led_pins@0"; | |
| sw_r_opc = "/soc/pinctrl@01f02c00/key_pins@0"; | |
| ths = "/soc/thermal-sensor@1c25000"; | |
| mali = "/soc/gpu@1c40000"; | |
| cpu_opp_table = "/opp_table"; | |
| cpu0 = "/cpus/cpu@0"; | |
| cpu_warm = "/thermal-zones/cpu-thermal/trips/cpu_warm"; | |
| cpu_hot_pre = "/thermal-zones/cpu-thermal/trips/cpu_hot_pre"; | |
| cpu_hot = "/thermal-zones/cpu-thermal/trips/cpu_hot"; | |
| cpu_very_hot_pre = "/thermal-zones/cpu-thermal/trips/cpu_very_hot_pre"; | |
| cpu_very_hot = "/thermal-zones/cpu-thermal/trips/cpu_very_hot"; | |
| cpu_crit = "/thermal-zones/cpu-thermal/trips/cpu_crit"; | |
| cma = "/reserved-memory/linux,cma"; | |
| reg_cpu_fallback = "/reg_cpu_fallback"; | |
| reg_ahci_5v = "/ahci-5v"; | |
| reg_usb0_vbus = "/usb0-vbus"; | |
| reg_usb1_vbus = "/usb1-vbus"; | |
| reg_usb2_vbus = "/usb2-vbus"; | |
| reg_vcc3v0 = "/vcc3v0"; | |
| reg_vcc3v3 = "/vcc3v3"; | |
| reg_vcc5v0 = "/vcc5v0"; | |
| hdmi_con_in = "/connector/port/endpoint"; | |
| reg_sy8113b = "/gpio-regulator"; | |
| }; | |
| }; |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment