cura settings for adimlab gantry CR-10 clone

cura.txt

Printer profile based on CR-10 (I believe)

Printer Settings:
X(Width) 300
Y(Depth) 300
Z(Height) 400
Origin at center: no
Heated bed: yes
Heated build volume: no
Gcode: Marlin


Printhead Settings:
X min: -26
Y min: -32
X max: 32
Y max: 34
Gantry height: 25
Extruders: 1
Apply Extruder offsets to gcode: yes


Start G-Code:

M201 X500.00 Y500.00 Z100.00 E5000.00 ;Setup machine max acceleration
M203 X500.00 Y500.00 Z10.00 E50.00 ;Setup machine max feedrate
M204 P500.00 R1000.00 T500.00 ;Setup Print/Retract/Travel acceleration
M205 X8.00 Y8.00 Z0.40 E5.00 ;Setup Jerk
M220 S100 ;Reset Feedrate
M221 S100 ;Reset Flowrate

G28 ;Home

G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up
G1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position
G1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line
G1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little
G1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line
G92 E0 ;Reset Extruder
G1 Z2.0 F3000 ;Move Z Axis up


End G-Code:

G91 ;Relative positioning
G1 E-2 F2700 ;Retract a bit
G1 E-2 Z0.2 F2400 ;Retract and raise Z
G1 X5 Y5 F3000 ;Wipe out
G1 Z10 ;Raise Z more
G90 ;Absolute positioning

G1 X0 Y{machine_depth} ;Present print
M106 S0 ;Turn-off fan
M104 S0 ;Turn-off hotend
M140 S0 ;Turn-off bed

M84 X Y E ;Disable all steppers but Z


Plugins:
- Auto-Orientation by nallath
- Barbarian Units by nallath
- Measure tool by fieldOfView
- Mesh Tools by fieldOfView
- OctoPrint Connection by fieldOfView


Post Processing Scripts:

Go to Extensions > Post Processing > Modify G-Code
Click "Add a script" button
Add "Create Thumbnail"
I set it to 128x128