Created
October 15, 2017 18:17
-
-
Save Gfast2/2df7979d4a09132196c0df0b18c59a5e to your computer and use it in GitHub Desktop.
addressing issue with unmathing baud rate between serial monitor and ESP32
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # | |
| # Automatically generated file; DO NOT EDIT. | |
| # Espressif IoT Development Framework Configuration | |
| # | |
| # | |
| # SDK tool configuration | |
| # | |
| CONFIG_TOOLPREFIX="xtensa-esp32-elf-" | |
| CONFIG_PYTHON="python" | |
| CONFIG_MAKE_WARN_UNDEFINED_VARIABLES=y | |
| # | |
| # Bootloader config | |
| # | |
| CONFIG_LOG_BOOTLOADER_LEVEL_NONE= | |
| CONFIG_LOG_BOOTLOADER_LEVEL_ERROR= | |
| CONFIG_LOG_BOOTLOADER_LEVEL_WARN= | |
| CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y | |
| CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG= | |
| CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE= | |
| CONFIG_LOG_BOOTLOADER_LEVEL=3 | |
| # | |
| # Security features | |
| # | |
| CONFIG_SECURE_BOOT_ENABLED= | |
| CONFIG_FLASH_ENCRYPTION_ENABLED= | |
| # | |
| # Serial flasher config | |
| # | |
| CONFIG_ESPTOOLPY_PORT="/dev/ttyUSB0" | |
| CONFIG_ESPTOOLPY_BAUD_115200B= | |
| CONFIG_ESPTOOLPY_BAUD_230400B= | |
| CONFIG_ESPTOOLPY_BAUD_921600B=y | |
| CONFIG_ESPTOOLPY_BAUD_2MB= | |
| CONFIG_ESPTOOLPY_BAUD_OTHER= | |
| CONFIG_ESPTOOLPY_BAUD_OTHER_VAL=115200 | |
| CONFIG_ESPTOOLPY_BAUD=921600 | |
| CONFIG_ESPTOOLPY_COMPRESSED=y | |
| CONFIG_FLASHMODE_QIO= | |
| CONFIG_FLASHMODE_QOUT= | |
| CONFIG_FLASHMODE_DIO=y | |
| CONFIG_FLASHMODE_DOUT= | |
| CONFIG_ESPTOOLPY_FLASHMODE="dio" | |
| CONFIG_ESPTOOLPY_FLASHFREQ_80M= | |
| CONFIG_ESPTOOLPY_FLASHFREQ_40M=y | |
| CONFIG_ESPTOOLPY_FLASHFREQ_26M= | |
| CONFIG_ESPTOOLPY_FLASHFREQ_20M= | |
| CONFIG_ESPTOOLPY_FLASHFREQ="40m" | |
| CONFIG_ESPTOOLPY_FLASHSIZE_1MB= | |
| CONFIG_ESPTOOLPY_FLASHSIZE_2MB= | |
| CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y | |
| CONFIG_ESPTOOLPY_FLASHSIZE_8MB= | |
| CONFIG_ESPTOOLPY_FLASHSIZE_16MB= | |
| CONFIG_ESPTOOLPY_FLASHSIZE="4MB" | |
| CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y | |
| CONFIG_ESPTOOLPY_BEFORE_RESET=y | |
| CONFIG_ESPTOOLPY_BEFORE_NORESET= | |
| CONFIG_ESPTOOLPY_BEFORE="default_reset" | |
| CONFIG_ESPTOOLPY_AFTER_RESET=y | |
| CONFIG_ESPTOOLPY_AFTER_NORESET= | |
| CONFIG_ESPTOOLPY_AFTER="hard_reset" | |
| CONFIG_MONITOR_BAUD_9600B= | |
| CONFIG_MONITOR_BAUD_57600B= | |
| CONFIG_MONITOR_BAUD_115200B= | |
| CONFIG_MONITOR_BAUD_230400B= | |
| CONFIG_MONITOR_BAUD_921600B=y | |
| CONFIG_MONITOR_BAUD_2MB= | |
| CONFIG_MONITOR_BAUD_OTHER= | |
| CONFIG_MONITOR_BAUD_OTHER_VAL=115200 | |
| CONFIG_MONITOR_BAUD=921600 | |
| # | |
| # Example Configuration | |
| # | |
| CONFIG_PHY_TLK110= | |
| CONFIG_PHY_LAN8720=y | |
| CONFIG_PHY_ADDRESS=31 | |
| CONFIG_PHY_USE_POWER_PIN=y | |
| CONFIG_PHY_POWER_PIN=4 | |
| CONFIG_PHY_SMI_MDC_PIN=23 | |
| CONFIG_PHY_SMI_MDIO_PIN=18 | |
| # | |
| # Partition Table | |
| # | |
| CONFIG_PARTITION_TABLE_SINGLE_APP=y | |
| CONFIG_PARTITION_TABLE_TWO_OTA= | |
| CONFIG_PARTITION_TABLE_CUSTOM= | |
| CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv" | |
| CONFIG_PARTITION_TABLE_CUSTOM_APP_BIN_OFFSET=0x10000 | |
| CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv" | |
| CONFIG_APP_OFFSET=0x10000 | |
| # | |
| # Compiler options | |
| # | |
| CONFIG_OPTIMIZATION_LEVEL_DEBUG=y | |
| CONFIG_OPTIMIZATION_LEVEL_RELEASE= | |
| CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y | |
| CONFIG_OPTIMIZATION_ASSERTIONS_SILENT= | |
| CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED= | |
| # | |
| # Component config | |
| # | |
| # | |
| # Application Level Tracing | |
| # | |
| CONFIG_ESP32_APPTRACE_DEST_TRAX= | |
| CONFIG_ESP32_APPTRACE_DEST_NONE=y | |
| CONFIG_ESP32_APPTRACE_ENABLE= | |
| CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y | |
| # | |
| # FreeRTOS SystemView Tracing | |
| # | |
| CONFIG_AWS_IOT_SDK= | |
| CONFIG_BT_ENABLED= | |
| CONFIG_BT_RESERVE_DRAM=0 | |
| # | |
| # ESP32-specific | |
| # | |
| CONFIG_ESP32_DEFAULT_CPU_FREQ_80= | |
| CONFIG_ESP32_DEFAULT_CPU_FREQ_160= | |
| CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y | |
| CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=240 | |
| CONFIG_MEMMAP_SMP=y | |
| CONFIG_SPIRAM_SUPPORT= | |
| CONFIG_MEMMAP_TRACEMEM= | |
| CONFIG_MEMMAP_TRACEMEM_TWOBANKS= | |
| CONFIG_ESP32_TRAX= | |
| CONFIG_TRACEMEM_RESERVE_DRAM=0x0 | |
| CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH= | |
| CONFIG_ESP32_ENABLE_COREDUMP_TO_UART= | |
| CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y | |
| CONFIG_ESP32_ENABLE_COREDUMP= | |
| CONFIG_TWO_UNIVERSAL_MAC_ADDRESS= | |
| CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y | |
| CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4 | |
| CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32 | |
| CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=4096 | |
| CONFIG_MAIN_TASK_STACK_SIZE=4096 | |
| CONFIG_IPC_TASK_STACK_SIZE=1024 | |
| CONFIG_TIMER_TASK_STACK_SIZE=4096 | |
| CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y | |
| CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF= | |
| CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR= | |
| CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF= | |
| CONFIG_NEWLIB_STDIN_LINE_ENDING_LF= | |
| CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y | |
| CONFIG_NEWLIB_NANO_FORMAT= | |
| CONFIG_CONSOLE_UART_DEFAULT=y | |
| CONFIG_CONSOLE_UART_CUSTOM= | |
| CONFIG_CONSOLE_UART_NONE= | |
| CONFIG_CONSOLE_UART_NUM=0 | |
| CONFIG_CONSOLE_UART_BAUDRATE=115200 | |
| CONFIG_ULP_COPROC_ENABLED= | |
| CONFIG_ULP_COPROC_RESERVE_MEM=0 | |
| CONFIG_ESP32_PANIC_PRINT_HALT= | |
| CONFIG_ESP32_PANIC_PRINT_REBOOT=y | |
| CONFIG_ESP32_PANIC_SILENT_REBOOT= | |
| CONFIG_ESP32_PANIC_GDBSTUB= | |
| CONFIG_ESP32_DEBUG_OCDAWARE=y | |
| CONFIG_INT_WDT=y | |
| CONFIG_INT_WDT_TIMEOUT_MS=300 | |
| CONFIG_INT_WDT_CHECK_CPU1=y | |
| CONFIG_TASK_WDT=y | |
| CONFIG_TASK_WDT_PANIC= | |
| CONFIG_TASK_WDT_TIMEOUT_S=5 | |
| CONFIG_TASK_WDT_CHECK_IDLE_TASK=y | |
| CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y | |
| CONFIG_BROWNOUT_DET=y | |
| CONFIG_BROWNOUT_DET_LVL_SEL_0=y | |
| CONFIG_BROWNOUT_DET_LVL_SEL_1= | |
| CONFIG_BROWNOUT_DET_LVL_SEL_2= | |
| CONFIG_BROWNOUT_DET_LVL_SEL_3= | |
| CONFIG_BROWNOUT_DET_LVL_SEL_4= | |
| CONFIG_BROWNOUT_DET_LVL_SEL_5= | |
| CONFIG_BROWNOUT_DET_LVL_SEL_6= | |
| CONFIG_BROWNOUT_DET_LVL_SEL_7= | |
| CONFIG_BROWNOUT_DET_LVL=0 | |
| CONFIG_ESP32_TIME_SYSCALL_USE_RTC= | |
| CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y | |
| CONFIG_ESP32_TIME_SYSCALL_USE_FRC1= | |
| CONFIG_ESP32_TIME_SYSCALL_USE_NONE= | |
| CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y | |
| CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL= | |
| CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024 | |
| CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000 | |
| CONFIG_ESP32_XTAL_FREQ_40=y | |
| CONFIG_ESP32_XTAL_FREQ_26= | |
| CONFIG_ESP32_XTAL_FREQ_AUTO= | |
| CONFIG_ESP32_XTAL_FREQ=40 | |
| CONFIG_DISABLE_BASIC_ROM_CONSOLE= | |
| CONFIG_NO_BLOBS= | |
| # | |
| # Wi-Fi | |
| # | |
| CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10 | |
| CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32 | |
| CONFIG_ESP32_WIFI_STATIC_TX_BUFFER= | |
| CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER=y | |
| CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=1 | |
| CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM=32 | |
| CONFIG_ESP32_WIFI_AMPDU_ENABLED=y | |
| CONFIG_ESP32_WIFI_TX_BA_WIN=6 | |
| CONFIG_ESP32_WIFI_RX_BA_WIN=6 | |
| CONFIG_ESP32_WIFI_NVS_ENABLED=y | |
| # | |
| # PHY | |
| # | |
| CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y | |
| CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION= | |
| CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20 | |
| CONFIG_ESP32_PHY_MAX_TX_POWER=20 | |
| # | |
| # Ethernet | |
| # | |
| CONFIG_DMA_RX_BUF_NUM=10 | |
| CONFIG_DMA_TX_BUF_NUM=10 | |
| CONFIG_EMAC_L2_TO_L3_RX_BUF_MODE= | |
| CONFIG_EMAC_TASK_PRIORITY=20 | |
| # | |
| # FAT Filesystem support | |
| # | |
| CONFIG_FATFS_CODEPAGE_ASCII=y | |
| CONFIG_FATFS_CODEPAGE_437= | |
| CONFIG_FATFS_CODEPAGE_720= | |
| CONFIG_FATFS_CODEPAGE_737= | |
| CONFIG_FATFS_CODEPAGE_771= | |
| CONFIG_FATFS_CODEPAGE_775= | |
| CONFIG_FATFS_CODEPAGE_850= | |
| CONFIG_FATFS_CODEPAGE_852= | |
| CONFIG_FATFS_CODEPAGE_855= | |
| CONFIG_FATFS_CODEPAGE_857= | |
| CONFIG_FATFS_CODEPAGE_860= | |
| CONFIG_FATFS_CODEPAGE_861= | |
| CONFIG_FATFS_CODEPAGE_862= | |
| CONFIG_FATFS_CODEPAGE_863= | |
| CONFIG_FATFS_CODEPAGE_864= | |
| CONFIG_FATFS_CODEPAGE_865= | |
| CONFIG_FATFS_CODEPAGE_866= | |
| CONFIG_FATFS_CODEPAGE_869= | |
| CONFIG_FATFS_CODEPAGE_932= | |
| CONFIG_FATFS_CODEPAGE_936= | |
| CONFIG_FATFS_CODEPAGE_949= | |
| CONFIG_FATFS_CODEPAGE_950= | |
| CONFIG_FATFS_CODEPAGE=1 | |
| CONFIG_FATFS_MAX_LFN=255 | |
| # | |
| # FreeRTOS | |
| # | |
| CONFIG_FREERTOS_UNICORE= | |
| CONFIG_FREERTOS_CORETIMER_0=y | |
| CONFIG_FREERTOS_CORETIMER_1= | |
| CONFIG_FREERTOS_HZ=100 | |
| CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y | |
| CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE= | |
| CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL= | |
| CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y | |
| CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK= | |
| CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y | |
| CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1 | |
| CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y | |
| CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE= | |
| CONFIG_FREERTOS_ASSERT_DISABLE= | |
| CONFIG_FREERTOS_BREAK_ON_SCHEDULER_START_JTAG= | |
| CONFIG_ENABLE_MEMORY_DEBUG= | |
| CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1024 | |
| CONFIG_FREERTOS_ISR_STACKSIZE=1536 | |
| CONFIG_FREERTOS_LEGACY_HOOKS= | |
| CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16 | |
| CONFIG_SUPPORT_STATIC_ALLOCATION= | |
| CONFIG_TIMER_TASK_PRIORITY=1 | |
| CONFIG_TIMER_TASK_STACK_DEPTH=2048 | |
| CONFIG_TIMER_QUEUE_LENGTH=10 | |
| CONFIG_FREERTOS_DEBUG_INTERNALS= | |
| # | |
| # Heap memory debugging | |
| # | |
| CONFIG_HEAP_POISONING_DISABLED=y | |
| CONFIG_HEAP_POISONING_LIGHT= | |
| CONFIG_HEAP_POISONING_COMPREHENSIVE= | |
| CONFIG_HEAP_TRACING= | |
| # | |
| # Log output | |
| # | |
| CONFIG_LOG_DEFAULT_LEVEL_NONE= | |
| CONFIG_LOG_DEFAULT_LEVEL_ERROR= | |
| CONFIG_LOG_DEFAULT_LEVEL_WARN= | |
| CONFIG_LOG_DEFAULT_LEVEL_INFO=y | |
| CONFIG_LOG_DEFAULT_LEVEL_DEBUG= | |
| CONFIG_LOG_DEFAULT_LEVEL_VERBOSE= | |
| CONFIG_LOG_DEFAULT_LEVEL=3 | |
| CONFIG_LOG_COLORS=y | |
| # | |
| # LWIP | |
| # | |
| CONFIG_L2_TO_L3_COPY= | |
| CONFIG_LWIP_MAX_SOCKETS=10 | |
| CONFIG_LWIP_THREAD_LOCAL_STORAGE_INDEX=0 | |
| CONFIG_LWIP_SO_REUSE= | |
| CONFIG_LWIP_SO_RCVBUF= | |
| CONFIG_LWIP_DHCP_MAX_NTP_SERVERS=1 | |
| CONFIG_LWIP_IP_FRAG= | |
| CONFIG_LWIP_IP_REASSEMBLY= | |
| # | |
| # TCP | |
| # | |
| CONFIG_TCP_MAXRTX=12 | |
| CONFIG_TCP_SYNMAXRTX=6 | |
| CONFIG_TCP_MSS=1436 | |
| CONFIG_TCP_MSL=60000 | |
| CONFIG_TCP_SND_BUF_DEFAULT=5744 | |
| CONFIG_TCP_WND_DEFAULT=5744 | |
| CONFIG_TCP_RECVMBOX_SIZE=6 | |
| CONFIG_TCP_QUEUE_OOSEQ=y | |
| CONFIG_TCP_OVERSIZE_MSS=y | |
| CONFIG_TCP_OVERSIZE_QUARTER_MSS= | |
| CONFIG_TCP_OVERSIZE_DISABLE= | |
| # | |
| # UDP | |
| # | |
| CONFIG_UDP_RECVMBOX_SIZE=6 | |
| CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y | |
| CONFIG_TCPIP_TASK_STACK_SIZE=2560 | |
| CONFIG_PPP_SUPPORT= | |
| # | |
| # ICMP | |
| # | |
| CONFIG_LWIP_MULTICAST_PING= | |
| CONFIG_LWIP_BROADCAST_PING= | |
| # | |
| # mbedTLS | |
| # | |
| CONFIG_MBEDTLS_SSL_MAX_CONTENT_LEN=16384 | |
| CONFIG_MBEDTLS_DEBUG= | |
| CONFIG_MBEDTLS_HARDWARE_AES=y | |
| CONFIG_MBEDTLS_HARDWARE_MPI= | |
| CONFIG_MBEDTLS_HARDWARE_SHA= | |
| CONFIG_MBEDTLS_HAVE_TIME=y | |
| CONFIG_MBEDTLS_HAVE_TIME_DATE= | |
| CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y | |
| CONFIG_MBEDTLS_TLS_SERVER_ONLY= | |
| CONFIG_MBEDTLS_TLS_CLIENT_ONLY= | |
| CONFIG_MBEDTLS_TLS_DISABLED= | |
| CONFIG_MBEDTLS_TLS_SERVER=y | |
| CONFIG_MBEDTLS_TLS_CLIENT=y | |
| CONFIG_MBEDTLS_TLS_ENABLED=y | |
| # | |
| # TLS Key Exchange Methods | |
| # | |
| CONFIG_MBEDTLS_PSK_MODES= | |
| CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y | |
| CONFIG_MBEDTLS_KEY_EXCHANGE_DHE_RSA=y | |
| CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y | |
| CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y | |
| CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y | |
| CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y | |
| CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y | |
| CONFIG_MBEDTLS_SSL_RENEGOTIATION=y | |
| CONFIG_MBEDTLS_SSL_PROTO_SSL3= | |
| CONFIG_MBEDTLS_SSL_PROTO_TLS1=y | |
| CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y | |
| CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y | |
| CONFIG_MBEDTLS_SSL_PROTO_DTLS= | |
| CONFIG_MBEDTLS_SSL_ALPN=y | |
| CONFIG_MBEDTLS_SSL_SESSION_TICKETS=y | |
| # | |
| # Symmetric Ciphers | |
| # | |
| CONFIG_MBEDTLS_AES_C=y | |
| CONFIG_MBEDTLS_CAMELLIA_C= | |
| CONFIG_MBEDTLS_DES_C= | |
| CONFIG_MBEDTLS_RC4_DISABLED=y | |
| CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT= | |
| CONFIG_MBEDTLS_RC4_ENABLED= | |
| CONFIG_MBEDTLS_BLOWFISH_C= | |
| CONFIG_MBEDTLS_XTEA_C= | |
| CONFIG_MBEDTLS_CCM_C=y | |
| CONFIG_MBEDTLS_GCM_C=y | |
| CONFIG_MBEDTLS_RIPEMD160_C= | |
| # | |
| # Certificates | |
| # | |
| CONFIG_MBEDTLS_PEM_PARSE_C=y | |
| CONFIG_MBEDTLS_PEM_WRITE_C=y | |
| CONFIG_MBEDTLS_X509_CRL_PARSE_C=y | |
| CONFIG_MBEDTLS_X509_CSR_PARSE_C=y | |
| CONFIG_MBEDTLS_ECP_C=y | |
| CONFIG_MBEDTLS_ECDH_C=y | |
| CONFIG_MBEDTLS_ECDSA_C=y | |
| CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y | |
| CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y | |
| CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y | |
| CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y | |
| CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y | |
| CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y | |
| CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y | |
| CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y | |
| CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y | |
| CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y | |
| CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y | |
| CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y | |
| CONFIG_MBEDTLS_ECP_NIST_OPTIM=y | |
| # | |
| # OpenSSL | |
| # | |
| CONFIG_OPENSSL_DEBUG= | |
| CONFIG_OPENSSL_ASSERT_DO_NOTHING=y | |
| CONFIG_OPENSSL_ASSERT_EXIT= | |
| # | |
| # PThreads | |
| # | |
| CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5 | |
| CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=2048 | |
| # | |
| # SPI Flash driver | |
| # | |
| CONFIG_SPI_FLASH_ENABLE_COUNTERS= | |
| CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y | |
| # | |
| # tcpip adapter | |
| # | |
| CONFIG_IP_LOST_TIMER_INTERVAL=120 | |
| # | |
| # Wear Levelling | |
| # | |
| CONFIG_WL_SECTOR_SIZE_512= | |
| CONFIG_WL_SECTOR_SIZE_4096=y | |
| CONFIG_WL_SECTOR_SIZE=4096 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment