nuess0r

Btrfs in RAID1 as a root filesystem on Debian

Migrating Debian from a single disk with ext4 to two disks with btrfs and RAID1.

Source: https://gist.github.com/jirutka/990d25662e729669b3ce (for Gentoo and syslinux)

Partitioning scheme

Partition	Filesystem	Size	Description

nuess0r

# Smoothieboard configuration file, see http://smoothieware.org/configuring-smoothie
# NOTE Lines must not exceed 132 characters, and '#' characters mean what follows is ignored
## Robot module configurations : general handling of movement G-codes and slicing into moves

# Basic motion configuration
default_feed_rate                            4000             # Default speed (mm/minute) for G1/G2/G3 moves
default_seek_rate                            4000             # Default speed (mm/minute) for G0 moves
mm_per_arc_segment                           0.0              # Fixed length for line segments that divide arcs, 0 to disable
#mm_per_line_segment                         5                # Cut lines into segments this size
mm_max_arc_error                             0.01             # The maximum error for line segments that divide arcs 0 to disable

nuess0r

#!/bin/sh
# kFreeBSD do not accept scripts as interpreters, using #!/bin/sh and sourcing.
if [ true != "$INIT_D_SCRIPT_SOURCED" ] ; then
    set "$0" "$@"; INIT_D_SCRIPT_SOURCED=true . /lib/init/init-d-script
fi
### BEGIN INIT INFO
# Provides:          skeleton
# Required-Start:    $remote_fs $syslog $network
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5