Install and configure sshuttle on OpenWrt

sshuttle-openwrt.md

Install and configure sshuttle on OpenWrt

Configure extroot

Before you can install sshuttle, you'll need to add some space. Pop a USB drive in the back of the router and follow these directions.

Once you have the space, install sshuttle:

root@OpenWrt:~# opkg update
root@OpenWrt:~# opkg install python3 python3-pip iptables-mod-extra iptables-mod-nat-extra iptables-mod-ipopt
root@OpenWrt:~# python3 /usr/bin/pip3 install sshuttle

Create a wifi access point

I really wanted a wireless access point that tunneled everything on it through sshuttle. To do that, you'll need to add a Static IP interface, and give it a unique block of DHCP addresses to give clients. I used 192.168.2.0/24. The interface should be in the lan firewall group and bridge to the wan port.

Next, create a wifi access point that uses your new interface.

Generate an ssh key

Generate an ssh key to add to authorized keys on the remote server:

root@OpenWrt:~# dropbearkey -t rsa -f /root/.ssh/id_rsa

Create sshuttle.conf

Create a file called sshuttle.conf that looks something like this:

-D
-v
0/0
-l
0.0.0.0:12345
--ns-hosts
192.168.2.1
-e
ssh -i /root/.ssh/id_rsa
-r
you@remote-host
-x
192.168.0.0/16

Start sshuttle

You should be set. To start sshuttle, run:

root@OpenWrt:~# sshuttle @sshuttle.conf

If everything is working, then everything passing through the router should be tunneled. To restrict tunneling to just the 192.168.2.1/24 subnet, you'll need to add an iptables rule:

root@OpenWrt:~# iptables -t nat -I sshuttle-12345 -j RETURN \! --src 192.168.2.0/24

You can see the iptables rules for sshuttle with the following command:

root@OpenWrt:~# iptables -t nat -L sshuttle-12345
Chain sshuttle-12345 (2 references)
target     prot opt source               destination         
RETURN     all  -- !192.168.2.0/24       anywhere            
RETURN    !udp  --  anywhere             anywhere             ADDRTYPE match dst-type LOCAL
RETURN     udp  --  anywhere             anywhere             ADDRTYPE match dst-type LOCAL udp dpt:!domain
RETURN     tcp  --  anywhere             192.168.0.0/16      
REDIRECT   tcp  --  anywhere             anywhere             TTL match TTL != 63 redir ports 12345
REDIRECT   udp  --  anywhere             OpenWrt.lan          udp dpt:domain TTL match TTL != 63 redir ports 12299

It would be great if you can merge the instruction with official https://sshuttle.readthedocs.io/en/stable/openwrt.html

Is any significant difference with pppossh?
It works with dropbear and uses openwrt protocols support.

I forked the instruction and changed id_rsa to id_ed25519 https://github.com/stokito/gist-sshuttle-openwrt/blob/master/sshuttle-openwrt.md